UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 8-K
CURRENT REPORT
Pursuant to Section 13 or 15(d) of
the Securities Exchange Act of 1934
Date of Report (Date of earliest event reported): March 10, 2025
Mayville Engineering Company, Inc.
(Exact name of registrant as specified in its charter)
Wisconsin |
001-38894 |
39-0944729 |
(State or Other Jurisdiction |
(Commission |
(IRS Employer |
|
|
|
|
135 S. 84th Street, Suite 300 Milwaukee, Wisconsin 53214 |
|
|
(Address of Principal Executive Offices and zip code) |
|
(414) 381-2860
(Registrant’s telephone number, including area code)
Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions:
☐ |
Written communications pursuant to Rule 425 under the Securities Act (17 C.F.R. §230.425) |
☐ |
Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 C.F.R. §240.14a-12) |
☐ |
Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 C.F.R. §240.14d-2(b)) |
☐ |
Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 C.F.R. §240.13e-4(c)) |
Securities registered pursuant to Section 12(b) of the Act:
Title of each class |
|
Trading Symbol |
|
Name of each exchange on which registered |
Common Stock, no par value |
|
MEC |
|
New York Stock Exchange |
Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2 of this chapter).
Emerging growth company ☐
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
Item 5.02 |
Departure of Directors or Certain Officers; Election of Directors; Appointment of Certain Officers; Compensatory Arrangements of Certain Officers. |
On March 10, 2025, Mayville Engineering Company, Inc. (the “Company”) announced the appointment of Craig D. Nichols as the Company’s Senior Vice President Operations and Supply Chain effective March 10, 2025. A copy of the press release announcing the foregoing is filed as Exhibit 99 to this Current Report on Form 8-K and is incorporated by reference herein.
Prior to joining the Company, Mr. Nichols, 50, served as Vice President of Drive System Operations at Dana Incorporated since October 2021, Senior Director of Operations at Dana from September 2019 to September 2021, Senior Director of Off Highway Global Manufacturing Strategy at Dana from August 2018 to August 2019 and Senior Director of Global Aftermarket Distribution Operations at Dana from December 2016 to August 2018. Prior to joining Dana, he served as Senior Vice President of Global Manufacturing at Jason Industries. He started his career in 1993 with Hi-lex Corporation, where he was responsible for design, procurement and installation of secondary equipment, tooling and assembly lines, and then led multiple operations at Lear Corporation. Mr. Nichols earned a Bachelors Degree in Business Management from Davenport University.
Mr. Nichols’ initial base salary is $415,000 per year; he is eligible to earn an annual bonus based on performance, with his target bonus for 2025 being 60% of his base salary (which will be prorated to reflect his partial year of service); he is eligible to participate in the Company’s long-term incentive plan, with an annual target grant date fair value of $500,000; he is eligible to participate in the Company’s deferred compensation plan; and he is eligible to participate in the Company’s normal benefits package.
Mr. Nichols also will receive a sign-on bonus in the amount of $150,000, subject to repayment in part or in whole, depending on the duration of his employment, if Mr. Nichols’ employment is terminated voluntarily by him or by the Company for performance or misconduct prior to March 10, 2027.
In connection with his appointment as the Company’s Senior Vice President Operations and Supply Chain, the Company and Mr. Nichols entered into a severance agreement (a “Severance Agreement”) and a Change in Control Employment and Severance Agreement (the “Change in Control Agreement”). The Severance Agreement provides for a lump sum severance benefit equal to Mr. Nichols’ then-current annual base salary and target annual cash bonus in the event that his employment is involuntarily terminated without cause or he terminates for good reason prior to a change in control of the Company. As a condition of receiving such severance, Mr. Nichols is required to execute a release and waiver of claims.
The Change in Control Agreement provides for certain protections relating to Mr. Nichols’ employment during a two-year period following a change in control of the Company. If, during the protected period, Mr. Nichols’ employment is terminated by the Company without cause, other than by reason of death or disability, or Mr. Nichols terminates his employment with good reason, then, if Mr. Nichols provides a release of claims, he will be entitled to a severance payment of two times the sum of his annual base salary and target annual bonus. The Change in Control Agreement also provides that Mr. Nichols would be entitled to continued life insurance, hospitalization, medical and dental coverage for 24 months following the termination of employment. Any equity-based and cash incentive awards granted after the change in control will be deemed immediately earned or vested in full as of the termination of employment.
Prior to a change in control, the Change in Control Agreement does not restrict the Company’s right to terminate Mr. Nichols’ employment for any reason. However, if Mr. Nichols’ employment is terminated by the Company without cause within 180 days prior to a change in control and he reasonably demonstrates that the termination was at the request of the acquirer or otherwise arose in connection with or in anticipation of the change in control, he will be entitled to the protections under the Change in Control Agreement described above.
The Change in Control Agreement imposes restrictive covenants on Mr. Nichols, including non-solicitation of Company customers, non-competition with the Company and non-interference with Company employees during his employment and for 12 months after employment ends. The Change in Control Agreement also obligates Mr. Nichols to protect the Company’s confidential information.
The Change in Control Agreement does not provide for any tax gross-ups. To the extent payments in connection with the change in control would trigger the parachute payment excise tax under Section 4999 of the Internal Revenue Code of 1986, as amended, then Mr. Nichols will either receive the total payments and pay the excise tax or have the total payments reduced such that no excise tax will be imposed, whichever is better for him on an after-tax basis.
The foregoing descriptions of the Severance Agreement and the Change in Control Agreement do not purport to be complete and are qualified in their entirety by reference to the full texts of the forms of these agreements, which are filed herewith as Exhibits 10.1 and 10.2 and are incorporated by reference herein.
Item 9.01.Financial Statements and Exhibits.
| (a) | Not applicable. |
| (b) | Not applicable. |
| (c) | Not applicable. |
(d)Exhibits. The exhibit listed in the exhibit index below is being filed herewith.
EXHIBIT INDEX
Exhibit Number |
|
10.1 |
Form of Severance Agreement between Mayville Engineering Company, Inc. and Craig D. Nichols. |
10.2 |
|
99 |
Press Release of Mayville Engineering Company, Inc., dated March 10, 2025. |
104 |
Cover Page Interactive Data File (embedded within the Inline XBRL document). |
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
|
MAYVILLE ENGINEERING COMPANY, INC. |
|
|
|
|
Date: March 10, 2025 |
By: |
/s/ Sean P. Leuba |
|
|
Sean P. Leuba |
|
|
Senior Vice President - Corporate Development and General Counsel |
Exhibit 10.1
SEVERANCE AGREEMENT
THIS SEVERANCE AGREEMENT, effective as of the __ day of March, 2025 (this “Agreement”), is by and between MAYVILLE ENGINEERING COMPANY, INC. a Wisconsin corporation (the “Company”), and Craig Nichols (the “Executive”).
WITNESSETH:
WHEREAS, the Executive has agreed to serve as the Company’s Senior Vice President Operations and Supply Chain.
WHEREAS, the Company is, as of the date hereof, entering into a Change in Control Employment and Severance Agreement with the Executive (the “CIC Agreement”), which provides for severance benefits upon certain terminations of employment in connection with a change in control of the Company.
WHEREAS, the Company desires to provide Executive certain assurances regarding severance pay in the event of termination of employment under certain circumstances in which the CIC Agreement would not apply as described in this Agreement.
NOW, THEREFORE, in consideration of the premises and the mutual covenants and agreements set forth herein, the parties hereto, intending to be legally bound, hereby agree as follows:
-2-
-3-
IN WITNESS WHEREOF, the parties have caused this Agreement to be duly executed as of the day and year first above written.
MAYVILLE ENGINEERING COMPANY, INC.
By: |
|
|
|
Name: |
|
|
Title: |
|
|
|
|
Attest: |
|
|
|
Name: |
|
|
Title: |
|
|
|
|
EXECUTIVE |
|
|
-4-
EXHIBIT A
RELEASE
AGREED TO AND ACCEPTED BY:
EXECUTIVE
_________________________________Date: ______________
-6-
Exhibit 10.2
CHANGE IN CONTROL EMPLOYMENT AND SEVERANCE AGREEMENT
THIS CHANGE IN CONTROL EMPLOYMENT AND SEVERANCE AGREEMENT, effective as of the __ day of March, 2025 (this “Agreement”), is by and between MAYVILLE ENGINEERING COMPANY, INC., a Wisconsin corporation (the “Company”), and Craig Nichols (the “Executive”).
W I T N E S S E T H
WHEREAS, the Executive has agreed to serve as the Company’s Senior Vice President Operations and Supply Chain and the Executive’s services are valuable to the conduct of the business of the Company and its subsidiaries (collectively, the “Employer”).
WHEREAS, the Company desires to continue to attract and retain dedicated and skilled management employees in a period of industry change, consistent with achieving the best possible value for its shareholders in any change in control of the Company.
WHEREAS, the Company recognizes that circumstances may arise in which a change in control of the Company occurs, through acquisition or otherwise, thereby causing a potential conflict of interest between the Company’s needs for the Executive to remain focused on the Company’s business and for the necessary continuity in management prior to and following a change in control, and the Executive’s reasonable personal concerns regarding future employment with the Employer and economic protection in the event of loss of employment as a consequence of a change in control.
WHEREAS, the Company and the Executive are desirous that any proposal for a change in control or acquisition of the Company will be considered by the Executive objectively and with reference only to the best interests of the Company and its shareholders.
WHEREAS, the Executive will be in a better position to consider the Company’s best interests if the Executive is afforded reasonable economic security, as provided in this Agreement, against altered conditions of employment which could result from any such change in control or acquisition.
WHEREAS, the Executive possesses intimate knowledge of the business and affairs of the Company and has acquired certain confidential information and data with respect to the Company.
WHEREAS, the Company desires to insure, insofar as possible, that it will continue to have the benefit of the Executive’s services and to protect its confidential information and goodwill.
WHEREAS, the Company and the Executive are entering into a Severance Agreement effective as of the date hereof (the “Pre-CIC Severance Agreement”), which provides for severance benefits upon certain terminations of employment but does not contemplate any enhanced benefits in connection with a change in control of the Company.
NOW, THEREFORE, in consideration of the foregoing and of the mutual covenants and agreements hereinafter set forth, the parties hereto mutually covenant and agree as follows:
2
3
4
5
6
7
Capitalized terms used in this Agreement not defined in this Section 1 have the meanings assigned in the other sections of this Agreement. The definitions of the following terms may be found in the sections indicated:
Term |
Section |
|
|
Annual Base Salary |
Section 5(a) |
Base Period Income |
Section 9(b)(iii) |
Bonus Amount |
Section 5(e)(i) |
Bonus Plan |
Section 5(e) |
Company Incentive Plan |
Section 5(e)(iii) |
DTSA |
Section 14(f) |
Excise Tax |
Section 9(b)(i) |
Expenses |
Section 15 |
Goals |
Section 5(e)(iii) |
National Tax Counsel |
Section 9(b)(ii) |
Notice of Termination |
Section 13 |
Plans |
Section 9(c)(iv) |
Restricted Employee |
Section 14(c) |
Termination Payment |
Section 9(a) |
Total Payments |
Section 9(b)(i) |
8
9
10
11
12
13
14
15
16
17
18
19
20
21
IN WITNESS WHEREOF, the parties have executed this Agreement as of the day and year first above written.
MAYVILLE ENGINEERING COMPANY, INC.
By: |
|
|
Name: |
|
|
|
|
|
Its: |
|
|
EXECUTIVE:
Name: |
|
||
Address: |
|||
22
EXHIBIT A
RELEASE
AGREED TO AND ACCEPTED BY:
EXECUTIVE:
_________________________________Date: ______________
24
Exhibit 99

MAYVILLE ENGINEERING COMPANY
ANNOUNCES APPOINTMENT OF CRAIG NICHOLS AS SENIOR VICE PRESIDENT, OPERATIONS AND SUPPLY CHAIN
MILWAUKEE, Wis., March 10, 2025 -- Mayville Engineering Company (NYSE: MEC) (the “Company” or “MEC”), a leading value-added provider of design, prototyping and manufacturing solutions serving diverse end-markets, today announced the appointment of Craig Nichols as Senior Vice President Operations and Supply Chain effective March 10, 2025, reporting directly to President and Chief Executive Officer, Jag Reddy.
Mr. Nichols brings to MEC more than three decades of operations, supply chain management, and manufacturing expertise. Throughout his career, Mr. Nichols has successfully led the implementation of continuous improvement initiatives across multi-site global manufacturing organizations.
“I am excited to welcome Craig to the executive leadership team at MEC,” said Jag Reddy, President and CEO. “His extensive experience in leading operations excellence and implementing continuous improvement initiatives across global manufacturing organizations will be an invaluable asset to MEC. This aligns well with the strategic focus outlined in our MBX value-creation framework. We look forward to utilizing his expertise to optimize our business for long-term, profitable growth.”
“I am honored to join MEC as we enter this next chapter of a multi-year business transformation journey,” stated Craig Nichols, incoming Senior Vice President, Operations and Supply Chain. “The MBX framework represents a comprehensive structure for operational excellence, one that I am looking forward to building upon in the years ahead as we continue to scale the business, while further optimizing our systems, processes and domestic manufacturing base.”
ABOUT CRAIG NICHOLS
Over the last three decades, Mr. Nichols has served in a variety of leadership roles in leading global manufacturing organizations, where he has global operations and advanced manufacturing. Most recently, Mr. Nichols served as the Vice President of Drive System Operations at Dana Incorporated, a global leader in design and manufacturing of energy-efficient propulsion systems for vehicles and machinery. Previously, Mr. Nichols served in multiple leadership roles at Dana Incorporated, including Senior Director, Off Highway Global Manufacturing Strategy and Senior Director, Global Aftermarket Distribution Operations. Prior to that, he served as Senior Vice President of Global Manufacturing at Jason Industries. He started his career with Hi-Lex Corporation, where he was responsible for design, procurement and installation of secondary equipment across multiple assembly lines and then led multiple operations at Lear Corporation. Mr. Nichols has a Bachelors Degree in Business Management from Davenport University.
FORWARD-LOOKING STATEMENTS
This press release includes forward-looking statements that reflect plans, estimates and beliefs. Such statements involve risk and uncertainties. Actual results may differ materially from those contemplated by these forward-looking statements as a result of various factors. Important factors that could cause actual results or events to differ materially from those expressed in forward-looking statements include, among others, the risk factors described in our reports filed or expected to be filed with the Securities and Exchange Commission.
Any forward-looking statement or statement of belief speaks only as of the date of this press release. We undertake no obligation to update or revise any forward-looking statements after the date on which any such statement is made, whether as a result of new information, future events or otherwise, except as required by federal securities laws.
ABOUT MAYVILLE ENGINEERING COMPANY
Founded in 1945, MEC is a leading U.S. based, vertically integrated, value-added manufacturing partner providing a full suite of manufacturing solutions from concept to production, including design, prototyping and tooling, fabrication, aluminum extrusion, coating, assembly and aftermarket components. Our customers operate in diverse end markets, including heavy- and medium-duty commercial vehicles, construction & access equipment, powersports, agriculture, military, and other end markets. Along with process engineering and development services, MEC maintains an extensive manufacturing infrastructure with 23 facilities, of which 22 are in use, across seven states. These facilities make it possible to offer conventional and CNC (computer numerical control) stamping, shearing, fiber laser cutting, forming, drilling, tapping, grinding, tube bending, machining, welding, assembly, and logistic services. MEC also possesses a broad range of finishing capabilities including shot blasting, e-coating, powder coating, wet spray and military grade chemical agent resistant coating (CARC) painting. For more information, please visit www.mecinc.com.
IR CONTACT 
Noel Ryan or Stefan Neely
(615) 844-6248
MEC@val-adv.com