エドガーで原本を確認する
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 8-K
CURRENT REPORT
Pursuant to Section 13 or 15(d)
of the Securities Exchange Act of 1934
Date of report (Date of earliest event reported): April 28, 2025
CSW INDUSTRIALS, INC.
(Exact name of registrant as specified in charter)
| Delaware | 001-37454 | 47-2266942 | ||
| (State or other jurisdiction of incorporation) |
(Commission File Number) |
(IRS Employer Identification No.) |
5420 Lyndon B. Johnson Freeway, Suite 500
Dallas, Texas 75240
(Address of principal executive offices) (Zip Code)
Registrant’s telephone number, including area code: (214) 884-3777
Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2. below):
| ☐ | Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425) |
| ☐ | Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12) |
| ☐ | Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b)) |
| ☐ | Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c)) |
Securities registered pursuant to Section 12(b) of the Act:
| Title of each class |
Trading |
Name of each exchange |
||
| Common Stock, par value $0.01 per share | CSWI | Nasdaq Stock Market LLC |
Indicate by check mark whether the registrant is an emerging growth company as defined by Rule 405 of the Securities Act of 1933 (§230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2 of this chapter).
Emerging growth company ☐
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
| Item 2.01 | Completion of Acquisition or Disposition of Assets |
As previously announced, RectorSeal, LLC, a Delaware limited liability company and wholly owned subsidiary of CSW Industrials, Inc., a Delaware corporation (“RectorSeal” and the “Company”, respectively), and RS Acquisition Sub, LLC, a Delaware limited liability company and wholly owned subsidiary of RectorSeal (“Merger Sub”), entered into an Agreement and Plan of Merger (the “Merger Agreement”), dated as of March 17, 2025, by and among RectorSeal, Merger Sub, Aspen Manufacturing, LLC, a Texas limited liability company (“Aspen”), and Michael Kutsch, as Holder Representative.
On May 1, 2025, pursuant to the terms of the Merger Agreement, Merger Sub merged with and into Aspen, with Aspen surviving the merger as a wholly owned subsidiary of RectorSeal (the “Merger”). At the effective time of the Merger, each outstanding unit of equity in Aspen was cancelled and converted into the right to receive a portion of the cash purchase price of $313.5 million, subject to customary adjustments, including, among others, in respect of indebtedness and working capital of Aspen. In accordance with the terms of the Merger Agreement, $8 million of the Merger Consideration was deposited by RectorSeal into an escrow account to secure the payment of post-closing adjustments and certain specified indemnities under the Merger Agreement.
The foregoing description of the Merger Agreement and the transactions contemplated thereby, including the Merger, is not complete and is subject to and qualified in its entirety by reference to the full text of the Merger Agreement, which was filed as Exhibit 2.1 to the Company’s Current Report on Form 8-K filed with the SEC on March 17, 2025, which is incorporated herein by reference.
| Item 3.01 | Notice of Delisting or Failure to Satisfy a Continued Listing Rule or Standard; Transfer of Listing |
On April 28, 2025, the Company, acting pursuant to authorization from its board of directors, notified the Nasdaq Stock Market LLC (“Nasdaq”) of its intention to voluntarily withdraw the listing of its common stock, par value $0.01 per share (the “Common Stock”), from the Nasdaq and transfer the listing to the New York Stock Exchange (the “NYSE”).
The Company expects that listing and trading of its Common Stock on the Nasdaq will end at market close on June 6, 2025 and that trading will begin on the NYSE at market open on June 9, 2025. The Common Stock has been approved for listing on the NYSE where it will trade under the symbol “CSW.”
| Item 7.01 | Regulation FD Disclosure. |
Press Release — Listing Transfer
On April 29, 2025 the Company issued a press release in connection with the transfer of the listing of its Common Stock to the NYSE. A copy of this press release is furnished as Exhibit 99.1 to this Current Report on Form 8-K.
Press Release — Merger
On May 1, 2025, the Company issued a press release announcing the closing of the Merger pursuant to the Merger Agreement. A copy of this press release is furnished as Exhibit 99.2 to this Current Report on Form 8-K.
The information furnished in this Item 7.01 and Exhibits 99.1 and 99.2 attached hereto shall not be deemed “filed” for any purpose, including for the purposes of Section 18 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”) or otherwise subject to the liabilities of that section, nor shall it be deemed incorporated by reference into any filing under the Securities Act or the Exchange Act, regardless of any general incorporation language in such filing.
| Item 9.01 | Financial Statements and Exhibits. |
(d) Exhibits
| Exhibit |
Description |
|
| 2.1 | Agreement and Plan of Merger, dated March 17, 2025, by and among RectorSeal, LLC, RS Acquisition Sub, LLC, Aspen Manufacturing, LLC and Michael Kutsch as Holder Representative.(1)* | |
| 99.1 | CSWI Press Release, dated April 29, 2025. | |
| 99.2 | CSWI Press Release, dated May 1, 2025. | |
| 104 | Cover Page Interactive Data File (embedded within the Inline XBRL document). | |
| (1) | Filed as Exhibit 2.1 to the registrant’s Current Report on Form 8-K (File No. 001-37454) filed with the SEC on March 17, 2025, and incorporated herein by reference. |
| * | Schedules and exhibits have been omitted pursuant to Item 601(a)(5) of Regulation S-K. The registrant agrees to furnish supplementally a copy of any omitted schedule or exhibit to the U.S. Securities and Exchange Commission upon request. |
Cautionary Note Regarding Forward-Looking Statements
This Current Report on Form 8-K includes forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934, which are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995, as amended. Words or phrases such as “expects,” “estimates,” or other similar expressions are intended to identify forward-looking statements.
The forward-looking statements included in this Current Report on Form 8-K are based on our current expectations, projections, estimates, and assumptions. These statements are only predictions, not guarantees. Such forward-looking statements are subject to numerous risks and uncertainties that are difficult to predict. These risks and uncertainties may cause actual results to differ materially from what is forecast in such forward-looking statements, and include, without limitation, the risk factors described from time to time in our filings with the Securities and Exchange Commission, including our Annual Report on Form 10-K.
All forward-looking statements included in this Current Report on Form 8-K are based on information currently available to us, and we assume no obligation to update any forward-looking statement except as may be required by law.
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
Dated: May 1, 2025
| By: | /s/ Luke E. Alverson |
|
| Name: | Luke E. Alverson | |
| Title: | Senior Vice President, General Counsel & Secretary | |
Exhibit 99.1
CSW Industrials Announces Transfer of Listing of Common Stock to the New York Stock Exchange and Change in Ticker Symbol
Dallas, Texas – April 29, 2025 – CSW Industrials, Inc. (Nasdaq: CSWI) (the “Company”) today announced that the Company will transfer the listing and trading of its common stock to the New York Stock Exchange (“NYSE”) from the Nasdaq Stock Market LLC (“Nasdaq”).
The Company’s common stock is expected to begin trading on the NYSE on Monday, June 9, 2025, under a new ticker symbol, “CSW”. The Company’s common stock is expected to continue to trade on Nasdaq until the close of the market on Friday, June 6, 2025.
Joseph B. Armes, the Company’s Chairman, Chief Executive Officer, and President, commented, “As we anticipate celebrating our ten-year anniversary as an independent public company later this year, we are pleased to mark this milestone in our company’s history by moving to the NYSE. We look forward to joining the impressive roster of outstanding industrial companies on the world’s largest stock exchange. We believe that this move will provide additional liquidity and enhanced visibility to our stockholders, including our employees who own CSW Industrials stock through our employee stock ownership plan.”
“We are excited to welcome CSW Industrials to the New York Stock Exchange,” said Chris Taylor, NYSE Chief Development Officer. “As a key player in Dallas and across industrial solutions, CSW is a valuable addition to our diverse community of listed companies.”
About CSW Industrials
CSW Industrials is a diversified industrial growth company with industry-leading operations in three segments: Contractor Solutions, Specialized Reliability Solutions, and Engineered Building Solutions. The Company provides niche, value-added products with two essential commonalities: performance and reliability. The primary end markets we serve with our well-known brands include: HVAC/R, plumbing, electrical, general industrial, architecturally-specified building products, energy, mining, and rail transportation. For more information, please visit www.cswindustrials.com.
Forward Looking Statements
This press release includes forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934, which are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995, as amended. Words or phrases such as “may,” “should,” “expects,” “could,” “intends,” “plans,” “anticipates,” “estimates,” “believes,” “forecasts,” “predicts” or other similar expressions are intended to identify forward-looking statements, which include, without limitation, the Company’s expectations or beliefs concerning future events that involve risks and uncertainties, including statements regarding the expected benefits and impact of the transfer from Nasdaq to the NYSE.
The forward-looking statements included in this press release are based on our current expectations, projections, estimates, and assumptions. These statements are only predictions, not guarantees. Such forward-looking statements are subject to numerous risks and uncertainties that are difficult to predict. These risks and uncertainties may cause actual results to differ materially from what is forecast in such forward-looking statements, and include, without limitation, the risk factors described from time to time in our filings with the Securities and Exchange Commission, including our Annual Report on Form 10-K.
All forward-looking statements included in this press release are based on information currently available to us, and we assume no obligation to update any forward-looking statement except as may be required by law.
Investor Relations
Alexa Huerta
Vice President Investor Relations, & Treasurer
214-489-7113
alexa.huerta@cswindustrials.com
Exhibit 99.2
CSW Industrials Completes Previously Announced Accretive, Synergistic Acquisition of
Aspen Manufacturing
Dallas, Texas – May 1, 2025 – CSW Industrials, Inc. (Nasdaq: CSWI) (the “Company” or “CSW”) today announced the Company has completed the previously announced acquisition of Aspen Manufacturing for approximately $313.5 million in cash, utilizing cash on hand and borrowings under the existing $500 million revolving credit facility while maintaining sufficient liquidity and a strong balance sheet. The purchase price is approximately 11x Aspen Manufacturing’s 2024 adjusted earnings before interest, taxes, depreciation, and amortization (EBITDA) of $28.5 million.
This strategic acquisition expands CSW Industrial’s HVAC/R product offering with the incorporation of Aspen Manufacturing’s market leading evaporator coils and air handlers. By leveraging CSW’s deep experience in the HVAC/R market, strong distribution channels, successful go-to-market strategy, and demonstrated track record of industrial manufacturing, this acquisition is expected to drive market and customer share of wallet gains, while providing an enhanced service offering and maximizing channels to market.
Aspen Manufacturing’s current product suite includes a vast range of high-quality residential and light commercial evaporator coils, blowers, and air handling units for single-family, multi-family, and manufactured homes. Based in Humble, TX, all of Aspen’s products are designed, engineered, and assembled in the United States.
Joseph B. Armes, Chairman, President, and Chief Executive Officer of CSW Industrials, commented, “We are pleased to have consummated the Aspen Manufacturing acquisition and to welcome approximately 350 new colleagues to the CSW Industrials family. By adding Aspen Manufacturing, CSW expects to further drive above-market growth through the expansion of our highly profitable and resilient HVAC/R product portfolio thereby enhancing long-term value for all of CSW’s shareholders.”
For additional information about CSW Industrials’ acquisition of Aspen Manufacturing, please visit the previously released transaction documents, including the March 18, 2025 press release and investor presentation, which are both available on the Company’s website at https://cswindustrials.gcs-web.com.
Safe Harbor Statement
This press release includes forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934, which are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995, as amended. Words or phrases such as “may,” “should,” “expects,” “could,” “intends,” “plans,” “anticipates,” “estimates,” “believes,” “forecasts,” “predicts” or other similar expressions are intended to identify forward-looking statements, which include, without limitation, earnings forecasts, effective tax rate, statements relating to our business strategy and statements of expectations, beliefs, future plans and strategies and anticipated developments concerning our industry, business, operations, and financial performance and condition.
The forward-looking statements included in this press release are based on our current expectations, projections, estimates, and assumptions. These statements are only predictions, not guarantees. Such forward-looking statements are subject to numerous risks and uncertainties that are difficult to predict. These risks and uncertainties may cause actual results to differ materially from what is forecast in such forward-looking statements, and include, without limitation, the risk factors described from time to time in our filings with the Securities and Exchange Commission, including our Annual Report on Form 10-K.
This press release contains estimated results of Aspen Manufacturing for the calendar year 2024 (the “estimated results”). The estimated results are forward-looking statements based on Aspen Manufacturing’s management’s preliminary, unaudited results as of the date hereof, and Aspen Manufacturing’s actual results may be materially different from the estimated results. We assume no obligation to update any forward-looking statement as a result of new information, future events or other factors. Accordingly, you should not place undue reliance on the estimated results. Our independent registered public accounting firm has not audited, reviewed or performed any procedures with respect to the estimated results and does not express any opinion or any other form of assurance with respect thereto.
All forward-looking statements included in this press release are based on information currently available to us, and we assume no obligation to update any forward-looking statement except as may be required by law.
About CSW Industrials
CSW Industrials is a diversified industrial growth company with industry-leading operations in three segments: Contractor Solutions, Specialized Reliability Solutions, and Engineered Building Solutions. The Company provides niche, value-added products with two essential commonalities: performance and reliability. The primary end markets we serve with our well-known brands include: HVAC/R, plumbing, electrical, general industrial, architecturally-specified building products, energy, mining, and rail transportation. For more information, please visit www.cswindustrials.com.
Investor Relations
Alexa Huerta
Vice President, Investor Relations, & Treasurer
214-489-7113
alexa.huerta@cswindustrials.com