f

​

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

​

(Mark One)

​

​

For the fiscal year ended December 31, 2024

​

OR

​

​

Commission file number 0-16244

VEECO INSTRUMENTS INC.

(Exact Name of Registrant as Specified in Its Charter)

​

​

​

Registrant’s telephone number, including area code:

(516) 677-0200

​

Securities registered pursuant to Section 12(b) of the Act:

​

​

Securities registered pursuant to Section 12(g) of the Act: None

​

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☒ No ☐

​

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

​

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

​

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

​

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

​

​

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

​

​

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Act). ☐ Yes ☒ No

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.  ☒

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

​

The aggregate market value of the common stock held by non-affiliates of the registrant at June 28, 2024 (the last business day of the registrant’s most recently completed second quarter) was $2,588,029,739 based on the closing price of $46.71 on the NASDAQ Global Select Market on that date.

​

As of February 7, 2025, there were 57,935,847 shares of the registrant’s common stock, par value $0.01 per share, outstanding.

​

DOCUMENTS INCORPORATED BY REFERENCE

​

Certain portions of the definitive Proxy Statement to be used in connection with the Registrant’s 2025 Annual Meeting of Stockholders are incorporated by reference into Part III of this Form 10-K.

​

​

​

VEECO INSTRUMENTS INC.

​

INDEX

​

​

​

This Annual Report on Form 10-K (“Form 10-K”) contains certain forward-looking statements within the meaning of the safe harbor provisions of the U.S. Private Securities Litigation Reform Act of 1995, as amended, relating to Veeco Instruments Inc. (together with its consolidated subsidiaries, “Veeco,” the “Company,” “Registrant,” “we,” “our,” or “us,” unless the context indicates otherwise) that are based on management’s expectations, estimates, projections, and assumptions. When used in this Form 10-K, words such as “expects,” “anticipates,” “plans,” “believes,” “scheduled,” “estimates,” and variations of these words and similar expressions are intended to identify forward-looking statements. Discussions containing such forward-looking statements may be found in Part I, Items 1 and 3, Part II, Items 7 and 7A hereof, as well as within this Form 10-K generally. Forward-looking statements in this discussion include, but are not limited to, those regarding anticipated growth and trends in our businesses and markets, industry outlooks and demand drivers, our investment and growth strategies, our development of new products and technologies, our business outlook for the current and future periods, and other statements that are not historical facts. These statements and their underlying assumptions are subject to risks and uncertainties and are not guarantees of future performance. Factors that could cause actual results to differ materially from those expressed or implied by such statements include, without limitation:

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

All forward-looking statements speak only to management’s expectations, estimates, projections and assumptions as of the date of this filing or, in the case of any document referenced herein or incorporated by reference, the date of that document. The Company does not undertake any obligation to update or publicly revise any forward-looking statements to reflect events, circumstances or changes in expectations after the date of this filing.

​

PART I

Item 1. Business

​

Business Description and Overview

​

Headquartered in Plainview, New York, we were organized as a Delaware corporation in 1989. We are a manufacturer of advanced semiconductor process equipment that solves an array of challenging materials engineering problems for our customers. Our comprehensive collection of ion beam, laser annealing, metal organic chemical vapor deposition (“MOCVD”), chemical vapor deposition (“CVD”), advanced packaging lithography, single wafer wet processing, molecular beam epitaxy (“MBE”), and atomic layer deposition (“ALD”) technologies play an integral role in the fabrication of key devices that are enabling the 4th industrial revolution of all things connected. Such devices include leading advanced node application processors for AI chips, high-performance computing, mobile devices, high-speed data communications, and radio frequency (“RF”) filters and power amplifiers for fifth generation (“5G”) networks and mobile electronics, photonics devices for 3D sensing, advanced displays, and thin film magnetic heads for hard disk drives in data storage. In close partnership with our customers, we combine decades of applications and materials know-how with leading-edge systems engineering to deliver high-volume manufacturing solutions with competitive cost of ownership. Serving a global and highly interconnected customer base, we have comprehensive sales and service operations across the Asia-Pacific, Europe, and North America regions to ensure real-time close collaboration and responsiveness.

​

Markets

​

Our products are purchased by customers in the following four end-markets: 1) Semiconductor; 2) Compound Semiconductor; 3) Data Storage; and 4) Scientific & Other.

​

Our systems are used in the production of a broad range of microelectronic components, including logic, dynamic random-access memory (“DRAM”), photonics devices (including laser diodes and micro-LEDs), power electronics, RF filters and amplifiers, magnetic heads for hard disk drives, and other semiconductor devices. Many of our systems are used to deposit advanced materials critical to the operation of the device and some of our systems are used in cleaning and surface preparation as well as the precise removal of critical materials. We are also a leader in systems used in the advanced packaging process flow of microelectronic components such as flip chip, fan-out wafer level packaging (“FOWLP”), and other wafer level packaging approaches used in the modern integration of diverse semiconductor products, especially in consumer electronics. In general, our customers purchase our systems to both produce current-generation devices in volume and to develop next-generation products which deliver more efficient, cost-effective, and advanced technological solutions. We operate in several highly cyclical business environments, and our customers’ buying patterns are dependent upon industry trends and buying patterns for consumer electronics. As our products are sold into multiple markets, the following table describes these markets and the applicable Veeco technologies.

​

​

​

System Products

​

Laser Annealing Systems

​

Our laser annealing systems meet the industry demand for ultra-short time-scale “millisecond” annealing, heating the wafer up to temperatures just below the silicon melting point, enabling thermal annealing solutions at the most advanced semiconductor process nodes. This unique annealing technology provides a solution to the difficult challenge of fabricating ultra-shallow junctions and highly activated source/drain contacts at advanced logic nodes. In addition, our proprietary hardware design enables outstanding temperature uniformity across the wafer and die, by minimizing the pattern-density effect, thus reducing absorption variations.

​

Our next generation nanosecond annealing technology targets annealing advanced logic devices and memory devices at advanced nodes. As devices scale, achieving performance targets has become a challenge. To continue the roadmap, the industry is looking at new materials and the use of thermal processes that require nanosecond time-scale thermal annealing with temperatures exceeding the melting point. We believe that our nanosecond annealing will be required to meet the device targets at future nodes and complements our millisecond annealing solutions.

​

Ion Beam Deposition and Etch Systems

​

Our NEXUS® Ion Beam systems and IBD300 systems are used to deposit and etch thin film layers for multiple end applications in the Semiconductor, Data Storage, RF and other various emerging markets. Our NEXUS® IBD system has a leading position in multiple markets including EUV mask blank manufacturing in which it enables our customers to deposit multilayers with high precision and ultra-low defects which is essential for EUV lithography. Our IBD300 system is being evaluated for 300mm front end semiconductor applications where low resistivity metals like tungsten, ruthenium and molybdenum are critical. The IBD systems are also critical in the manufacture of hard disk drive magnetic heads where they are used to deposit various magnetic and oxide layers and deliver best-in-class film properties. Our NEXUS® IBE systems are used to precisely etch complex features on materials which are challenging to pattern by traditional reactive ion etching techniques. These systems are widely used in the data storage industry for patterning of magnetic and oxide materials and are essential for forming the precise shape of the magnetic head. The NEXUS® systems may be included on our cluster system platform to allow either parallel or sequential deposition/etch processes.

​

Our SPECTOR® Ion Beam Sputtering system was developed for high precision optical coatings and offers manufacturers state of the art optical thickness monitoring, improved productivity, and target material utilization, for cutting-edge optical interference coating applications. We also provide a broad array of ion beam sources.

Advanced Packaging Lithography

​

Our lithography equipment is used in the Advanced Packaging market for applications such as FOWLP, Flip Chip (including Copper Pillar), Fan In Wafer Lever Packaging, 3D stacking, interposers and embedded die. The Advanced Packaging market is driven by the need for improved performance, reduced power consumption, and the ability to image smaller geometries for mobile and automotive applications. These applications continue to demand increasingly complex packaging techniques and heterogeneous device integration from integrated device manufacturers (“IDMs,”), Foundries, and outsourced semiconductor assembly and test (“OSAT”) companies. Our Advanced Packaging tools are designed to optimize productivity for leading-edge 300mm Advanced Packaging applications by delivering proven reliability and low cost of ownership in high-volume manufacturing environments. Our products are known for best-in-class yield coupled with outstanding resolution and depth of focus.

​

Single Wafer Wet Processing

​

We offer single wafer wet processing, and surface preparation systems which target growth opportunities in advanced packaging applications in the Semiconductor market as well as RF filters and amplifiers in the Compound Semiconductor market. The WaferStorm® platform is based on our unique ImmJET™ technology, which provides improved performance at a lower cost of ownership than conventional wet bench-only or spray-only approaches. This highly flexible platform targets solvent-based cleaning applications that require a significant level of process control and flexibility. The WaferEtch® platform provides highly uniform, selective etching with onboard end-point detection for improved process control and yield in bumping applications. In addition, we have developed a state-of-the-art solution with the WaferEtch® platform to address the requirements of wafer thinning.

​

Metal Organic Chemical Vapor Deposition Systems and Chemical Vapor Deposition Systems

​

MOCVD production systems are used to make GaN and As/P-based devices for applications including power electronics, RF devices, specialty LED, display, and many other photonics applications. Our proven TurboDisc® technology is at the heart of our MOCVD systems and is the key to enabling best-in-class deposition uniformity, yield performance and cost per wafer savings for our customers with a combined advantage of high operating uptime and low maintenance costs. Our Lumina® platform is used for As/P deposition, and features long campaigns and low defectivity for exceptional yield and flexibility. Our Propel® series enables the development of highly-efficient GaN-based power electronics, RF devices and advanced GaN-on-silicon micro-LEDs. The Propel® system offers 200mm and fully-automated 300mm technology and incorporates single-wafer reactor technology for outstanding film uniformity, yield, and device performance. Our SiC CVD system has a single wafer reactor concept based on a time-tested industry validated architecture and is used for research and development for SiC power electronics applications.

​

Molecular Beam Epitaxy Systems

​

MBE is the process of precisely depositing atomically-thin epitaxial crystalline layers, or epilayers, of elemental materials onto a substrate in an ultra-high vacuum environment. We are a leading supplier of MBE systems worldwide.

​

Our MBE systems, sources, and components are used to develop and manufacture compound semiconductor devices in a wide variety of applications such as quantum computing, high-power fiber lasers, infrared detectors, mobile phones, radar systems, high efficiency solar cells, and advanced materials science research in academic, governmental, and industrial organizations. The GENxplor® MBE system creates high quality epitaxial layers and is ideal for cutting-edge research on a wide variety of materials including III-V GaAs, nitride, and oxide materials on substrates up to 3” diameter.

​

Atomic Layer Deposition Systems

​

ALD is a thin-film deposition method in which a film is deposited on a substrate uniformly with precise control down to the atomic scale. Veeco offers a full suite of ALD systems for non-semiconductor front-end production applications across a wide range of markets and applications such as Quantum Computing, optical, electronics, micro-electro mechanical systems (“MEMS”), nanostructures, and biomedical.

​

Other Systems

​

We have other deposition systems including Physical Vapor Deposition, Diamond-Like Carbon Deposition, and Chemical Vapor Deposition Systems primarily sold to the data storage market. In addition, we have mechanical systems such as saws and lappers for the data storage industry as well as the power semiconductor market. Finally, we have Gas-mixing systems primarily sold to the semiconductor market. We also continue to focus on penetrating adjacent markets with organically developed and acquired technology.

​

Sales and Service

​

We sell our products and services worldwide through various strategically located facilities in the United States, Europe, and the Asia-Pacific region. We believe that our customer service organization is a significant factor in our success. We provide service and support through warranty and service contracts, as well as on an individual service-call basis. We believe that offering timely support creates stronger relationships with our customers. Revenue from the sales of parts, upgrades, service, and support represented approximately 20%, 22%, and 24% of our net sales for the years ended December 31, 2024, 2023, and 2022, respectively. Parts and upgrade sales represented approximately 15%, 17%, and 18% of our net sales for those years, respectively, and service and support sales were 5%, 5%, and 6% respectively.

​

Customers

​

We sell our products to many of the world’s semiconductor IDMs and Foundries, OSAT, HDD, and photonics manufacturers, as well as research centers and universities. We rely on certain principal customers for a significant portion of our sales. If these principal customers discontinue their relationships with us or suffer economic difficulties, our business prospects, financial condition, and operating results could be materially and adversely affected.

​

Research and Development

​

Our research and development functions are focused on the timely creation of new products and enhancements to existing products, both of which are necessary to maintain our competitive position. We collaborate with our customers to align our technology and product roadmaps to customer requirements. Our research and development activities take place at our facilities in San Jose, California; Plainview, New York; Horsham, Pennsylvania; Somerset, New Jersey; St. Paul, Minnesota; Waltham, Massachusetts; and Solvegatan, Sweden.

​

Suppliers

​

We outsource certain functions to third parties, including the manufacture of several of our systems. While we rely on our outsourcing partners to perform their contracted functions, we maintain some level of internal manufacturing capability for these systems. Refer to Item 1A, “Risk Factors,” for a description of risks associated with our reliance on suppliers and outsourcing partners.

​

Backlog

​

Our backlog consists of orders for which we received a firm purchase order, a customer-confirmed shipment date generally within twelve months, and a deposit, when required. Our backlog was $409.6 million and $490.7 million at December 31, 2024 and 2023, respectively.

​

Competition

​

In each of the markets that we serve, we face competition from established competitors, some of which have greater financial, engineering, and marketing resources than we do, as well as from smaller competitors. In addition, many of our products face competition from alternative technologies, some of which are more established than those used in our products. Significant factors for customer selection of our tools include system performance, accuracy, repeatability, ease of use, reliability, cost of ownership, and technical service and support.

None of our competitors compete with us across all of our product lines.

​

Our principal competitors include: Aixtron; Applied Materials; Canon; Grand Plastics Technology; Mattson Technology; Screen Semiconductor Solutions; Shanghai Micro Electronics Equipment; and Suss MicroTec.

​

Intellectual Property

​

Our success depends, in part, on our proprietary technology, and we have approximately 350 patents in the United States and other countries.

​

We have patents and exclusive and non-exclusive licenses to patents owned by others covering certain of our products, which we believe provide us with a competitive advantage. We have a policy of seeking patents on inventions concerning new products and improvements as part of our ongoing research, development, and manufacturing activities. We believe that there is no single patent or exclusive or non-exclusive license to patents owned by others that is critical to our operations, as the success of our business depends primarily on the technical expertise, innovation, customer satisfaction, and experience of our employees. Refer to Item 1A, “Risk Factors,” for a description of risks associated with intellectual property.

​

People

​

Veeco’s global workforce spans thirteen countries around the world. At the end of 2024, we had 1,231 employees with 290 located in the Asia-Pacific region, 60 in the EMEA region, and 881 in the United States. Approximately 25% of our employees are involved in research and development; 56% in operations, manufacturing, service, and quality assurance; and 19% in sales, order administration, marketing, finance, information technology, general management, and other administrative functions. Our success depends on our ability to attract, retain, and motivate employees. We compete for talent with other companies and organizations. We consider our relations with the Veeco United Team to be favorable. We are subject to various federal, state, and local regulations, and regularly monitor all key employment activities, such as hiring, termination, pay and working practices, to ensure compliance with such regulations. In addition, we may supplement the Veeco United Team with contractors and other temporary workers.

​

Our Core Values

​

All Veeco employees are expected to honor our Core Values, which define the way we conduct our business in everyday actions and choices and form the foundation of our culture:

​

​

Employment, Recruitment and Development

​

Our recruitment programs are regionally focused. Hiring is done at a local level to ensure compliance with applicable regulations. We advertise job openings and source candidates broadly to attract a diverse candidate pool. As a leader in our industry, we can attract a strong candidate pool and have successfully filled vacancies. In fiscal 2024, we hired 134 employees, 102 within the United States, 28 in the Asia-Pacific region, and 4 in the EMEA region.

​

We track and report key talent metrics, including workforce demographics, talent pipeline and diversity. We invest in professional development programs to provide opportunities for individuals to advance their careers in either technical/individual contributor or leadership tracks. We expect all Veeco employees to complete a minimum of 20 hours of training per year to support their personal growth. We offer training and development programs both virtually and in person to benefit employees worldwide. We emphasize the development of future leaders and utilize a talent review process to assess high-potential and high-performing employees for future leadership roles as part of our succession management process. We monitor turnover statistics carefully since turnover is an essential indicator of employee satisfaction. Our 12-month rolling average for voluntary turnover on December 31, 2024 was approximately 7.4%. Our employee average tenure is more than eight years.

​

Employee Engagement

​

The engagement and satisfaction of the Veeco United Team are critical to our culture and our success. We remain committed to working with employees to strengthen the Company’s culture. We regularly conduct formal employee surveys to assess global employee engagement, leadership, work environment and culture. The results of our surveys are used to identify various initiatives designed to strengthen our Company. Our executives conduct regular meetings with our global workforce, providing employees with opportunities to engage with senior leaders and ask questions in open Q&A sessions. Finally, we maintain and regularly remind our employees about our confidential third-party hotline service that can be utilized to share their concerns.

​

Compensation Philosophy

​

Our compensation philosophy is targeted to support our employees’ financial, physical, and mental health and well-being. We utilize independent surveys to ensure that our total compensation packages are competitive. We help employees share in the Company’s success through various programs, including profit sharing and bonus plans, equity awards, and an Employee Stock Purchase Plan (“ESPP”). In addition to providing our employees with competitive compensation packages, we offer benefits designed to meet the needs of employees and their families, including paid time off, medical, dental and vision coverage, disability income protection, life insurance, retirement savings contributions, and more. Veeco pays the majority or all of the costs for many of these benefits.

​

Culture of Inclusion

​

We are committed to building and sustaining a culture of inclusion where our people can be their authentic selves and are encouraged to reach their full potential. Our Veeco team, like the technologies we enable, is a rich combination of diverse individuals coming together as Veeco United to make a material difference for our people, our customers, and the world. As a global technology company, we recognize that a diverse employee population makes Veeco stronger, more innovative, and a more engaging place to work. We are always striving to attract talented individuals from a global candidate pool.

​

Available Information

​

Our corporate website address is www.veeco.com. All filings we make with the Securities and Exchange Commission (“SEC”), including our Annual Report on Form 10-K, our Quarterly Reports on Form 10-Q, our Current Reports on Form 8-K, our proxy statements and any amendments thereto filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, are available for free in the Investor Relations section of our website as soon as reasonably practicable after they are filed with or furnished to the SEC. The reference to our website address does not constitute inclusion or incorporation by reference of the information contained on our website in this Form 10-K or other filings with the SEC, and the information contained on our website is not part of this document.

​

​

Item 1A. Risk Factors

​

Key Risk Factors That May Impact Future Results

​

Stockholders should carefully consider the risk factors described below when evaluating the Company. Any of these factors, many of which are beyond our control, could materially and adversely affect our business, financial condition, operating results, cash flow, and stock price.

​

Risks Related to Our Business and Industry

​

Unfavorable market conditions have adversely affected, and may continue to adversely affect, our operating results.

​

Conditions of the markets in which we operate are volatile and may experience significant deterioration. Changing market conditions require that we continuously monitor and reassess our strategic resource allocation decisions. If we fail to properly adapt to changing business environments, we may lack the infrastructure and resources necessary to scale up our businesses to successfully compete during periods of growth, or we may incur excess fixed costs during periods of decreasing demand. Adverse market conditions relative to our products may result in:

​

​

If the markets in which we participate experience deteriorations or downturns, this could negatively impact our sales and revenue generation, margins, operating expenses, and profitability.

​

We are exposed to risks of operating a global business.

​

A majority of our sales are to customers, and significant elements of our supply chain are from suppliers, who are located outside of the United States, which we expect will continue. Our percentage revenue from the sale of products and the provision of services to non-U.S. customers was 77% for fiscal year 2024. Our non-U.S. sales and operations are subject to risks inherent in conducting business outside the United States, many of which are beyond our control including:

​

​

To date, our operations have not been materially adversely affected by global conflicts including Russia’s invasion of Ukraine or the conflict in the Middle East. However, further escalation of these or other conflicts could result in, among other negative consequences, a disruption to the global economy and supply chain leading to a shortage of parts, materials and services needed to manufacture and timely deliver our products (and we note that the Ukraine-Russia geographic region is a significance source of critical raw materials, including neon and palladium, used for semiconductor manufacturing). Any such shortages could negatively impact our suppliers’ ability to meet our demand requirements and, in turn, our ability to satisfy our customer demand. Parts shortages have required, and may in the future require, that we plan ahead further than usual, and increase our purchase commitments to secure critical components in a timely manner. These challenges, together with other challenges associated with operating a global business, may adversely affect our ability to recognize revenue, our gross margins on the revenue we do recognize, and our other operating results.

​

Changes in U.S. trade policy and export controls and ongoing trade disputes between the U.S. and China have adversely affected, and may continue to adversely affect, our business, results of operations, and financial condition.

​

The U.S. government has implemented, and may continue to implement, changes in trade policy which have adversely affected and could continue to adversely affect the Company’s ability to sell and service its products to and for customers located in China and in certain other countries.

​

Over the past several years, the U.S. Commerce Department, Bureau of Industry and Security (“BIS”) has announced new rules aimed in part at restricting China’s ability to obtain advanced computing chips and manufacture advanced semiconductors. Other changes in trade policy by BIS have included, without limitation, the elimination of license exception for Civil End Users (“CIV”), the implementation of new regulations governing the sale of equipment to defined “Military End Users” and for defined “Military End Uses”, the addition of several companies to the U.S. Commerce Department’s Unverified List and Entity List (including Swaysure Technology Co., Ltd. and Semiconductor Manufacturing International Corporation and certain related entities), and the expansion of the “foreign direct product rule” to restrict the sale of certain products if Huawei Technologies Co., Ltd. or its affiliates are parties to a transaction involving the products.

​

The effect of these changes, among others, is that U.S. companies are now required to obtain export licenses – now at times with a presumption of denial -- before providing commodities, software, and technology (which are subject to the regulations) to customers for whom licensing requirements did not previously apply. These changes have had, and will likely continue to have, a negative effect on our ability to sell and service certain equipment in China. The heightened export restrictions may also result in shipping delays, as the new regulations are interpreted and applied, and may inhibit technical discussions with existing or prospective customers, negatively impacting our ability to pursue sales opportunities. The administrative processing, attendant delays and risk of ultimately not obtaining required export approvals pose a particular disadvantage to the Company relative to certain of our non-U.S. competitors and increase our exposure to foreign and Chinese domestic competition. This difficulty and uncertainty has adversely affected our ability to compete for and win business from customers in China. Foreign customers affected by U.S. government sanctions or threats of sanctions may respond by developing their own solutions to replace our products or by utilizing our foreign competitors’ products.

These heightening restrictions, together with the prospect of additional governmental action (which may include, for example, significant increases in tariffs on a broad array of goods), has adversely affected, and is likely to continue to adversely affect, demand for our products and the results of our operations.

​

The changes in U.S. trade policy and export controls, as well as sanctions imposed by the U.S. against certain Chinese companies, have triggered retaliatory action by China (including China’s recent ban on exports to the United States of critical minerals gallium, germanium and antimony) and could trigger further retaliation (including the possible escalation of geopolitical tensions between China and Taiwan). In addition, China has provided, and is expected to continue to provide, significant assistance, financial and otherwise, to its domestic industries, including some of our competitors. We face increasing competition as a result of significant investment in the semiconductor industry by the Chinese government and various state-owned and affiliated entities that is intended to advance China’s stated national policy objectives (including a heightened focus on the production of legacy node and mature chips in response to U.S. and foreign government regulation impeding the production of advanced node chips). In addition, the Chinese government may restrict us from participating in the China market or may prevent us from competing effectively with Chinese companies.

​

Further, trade-related government actions – including for example the addition, past and future, of China-based companies to the U.S. Commerce Department’s Entity List – have prevented and will likely prevent us from fulfilling certain product delivery, installation, warranty, and/or service commitments to affected customers. This may require us to issue refunds for customer prepayments and may lead to disputes, claims for damages, litigation and possible liabilities for the Company. In addition, we hold inventory of products that may be affected by trade-related government actions, or by potential order cancellations. While we take steps to mitigate our exposure in this regard, if the sale of these products is cancelled or delayed and we are unable to return or dispose of this inventory on favorable economic terms, we may incur additional carrying costs for the inventory or otherwise record charges associated with this inventory.

​

We may be unable to obtain required export licenses for the sale of our products.

​

Whether with respect to sales to customers located in China or otherwise, products which (i) are manufactured in the United States, (ii) incorporate controlled U.S. origin parts, technology, or software, or (iii) are based on U.S. technology, are subject to the U.S. Export Administration Regulations (“EAR”) when exported to and re-exported from international jurisdictions, in addition to the local jurisdiction’s export regulations applicable to individual shipments. Currently, our laser annealing, MOCVD, MBE, SiC and certain other systems and products are controlled for export under the EAR. Licenses or proper license exceptions may be required for the shipment of our products to certain customers or countries. Obtaining an export license or determining whether an export license exception exists often requires considerable effort by us and cooperation from the customer, which can add time to the order fulfillment process. We may be unable to obtain required export licenses or qualify for export license exceptions and, as a result, we may be unable to export products to our customers and/or meet their servicing needs (potentially requiring us to refund customer prepayments for unperformed contractual obligations). Non-compliance with the EAR or other applicable export regulations could result in a wide range of penalties including the denial of export privileges, fines, criminal penalties, and the seizure of commodities. In the event that an export regulatory body determines that any of our shipments violate applicable regulations, we could be fined significant sums and our export capabilities could be restricted, which could have a material adverse impact on our business and reputation.

​

We face significant competition.

​

We face significant competition throughout the world, which may increase as certain markets in which we operate continue to evolve. Some of our competitors have greater financial, engineering, manufacturing, and marketing resources than us. Other competitors are located in regions with lower labor costs and other reduced costs of operation. In addition, our ability to compete in foreign countries against local manufacturers may be hampered by nationalism, social attitudes, laws, regulations, and policies within such countries that favor local companies over U.S. companies or that are otherwise designed to promote the development and growth of local competitors. Furthermore, we face competition from smaller emerging equipment companies whose strategy is to provide a portion of the products and services we offer, with a focused approach on innovative technology for specialized markets. New product introductions or enhancements by us or our competitors could cause a decline in sales or loss of market acceptance of our existing or prior generation products.

Increased competitive pressure could also lead to intensified price competition resulting in lower profit margins.

​

We operate in industries characterized by rapid technological change.

​

Each of the industries in which we operate is subject to rapid technological change. Our ability to remain competitive depends on our ability to enhance existing products and develop and manufacture new products in a timely and cost effective manner and to accurately predict technology transitions. Our performance may be adversely affected if we are unable to accurately predict evolving market trends and related customer needs and to effectively allocate our resources among new and existing products and technologies.

​

The semiconductor industry, characterized by a high frequency and complexity of technology transitions and inflections, poses unique risks and challenges, including increasingly exacting standards and requirements for performance from Tier 1 customers. Our ability to successfully compete in this market will depend on our ability to address and manage a number of industry-specific risks, including without limitation the following:

​

​

If we fail to properly allocate appropriate resources, successfully develop and commercialize products to meet customer demand, and effectively anticipate industry trends, our business and results of operations may be adversely impacted.

​

In addition, the semiconductor industry has experienced, and may continue to experience, significant consolidation, among both semiconductor manufacturers and manufacturing equipment suppliers. Larger competitors resulting from consolidations may have certain advantages over us, including but not limited to more efficient cost structures, substantially greater financial and other resources, greater presence in key markets, and greater name recognition. Consolidation among our competitors and integration among our customers could erode our market share, negatively impact our ability to compete, and have a material adverse effect on our business.

​

We are also exposed to potential risks associated with unexpected product performance issues. Our product designs and manufacturing processes are complex and could contain unexpected product defects, especially when products are first introduced. Unexpected product performance issues could result in significant costs and damages, including increased service and warranty expenses, the need to provide product replacements or modifications, reimbursement for damages caused by our products, product recalls, related litigation, product write-offs, and disposal costs. Product defects could also result in personal injury or property damage, claims for which may exceed our existing insurance coverages (as may other claims, notwithstanding our efforts to maintain a program of insurance coverage for a variety of property, casualty and other risks). These and other costs could be substantial and our reputation could be harmed, resulting in a reduced demand for our products and a negative impact to our business.

​

In addition, our success is also subject to the risk of future disruptive technologies, including machine learning and artificial intelligence (“AI”). While such technologies offer significant opportunities, they also pose complex and novel risks, including operational risks (such as factual errors or inaccuracies in work product developed using AI), the unintended release of proprietary information, costs of compliance associated with evolving AI laws, regulations and standards, privacy concerns with respect to data dissemination, risks related to intellectual property rights (with respect to both the inputs to the program and ownership rights to AI work product), and risks related to AI’s impact on the workforce.

AI technology is complex and rapidly evolving and its implementation can be costly. There is no guarantee that our use of AI will enhance our technologies, benefit our business operations, or produce products and services that are preferred by our customers. Our competitors may be more successful in their use of AI and may develop superior products and services. While it is not possible at this point to accurately identify or predict all of the risks related to the use of AI technologies, our failure to properly anticipate and timely respond to AI-related developments could adversely affect our business, financial condition, and results of operations.

​

Certain of our sales are dependent on the demand for consumer electronic products and automobiles, which can experience significant volatility.

​

The demand for semiconductors, HDDs and other devices is highly dependent on sales of consumer electronic products, such as smartphones, laptops, tablets and wearable devices. In addition, as a result of the growing automotive semiconductor market, semiconductor demand is also heavily influenced by the demand for automobiles. Factors that could affect the levels of spending on consumer electronic products and automobiles include consumer confidence, access to credit, volatility in fuel and other energy costs, conditions in the residential real estate and mortgage markets, labor and healthcare costs, and other macroeconomic factors affecting consumer spending behavior. The emergence of new or competing technologies may also affect demand for consumer electronic products. These and other factors have had and could continue to have an adverse effect on the demand for our customers’ products and, in turn, on our customers’ demand for our products and services. Furthermore, in the past, some of our customers have overestimated their potential for market share growth. If this growth is overestimated, we may experience cancellations of orders in backlog, rescheduling of customer deliveries, obsolete inventory, and liabilities to our suppliers for products no longer needed. Alternatively, changes that result in sudden increases in demand for consumer electronic products and automobiles may result in a shortage of parts and materials needed to manufacture our products, and attendant shipping delays (both to us and to our customers) and/or the cancellation of orders placed by our customers.

​

We have a concentrated customer base, located primarily in a limited number of regions, which operates in highly concentrated industries.

​

Our customer base continues to be highly concentrated. Orders from a relatively limited number of customers have accounted for, and likely will continue to account for, a substantial portion of our net sales, which may allow customers to demand pricing and other terms less favorable to us (including extended warranties, indemnification commitments, and the obligation to continue production of older products). Customer consolidation activity involving some of our largest customers could result in an even greater concentration of our sales in the future. Management changes at key customer accounts could result in a loss of future sales due to vendor preferences or other reasons and may introduce new challenges in managing customer relationships.

​

If these principal customers discontinue their relationship with us or suffer economic setbacks, our business, financial condition, and operating results could be materially and adversely affected. Our ability to increase sales in the future will depend in part upon our ability to obtain orders from new customers and we cannot be certain that we will be successful in these efforts. In addition, because a relatively small number of large manufacturers, many of whom are our customers, dominate the industries in which they operate, it may be especially difficult for us to replace these customers if we lose their business. A significant portion of orders in our backlog are orders from our principal customers.

​

In addition, a substantial investment is required by customers to install and integrate capital equipment into a production line. As a result, once a manufacturer has selected a particular vendor to supply capital equipment, the manufacturer will often attempt to consolidate its other capital equipment requirements with the same vendor. Accordingly, if a customer selects a competitor’s product over ours, we could experience difficulty selling to that customer for a significant period of time. Furthermore, we typically do not have long-term contracts with our customers. As a result, our agreements with our customers do not provide assurance of future sales, and we are exposed to competitive price pressures on new orders we attempt to obtain.

​

Our customer base is also highly concentrated in terms of geography, and the majority of our sales are to customers located in a limited number of countries.

Dependence upon sales emanating from a limited number of regions increases our risk of exposure to local difficulties and challenges, such as those associated with regional economic downturns, political instability, trade wars and other trade disruptions, fluctuating currency exchange rates, natural disasters, social unrest, regional epidemics, terrorism, and acts of war. Our reliance upon customer demand arising primarily from a limited number of countries could materially and adversely impact our future results of operations.

​

The cyclicality of the industries we serve directly affects our business.

​

Our business depends in large part upon the capital expenditures of manufacturers in our four end-markets: Semiconductor; Compound Semiconductor; Data Storage; and Scientific & Other. We are subject to the business cycles of these industries, the timing, length, and volatility of which are difficult to predict. These industries have historically been highly cyclical and have experienced significant economic downturns in the last decade. As a capital equipment provider, our revenue depends in large part on the spending patterns of our customers, who often delay expenditures or cancel or reschedule orders in reaction to variations in their businesses or general economic conditions. In downturns, we must be able to quickly and effectively align our costs with prevailing market conditions, as well as motivate and retain key employees. However, because a portion of our costs are fixed, our ability to reduce expenses quickly in response to revenue shortfalls may be limited. Downturns in one or more of these industries have had, and will likely have, a material adverse effect on our business, financial condition, and operating results. Alternatively, during periods of rapid growth, we must be able to acquire and develop sufficient manufacturing capacity to meet customer demand and attract, hire, assimilate, and retain a sufficient number of qualified people. Our net sales and operating results may be negatively affected if we fail to accurately predict and effectively respond.

​

Our failure to estimate customer demand accurately could result in inventory obsolescence, liabilities to our suppliers for products no longer needed, and manufacturing interruptions or delays which could affect our ability to meet customer demand.

​

The success of our business depends in part on our ability to accurately forecast and supply equipment and services that meet the rapidly changing technical and volume requirements of our customers. To meet these demands, we depend on the timely delivery of parts, components, and subassemblies from our suppliers. Uncertain worldwide economic conditions and market instabilities make it difficult for us (and our customers) to accurately forecast future product demand. If actual demand for our products is different than expected, we may purchase more or fewer parts than necessary or incur costs for canceling, postponing, or expediting delivery of parts. If we overestimate the demand for our products, excess inventory could result which could be subject to heavy price discounting, which could become obsolete, and which could subject us to liabilities to our suppliers for products no longer needed. Similarly, we may be harmed in the event that our competitors overestimate the demand for their products and engage in heavy price discounting practices as a result. In addition, the volatility of demand for capital equipment poses risks for companies in our supply chain, including challenges associated with inventory management and fluctuating working capital requirements.

​

Furthermore, certain key parts may be subject to long lead-times or may be obtainable only from a single supplier or limited group of suppliers, and some sourcing and assembly is provided by suppliers located in countries other than the United States. We may experience significant interruptions in our manufacturing operations, delays in our ability to timely deliver products or services, increased costs, or customer order cancellations as a result of:

​

​

In addition, in the event of an unanticipated increase in demand for our products, our need to rapidly increase our business and manufacturing capacity may be limited by our working capital constraints and those of our suppliers, which may cause or exacerbate interruptions in our manufacturing and supply chain operations.

Any or all of these factors could materially and adversely affect our business, financial condition, and results of operations.

​

We rely on a limited number of suppliers, some of whom are our sole source for particular components.

​

Certain of the parts, components, and sub-assemblies included in our products are obtained from a single source or a limited group of suppliers. Our inability to develop alternative sources, as necessary, could result in a prolonged interruption in our ability to supply related products, a failure on our part to meet the demands of our customers, and a significant increase in the price of related products, which could adversely affect our business, financial condition, and results of operations.

​

Our failure to successfully manage our outsourcing activities or failure of our outsourcing partners to perform as anticipated could adversely affect our results of operations.

​

To better align our costs with market conditions, increase the percentage of variable costs relative to total costs, and increase productivity and operational efficiency, we have outsourced certain functions to third parties, including the manufacture of several of our systems. While we maintain some level of internal manufacturing capability for these systems, we rely on our outsourcing partners to perform their contracted functions to allow us flexibility to adapt to changing market conditions, including periods of significantly diminished order volumes. If our outsourcing partners do not perform as required, or if our outsourcing efforts do not allow us to realize the intended cost savings and flexibility, our results of operations (and those of our third-party providers) may be adversely affected. Disputes and possibly litigation involving third party providers could result and we could suffer damage to our reputation. Dependence on outsourcing may also adversely affect our ability to bring new products to market. Although we attempt to select reputable providers, one or more of these providers could fail to perform as we expect. If we do not effectively manage our outsourcing efforts or if third party providers do not perform as anticipated, we may not realize the benefits of productivity improvements and we may experience operational difficulties, increased costs, manufacturing and installation interruptions or delays, inefficiencies in the structure and operation of our supply chain, loss of intellectual property rights, quality issues, increased product time-to-market, and an inefficient allocation of our human resources, any or all of which could materially and adversely affect our business, financial condition, and results of operations.

​

The timing of our orders, shipments, and revenue recognition may cause our quarterly operating results to fluctuate significantly.

​

We derive a substantial portion of our net sales in any fiscal period from the sale of a relatively small number of high-priced systems. As a result, the timing for the recognition of revenue for a single transaction could have a material effect on our sales and operating results for a particular fiscal period. As is typical in our industry, orders and shipments often occur during the last few weeks of a quarter. As a result, a delay of only a week or two can impact which period revenue is reported and can cause volatility in our revenue for a given reporting period. Our quarterly results have fluctuated significantly in the past and we expect this trend to continue.

​

Our sales cycle is long and unpredictable.

​

Historically, we have experienced long and unpredictable sales cycles (the period between our initial contact with a potential customer and the time that we recognize revenue from resulting sales to that customer). It is not uncommon for our sales cycle to exceed twelve months. The timing of an order often depends on our customer’s capital expenditure budget, over which we have no control. In addition, the time it takes us to procure and build a product to customer specifications typically ranges from three to twelve months. When coupled with the fluctuating amount of time required for shipment and installation, our sales cycles often vary widely, and these variations can cause fluctuations in our operating results. As a result of our lengthy sales cycles, we may incur significant research and development, selling, general, and administrative expenses before we generate revenue for these products. We may never generate the anticipated revenue if a customer cancels or otherwise changes its purchase plans, or if our evaluation systems do not satisfy customer requirements (which could result in working capital constraints, excess inventory or inventory obsolescence, and other harm to the Company). These risks are particularly prevalent in the semiconductor market, which is often characterized by long customer qualification times, typically twelve to eighteen months. Once qualified, the ramp to volume production can take an additional extended period of time, often twelve to twenty-four months.

During these periods, little to no revenue will be recognized by us, while we will continue to incur research and development costs. Despite our efforts, our products may never be qualified and may never achieve design-tool-of-record (“DTOR”) or production-tool-of-record (“PTOR”) status, and our financial condition and results of operations may be materially and adversely affected.

​

Our backlog is subject to customer cancellation or modification which could result in decreased sales, increased inventory obsolescence, and liabilities to our suppliers for products no longer needed.

​

Customer purchase orders may be cancelled or rescheduled by the customer, sometimes with limited or no penalties, which may result in increased or unrecoverable costs for the Company. We adjust our backlog for such cancellations and contract modifications, among other items. A downturn in one or more of our businesses could result in an increase in order cancellations and postponements.

​

We write-off excess and obsolete inventory based on historical trends, future usage forecasts, and other factors including the amount of backlog we have on hand. If our backlog is canceled or modified, our estimates of future product demand may prove to be inaccurate, in which case we may have understated the reserves required for excess and obsolete inventory. In the future, if we determine that our inventory is overvalued, we will be required to recognize the associated costs in our financial statements at the time of such determination. In addition, we place orders with our suppliers based on our customers’ orders. If our customers cancel their orders with us, we may not be able to cancel our orders with our suppliers. Resulting charges could have a material adverse effect on our results of operations and financial condition.

​

We are exposed to risks associated with business combinations, acquisitions, strategic investments and divestitures.

​

We have completed several significant acquisitions and investments in the past (including our 2023 acquisition of Epiluvac AB, a producer of SiC-based products and technology), and we will consider new opportunities in the future. Acquisitions, investments and other business combinations involve numerous risks, many of which are unpredictable and beyond our control, including the following:

​

​

If we issue equity securities to pay for an acquisition or investment, the ownership percentage of our then-current shareholders would be reduced and the value of the shares held by these shareholders could be diluted, which could adversely affect the price of our stock. If we use cash to pay for an acquisition or investment, the payment could significantly reduce the cash that would be available to fund our operations, pay our indebtedness, or be used for other purposes, which could have a negative effect on our business.

​

In addition, we continually assess the strategic fit of our businesses and may from time to time seek to divest portions of our Company that no longer fit our strategic plan. Divestitures involve significant risks and uncertainties, including the ability to sell such businesses at satisfactory prices, on acceptable terms, and in a timely manner. Divestitures may also disrupt other parts of our businesses, distract the attention of our management, result in a loss of key employees or customers, and require that we allocate internal resources that would otherwise be devoted to operating our existing businesses. Divestitures may expose us to unanticipated liabilities (including those arising from representations and warranties made to a buyer regarding the businesses) and to ongoing obligations to support the businesses following such divestitures, any and all of which could adversely affect our financial condition and results of operations.

​

As a general principle, we seek to invest our capital in areas that we believe best align with our business strategy and will help optimize future returns. Our capital investments may not generate the expected returns or hoped-for results. We may not be able to obtain desired grants, investment tax credits, or other governmental incentives, such as funding through the U.S. CHIPS and Science Act of 2022. Significant judgment is required when assessing and selecting capital investments, and we could invest in projects that are ultimately less profitable than other projects which we do not select, ultimately harming our business, results of operations and financial condition.

​

We are exposed to various risks associated with global regulatory requirements.

​

As a public company with global operations, we are subject to the laws of the United States and multiple foreign jurisdictions, and the rules and regulations of various governing bodies, which may differ among jurisdictions. We are required to comply with legal and regulatory requirements pertaining to such matters as data privacy, anti-corruption, labor laws, immigration, accounting standards, financial disclosures, taxes, cybersecurity, customs, trade, corporate governance, conflict minerals, and antitrust regulations, among others. In addition, we are required to comply with laws and regulations pertaining to carbon emissions and other regulatory requirements addressing climate change concerns. These laws and regulations, which are ever-evolving and at times complex and inconsistent, impose costs on our business and divert management time and attention from revenue-generating activities. Changes to or ambiguities in these laws and regulations may create uncertainty regarding our compliance requirements. While we intend to comply with these regulatory requirements, if we are found by a court or regulatory agency to have failed in these efforts, our business, financial condition, and results of operations could be adversely affected.

​

Risks Related to Intellectual Property and Cybersecurity

​

Disruptions in our information technology systems or data security incidents could result in significant financial, legal, regulatory, business, and reputational harm to us.

​

We are increasingly dependent on information technology systems and infrastructure, including mobile technologies, to operate our business. In the ordinary course of our business, we collect, store, process and transmit significant amounts of sensitive information, including intellectual property, proprietary business information, personally-identifiable information of individuals, and other confidential information, including that of our customers and other business partners. It is critical that we do so in a secure manner to maintain the confidentiality, integrity, and availability of this sensitive information. We have also outsourced elements of our operations (including elements of our information technology infrastructure) to third parties, and as a result, we manage a number of third-party vendors who have access to our computer networks and our confidential information.

​

All information systems are subject to breach and disruption. Potential vulnerabilities can be exploited from inadvertent or intentional actions of our employees, third-party vendors, business partners, or by malicious third parties. Attacks of this nature are increasing in their frequency, levels of persistence, sophistication, and intensity, and are being conducted by sophisticated and organized groups and individuals with a wide range of expertise and motives (including industrial espionage), including organized criminal groups, nation states, and others. In addition to the extraction of sensitive information, attacks could include the deployment of harmful malware, ransomware, or other means which could affect service reliability and threaten the confidentiality, integrity, and availability of information. These risks have been exacerbated by an increase in employees working from home, global conflicts and geopolitical tensions (including increasing tension between the U.S. and China governments), and by the possible use of AI to directly attack information systems with greater speed and efficiency than human bad actors.

​

We have experienced, and our third-party providers have experienced, cybersecurity attacks, some of which have been, and may continue to be, successful. Significant disruptions in our information technology systems (or those of our key suppliers, contract manufacturers, distributors, sales agents and other partners) or other data security incidents could adversely affect our business operations and result in the loss or misappropriation of, and unauthorized access to, sensitive information.

Future or ongoing disruptions or incidents, whether from attacks on our technology environment or from computer viruses, natural disasters, terrorism, war or other causes, could result in a material disruption in our business operations, force us to incur significant costs and engage in litigation, harm our reputation, and subject us to liability under laws, regulations, and contractual obligations.

​

We may be unable to effectively enforce and protect our intellectual property rights.

​

Our success depends in part upon the protection of our intellectual property rights. We rely primarily on patent, copyright, trademark, and trade secret laws, as well as nondisclosure and confidentiality agreements and other methods, to protect our proprietary information, technologies, processes, and brand identity. We own various U.S. and international patents and have additional pending patent applications relating to certain of our products and technologies. The process of seeking patent protection is lengthy and expensive, and we cannot be certain that pending or future applications will result in issued patents or in patents which provide meaningful protection or commercial advantage. In addition, our intellectual property rights may be circumvented, invalidated, or rendered obsolete by the rapid pace of technological change, or through efforts by others to reverse engineer our products or design around patents that we own. Policing unauthorized use of our products and technologies is difficult and time consuming and the laws of other countries may not protect our proprietary rights as fully or as readily as U.S. laws. Given these limitations, our success will depend in part upon our ability to innovate ahead of our competitors.

​

In addition, our outsourcing efforts require that we share certain portions of our technology with our outsourcing partners, which poses additional risks of infringement and trade secret misappropriation. Infringement of our rights by a third party, possibly for purposes of developing and selling competing products, could result in uncompensated lost market and revenue opportunities. Similar exposure could result in the event that former employees seek to compete with us through their unauthorized use of our intellectual property and proprietary information. We cannot be certain that the protective steps and measures we have taken will prevent the misappropriation or unauthorized use of our proprietary information and technologies, nor can we be certain that applicable intellectual property laws, regulations, and policies will not be changed in a manner detrimental to the sale or use of our products.

​

Litigation has been required in the past, and may be required in the future, to enforce our intellectual property rights, protect our trade secrets, and to determine the validity and scope of proprietary rights of others. As a result of any such litigation, we could lose our ability to enforce one or more patents, incur substantial costs, and jeopardize relationships with current or prospective customers or suppliers. Any action we take to enforce or defend our intellectual property rights could absorb significant management time and attention, and could otherwise negatively impact our operating results.

​

We may be subject to claims of intellectual property infringement by others.

​

We receive communications from time to time from other parties asserting the existence of patent or other rights which they believe cover certain of our products. We also periodically receive notices from customers who believe that we are required to indemnify them for damages they may incur related to infringement claims made against these customers by third parties. Our customary practice is to evaluate such assertions and to consider the available alternatives, including whether to seek a license, if appropriate. However, we cannot ensure that licenses can be obtained or, if obtained, will be on acceptable terms or that costly litigation or other administrative proceedings will not occur. If we are not able to resolve a claim, negotiate a settlement of the matter, obtain necessary licenses on commercially reasonable terms, or successfully prosecute and defend our position, our business, financial condition, and results of operations could be materially and adversely affected.

​

Financial, Accounting and Capital Market Risks

​

Our operating results may be adversely affected by tightening credit markets.

​

As a global company with worldwide operations, we are subject to volatility and adverse consequences associated with economic downturns and recessions in different parts of the world. In the event of a downturn, many of our customers may delay or reduce their purchases of our products and services. If negative conditions in the credit markets, such as a recommencement of increases in interest rates, prevent our customers from obtaining credit or necessary financing, product orders in these channels may decrease, which could result in lower revenue.

In addition, we may experience cancellations of orders in backlog, rescheduling of customer deliveries, and attendant pricing pressures. If our suppliers face challenges in obtaining credit, in selling their products, or otherwise in operating their businesses, their ability to continue to supply materials to us may be negatively affected.

​

In addition, we finance some of our sales through trade credit. In addition to ongoing credit evaluations of our customers’ financial condition, we seek to mitigate our credit risk by obtaining deposits and letters of credit on certain of our sales arrangements. We could suffer significant losses if a customer whose accounts receivable we have not secured fails or is otherwise unable to pay us, or if financial institutions providing letters of credit become insolvent. A loss in collections on our accounts receivable would have a negative impact on our financial condition and results of operations.

​

We are subject to foreign currency exchange risks.

​

We are exposed to foreign currency exchange rate risks that are inherent in our anticipated sales, purchase commitments, and assets and liabilities that are denominated in currencies other than the U.S. dollar. Although we attempt to mitigate our exposure to fluctuations in currency exchange rates, hedging activities may not always be available or adequate to mitigate the impact of our exchange rate exposure. Failure to sufficiently hedge or otherwise properly manage foreign currency risks could materially and adversely affect our financial condition, results of operations, and liquidity.

​

We may be required to take impairment charges on assets.

​

We are required to assess goodwill and indefinite-lived intangible assets annually for impairment, or on an interim basis whenever certain events occur or circumstances change, such as an adverse change in business climate or a decline in the overall industry, that would more likely than not reduce fair values below carrying amounts.

​

As part of our long-term strategy, we may pursue future acquisitions of, or investments in, other companies or assets which could increase our assets. We are required to test certain of our assets, including acquired intangible assets, property, plant, and equipment, and equity investments without readily observable market prices, for recoverability and impairment whenever there are indicators of impairment such as an adverse change in business climate. Adverse changes in business conditions or worse-than-expected performance by acquired companies could negatively impact our estimates of future operations and result in impairment charges to acquired assets. For example, during the fourth quarter of 2024, we recorded an asset impairment charge of $28.1 million related to the intangible assets acquired as part of our acquisition of Epliluvac AB. If our assets are further impaired, our financial condition and results of operations could be materially and adversely affected.

​

Changes in accounting pronouncements or taxation rules, practices, or rates may adversely affect our financial results.

​

Changes in, or newly enacted, accounting pronouncements or taxation rules, practices or rates can materially affect our revenue recognition practices, effective tax rates, results of operations, and our financial condition. In addition, varying interpretations of accounting pronouncements or taxation practices, and the questioning of our current or past practices, may adversely affect our reported financial results.

​

Recommendations made pursuant to the Organization for Economic Cooperation and Development’s (“OECD”) Base Erosion and Profit Shifting (“BEPS”) project have led to changes in tax laws in numerous countries and could increase our tax obligations in countries where we do business. As part of BEPS 2.0, the OECD has focused on ensuring multinational businesses with consolidated global revenues in excess of 750 million euros pay their tax in the 'right place' (Pillar 1) and at least at a 'minimum rate' (Pillar 2), including ensuring that multinational enterprises are paying tax at an effective rate of 15% or higher in every jurisdiction in which they operate, regardless of the local headline tax rate or the impact of local tax reliefs. We may be subject to the Pillar Two requirements in the future should our global revenues exceed the Pillar Two thresholds. While we do not currently expect Pillar Two to have a material impact on our effective tax rate, we are in the process of assessing and monitoring potential impacts and developments. These and other developments or changes in federal or international tax laws, rules, practices or rates (including future changes or modifications to existing practices) could have an adverse material impact on our ability to utilize our deferred tax attributes, our effective tax rate and results of operations including cash flows and financial position.

​

In addition, as of each reporting date, we evaluate the realizability of our deferred tax assets which may result in the recognition and/or release of a valuation allowance. Any changes in the valuation allowance will have a direct impact on our effective tax rate. The realization of net deferred tax assets relies on our ability to generate future taxable income, and, as such, if the Company is unable to generate sufficient future taxable income, we may not obtain the full benefit of these deferred tax assets.

​

Finally, we are subject to income tax on a jurisdictional or legal entity basis and significant judgment is required in certain instances to allocate our taxable income to a jurisdiction and to determine the related income tax expense and benefits. Losses in one jurisdiction generally may not be used to offset profits in other jurisdictions. As a result, changes in the mix of our earnings (or losses) between jurisdictions, among other factors, could alter our overall effective income tax rate, possibly resulting in significant tax rate increases. Furthermore, we are regularly audited by various tax authorities, and these audits may result in increased tax provisions which could negatively affect our operating results in the periods in which such determinations are made or changes occur.

​

Our current debt facilities may contain certain restrictions, covenants and repurchase provisions that may limit our ability to raise the funds necessary to meet our working capital needs, which may include the cash conversion of the Notes or repurchase of the Notes for cash upon a fundamental change.

​

As of December 31, 2024, we had $26.5 million in principal amounts outstanding in 2025 Notes, $25.0 million in principal amounts outstanding in 2027 Notes, and $230.0 million in principal amounts outstanding in 2029 Notes (together, the “Notes”). The 2025 Notes subsequently matured in January 2025 and were settled through the issuance of Company shares to the noteholders. In addition, as of December 31, 2024, we had an undrawn senior secured revolving credit facility (the “Credit Facility”) in an aggregate principal amount of $225.0 million, including a $15.0 million letter of credit sublimit.

​

These debt facilities (collectively, the “Debt Facilities”), contain certain covenant and other restrictions that may limit our ability to, among other things, incur additional debt or create liens, sell certain assets, and merge or consolidate with third parties, which may, in turn, preclude us from responding to changes in business and economic conditions, engaging in transactions that might otherwise be beneficial to us. Our ability to comply with some of these covenants is dependent on our future performance, which will be subject to many factors, some of which are beyond our control such as prevailing economic conditions. In addition, our failure to comply with these covenants could result in a default under the Debt Facilities, which could accelerate the debt. If any of our debt is accelerated, we may not have sufficient funds available to repay such debt, which could materially and negatively affect our financial condition and results of operation.

​

In addition, our ability to repurchase or to pay cash upon conversion of the Notes, or maturity of the Credit Facility, may be limited by law, by regulatory authority or by agreements governing our indebtedness that exist at the time of repurchase, conversion, or maturity. Our failure to settle the debt as required would constitute a default under the applicable debt facility and may lead to a default under the other debt facilities. If the payment of the related indebtedness were to be accelerated after any applicable notice or grace periods, we may not have sufficient funds to repay the indebtedness.

​

Finally, holders of the Notes will have the right to require us to repurchase all or any portion of their Notes upon the occurrence of a fundamental change before the maturity date. Additionally, in the event the conditional conversion features of the Notes are triggered (as is currently the case for the 2027 Notes through March 31, 2025), holders of Notes will be entitled to convert the Notes at any time during specified periods at their option. If one or more holders elect to convert the Notes, or if a fundamental change occurs before maturity, unless we elect to deliver solely shares of our common stock to settle such conversion (other than paying cash in lieu of delivering any fractional share), we will be required to make cash payments in respect of the Notes being converted, which could adversely impact our liquidity. Additionally, we may not have enough available cash or be able to obtain financing at the time we are required to make repurchases of the Notes surrendered therefor or pay cash with respect to the Notes being converted. In addition, even if holders do not elect to convert the Notes, we could be required under applicable accounting rules to reclassify all or a portion of the outstanding principal of the Notes as a current rather than long-term liability, which could result in a material reduction of our net working capital.

​

Issuance of our common stock, if any, upon conversion of the Notes, as well as the capped call transactions and the hedging activities of the option counterparties, may impair or reduce our ability to utilize or our research and development credits carryforwards in the future.

​

Pursuant to U.S. federal and state tax rules, a corporation is generally permitted to deduct from taxable income in any year net operating losses (“NOLs”) carried forward from prior years and to reduce from tax liabilities in any year foreign tax credits and R&D credits carried forward from prior years.

​

As of December 31, 2024, we had U.S. federal R&D credits carryforwards of approximately $35.1 million expiring in varying amounts between 2035 and 2044. If we were to experience a “change in ownership” under Section 382 of the Internal Revenue Code (“Section 382”), the federal credits carry forward limitation under Section 383 of the Internal Revenue Code would impose an annual limit on the amount of tax liabilities that may be offset by R&D credits generated prior to the change in ownership. If an ownership change were to occur, we may be unable to use a significant portion of our R&D credit carryforwards to offset future tax liabilities.

​

The shares of common stock, if any, issued upon conversion of the Notes will, upon such issuance, be taken into account when determining the cumulative change in our ownership for Section 382 purposes. As a result, any conversion of the Notes that we elect to settle in shares may materially increase the risk that we could experience an ownership change for these purposes in the future.

​

The capped call transactions may affect the value of the 2027 Notes and our common stock.

​

With respect to the 2027 Notes, we have entered into capped call transactions with certain option counterparties. The capped call transactions were expected generally to reduce the potential dilution upon conversion of the 2027 Notes and/or offset any cash payments we are required to make in excess of the principal amount of converted 2027 Notes, as the case may be, with such reduction and/or offset subject to a cap.

​

The option counterparties or their affiliates may enter into or modify hedge positions by entering into or unwinding various derivatives with respect to our common stock and/or purchasing or selling our common stock or other securities of ours in secondary market transactions prior to the maturity of the 2027 Notes (and are likely to do so during any observation period related to a conversion of the 2027 Notes). This activity could also cause fluctuations in the market price of our common stock and the 2027 Notes, which could affect the ability of the noteholders to convert the 2027 Notes and, to the extent the activity occurs during any observation period related to a conversion of the 2027 Notes, it could affect the number of shares and value of the consideration that noteholders will receive upon conversion of the 2027 Notes.

​

General Risk Factors

​

The price of our common shares is volatile and could decrease.

​

The stock market in general and the market for technology stocks in particular has experienced significant volatility. The trading price of our common shares has fluctuated significantly and could decline independent of the overall market, and shareholders could lose all or a substantial part of their investment. For example, in 2024 our stock price ranged from a closing high of $48.47 to a closing low of $25.99. The market price of our common shares could continue to fluctuate in response to several factors, including among others:

​

Securities class action litigation is often brought against a company following periods of volatility in the market price of its securities. These lawsuits, if and when brought, can result in substantial costs and a diversion of management’s attention and resources, which can adversely affect our financial condition, results of operations, and liquidity.

​

Our inability to attract, retain, and motivate employees could have a material adverse effect on our business.

​

Our success depends largely on our ability to attract, retain, and motivate employees, including those in executive, managerial, engineering and marketing positions, as well as highly skilled and qualified technical personnel. Competition for qualified design and technical personnel is intense, particularly in the semiconductor industry and especially when business cycles are improving. Competitors may try to recruit, and may succeed in recruiting, our most valuable technical employees. To attract and retain key employees, we must provide competitive compensation packages, including cash and stock-based compensation, among other benefits. If the value of our stock-based incentive awards decreases, or if our total compensation packages are not viewed as competitive, our ability to attract and retain key employees could suffer. We do not have key person life insurance on any of our executives, and we may not be able to readily replace key departed employees. Our inability to attract, retain, and motivate key personnel could have a significant negative effect on our business, financial condition, and results of operations.

​

We are subject to risks of non-compliance with environmental, health, and safety regulations.

​

We are subject to environmental, health, and safety regulations in connection with our business operations, including but not limited to regulations relating to the development, manufacture and use of our products, recycling and disposal of related materials, and the operation and use of our facilities and real property. Failure or inability to comply with existing or future environmental, health and safety regulations – including, for example, those relating to carbon emissions, climate change, and the use and sale of products containing hydrofluorocarbons and per- and polyfluoroalkyl substances -- could result in significant remediation liabilities, the imposition of fines, the suspension or termination of research, development, or use of certain of our products, and other harm to the Company, which could have a material adverse effect on our business, financial condition, and results of operations.

​

In addition, changes in environmental laws and regulations, including those relating to greenhouse gas emissions and other climate change matters, could require us (and/or our key suppliers, contract manufacturers and other partners) to install new equipment, alter operations to incorporate new technologies, or implement new processes, among other measures, which may cause us to incur significant costs and divert management attention.

​

We are committed to ensuring safe working conditions, treating our employees with dignity and respect, and sourcing, manufacturing, and distributing our products in a responsible and environmentally friendly manner, and any failure on our part to do so may cause reputational and other harm for the Company. Furthermore, some of our operations involve the storage, handling, and use of hazardous materials that may pose a risk of fire, explosion, or environmental release. Such events could result from acts of terrorism, natural disasters, or operational failures and may result in injury or loss of life to our employees and others, environmental contamination, and property damage.

These events may cause a temporary shutdown of an affected facility, or portion thereof, and we could be subject to penalties or claims as a result. Each of these events could have a material adverse effect on our business, financial condition, and results of operations.

​

Our environmental, social and governance (“ESG”) goals and strategies could be costly to implement, and we are exposed to risks associated with failures to comply with evolving and varying sustainability-related requirements.

​

From time to time the Company communicates its strategies, commitments and targets relating to ESG matters, including initiatives pertaining to climate change, human rights, diversity and inclusion, among others. These strategies, commitments and targets reflect our current plans and aspirations, and we may be unable to achieve them. Furthermore, the standards for measuring and reporting sustainability metrics may change over time and could result in significant revisions to our strategies, commitments and targets, or our ability to achieve them.

​

In addition, several of our key stakeholders -- including customers, investors, advisory firms and suppliers -- have established expectations pertaining to our sustainability practices. Third-party rating agencies have also established standards for a range of sustainability-related matters, which may be inconsistent and are subject to change. These expectations, standards and requirements may impact the manner in which we do business, our costs of doing business, our reputation, and the willingness of our stakeholders to engage with, invest in, or retain us.

​

We are also subject to various sustainability laws and regulations, such as the State of California’s new climate change disclosure rules, the European Union’s Corporate Sustainability Reporting Directive, and the U.S. Securities and Exchange Commission’s rules on climate-related risks. Compliance with such laws and regulations, as well as increased scrutiny from regulators, could result in additional costs and expose us to new risks. Any failure to achieve or satisfy ESG-related regulations, requirements or targets could adversely impact the demand for our products, subject us to significant costs and liabilities, and result in reputational harm.

​

We have adopted certain measures that may have anti-takeover effects, which may make an acquisition of the Company by another company more difficult.

​

We have adopted, and may in the future adopt, certain measures that may have the effect of delaying, deferring, or preventing a takeover or other change in control of the Company, which a holder of our common stock may not consider to be in the holder’s best interest. For example, our board of directors has the authority to issue up to 500,000 shares of preferred stock and to fix the rights (including voting rights), preferences and privileges of these shares (“blank check” preferred stock). Such preferred stock may have rights, including economic rights, senior to our common stock. As a result, the issuance of the preferred stock could have a material adverse effect on the price of our common stock and could make it more difficult for a third party to acquire a majority of our outstanding common stock.

​

In addition, our board of directors is divided into three classes with each class serving a staggered three-year term. The existence of a classified board makes it more difficult for our shareholders to change the composition of our board of directors, and therefore the Company’s policies, in a relatively short period of time. Furthermore, we have adopted certain certificate of incorporation and bylaws provisions which have anti-takeover effects. These include: (a) requiring certain actions to be taken at a meeting of shareholders rather than by written consent, (b) requiring a super-majority of shareholders to approve certain amendments to our bylaws, (c) limiting the maximum number of directors, and (d) providing that directors may be removed only for cause. These measures and those described above may have the effect of delaying, deferring, or preventing a takeover or other change in control of the Company that a holder of our common stock may not consider to be in the holder’s best interest. In addition, we are subject to the provisions of Section 203 of the General Corporation Law of the State of Delaware, which prohibits a Delaware corporation from engaging in any business combination, including mergers and asset sales, with an interested stockholder (generally, a 15% or greater stockholder) for a period of three years after the date of the transaction in which the person became an interested stockholder, unless the business combination is approved in a prescribed manner. The operation of Section 203 may have anti-takeover effects, which could delay, defer, or prevent a takeover attempt that a holder of our common stock may not consider to be in the holder’s best interest. Despite these measures, an activist shareholder could undertake action to implement governance, strategic, or other changes to the Company which a holder of our common stock may not consider to be in the holder’s best interest. Such activities could interfere with our ability to execute our strategic plans, be costly and time consuming, disrupt our operations, and divert the attention of management and our employees.

​

​

Item 1B. Unresolved Staff Comments

​

None.

​

ITEM 1C. Cybersecurity

Cybersecurity represents a critical component of the Company’s overall approach to risk management. Our cybersecurity practices are integrated into the Company’s enterprise risk management (“ERM”) approach, and cybersecurity risks are among the core enterprise risks identified for oversight by our Board of Directors and the Board’s Audit Committee through our annual ERM assessment. Our cybersecurity policies and practices follow the cybersecurity framework of the National Institute of Standards and Technology and other applicable industry standards. We generally approach cybersecurity threats through a cross-functional, multi-layered approach, with the specific goals of: (i) identifying, preventing and mitigating cybersecurity threats to the Company; (ii) maintaining the confidence of our customers, clients and business partners; (iii) preserving the confidentiality of internal and external information; and (iv) protecting the Company’s intellectual property.

Consistent with the Company’s overall ERM practices, our cybersecurity program focuses on the following areas:

A key part of the Company’s strategy for managing risks from cybersecurity threats is the ongoing assessment and testing of the Company’s processes and practices through auditing, assessments, tabletop exercises and other exercises focused on evaluating effectiveness. The Company regularly engages third parties to perform assessments on our cybersecurity measures, including information security maturity assessments and independent reviews of our information security control environment and operating effectiveness and adjusts its cybersecurity processes and practices as necessary.

The Audit Committee oversees the management of risks from cybersecurity threats, including the policies, processes and practices that the Company’s management implements to address risks from cybersecurity threats. Management’s quarterly presentations include reports on a wide range of topics including, for example, recent developments, evolving standards, vulnerability assessments, third-party and independent reviews, the threat environment, technological trends and information security considerations arising with respect to the Company’s peers and vendors. The Board also receives prompt and timely information regarding any cybersecurity incident that could pose a significant risk to the Company and receives ongoing updates regarding such incident until it has been addressed. At least once each year, and more frequently as required, the Board discusses the Company’s approach to cybersecurity risk management with the Company’s Chief Information Security Officer.

The Company’s Chief Information Security Officer is the member of the Company’s management that is principally responsible for overseeing the Company’s cybersecurity risk management program, in partnership with other members of the Information Security Leadership Group. Our Chief Information Security Officer has served in various roles in information technology and information security for over twenty years. Our Chief Information Security Officer holds graduate degrees in cybersecurity and business administration and has attained multiple professional certifications including CISSP, CISA and CISM.

​

The Company’s Chief Information Security Officer, in coordination with the Information Security Leadership Group, works collaboratively across the Company to implement a program designed to protect the Company’s information systems from cybersecurity threats and to promptly respond to any cybersecurity incidents. To facilitate the success of this program, multi-disciplinary teams throughout the Company are deployed to address cybersecurity threats and to respond to cybersecurity incidents in accordance with the Company’s incident response plan. Through ongoing communications with these teams, the Chief Information Security Officer and the Information Security Leadership Group monitor the prevention, detection, mitigation and remediation of cybersecurity incidents in real time, and report such incidents to the Board when appropriate, as addressed above.

​

While we and our third-party providers have in the past experienced cybersecurity incidents, we are not aware of any current incidents or new types of threats which have materially affected or are reasonably likely to materially affect the Company, including its business strategy, results of operations, or financial condition.

Item 2. Properties

​

Our corporate headquarters and principal research and development, manufacturing, and sales and service facilities as of December 31, 2024 are as follows:

​

​

​

In addition to the above, our foreign sales and service subsidiaries lease office space in China, Germany, Japan, Malaysia, Philippines, Singapore, South Korea, Thailand, and Taiwan. We believe our facilities are adequate to meet our current needs.

​

Item 3. Legal Proceedings

​

The discussion under the heading Legal Proceedings within Note 10, “Commitments and Contingencies” to the Consolidated Financial Statements is incorporated herein by reference.

​

Item 4. Mine Safety Disclosures

​

Not Applicable.

​

PART II

​

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

​

Our common stock is quoted on The NASDAQ Global Select Market under the symbol “VECO.” As of February 7, 2025, there were approximately 110 stockholders of record of our common stock. Because many of our shares of common stock are held by brokers and other institutions on behalf of stockholders, we are unable to estimate the total number of stockholders represented by these record holders. We have not paid dividends on our common stock. The Board of Directors will determine future dividend policy based on our consolidated results of operations, financial condition, capital requirements, and other circumstances.

​

Stock Performance Graph

​

​

ASSUMES $100 INVESTED ON DEC. 31, 2019

ASSUMES DIVIDENDS REINVESTED

FISCAL YEAR ENDING DEC. 31

​

​

​

​

Item 6. [Reserved]

​

​

​

​

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

​

Introduction

​

Management’s Discussion and Analysis of Financial Condition and Results of Operations (MD&A) is intended to facilitate an understanding of our business and results of operations. This MD&A should be read in conjunction with our Consolidated Financial Statements and the accompanying Notes to Consolidated Financial Statements included elsewhere in this Form 10-K. The following discussion contains forward-looking statements and should also be read in conjunction with the cautionary statement set forth at the beginning of this Form 10-K.

​

The following section generally discusses 2024 and 2023 items and year-to-year comparisons between 2024 and 2023. Discussions of 2023 items and year-to-year comparisons between 2023 and 2022 that are not included in this Form 10-K can be found in "Management's Discussion and Analysis of Financial Condition and Results of Operations" in Part II, Item 7 of our Annual Report on Form 10-K for the fiscal year ended December 31, 2023, filed on February 16, 2024.

​

Executive Summary

​

We are an innovative manufacturer of semiconductor process equipment. Our proven ion beam, laser annealing, lithography, MOCVD, and single wafer wet processing technologies play an integral role in the fabrication and packaging of advanced semiconductor devices. With equipment designed to optimize performance, yield and cost of ownership, Veeco holds leading technology positions in the markets we serve. To learn more about Veeco’s systems and service offerings, visit www.veeco.com.

​

Veeco executed well during 2024, accomplishing a number of milestones, including:

​

​

​

​

​

​

We believe these accomplishments position us well to capture our largest SAM growth opportunities in the coming years.

Business Update

​

The Semiconductor industry has historically demonstrated cyclicality based on fluctuations in global chip demand and production capacity. Sales in the Semiconductor industry are estimated to have increased year-over-year in 2024 to around $650 billion dollars. Looking ahead, industry analysts are forecasting long-term growth of the industry, driven by secular growth trends such as artificial intelligence, high-performance computing, mobile connectivity, and the electrification of the automotive industry. Additionally, government investments in the Semiconductor industry are projected to accelerate global spending in next-generation technologies.

​

Growth in the Semiconductor industry, coupled with increasing technological complexity of Semiconductor chips, are expected to drive long-term growth in WFE spending. In an effort to improve chip performance, optimize power consumption, and reduce costs, today’s most advanced Semiconductor manufacturers are shrinking device geometries, investing in more complex transistor designs such as Gate-All-Around and exploring 3D architectures. As a result, growth of the WFE market is forecasted to keep pace with long-term growth of the Semiconductor industry, which we believe should benefit semiconductor capital equipment providers, including Veeco.

​

Our strategy of investing in advanced logic and memory has enabled our Semiconductor business to outperform WFE growth for four consecutive years. Veeco’s technologies are at the forefront of enabling new technical innovations in the manufacture of high-performance AI chips and High-Bandwidth Memory (“HBM”). We continue to invest in new technologies to expand our SAM to a broad range of new applications.

​

Semiconductor revenue increased by 13% in 2024 from the prior year, comprising 65% of total revenue. This increase was driven by our Laser Annealing business with both leading and mature node customers. Our laser annealing solutions continue to gain acceptance at advanced logic nodes, highlighted by recent order activity involving both new and existing customers. In 2024, we received laser annealing orders from, and shipped systems to several leading-edge logic customers, including for customers’ Gate-All-Around processes. We also shipped and recognized revenue on our first NSA system to a leading logic customer in the fourth quarter. In the memory market, we continue to ship systems to a Tier 1 customer for high volume production of HBM and advanced DRAM devices. While our growth strategy is predominately focused on advanced node logic and memory, LSA shipments to mature node customers have continued to increase in 2023 and 2024, predominantly driven by new greenfield fabs and capacity additions in China.

​

We have two next generation laser annealing systems under evaluation at Tier 1 foundry and logic customers. This next generation system, the NSA500, covers the nano-second annealing regime and complements our LSA product. This new system is part of our continued effort to enable our customers’ product roadmap by providing innovative annealing solutions. Nanosecond annealing provides Veeco with an opportunity to expand our laser annealing SAM for new advanced node logic and memory applications, including low thermal budget anneals for Gate-All-Around transistors and advanced 3D devices.

​

The ongoing adoption of EUV Lithography for advanced node semiconductor manufacturing continues to drive demand for our Ion Beam Deposition LDD system for mask blanks. Leading logic and memory customers expect EUV and High-Numerical Aperture (“High-NA”) lithography to be integral to their future roadmaps, which our Ion Beam Deposition technology is a key enabler of. Our product roadmap is well positioned as the industry adopts next-generation High-NA EUV lithography, and we are expanding our EUV related business to new mask blank applications.

​

We also have two Ion Beam Deposition “IBD300” systems under evaluation at leading memory customers. Our IBD300 system provides Veeco with another opportunity to expand our SAM to advanced node applications where low resistance films are critical. These initial systems are being evaluated for advanced memory applications, such as DRAM bitline.

​

In Advanced Packaging, our Wet Processing systems are used for several applications, and we continue to see strong demand driven by Heterogenous Integration and 3D Packaging for AI. In the fourth quarter, we announced over $50 million in orders for our Wet Processing systems from a leading foundry, a HBM manufacturer, and OSATs. Our Advanced Packaging lithography systems are used for packaging applications such as fan out wafer level packaging and other advanced packaging solutions. After two years of slow order activity driven by consumer markets, we are beginning to see an increase in quoting and order activity from IDM’s, foundries, and OSAT’s driven by capacity expansions for AI and mobile markets.

​

Looking ahead, we anticipate seeing growth in leading-edge investment driven by new nodes and AI-related demand, including investment in Gate-All-Around nodes, High-Bandwidth Memory, and 3D packaging for AI. At the same time, recent engagement with customers in China has moderated, and we expect a decline in China revenue heading into 2025.

​

Veeco also serves customers in the Compound Semiconductor, Data Storage, and Scientific & Other markets. We address the Compound Semiconductor market with a broad portfolio of technologies, including Wet Processing, MOCVD, MBE and Ion Beam, for Power Electronics, Photonics, and 5G RF applications. Sales in the Compound Semiconductor market declined in 2024 from the prior year. Looking ahead, in the Silicon Carbide market, the slowdown in EV adoption has weakened demand as some customers continue their transition to 200mm production. Additionally, market penetration of our previously acquired Silicon Carbide technology has not met our expectations. In GaN Power, emerging use cases have driven some traditional silicon power electronics manufacturers to consider adoption of GaN at 300mm, and we have an evaluation system outstanding at a Tier 1 Power device customer. We are also seeing photonics opportunities in areas such as solar and MicroLEDs.

​

We address the Data Storage market with sales of our Ion Beam technology. Demand for our Ion Beam products is driven by demand for cloud-based storage. Revenue from our Data Storage products increased in 2024 as compared to the prior year. Looking ahead, while customer utilizations are improving, they remain well below peak levels from a few years ago and customers are not investing to expand new system capacity in 2025 as they bring idle capacity back on line. As a result, we expect an approximate $60 to $70 million reduction in revenue in our Data Storage business in 2025.

​

Sales in the Scientific & Other market are largely driven by sales to governments, universities, and research institutions. We address the Scientific & Other market with several technologies, including MBE, ALD, MOCVD, Wet Processing, and IBD/IBE, which support scientific, optical coating and other applications, and sales in this market declined slightly in 2024 from the prior year.

​

Results of Operations

​

Years Ended December 31, 2024 and 2023

​

The following table presents revenue and expense line items reported in our Consolidated Statements of Operations for 2024 and 2023 and the period-over-period dollar and percentage changes for those line items. Our results of operations are reported as one business segment, represented by our single operating segment.

​

​

Net Sales

​

The following is an analysis of sales by end-market and by region:

​

​

Total sales increased for the year ended December 31, 2024 against the comparable prior year period in the Semiconductor and Data Storage markets, partially offset by a decrease in the Compound Semiconductor, and Scientific & Other markets. By geography, sales increased in the China, and Rest of APAC regions, partially offset by a decrease in the EMEA region. Included within the Rest of APAC region for the year ended December 31, 2024 were sales in Taiwan and Japan of $115.3 million and $67.4 million, respectively, while sales within Rest of APAC region for the year ended December 31, 2023 included sales in Japan, Taiwan, and Singapore of $74.7 million, $62.7 million, and $32.2 million, respectively. We expect there will continue to be year-to-year variations in our future sales distribution across markets and geographies. In light of the global nature of our business, we are impacted by conditions in the various countries in which we and our customers operate.

​

Gross Profit

​

In 2024, gross profit increased compared to 2023 primarily due to an increase in sales volume, partially offset by decreased gross margins. Gross margins decreased principally due to unfavorable product mix of sales and higher service costs. We expect our gross margins to fluctuate each period due to product mix and other factors.

​

Research and Development

​

The markets we serve are characterized by continuous technological development and product innovation, and we invest in various research and development initiatives to maintain our competitive advantage and achieve our growth objectives. Research and development expenses increased in 2024 compared to 2023 primarily due to personnel-related expenses as we invest in new research and development and additional applications for our technology in order to be well-positioned to capitalize on emerging global megatrends and support longer term growth in Semiconductor and Compound Semiconductor markets. However, expenses as a percentage of revenue have remained flat when compared to the prior period.

​

Selling, General, and Administrative

​

Selling, general, and administrative expenses increased in 2024 compared to 2023. However, expenses as a percentage of revenue have remained flat when compared to the prior period. Given the uncertainty regarding the impacts on our business resulting from the general macroeconomic environment, we are focused on the proactive management of expenses.

​

Amortization Expense

​

Amortization expense decreased in 2024 compared to 2023 primarily due to changes in amortization expense to reflect expected cash flows of certain intangible assets, as well as certain other intangible assets becoming fully amortized in 2023.

​

Asset Impairment

​

During 2024, we recorded a non-cash impairment charge of $28.1 million related to intangible assets of our SiC technology acquired from Epiluvac in 2023, due to our market penetration not meeting expectations.

​

Other Operating Expense (Income), Net

​

Net other operating income in 2024 was primarily due to a $21.2 million reduction in the expected earn-out payments to be made to the previous shareholders of Epiluvac, as well as proceeds from the sale of productive assets.

​

Interest Income (Expense)

​

For the year ended December 31, 2024, we recorded net interest income of $1.9 million, compared to $1.2 million of net interest expense for the prior year. The increase in net interest income was primarily related to an increase of interest income of approximately $2.3 million due to a higher interest rate environment for 2024 compared to 2023.

Additionally, the Company had a decrease of interest expense of approximately $0.7 million due to a reduction in convertible note and bank guarantee interest expenses.

​

Other Income (Expense)

​

For the year ended December 31, 2023, we recorded a loss on extinguishment of approximately $97.1 million related to the repurchase and retirement of approximately $206.0 million aggregate principal amount of our 2025 and 2027 Notes.

​

Income Taxes

​

Our income tax benefit for the year ended December 31, 2024, was $4.9 million, compared to income tax expense of $2.0 million for the prior year. The 2024 income tax benefit was primarily attributed to 1) $12.2 million of income tax benefits associated with asset impairments, 2) a $7.9 million income tax benefit related to research and development tax credits, and 3) a $5.1 million income tax benefit related to Foreign-Derived Intangible Income, partially offset by 4) a $20.3 million income tax expense related to pre-tax income from operations. The 2023 income tax expense of $2.0 million was primarily comprised of 1) a $16.2 million income tax expense related to pre-tax income from operations, and 2) a $2.0 million income tax expense related to share-based compensation, partially offset by 3) a $7.5 million income tax benefit related to Foreign-Derived Intangible Income, 4) a $7.7 million income tax benefit associated with research and development tax credits, and 5) a $1.0 million income tax benefit associated with the loss on extinguishment of convertible notes under Section 249 of the Internal Revenue Code of 1986, as amended (Section 249).

​

Liquidity and Capital Resources

​

Our cash and cash equivalents, restricted cash, and short-term investments are as follows:

​

​

A portion of our cash and cash equivalents is held by our subsidiaries throughout the world, frequently in each subsidiary’s respective functional currency, which is typically the U.S. dollar. At December 31, 2024 and 2023, cash and cash equivalents of $45.1 million and $46.8 million, respectively, were held outside the United States. As of December 31, 2024, we had $21.2 million of accumulated undistributed earnings generated by our non-U.S. subsidiaries for which the U.S. repatriation tax has been provided. Approximately $9.6 million of undistributed earnings would be subject to foreign withholding taxes if distributed back to the United States and we accrued $1.2 million for foreign withholding taxes for the undistributed earnings.

​

We believe that our projected cash flow from operations, combined with our cash and short-term investments, will be sufficient to meet our projected working capital requirements, contractual obligations, and other cash flow needs for the next twelve months, including scheduled interest payments on our convertible senior notes, purchase commitments, and payments required under our operating leases.

​

A summary of the cash flow activity for the year ended December 31, 2024 and 2023 is as follows:

​

Cash Flows from Operating Activities

​

​

Net cash provided by operating activities was $63.8 million for the year ended December 31, 2024 and was due to net income of $73.7 million and adjustments for non-cash items of $60.8 million, partially offset by a decrease in cash flow from changes in operating assets and liabilities of $70.7 million. The changes in operating assets and liabilities were largely attributable to an increase in inventories largely related to higher work-in-process and evaluation systems at customer facilities, an increase in contract assets, and a decrease in contract liabilities.

​

Net cash provided by operating activities was $61.7 million for the year ended December 31, 2023 and was due to net loss of $30.4 million and adjustments for non-cash items of $150.5 million, partially offset by a decrease in cash flow from changes in operating assets and liabilities of $58.5 million. The changes in operating assets and liabilities were largely attributable to increases in inventories largely related to evaluation systems at customer facilities, contract assets, prepaid expenses and other current assets, and decreases in accounts payable, and contract liabilities.

​

Cash Flows from Investing Activities

​

​

The cash used in investing activities during the year ended December 31, 2024 was primarily attributable to net cash used for capital expenditures, and net investment activity, partially offset by proceeds from the sale of productive assets. The cash used in investing activities during the year ended December 31, 2023 was attributable to net cash used in the acquisition of Epiluvac, and capital expenditures, partially offset by changes in net investment activity.

​

Cash Flows from Financing Activities

​

​

The cash used in financing activities for the year ended December 31, 2024 was related to cash used to settle taxes related to employee equity programs and a contingent consideration payment related to the Epiluvac acquisition, partially offset by cash received under the Employee Stock Purchase Plan. The net cash used in financing activities for the year ended December 31, 2023 was related to the partial repurchase of the 2025 Notes and 2027 Notes, repayment of the 2023 Notes, a contingent consideration payment related to the Epiluvac acquisition, as well as cash used to settle taxes related to employee equity programs, partially offset by proceeds from issuance of the 2029 Notes.

​

Convertible Senior Notes and Revolving Credit Facility

​

We have $26.5 million outstanding principal balance of 3.50% convertible senior notes that bear interest at a rate of 3.50% per year, payable semiannually in arrears on January 15 and July 15 of each year, and mature on January 15, 2025, unless earlier purchased by the Company, redeemed, or converted. These 2025 Notes subsequently matured in January 2025 and were settled through the issuance of Company shares to the noteholders. In addition, we have $25.0 million outstanding principal balance of 3.75% convertible senior notes that bear interest at a rate of 3.75% per year, payable semiannually in arrears on June 1 and December 1 of each year, and mature on June 1, 2027, unless earlier purchased by the Company, redeemed, or converted. These 2027 Notes are currently convertible by shareholders and callable by the Company until March 31, 2025. In addition, we have $230.0 million outstanding principal balance of 2.875% convertible senior notes that bear interest at a rate of 2.875% per year, payable semiannually in arrears on June 1 and December 1 of each year, and mature on June 1, 2029, unless earlier purchased by the Company, redeemed, or converted.

​

Furthermore, we have access to a $225.0 million revolving credit facility to provide for our working capital needs and reimburse drawings under letters of credit and for other general corporate purposes. The Company has no immediate plans to draw down on the facility, which expires in December of 2026. Interest under the facility is variable based on the Company’s secured net leverage ratio and is expected to bear interest based on SOFR plus a range of 150 to 225 basis points, if drawn. There is a yearly commitment fee of 25 to 35 basis points, based on the Company’s secured net leverage ratio, charged on the unused portion of the Facility.

​

Contractual Obligations and Commitments

​

We have commitments under certain contractual arrangements to make future payments for goods and services, including purchase obligations of $177.4 million as of December 31, 2024 for inventory used in the manufacture of our products, as well as equipment and project materials used to support research and development activities. We generally do not enter into purchase commitments extending beyond one year. At December 31, 2024, we have $18.7 million of offsetting supplier deposits that will be applied against these purchase commitments. We expect to fund these contractual arrangements with cash generated from operations in the normal course of business, as well as existing cash and cash equivalents and short-term investments. In addition, we have bank guarantees and letters of credit issued by a financial institution on our behalf as needed. At December 31, 2024, outstanding bank guarantees and letters of credit totaled $18.1 million and unused bank guarantees and letters of credit of $21.6 million were available to be drawn upon.

​

Lease Obligations

​

As of December 31, 2024, our operating lease obligation was $53.1 million relating to various operating lease arrangements for certain facilities. Refer to Note 10, “Commitments and Contingencies”, of the Notes to the Consolidated Financial Statements for further discussion related to our lease obligations.

​

We believe that we have sufficient capital resources and cash flows from operations to support the above mentioned short-term obligations.

​

Critical Accounting Estimates

​

Our discussion and analysis of our financial condition and results of operations are based upon our Consolidated Financial Statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires a high degree of judgment, either in the application and interpretation of existing accounting literature or in the development of estimates that affect the reported amounts of assets, liabilities, revenues, and expenses. We continuously evaluate our estimates and judgments based on historical experience, as well as other factors that we believe to be reasonable under the circumstances. The results of our evaluation form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. These estimates may change in the future if underlying assumptions or factors change, and actual results may differ from these estimates.

​

We consider the following estimates within our significant accounting policies to be critical because of their complexity and the high degree of judgment involved in maintaining them. See Note 1 Significant Accounting Policies of our Consolidated Financial Statements for additional information regarding our accounting policies.

​

Revenue Recognition

​

We recognize revenue upon the transfer of control of the promised product or service to the customer in an amount that reflects the consideration we expect to receive in exchange for such product or service. We perform the following five steps to determine when to recognize revenue: (1) identification of the contract(s) with customers, (2) identification of the performance obligations in the contract, (3) determination of the transaction price, (4) allocation of the transaction price to the performance obligations in the contract, and (5) recognition of revenue when, or as, a performance obligation is satisfied. Management uses judgements in identifying performance obligations, determining stand-alone selling price (“SSP”) for each distinct performance obligation and allocating consideration from an arrangement to the individual performance obligations based on the SSP. The SSPs are determined based on the prices at which we separately sell systems, upgrades, components, spare parts, installation, maintenance, and service plans. For items that are not sold separately, we estimate SSPs generally using an expected cost plus margin approach. Any material changes in the identification of performance obligations, determination and allocation of the transaction price to performance obligations, and determination of when transfer of control occurs to the customer, could impact the timing and amount of revenue recognition, which could have a material effect on our financial condition and results of operations.

​

Inventory Valuation

​

Inventories are stated at the lower of cost and net realizable value, with cost determined on a first-in, first-out basis. Each quarter we assess the valuation and recoverability of all inventories: materials (raw materials, spare parts, and service inventory); work-in-process; finished goods; and evaluation inventory at customer facilities. Obsolete inventory or inventory in excess of our estimated usage requirements is written down to its estimated net realizable value if less than cost. We evaluate usage requirements by analyzing historical usage, anticipated demand, alternative uses of materials, and other qualitative factors. Unanticipated changes in demand for our products may require a write down of inventory that could materially affect our operating results.

​

Long-lived Assets

​

The carrying values of long-lived assets, including identifiable intangible assets, are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. If circumstances require a long-lived asset or asset group be tested for possible impairment, a recoverability test is performed utilizing undiscounted cash flows expected to be generated by that asset or asset group compared to its carrying amount. If the carrying amount of the long-lived asset or asset group is not recoverable on an undiscounted cash flow basis, impairment is recognized to the extent the carrying amount exceeds its fair value. Fair value is determined through various valuation techniques including discounted cash flow models or, when available, quoted market values and third-party appraisals. It is not possible for us to predict the likelihood of any possible future impairments or, if such an impairment were to occur, the magnitude of any impairment. Intangible assets with finite useful lives, including purchased technology, customer-related intangible assets, patents, trademarks, backlog, and software licenses, are subject to amortization over the expected period of economic benefit to us. We evaluate whether events or circumstances have occurred that warrant a revision to the remaining useful lives of intangible assets. In cases where a revision is deemed appropriate, the remaining carrying amounts of the intangible assets are amortized over the revised remaining useful life.

​

Income Taxes

​

We estimate our income taxes in each of the jurisdictions in which we operate. The calculation of our provision for income taxes and effective tax rate involves significant judgment in estimating the impact of uncertainties in the application of complex and evolving tax laws. Resolution of these uncertainties in a manner inconsistent with our expectations could have a material impact on our results of operations and financial condition. Deferred income taxes reflect the net tax effect of temporary differences between the asset and liability balances recognized for financial reporting purposes and the balances used for income tax purposes, as well as the tax effect of carry forwards. We record a valuation allowance to reduce our deferred tax assets to the amount that is more likely than not to be realized. These estimates consider future operational results including realizability of our deferred tax assets. Deferred tax assets and liabilities are adjusted to reflect the effects of enacted changes in tax rates, laws and status, including changes in tax incentives.

​

Recent Accounting Pronouncements

​

We adopted ASU 2020-06 effective January 1, 2022 and ASU 2023-07 effective December 31, 2024. We are also evaluating other pronouncements recently issued but not yet adopted, including ASU 2023-09 and ASU 2024-03. The adoption of these pronouncements is not expected to have a material impact on our consolidated financial statements. Refer to Note 1, “Significant Accounting Policies,” for additional information.

​

Item 7A. Quantitative and Qualitative Disclosures about Market Risk

​

Interest Rate Risk

​

Our exposure to market rate risk for changes in interest rates primarily relates to our investment portfolio. We centrally manage our investment portfolios considering investment opportunities and risks, tax consequences, and overall financing strategies. Our investment portfolio includes fixed-income securities with a fair value of approximately $198.7 million at December 31, 2024. These securities are subject to interest rate risk and, based on our investment portfolio at December 31, 2024, a 100 basis point increase in interest rates would result in a decrease in the fair value of the portfolio of $1.3 million. While an increase in interest rates may reduce the fair value of the investment portfolio, we will not realize the losses in the Consolidated Statements of Operations unless the individual fixed-income securities are sold prior to recovery or the loss is determined to be other-than-temporary.

​

Currency Exchange Risk

​

We conduct business on a worldwide basis and, as such, a portion of our revenues, earnings, and net investments in foreign affiliates is exposed to changes in currency exchange rates. The economic impact of currency exchange rate movements is complex because such changes are often linked to variability in real growth, inflation, interest rates, governmental actions, and other factors.

These changes, if material, could cause us to adjust our financing and operating strategies. Consequently, isolating the effect of changes in currency does not incorporate these other important economic factors.

​

Changes in currency exchange rates could affect our foreign currency denominated monetary assets and liabilities and forecasted cash flows. We may enter into monthly forward derivative contracts with the intent of mitigating a portion of this risk. We only use derivative financial instruments in the context of hedging and not for speculative purposes and have not designated our foreign exchange derivatives as hedges. Accordingly, changes in fair value from these contracts are included in “Other operating expense (income), net” in our Consolidated Statements of Operations. We execute derivative transactions with highly-rated financial institutions to mitigate counterparty risk.

​

Our net sales to customers located outside of the United States represented approximately 77% of our total net sales in 2024. We expect that net sales to customers outside the United States will continue to represent a large percentage of our total net sales. Our net sales denominated in currencies other than the U.S. dollar represented approximately 5% of total net sales in 2024.

​

A 10% change in foreign exchange rates would have an immaterial impact on the consolidated results of operations since most of our sales outside the United States are denominated in U.S. dollars.

​

Item 8. Financial Statements and Supplementary Data

​

Our Consolidated Financial Statements are listed in the Index to Consolidated Financial Statements and Financial Statement Schedule filed as part of this Form 10-K.

​

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

​

None.

​

Item 9A. Controls and Procedures

​

Management’s Report on Internal Control over Financial Reporting

​

Our principal executive and financial officers have evaluated and concluded that our disclosure controls and procedures are effective as of December 31, 2024. The disclosure controls and procedures are designed to ensure that the information required to be disclosed in this report filed under the Securities Exchange Act of 1934 is recorded, processed, summarized, and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms and is accumulated and communicated to our principal executive and financial officers as appropriate to allow timely decisions regarding required disclosure.

​

Our principal executive and financial officers are responsible for establishing and maintaining adequate internal control over financial reporting, which is a process designed and put into effect to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Using the criteria established in the Internal Control — Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission, Management has evaluated, assessed, and concluded that internal control over financial reporting is effective as of December 31, 2024.

​

KPMG LLP, an independent registered public accounting firm, has audited the consolidated financial statements included in this Annual Report on Form 10-K and, as part of their audit, has issued their report, included herein, on the effectiveness of our internal control over financial reporting.

​

Changes in Internal Control over Financial Reporting

​

During the quarter ended December 31, 2024, there were no changes in internal control that have materially affected or are reasonably likely to materially affect internal control over financial reporting.

​

​

​

Report of Independent Registered Public Accounting Firm

​

To the Stockholders and the Board of Directors

Veeco Instruments Inc.:

​

Opinion on Internal Control Over Financial Reporting

​

We have audited Veeco Instruments Inc. and subsidiaries' (the Company) internal control over financial reporting as of December 31, 2024, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2024, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission.

​

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated balance sheets of the Company as of December 31, 2024 and December 31, 2023, the related consolidated statements of operations, comprehensive income (loss), stockholders’ equity, and cash flows for each of the years in the three-year period ended December 31, 2024, and the related notes and financial statement schedule II - valuation and qualifying accounts (collectively, the consolidated financial statements), and our report dated February 14, 2025 expressed an unqualified opinion on those consolidated financial statements.

​

Basis for Opinion

​

The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

​

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

​

Definition and Limitations of Internal Control Over Financial Reporting

​

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

​

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

​

/s/ KPMG LLP

​

Santa Clara, California
February 14, 2025

Item 9B. Other Information

​

None.

​

PART III

​

Item 10. Directors, Executive Officers and Corporate Governance

​

Information required by this Item that will appear under the headings “Governance,” “Executive Officers,” and “Delinquent Section 16(a) Reports” in the definitive proxy statement to be filed with the SEC relating to our 2025 Annual Meeting of Stockholders is incorporated herein by reference.

​

We have adopted a Code of Ethics for Senior Officers (the “Code”) which applies to our principal executive officer, principal financial officer, principal accounting officer or controller, or persons performing similar functions. A copy of the Code can be found on our website (www.veeco.com). We intend to disclose on our website the nature of any future amendments to and waivers of the Code that apply to the chief executive officer, principal financial officer, principal accounting officer, or persons performing similar functions. We have also adopted a Code of Conduct which applies to all of our employees, including those listed above, as well as to our directors. A copy of the Code of Conduct can be found on our website (www.veeco.com). The website address above is intended to be an inactive, textual reference only. None of the material on this website is part of this report.

​

We have a Securities Trading Policy governing the purchase, sale, and other dispositions of our securities that applies to all our directors, officers, employees, and other individuals associated with us. We believe that our Securities Trading Policy is reasonably designed to promote compliance with insider trading laws, rules and regulations, as well as applicable listing standards. A copy of our Securities Trading Policy is filed as Exhibit 19.1 to this Form 10-K.

​

​

Item 11. Executive Compensation

​

Information required by this Item that will appear under the heading “Compensation” in the definitive proxy statement to be filed with the SEC relating to our 2025 Annual Meeting of Stockholders is incorporated herein by reference.

​

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

​

Information required by this Item that will appear under the headings “Security Ownership of Certain Beneficial Owners and Management” and “Equity Compensation Plan Information” in the definitive proxy statement to be filed with the SEC relating to our 2025 Annual Meeting of Stockholders is incorporated herein by reference.

​

Item 13. Certain Relationships and Related Transactions, and Director Independence

​

Information required by this Item that will appear under the headings “Certain Relationships and Related Transactions” and “Independence of Board” in the definitive proxy statement to be filed with the SEC relating to our 2025 Annual Meeting of Stockholders is incorporated herein by reference.

​

Item 14. Principal Accounting Fees and Services

​

Information required by this Item that will appear under the heading “Independent Auditor Fees and Other Matters” in the definitive proxy statement to be filed with the SEC relating to our 2025 Annual Meeting of Stockholders is incorporated herein by reference.

​

PART IV

​

Item 15. Exhibits, Financial Statement Schedules

​

(a)   (1)  The Registrant’s financial statements together with a separate table of contents are annexed hereto

(2)  Financial Statement Schedules are listed in the separate table of contents annexed hereto.

(3)  Exhibits

​

Unless otherwise indicated, each of the following exhibits has been previously filed with the Securities and Exchange Commission by the Company under File No. 0-16244.

​