株探米国株
英語
エドガーで原本を確認する
6-K 1 newfoundgold6k.htm FORM 6-K

 

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

Form 6-K

 

REPORT OF FOREIGN PRIVATE ISSUER PURSUANT TO RULE 13a-16 OR 15d-16 UNDER THE
SECURITIES EXCHANGE ACT OF 1934

 

For the month of November 2024

 

Commission File Number: 001-39966

 

 

New Found Gold Corp.
(Exact name of registrant as specified in its charter)

 

555 Burrard Street, P.O. Box 272
Vancouver, British Columbia
Canada V7X 1M8

(Address of principal executive office)

 

 

Indicate by check mark whether the registrant files or will file annual reports under cover Form 20-F or 40-F:

 

Form 20-F o Form 40-F þ Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on behalf by the undersigned, thereunto duly authorized.

   

 

 

 

 

 

 


EXHIBIT INDEX

 

     

Exhibit

 

Description

   
99.1   Technical Report

 

 

 

 

 

SIGNATURES

 

 

 

 

      NEW FOUND GOLD CORP.
      (Registrant)
       
       
       
Date: November 15, 2024   By: /s/ Collin Kettell
        Collin Kettell
        Chief Executive Officer

 

 

EX-99.1 2 ex991.htm TECHNICAL REPORT

EXHIBIT 99.1

 

  

 

 

 

NI 43-101 TECHNICAL REPORT

 

NEW FOUND GOLD CORP’S QUEENSWAY GOLD PROJECT

IN NEWFOUNDLAND AND LABRADOR, CANADA:

2024 PROPERTY EXPANSION AND EXPLORATION UPDATE

 

 

 

Prepared For:

 

New Found Gold Corp.

555 Burrard Street
Vancouver, BC V7X 1M8

Canada

 

 Prepared by:

 

 APEX Geoscience Ltd. 1

#100, 11450-160 ST NW,
Edmonton, AB, Canada, T5M 3Y7

 

Jorgensen Engineering and Technical Services, LLC 2

1230 East Jamison Avenue,

Centennial, CO, USA, 80122

 

GL Simmons Consulting, LLC 3

15923 Shadow Mountain Ranch Road, Larkspur, Colorado, USA, 80118

 

 

1 D. Roy Eccles, M.Sc., P. Geol. P. Geo.
2 Mark K. Jorgensen, B.Sc., QP Metallurgy
3 Gary Simmons, B.Sc. QP Metallurgy

 

 

Effective Date: 1 November 2024

Signing Date: 15 November 2024

 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Contents

 

1 Summary 1
  1.1 Issuer and Purpose 1
  1.2 Authors and Site Inspection 1
  1.3 Property Location, Description and Access 1
  1.4 Property Ownership and Option Agreement 2
  1.5 Royalties 2
  1.6 Permits, Environmental Assessment, and Significant Factors 3
  1.7 Geology and Mineralization 3
  1.8 Historical Exploration 4
  1.9 New Found Gold Corp. Ground Exploration 4
  1.10 New Found Gold Corp. Drilling Update 6
  1.11 Metallurgical Test Results 7
  1.12 Conclusions and Uncertainties 8
  1.13 Recommendations 10
2 Introduction 13
  2.1 Issuer and Purpose 13
  2.2 Author and Site Inspection 13
  2.3 Sources of Information 15
  2.4 Units of Measure 16
3 Reliance of Other Experts 18
4 Property Description and Location 20
  4.1 Description and Location 20
  4.2 Property Ownership Summary 28
  4.3 Mineral Tenure Information and Maintenance 29
  4.4 Access and Surface Rights 30
  4.5 Option Agreement (the VOA Option) 31
  4.6 Royalties 32
  4.7 Permits 33
  4.8 Environmental Assessment and Significant Factors 35
5 Accessibility, Climate, Local Resources, Infrastructure and Physiography 37
  5.1 Accessibility 37
  5.2 Site Topography, Elevation and Vegetation 37
  5.3 Climate 40
  5.4 Local Resources and Infrastructure 40
    5.4.1 Power Supply 41
    5.4.2 Water Supply 42
6 History 43
  6.1 Introduction 43
  6.2 Historical Exploration by Companies Other Than New Found Gold Corp. 44
    6.2.1 Prospecting, Geological Mapping, and Geochemical Surveying 48
    6.2.2 Trenching 52
    6.2.3 Geophysical Surveys 53
      6.2.3.1 Airborne Geophysics 53
      6.2.3.2 Ground Geophysics 58
    6.2.4 Labrador Gold Corp. Structural Study 58

 

 

 

 

 

1 November 2024

  i 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

 

    6.2.5 Drilling Overview 59
    6.2.6 Summary of Labrador Gold Corp.’s Historical Drilling 61
    6.2.7 Summary of Sky Gold Corp.’s Historical Drilling 66
    6.2.8 Conclusions and Quality of Historical Data 66
  6.3 Historical Mineral Resource and Mineral Reserve Estimates 68
7 Geological Setting and Mineralization 69
  7.1 Regional Geology 69
  7.2 Property Geology 78
    7.2.1 Geology 78
      7.2.1.1 Appleton Fault: Footwall Domain 78
      7.2.1.1 Appleton Fault: Hangingwall Domain 79
    7.2.2 Preliminary Stratigraphic Framework and Lithological Descriptions 79
    7.2.3 Mineralization - Overview 79
    7.2.4 Alteration 85
    7.2.5 Structure 85
  7.3 Mineralized Zones 87
  7.4 Definition of the Appleton Fault Zone Mineralized Envelope 92
8 Deposit Types 95
  8.1 Orogenic Gold Deposits 95
  8.2 Deposit Type Exploration Strategies 95
9 Exploration 98
  9.1 Historical Overview of New Found Gold Exploration Programs 98
  9.2 Prospecting and Geochemical Rock Samples 100
  9.3 Geochemistry - Till Samples 108
  9.4 Geochemistry - Soil Samples 112
  9.5 Trenching and Channel Sampling 116
  9.6 Keats Gold Prospect Trench Excavation 122
  9.7 QP Opinion on Representativity and Potential Bias of Exploration Samples 125
  9.8 Geophysical Surveys 125
  9.9 Seismic Survey 130
  9.10 Satellite Imagery and Digital Elevation Models 130
10 Drilling 135
  10.1 Drilling Procedures and Core Sampling 139
  10.2 Queensway North Block Prospects 150
    10.2.1 798 Gold Prospect 152
    10.2.2 1744 Gold Prospect 152
    10.2.3 Big Dave Gold Prospect 156
    10.2.4 Big Vein and Pistachio Gold Prospects 158
    10.2.5 Cokes Gold Prospect 159
    10.2.6 Dome and Golden Dome Gold Prospect 164
    10.2.7 Everest Gold Prospect 169
    10.2.8 Gander Outflow Gold Prospect 171
    10.2.9 Glass Gold Prospect 171
    10.2.10 Golden Bullet Gold Prospect 173
    10.2.11 Golden Joint and Golden Joint Hanging Wall Gold Prospects 173
    10.2.12 H Pond Gold Prospect 178

 

 

 

1 November 2024

  ii 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

 

    10.2.13 Honeypot Gold Prospect 178
Figure 10.18 180
Figure 10.19 181
    10.2.14 Iceberg and Iceberg East Gold Prospects 182
    10.2.15 Iceberg Alley Gold Prospect 188
    10.2.16 Jackpot Gold Prospect 191
    10.2.17 K2 Gold Prospect 194
    10.2.18 Keats Gold Prospect 199
    10.2.19 Keats North Gold Prospect 210
    10.2.20 Keats South Gold Prospect 212
    10.2.21 Keats West Gold Prospect 215
    10.2.22 Knob and Rocket Gold Prospects 221
    10.2.23 Little Zone Gold Prospect 223
    10.2.24 Lotto Gold Prospect 224
    10.2.25 Lotto North Gold Prospect 228
    10.2.26 Monte Carlo Gold Prospect 229
    10.2.27 Pocket Pond Gold Prospect 233
    10.2.28 Powerline Gold Prospect 236
    10.2.29 Road Gold Prospect 237
    10.2.30 Trans-Canada Highway - Trans-Canada West Gold Prospect 238
    10.2.31 Whiskey Pocket Gold Prospect 240
  10.3 Queensway South Block Prospects 240
    10.3.1 Aztec Gold Prospect 240
    10.3.2 Devils Pond South and Camp (Bernard’s Pond) Gold Prospects 242
    10.3.3 Devil’s Trench Gold Prospect 244
    10.3.4 Eastern Pond Gold Prospect 244
    10.3.5 Goose Gold Prospect 245
    10.3.6 Greenwood Pond #2 (Greenwood) Gold Prospect 245
    10.3.7 Nebula Gold Prospect 245
    10.3.8 Paul’s Pond, Astronaut, and Nova Gold Prospects 246
  10.4 VOA Option Prospects 250
    10.4.1 69 Zone Gold Prospect 250
    10.4.2 Bigger Vein 2 252
    10.4.3 Hank 1 and Hank 2 Gold Prospects 252
    10.4.4 Home Pond Gold Prospect 253
    10.4.5 Karate Chop South Gold Prospect 253
  10.5 Twin Ponds Block 253
11 Sample Preparation, Analyses and Security 257
  11.1 Sample Collection 257
    11.1.1 Till Samples 257
    11.1.2 Soil Samples 257
    11.1.3 Rock Samples 258
    11.1.4 Drill Core 258
  11.2 Sample Security 258
  11.3 Sample Preparation and Analysis 259
    11.3.1 Introduction 259
         
           

 

 

1 November 2024

  iii 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

         
    11.3.2 Laboratory Accreditation 260
    11.3.3 Laboratory Sample Preparation 260
    11.3.4 Laboratory Analytical Methodologies 262
      11.3.4.1 Eastern Analytical: Fire Assay Analysis 262
      11.3.4.1 ALS Canada Ltd.: Photon Assay 262
      11.3.4.2 ALS Canada Ltd.: Fire Assay and Multi-Element Analysis 263
      11.3.4.3 ALS Canada Ltd.: Specific Gravity and Bulk Density Measurements 264
      11.3.4.4 MSALABS: PhotonAssayTM Analysis 265
      11.3.4.5 PhotonAssayTM Versus Conventional Screen Fire Assay Comparisons 266
      11.3.4.6 Activation Laboratories Ltd.: Multi-Element Analysis 269
      11.3.4.7 SGS Canada Inc.: Gold Analysis 269
      11.3.4.8 Overburden Drilling Management: Till Gold Grain Counts 269
      11.3.4.9 General Comments on Screen Fire Assays 269
  11.4 Quality Assurance and Quality Control 270
    11.4.1 Certified Reference Materials 270
      11.4.1.1 Certified Reference Materials: Fire Assay and Photon Assay at ALS 271
      11.4.1.1 Certified Reference Materials: Fire Assay, Eastern Analytical 271
      11.4.1.1 Certified Reference Materials: PhotonAssayTM, MSALABS 271
    11.4.2 Sample Blanks (Eastern Analytical, ALS, and MSALABS) 273
    11.4.3 Core Duplicates 274
    11.4.4 Precision of Laboratory Duplicates: By Fire Assay 277
    11.4.5 Precision of Laboratory Duplicates: By PhotonAssayTM 279
    11.4.6 Check Assays 281
    11.4.7 Percentage of Coarse Gold 285
  11.5 Opinion on the Adequacy of New Found Gold Corp.’s Sample Collection, Preparation, Security, and Analytical Procedures 285
  11.6 Opinion on the Adequacy of Labrador Gold Corp.’s Sample Collection, Preparation, Security, and Analytical Procedures 287
12 Data Verification 288
  12.1 Data Verification Procedures 288
  12.2 Historical Exploration Information 288
  12.3 New Found Gold Corp.’s Ground Geochemical, Drillhole, and Drill Core Assay Databases 289
  12.4 Qualified Person Site Inspection 289
  12.5 Data Limitations 291
  12.6 Adequacy of the Data 293
13 Mineral Processing and Metallurgical Testing 295
  13.1 Historical Metallurgical Work 295
  13.2 Sample Selection and Preparation 295
    13.2.1 Sample Preparation 300
  13.3 Metallurgical Testing 301
    13.3.1 Sample Characterization 301

 

 

 

1 November 2024

  iv 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

 

    13.3.2 Master Composite Testing 303
      13.3.2.1 Comminution Testing 303
      13.3.2.2 Gravity Recoverable Gold (GRG) 304
      13.3.2.3 Gravity Tail Leach Evaluation 304
      13.3.2.4 Gravity Concentrate Intensive Cyanide Leaching 305
      13.3.2.5 Cyanide Detoxification Testing 305
    13.3.3 Variability Composite Testing 305
      13.3.3.1 Arsenic Content vs Gold Tails Grade 306
    13.3.4 Alternative Process Selection 307
    13.3.5 Process Selection 309
    13.3.6 Reagent Consumptions (Carbon-In-Leach) 309
    13.3.7 Risk Analysis 309
    13.3.8 Future Metallurgical Testing 311
14 Mineral Resource Estimates 311
23 Adjacent Properties 313
24 Other Relevant Data and Information 317
25 Interpretation and Conclusions 318
  25.1 Exploration Results and Interpretations 318
  25.2 Qualified Person Opinion on NFG’s Exploration Programs 321
  25.3 Metallurgical Test Results 322
  25.4 Risks and Uncertainties 323
26 Recommendations 324
27 References 327
28 Certificate of Author 336

 

Tables

 

Table 1.1 Future work recommendations. 12
Table 4.1 Queensway Project mineral licence description and status 23
Table 4.2 Minimum expenditures for mineral claims in Newfoundland and Labrador. 30
Table 4.3 Renewal fees for mineral claims in Newfoundland and Labrador. 30
Table 4.4 Environmental permits, licences, and approvals. 35
Table 6.1 Summary of select historical exploration work conducted by companies other than NFG. 47
Table 6.2 Summary of historical drilling at Queensway. 61
Table 6.3 Select Big Vein prospect drill core assay interval results. 64
Table 6.4 Select Pristine prospect drill core assay interval results. 65
Table 6.5 Select Golden Glove prospect drill core assay interval results. 65
Table 9.1 Sampling summary from NFG’s exploration at the Queensway Property. 101
Table 9.2 Select channel assay intervals for the Keats Main trench. 123
Table 10.1 Summary of drillholes from NFG’s diamond drilling program. 137
Table 10.2 Summary of drill core sample gold assays. 138
Table 10.3 Description of NFG drillholes at the Queensway Gold Project. 141
Table 10.4 Select drillhole assay intercepts for the 1744 prospect. 152
Table 10.5 Select drillhole assay intercepts for the Big Dave prospect. 156
Table 10.6 Select drillhole assay intercepts for the Big Vein and Pistachio prospects. 159
Table 10.7 Select drillhole assay intercepts for the Cokes prospect. 163

 

 

1 November 2024

  v 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

Table 10.8 Select drillhole assay intercepts for the Dome prospect. 164
Table 10.9 Select drillhole assay intercepts for the Golden Dome prospect. 165
Table 10.10 Select drillhole assay intercepts for the Everest prospect. 169
Table 10.11 Select drillhole assay intercepts for the Glass prospect. 171
Table 10.12 Select drillhole assay intercepts for the Golden Joint prospect. 177
Table 10.13 Select drillhole assay intercepts for the Honeypot prospect. 179
Table 10.14 Select drillhole assay intercepts for the Iceberg prospect. 185
Table 10.15 Select drillhole assay intercepts for the Iceberg East prospect. 187
Table 10.16 Select drillhole assay intercepts for the Iceberg Alley prospect. 191
Table 10.17 Select drillhole assay intercepts for the Jackpot prospect. 192
Table 10.18 Select drillhole assay intercepts for the K2 prospect. 200
Table 10.19 Select drillhole assay intercepts for the Keats Main Zone. 208
Table 10.20 Select drillhole assay intercepts for the Keats FW. 209
Table 10.21 Select drillhole assay intercepts for the Keats HW. 210
Table 10.22 Select drillhole assay intercepts for the Keats North prospect. 211
Table 10.23 Select drillhole assay intercepts for the Keats South prospect. 213
Table 10.24 Select drillhole assay intercepts for 421 Zone at Keats South prospect. 214
Table 10.25 Select drillhole assay intercepts for the Keats West prospect. 220
Table 10.26 Select drillhole assay intercepts for the Knob prospect. 222
Table 10.27 Select drillhole assay intercepts for the Rocket prospect. 223
Table 10.28 Select drillhole assay intercepts for the Little Zone prospect. 224
Table 10.29 Select drillhole assay intercepts for the Lotto FW. 225
Table 10.30 Select drillhole assay intercepts for the Lotto Main Zone. 226
Table 10.31 Select drillhole assay intercepts for the Sunday Zone. 226
Table 10.32 Select drillhole assay intercepts for the Lotto North prospect. 229
Table 10.33 Select drillhole assay intercepts for the Monte Carlo prospect. 230
Table 10.34 Select drillhole assay intercepts for the Pocket Pond prospect. 236
Table 10.35 Select drillhole assay intercepts for the Powerline prospect. 237
Table 10.36 Select drillhole assay intercepts for the Road prospect. 238
Table 10.37 Select drillhole assay intercepts for the TCH prospect. 239
Table 10.38 Select drillhole assay intercepts for the TCW prospect. 239
Table 10.39 Select drillhole assay intercepts for the Devils Pond South and Camp prospects. 242
Table 10.40 Select drillhole assay intercepts for the Astronaut prospect. 249
Table 10.41 Select drillhole assay intercepts for the Nova prospect. 250
Table 11.1 Analytical methods used by Eastern Analytical. 262
Table 11.2 Photon Assay methods used by ALS. 263
Table 11.2 Analytical methods used by ALS. 264
Table 11.3 MSALABS analytical methods used at the NFG Queensway Project. 265
Table 11.4 Overview of OREAS Certified Reference Materials. 270
Table 11.5 Summary statistics on CRMs assayed at ALS using fire assay technique. 272
Table 11.6 Summary statistics on CRMs assayed at ALS using the PhotonAssay™ technique. 273
Table 11.7 Summary statistics on CRMs assayed at Eastern Analytical. 273
Table 11.8 Summary statistics on CRMs assayed at MSALAB using the PhotoAssayTM, technique. 273

 

1 November 2024

  vi 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

Table 12.1 Qualified Person validation of 6 drillhole collar locations at the Keats Main and Keats North prospects. 290
Table 12.2 Summary of Qualified Person-collected core samples to validate gold mineralization. 293
Table 13.1 Mineralized Zone and Number of Variability Composites. 297
Table 13.2 Master and Variability Composite Summary. 300
Table 13.3 Master Composite Comminution Test Summary 303
Table 13.4 Master Composite CIL and Direct Leach Extractions 304
Table 13.5 Summary of Cyanide Detoxification Testing 305
Table 13.6 Summary of Variability Composite Gravity/CIL Extractions. 306
Table 13.7 Arsenic Versus Gold Tails Grade Relationship 307
Table 13.8 Carbon and/or Sulfide Flotation/CIL Tailings Study Results 308
Table 13.9 Risks associated with gold extraction and mineral processing. 309
Table 26.1 Future work recommendations. 326

 

Figures

 

Figure 2.1 General location of New Found Gold Corp.’s Queensway Gold Project. 14
Figure 4.1 Queensway Project and five contiguously-defined sub-property ‘blocks’. 22
Figure 4.2 Queensway North mineral licences, and the separate licences of Twin Ponds, Ten Mile-Duder Lake, Bellman’s Pond, and Little Rocky Brook.. 26
Figure 4.3 Queensway South mineral licences. 27
Figure 5.1 Access to the Queensway Property. 38
Figure 5.2 Shaded relief image for the Queensway Project area. 39
Figure 5.3 Climate data for Gander International Airport.. 41
Figure 6.1 Mineral prospects in the Queensway Property area.. 45
Figure 6.2 Location of historical exploration programs conducted other companies.. 46
Figure 6.3 Historical till gold assay analytical results.. 49
Figure 6.4 Historical soil gold assay analytical results.. 54
Figure 6.5 Historical stream and lake sediment gold assay analytical results.. 55
Figure 6.6 Historical rock gold assay analytical results. 56
Figure 6.7 Historical trench channel sample gold assay analytical results. 57
Figure 6.8 Historical drillholes (by company).. 60
Figure 6.9 Locations of historical drilling completed by Labrador Gold Corp. 62
Figure 6.10 Big Vein and Big Vein Southwest geological and diamond drill summary. 64
Figure 6.11 Doyle Zone-Pristine prospect geological and diamond drill summary. 65
Figure 7.1 Regional distribution of the main lithotectonic elements 70
Figure 7.2 Correlation of major suture zones across the Atlantic. 70
Figure 7.3 Newfoundland’s Bedrock geology and major tectonic zones 71
Figure 7.4 Middle Cambrian to early Ordovician tectonic development 73
Figure 7.5 Early to middle Ordovician to early Silurian tectonic model f 74
Figure 7.6 Early to middle Ordovician to early Silurian tectonic model. 76
Figure 7.7 Bedrock geology of the Queensway Area 77
Figure 7.8 Stratigraphic column 80
Figure 7.9 Integrated geological map of lithology, shear zones and gold showings 81
Figure 7.10 Interpretation of structure and lithology on a north-facing Queensway North block cross-section 82

 

 

1 November 2024

  vii 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

Figure 7.11 Typical gold-bearing quartz vein styles observed at Queensway 83
Figure 7.12 Images of core from mineralized intervals in drillhole NFGC-19-01 83
Figure 7.13 Plan map of the area between the Grouse and Everest prospects 84
Figure 7.14 Schematic illustration of mineralogical changes in white micas 86
Figure 7.15 Schematic cross-section illustrating the S1 and S0 parallel fabrics. 86
Figure: 7.16 Schematic plan map illustrating conjugate shear orientations 87
Figure 7.17 Left: Stereographic plot illustrating the orientation of D2 structures. 87
Figure 7.18 Gold prospects and zones within the Queensway Property. 89
Figure 7.19 Gold prospects and zones within the Queensway North Block. 90
Figure 7.20 Gold prospects and zones within the Queensway South Block. 91
Figure 7.21 Gold mineralization and prospects along the Appleton Fault Zone 93
Figure 7.22 Cross section across the Keats West and North, and Iceberg prospects. 94
Figure 8.1 Schematic for orogenic gold deposits at various depths 96
Figure 8.2 Comparison of drill core samples from Queensway and Fosterville Mine, Australia. 96
Figure 9.1 Locations of rock samples collected from NFG’s prospecting programs. 102
Figure 9.2 Locations of surface rock samples with greater than 0.5 ppm Au. 103
Figure 9.3 Location of glacial till samples at the Queensway Property. 109
Figure 9.4 Locations of till samples with 10 or more moderate-pristine gold grains. 110
Figure 9.5 Till samples with gold grades above 1 ppm Au. 111
Figure 9.6 Locations of soil samples, colour coded by sampling year. 114
Figure 9.7 Overview of soil sampling gold analytical results in the Devils Pond South, Camp, Greenwood, Aztec, Goose, Astronaut/Nova, and Nebula prospects. 115
Figure 9.8 2023 Soil sample gold assay results at the Queensway Property. 117
Figure 9.9 Location of trenches at the Queensway Property. 118
Figure 9.10 Channel sample gold assay results 121
Figure 9.11 Keats trench plan view map 124
Figure 9.12 First derivative of chargeability from 2021 geophysical survey. 127
Figure 9.13 Lithological and structural geophysical interpretation 129
Figure 9.14 Three-dimensional seismic survey source lines across the Appleton and Joe Batt’s Pond fault zones 131
Figure 9.15 Preliminary 3-D cube cross-section interpretation. 132
Figure 9.16 2023 LiDAR Bare Earth image over the Queensway Property. 134
Figure 10.1 Drill collar locations from NFG’s drilling programs. 136
Figure 10.2 Histograms of drillhole orientations and end of hole depths. 140
Figure 10.3 Gold vein surface intersections for prospects along the Appleton and Joe Batt’s Pond fault zones. 151
Figure 10.4 Drillhole collar locations along the Joe Batt’s Pond Fault Zone 153
Figure 10.5 Plan view of 1744 prospect 154
Figure 10.6 Longitudinal section through the 1744 and Glass prospects 155
Figure 10.7 Drill collar locations at the Big Dave and Lonely Mountain prospects. 157
Figure 10.8 Big Vein, Pistachio, and Pristine gold prospects. 160
Figure 10.9 Drill collar locations of the Big Vein and Pistachio prospects 161
Figure 10.10 Drill collar locations at the Cokes, Keats, Keats North, Keats South, and Keats West prospects. 162

 

 

1 November 2024

  viii 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

Figure 10.11 Drill collar locations at the Dome, Golden Joint, K2, K2 West, Little Zone, Lotto, Lotto North, Monte Carlo, Road, and Powerline prospects 166
Figure 10.12 Plan view of the Road, Dome, Golden Joint, Lotto, Lotto North, and Zone 36 prospects 167
Figure 10.13 Longitudinal section through the Golden Joint, Dome, Golden Dome, Lotto, and Lotto North prospects 168
Figure 10.14 Drill collar locations at the Everest, Honeypot, and Jackpot prospects. 170
Figure 10.15 Drill collar locations at the Gander Outflow, Knob, Kings Point, Golden Bullet, Rocket, TCH and TCW prospects. 172
Figure 10.16 Plan view of Keats, TCH, Rocket, Golden Bullet, and Knob prospects. 174
Figure 10.17 Cross-section through the Golden Joint and Golden Joint Hanging Wall prospects. 175
Figure 10.18 Longitudinal section through the Honeypot prospect 180
Figure 10.19 Plan view of the K2, Honeypot and Jackpot prospects. 181
Figure 10.20 Drill collar locations at the Iceberg, Iceberg East, and Iceberg Alley prospects 183
Figure 10.21 Photos of mineralization from drillhole NFGC-23-1210 184
Figure 10.22 Plan view of the Iceberg and Iceberg East prospects 189
Figure 10.23 Longitudinal section (image above) through the Iceberg, Iceberg East and Iceberg Alley prospects within the KBFZ. 190
Figure 10.24 Longitudinal section through the Jackpot prospect, 193
Figure 10.25 Plan view of the K2 prospect 195
Figure 10.26 Longitudinal section through the K2 prospect 196
Figure 10.27 Modelled cross-section through the K2 prospect 197
Figure 10.28 Inclined three-dimensional mineralization model for the K2 prospect 198
Figure 10.29 Plan view of the Keats (Main) prospect 201
Figure 10.30 Three-dimensional plan view map of the Keats prospect.. 202
Figure 10.31 Core photographs from NFGC-19-01. 203
Figure 10.32 Longitudinal section of the TCH, Keats South, and Keats prospects,. 204
Figure 10.33 Keats cross-sections. 205
Figure 10.34 Keats South deep drilling 3D cross-section. 214
Figure 10.35 Plan view of the Keats West, and Cokes prospects 216
Figure 10.36 Cross-section through the Keats West prospect 217
Figure 10.37 Inclined 3D mineralization model for the Keats West prospect 218
Figure 10.38 Cross-section through the Lotto prospect 227
Figure 10.39 Plan view of the Monte Carlo and Powerline prospects 231
Figure 10.40 Longitudinal section through the Monte Carlo prospect 232
Figure 10.41 Plan view of Pocket Pond Zone 234
Figure 10.42 Longitudinal section through the Pocket Pond prospect, 235
Figure 10.43 Drill collar locations at the Mars, Potato Patch, Devils Pond, Nebula, Astronaut/Nova, Greenwood, and Eastern Pond prospects 241
Figure 10.44 Plan view of the Devils Pond South and Camp Zone prospects 243
Figure 10.45 Plan view of the Goose, Nova, Astronaut, and Nebula prospects. 247
Figure 10.46 Photographs of drill core from the Astronaut and Nova prospects. 248
Figure 10.47 Plan view of the VOA Option gold prospects. 251
Figure 10.48 Drill collar locations at the Twin Ponds Block 255

 

 

1 November 2024

  ix 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

Figure 10.49 Core photo of quartz vein zone-breccia, cockade, and banded textures within Twin Ponds drillhole NFGC-TP-22-01 256
Figure 11.1 Comparison of MSALABS PhotonAssayTM vs ALS FA gold assays. 267
Figure 11.2 Comparison of MSALABS PA vs ALS FA gold assays 268
Figure 11.3 Comparison of two halves of the core for gold. 276
Figure 11.4 Core duplicate assays compared for larger sample aliquots. 276
Figure 11.5 Comparison of 30-g and 50-g gold assays on pulps. 278
Figure 11.6 ALS Internal preparation duplicates. 279
Figure 11.7 MSALABS analytical duplicates. 280
Figure 11.8 Duplicate jar assays by PhotonAssayTM. 281
Figure 11.9 Comparison of 50-g Fire Assays at ALS and SGS. 282
Figure 11.10 Check Assays for Fine Fractions at SGS. 283
Figure 11.11 Check assays for MSA PhotonAssay™ samples by fire assay at ALS. 284
Figure 11.12: Comparison of Screen Fire Assay and PhotonAssay™ for over 100 ppm Au. 285
Figure 11.13 Percentage of gold in the coarse fraction in ALS screen fire assays. 286
Figure 12.1 Drillhole collar locations of Qualified Person-collected core samples. 292
Figure 13.1 Plan view map of metallurgical sections from Keats, Golden Joint, Lotto, Iceberg and Iceberg East. 296
Figure 13.2 Keats Main - 1 section with drillholes selected for metallurgical testing.. 297
Figure 13.3 Cross section of Keats Main - 2 drillholes selected for metallurgical testing.. 298
Figure 13.4 Cross section of Keats Main - 4 drillholes selected for metallurgical testing.. 298
Figure 13.5 Cross section of Lotto drillholes selected for metallurgical testing 299
Figure 13.6 Golden Joint section drillholes selected for metallurgical testing.. 299
Figure 13.7 Cross section of Iceberg #3 drillholes selected for metallurgical testing.. 300
Figure 13.8 - Gold Deportment and Gold Grain Size for the Keats, Lotto and Iceberg Zones 302
Figure 13.9 Arsenic Content vs Gold Tails Grade for Gold Head Grades 307
Figure 13.10 Queensway Project Process Flow Sheet. 310
Figure 23.1 Adjacent properties to the Queensway Gold Property 314

 

 

 

1 November 2024

  x 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

1 Summary

 

1.1 Issuer and Purpose

 

This technical report has been prepared for the Issuer, New Found Gold Corp. (NFG), a publicly traded junior mineral exploration company based in Vancouver, BC, Canada. NFG’s current exploration project includes the Queensway Gold Project in northeast Newfoundland of the Canadian province Newfoundland and Labrador.

 

Since NFGs previous report, NFG has 1) acquired 100% interest in Labrador Gold Corp.’s Kingsway Project including 4 licences (311 claims), 2) acquired 100% interest in 3 licences (54 claims) from Sky Gold Corp., and 3) completed new diamond drilling at the Big Vein, Dome, Dropkick, Everest, Golden Dome, Golden Glove, Golden Joint, Green Mantle, Honey Pot, Iceberg, Iceberg Alley, Jackpot, Keats South and West, Knobby, Lotto North, Monte Carlo, Pistachio, Pristine, and Road gold prospects. The intent of this report, therefore, is to provide a technical update on NFG’s current Queensway Gold Project expanded land position and new exploration activities at the Queensway Property through to an Effective Date of 1 November 2024.

 

This technical report has been prepared in accordance with the Canadian Institute of Mining, Metallurgy and Petroleum Mineral Exploration Best Practice Guidelines (2018) and the Canadian Securities Administration’s National Instrument 43-101 Standards of Disclosure for Mineral Projects. This technical report has an Effective Date of 1 November 2024 and supersedes and replaces all previous NFG reports.

 

1.2 Authors and Site Inspection

 

This technical report has been prepared by Mr. Roy Eccles P. Geol. P. Geo., Mr. Mark Jorgenson QP Metallurgy, and Mr. Gary Simmons QP Metallurgy. Apart from Section 13, Mr. Eccles takes responsibility for all report items; Mr. Jorgenson and Mr. Simmons take responsibility for Section 13. All authors are Qualified Persons as defined in NI 43-101 and are independent of New Found Gold Corp. and the Queensway Property.

 

All 3 authors have completed Qualified Person site inspections at the Queensway Property: Most recently, Mr. Eccles on January 12-13, 2023, Mr. Simmons on October 19, 2023, and Mr. Jorgensen on November 29, 2023. The site inspections enabled the Qualified Persons to 1) observe the overall geological setting of the Queensway Property, 2) understand and observe the exploration work conducted by NFG including active diamond drilling, 3) independently validate the gold mineralization that is the subject of this technical report, and 4) collect and understand the nature of core material for metallurgical test work.

 

1.3 Property Location, Description and Access

 

The Queensway Property comprises 7,024 claims within 103 mineral licences and encompasses an area of 175,600 ha. The Trans-Canada Highway transects the northern Queensway Property and extends from approximately 15 km west of the Town of Gander to Appleton, NL, and south to the Bay d'Espoir Highway (Route 360). The licences can be separated spatially into 6 separate, contiguous and non-contiguous groups of licences, or blocks, that include two large contiguous blocks (Queensway North and Queensway South) and 4 smaller non-contiguous blocks (Twin Ponds, Ten Mile-Duder Lake, Bellman’s Pond, and Little Rocky Brook) all north of Queensway North.

1 November 2024

  1 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

The Queensway Property can be accessed by commercial airlines to the Gander International Airport and by vehicle from the Town of Gander via the Trans-Canada Highway which passes through the Queensway North and the Twin Ponds blocks. The Property can also be accessed by secondary highways, gravel access roads, All Terrain Vehicle trails, the NL T’Railway, winter roads, and by boat along the shores of Gander Lake. The Property can also be accessed by helicopter from bases at the towns of Appleton and Gander, NL, and from small craft float planes based at the international airport in Gander.

 

The nearest seaports are north of the Trans-Canada Highway at the towns of Lewisporte and Botwood, NL, which are approximately 40 and 70 km, respectively, by road from the Town of Glenwood, NL. Both port locations have established harbour facilities and developable capabilities. The deep-water port at Botwood was the export location for Cu-Pb-Zn concentrates from the former ASARCO Buchans Mines.

 

1.4 Property Ownership and Option Agreement

 

Most of the Queensway Property claims (92.2%) are fully owned by NFG (n=6,473 claims within 99 mineral licences). Additionally, 7.8% of the Queensway Property claims (n=551 claims within 5 mineral licences) are currently owned by separate licence holders and are subject to NFG satisfying conditions of a single VOA Option Agreement.

 

1.5 Royalties

 

Seventy-eight of the 103 Queensway Property mineral licences (76%) are currently subject to a Net Smelter Return (NSR) royalty; the other 25 licences are not subject to any royalty. Some royalties were formed within agreements between NFG and the various individuals and companies that optioned their mineral rights to NFG in return for financial compensation that included Net Smelter Return royalties. Others arise from financing provided by GoldSpot Discoveries Corp. (GoldSpot) in 2019. All claims acquired after the NFG-GoldSpot agreement execution date and contiguous to the NFG-GoldSpot agreement original claims are also subject to a 1% Net Smelter Return royalty to GoldSpot less royalties at their time of acquisition.

 

Currently, the Net Smelter Return royalties range from 0.4% to 3.0% for 78 licences subject to a Net Smelter Return royalty. Many of NFG’s option and financing agreements have included a buy-back provision that allows the company to reduce the Net Smelter Return royalty by making a lump-sum payment to the holder of the royalty. NFG has already exercised the buy-back option on some of its agreements. Were NFG to exercise its buy-back rights, the Net Smelter Return royalties would range between 0.4% and 1.5% for the 28 licences that are subject to a Net Smelter Return royalty.

1 November 2024

  2 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

1.6 Permits, Environmental Assessment, and Significant Factors

 

Permits, licences, and approvals that have currently been granted to NFG include Exploration Approvals, a Water Use Licence, Section 39 Permits for operating in a Protected Public Water Supply Area, a Section 49 Permit to Alter a Water Body, a Quarry Permit, and other environmental and operating permits.

 

NFG conducted a Historic Resources Impact Assessment in 2023 that determined areas with 1) temporal caribou exploration restrictions, 2) known archaeological site buffer zones, 3) low potential for archaeological resources, and 4) zones where no further investigation or mitigation measures are required.

 

NFG has contracted ongoing environmental baseline studies since 2020 that include groundwater, surface water and sediment sampling, as well as terrestrial and aquatic assessments. A geotechnical and hydrogeological study and baseline air quality monitoring were initiated in 2023.

 

To the best of the Qualified Person’s knowledge and other than the constraints cited in this report, there are no other environmental liabilities, significant factors or risks that may affect access, or the right or ability of NFG to perform exploration work, on the Queensway Property.

 

1.7 Geology and Mineralization

 

The tectonostratigraphic setting of the Queensway Property occurs within the Dunnage (mainly Exploits Subzone) and Gander zones of the Newfoundland Appalachian orogen. A poly-deformed fold and thrust belt that overprints Ordovician ophiolitic and marine carbonate/siliciclastic rocks, Silurian shallow marine/ terrestrial sequences, and Silurian magmatic rocks. The bedrock geology is comprised of Middle Ordovician sedimentary rocks of the Outflow and Hunt’s Cove formations (Davidsville Group) and the Main Point Formation (Hamilton Sound Group).

 

Gold prospects within the Queensway area are mostly concentrated along the Appleton Fault Zone and the Joe Batt’s Pond Fault Zone, two major fault zones that run southwest-to-northeast through the project area. Second-order brittle faults such as the Keats-Baseline Fault Zone are also known to host gold mineralization.

 

Gold at the Queensway Property typically occurs as coarse grains of free visible gold in quartz-carbonate veins that are brecciated, massive-vuggy, laminated, or have a closely spaced stockwork texture. High-grade gold mineralization, above 10 ppm Au, typically has a strong correlation between gold and quartz-carbonate veins associated with complex networks of brittle fault zones aligned with regional deformation zones. High-grade gold mineralization has not been observed outside of the main vein arrays.

1 November 2024

  3 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Gold mineralization is often associated with arsenic-bearing accessory minerals, in addition to antimony and tungsten. An alteration halo around most of the gold-rich veins is associated with the changes in the mineralogy of white mica.

 

1.8 Historical Exploration

 

Historical mineral exploration has occurred in the Queensway Property area since the 1950s with early focus on base metals through to the 1970s. This shifted to gold with the discovery of the gold prospect at Jonathan’s Pond in the early 1980s. From the 1980s through the mid-2010s, dozens of prospectors and companies conducted exploration programs that included prospecting and rock sampling, geological mapping, surface sampling of till, soil, stream sediment and lake sediment, trenching and channel sampling, geophysics, and drilling. Several gold prospects were discovered in the Queensway area because of these historical exploration programs.

 

By 2012, 14 different companies had drilled 246 holes with a total of 29,593 m of drill core on NFG’s Queensway North and Queensway South blocks, and north, south, and west of Gander Lake. The historical exploration campaigns in the Queensway Property area provide ample indications of gold mineralization, with gold grades above 100 ppm in mineralized boulders, till samples, and drillhole intercepts. Fourteen and 25 historical gold prospects were discovered in NFG’s Queensway South and Queensway North blocks, respectively. The historical exploration generally occurred along and adjacent to the two linear mineralized trends associated with the Appleton Fault Zone and the Joe Batt’s Pond Fault Zone.

 

Historical work completed by Labrador Gold Corp. consists of geological mapping, prospecting, and geochemical sampling of rock (2,512 samples), soils (12,145 samples), and till (535 samples). Gold in bedrock sampling led to the discovery of four occurrences, Big Vein, Golden Glove, Knobby, and HM. Geophysical surveys conducted on the Property included numerous ground geophysical surveys. Since 2020, Labrador Gold Corp. conducted diamond drilling (341 holes totaling 91,420 m), rotary air blasting (154 holes totaling 8,382 m), and reverse circulation (6 holes totaling 434 m) at the Big Vein, Doyle Zone-Pristine, Midway, Dropkick, Golden Glove, Knobby, Peter Easton, CSAMT and HM prospects, and to test geochemical gold anomalies in areas with no bedrock exposure. The Big Vein-Big Vein Southwest, Doyle Zone, and Dropkick zone occur in proximity to the Appleton Fault Zone and show similar gold mineralization, geological, alteration, and structural characteristics.

 

1.9 New Found Gold Corp. Ground Exploration

 

NFG has conducted exploration activities at the Queensway Property between 2016 and 2024 that include prospecting and rock sampling, soil sampling, till sampling, trenching and channel sampling, and diamond drilling programs. Ground geochemical work within the boundaries of the Property has resulted in the collection of 1,250 till samples, 27,518 soil samples, 9,019 rock samples, and 3,352 trench channel samples. The samples were analyzed for gold at commercial, independent, and accredited laboratories. Over 80% of the samples have been assayed (some results are pending). Current surface exploration analytical result highlights include:

1 November 2024

  4 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Most rock samples assay below 1 ppm Au. At Queensway North, 3.1% of the samples assayed between 1 and 30 ppm Au, and 0.37% had between 30 and 1,131 ppm Au (highest value from the Big Dave prospect along the Appleton Fault Zone). At Queensway South, 3.57% yielded between 1 and 30 ppm Au, and 0.11% had between 30 and 479 ppm Au (the highest value from float sample at the Camp prospect). Five per cent of the rock samples collected from Twin Ponds, Little Rocky Brook, and Bellman’s Pond assayed between 1.22 and 15.79 ppm Au.

 

Most till samples assayed below 1 ppm Au. The highest gold analytical values (>30 ppm Au) were from till samples collected within the Queensway North and Queensway South blocks.

 

Soil sample grids have been used to define areas of elevated gold and other elements in soil. Most soil samples have between 0.00005 and 0.947 ppm Au (over 99%). Four soil samples yielded over 1 ppm Au to a maximum of 2.27 ppm Au.

 

Most trench channel samples assayed below 1 ppm Au. Previous highlights from the Queensway North block include 18.9 ppm Au at the K2 prospect, and 4 samples from the Glass prospect trenches yielded over 11 ppm Au and up to 14.6 ppm Au. In the Queensway South block, the Paul’s Pond prospect trenches yielded samples with 51.5 and 42.4 ppm Au.

 

During August to November 2023, NFG undertook a major excavation effort at the Keats trench where the Company removed overburden to expose a 200 m long by 70 m wide area that roughly corresponds to the known surface expression of the high-grade segment of the Keats-Baseline Fault Zone. An ongoing detailed mapping and channel sampling program is being conducted by NFG, with current results from the channel sampling returning several intercepts of gold mineralization, including one sample of 1,808 ppm Au over 0.98 m. Additional assay results are still pending.

 

With respect to geophysical survey work, during 2023 and 2024, NFG completed,

 

A geophysical integration study in the Paul’s Pond prospect area involving the collection and interpretation of two joint magnetics and VLF-EM surveys that highlighted a large magnetized lithological unit and various conductive southwest-northeast trending lineation’s stretching the extent of the area thought to be lithological contacts or faults.

1 November 2024

  5 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

A 3D seismic survey covering a 46 square-km block (5.8 km by 8.0 km) along the larger extent of the Appleton and Joe Batt’s Pond fault zones in the Queensway North block. Detailed interpretive work is ongoing.

 

A drone-based magnetics survey over the Greenwood and Bernards Pond areas, covering roughly 1,470 line-km that provides a lithological and structural foundation of a large portion of Queensway South block.

 

Based on data from surface reconnaissance and mapping studies, surface till and grab rock prospecting samples, trench channel rock samples, and geophysical surveys, NFG has identified several mineralized prospects along the Appleton Fault Zone and the Joe Batt’s Pond Fault Zone in the Queensway North and Queensway South blocks.

 

1.10 New Found Gold Corp. Drilling Update

 

To the Effective Date of this report, NFG has completed a total of 2,388 diamond drillholes for a total of 593,000 m at the Queensway Property and assayed a total of 501,891 samples from 2,354 drillholes at independent laboratories. Assay results for the remaining 29 drillholes are pending.

 

Since NFG’s previous technical report, NFG has either discovered-by-drilling, or drill-advanced, the following gold prospects:

 

Queensway North Prospect Drilling Updates: Dome, Everest, Golden Joint, Honeypot, Iceberg, Iceberg Alley, Jackpot, Keats South, Keats West, Lotto North, Monte Carlo, and Road.
Queensway North Drilling Discoveries: Big Vein, Golden Dome, and Pistachio

 

NFG’s most significant gold intercepts in the Queensway Project occur along the northern part of the Appleton Fault Zone within the Queensway North block where drilling has identified numerous gold zones that collectively include the Keats, Keats North, Cokes, Iceberg, Iceberg East, Iceberg Alley, Keats West, Road, Golden Joint, Powerline, Dome, Lotto, Monte Carlo, Lotto North, K2, Jackpot, Honeypot, Everest, Knob, Grouse, and Trans-Canada Highway prospects. The fault zone exploits the contact between a black shale interbedded with grey siltstone and greywacke in the west and a sequence of interbedded shale and greywacke in the east. Mineralization is also hosted in a network of brittle faults adjacent to the Appleton Fault Zone and crosscutting the northeast-striking stratigraphy.

 

While significant untested gaps still exist, NFG has defined a 6 km long mineralized strike area along the Appleton Fault Zone within the Queensway North block called the Appleton Fault Zone Mineralized Envelope. Mineralized zones within this mineralized envelope have been discovered on the east and west sides of the Appleton Fault Zone. The fault damage zone has an apparent width extent of 400 m, or 200 m on each side of the Appleton Fault Zone, and in certain places extends 500 m outward from the fault. In addition, gold prospects are defined to occur along offshoot faults associated with the Appleton Fault Zone. For example, the Keats, Iceberg, and Iceberg East prospects are associated with the Keats-Baseline Fault Zone, which splays outward in a northeast direction from the Appleton Fault Zone. Ongoing through 2024, the Company has been conducting a deep drilling program testing the Keats Baseline Fault Zone - Appleton Fault Zone structural corridor. NFG also commenced drilling within the newly acquired Labrador Gold Corp.’s Kingsway project.

1 November 2024

  6 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

NFG exploration in the northern part of the Joe Batt’s Pond Fault Zone in the Queensway North block, has established 10 prospects, 5 of which have been drilled by NFG. Gold mineralization is hosted in ductile-to-brittle deformation zones and associated irregular vein arrays that run parallel to the southwest-striking, steeply northwest-dipping stratigraphy.

 

NFG has located a series of gold prospects along the Appleton Fault Zone in the Queensway South block that include 1) mineralized shear zones with gold associated with quartz veining and accessory sulphide minerals in greywacke and siltstone that is locally analogous to the gold discoveries made along the northern portion of the Appleton Fault Zone (e.g., Nebula, Devil’s Trench, Devils Pond South, Camp), 2) gold hosted in siltstone that is intruded by a swarm of gabbroic dykes that has not been recognized at Queensway North (e.g., Astronaut, Nova, Goose), and 3) epithermal fault zone gold mineralization defined sinter and hydrothermal breccia (e.g., Aztec).

 

1.11 Metallurgical Test Results

 

Metallurgical test work performed for the Queensway Gold Project includes a Phase 1 evaluation of the Keats, Golden Joint, and Lotto mineralized zones, and Phase 2 test of the Iceberg and Iceberg East mineralized zones. Four Master Composites (Keats 1, Keats 2, Lotto, and Iceberg) were assembled using 148 Variability Composites generated from approximately 1,350 m of drill core with a combined weight of 4,800 kg. A Master Composite was not prepared from the Golden Joint Variability Composites due to the lack of sufficient mass for testing.

 

The tested mineralized zones contain significant free-milling gold that is amenable to both gravity and leach extraction. Free gold grains greater than 150 microns in size were observed predominantly in the quartz veins located throughout the tested zones. Positive gold extraction percentages were achieved using gravity separation and conventional carbon-in-leach technologies. The Variability Composite samples (n=162) were subjected to gravity gold extraction at a target grind of 212 µm, gravity tails were reground to target grinds of 75 µm and 37 µm, then treated by carbon-in-leach for 24 hours. The average gold weighted extraction percentage from the mineralized zones ranged between 90.0% and 96.9% when reduced to a product size of 75 µm. Lower gold extraction values were realized for individual Variability Composite samples that had gold head assay values of less than 2 grams per tonne.

1 November 2024

  7 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Comminution test work indicated that the tested material had an SMC breakage test to determine A x b index values of between 59.4 and 65.9 (average 63%) and a Bond Work Index of between 16.2 and 18.3 kWh/t (average 18 kWh/t).

 

The test work demonstrates that conventional gravity separation and CIL are well-suited extraction methods for gold mineralization of the prospects tested to date at the Queensway Gold Project. The results of the comminution test work indicate that the mineralized material would be amenable to a conventional SAG/Ball milling circuit and would have moderate grinding requirements in a secondary ball mill.

 

Risk analysis associated with the metallurgical testing did not identify any areas of high risk. Additional flowsheet development work is ongoing to determine if marginal improvements in gold extraction can be achieved.

 

1.12 Conclusions and Uncertainties

 

NFG has completed a significant amount of exploration at the Company’s Queensway Gold Project. Utilizing information from historical and NFG-conducted exploration programs, NFG has identified numerous gold prospects along the Appleton Fault Zone and the Joe Batt’s Pond Fault Zone. The prospects occur within both the Queensway North and Queensway South block along a strike length of approximately 100 km and are associated with regional-scaled Appleton and Joe Batt’s Pond fault zones. NFG exploration has delineated two distinct segments of high-grade gold mineralization in Queensway North within the fault zones that include:

 

A semi-contiguous network of high-grade gold veins and related faults is drill-defined to occur along a 6 km segment of the Appleton Fault Zone between the Grouse and Everest gold prospects in the Queensway North block. The high-grade gold trend is supported by the 1) style of mineralization, or high gold grades in quartz-carbonate veins at various prospects along the trend, 2) structural associations defined by complex networks of brittle fault zones aligned with regional deformation zones, 3) recognition and correlation of unique veins and vein systems, 4) association between gold and accompanying gangue (arsenopyrite, lead-antimony sulfosalt) and alteration minerals (aluminum-rich NH4 white muscovite), and 5) consistently hosted in Davidsville Group sediments that form the hanging wall and footwall to the Appleton Fault Zone.

 

A possible 3.7 km segment of high-grade gold occurrences within the Joe Batt’s Pond Fault Zone between the south end of the Pocket Pond prospect and the north end of the 1744 prospect in the Queensway North block. This trend of high-grade mineralization is less well defined in comparison to the Grouse to Everest Appleton Fault Zone trend. The high-grade trend is supported by till and soil geochemical anomalies between the two drill-tested prospects, and by a uniquely different style of mineralization in that the gold mineralization associated with the Joe Batt’s Pond Fault Zone typically follows the orientation of the stratigraphy.

1 November 2024

  8 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Most of the prospects associated with the high-grade gold segments in the Queensway North block remain open at depth and warrant further drilling to determine their down-dip extent and to refine understanding of local details of orientation. Interpretations from 3-D seismic data have generated deep targets along the Keats-Baseline Fault Zone and Appleton Fault Zone structural corridor, which are currently being tested by NFG’s deep drilling program.

 

Surface work, geophysical interpretations and targeting is ongoing in the Queensway South block by NFG, with an inaugural drill program initiated in 2022 and followed up in 2023. A total of 89 drillholes totaling 19,059 m have been drilled at QWS through to the Effective Date of this technical report, targeting several showings that straddle the Appleton Fault Zone. NFG exploration has made several new discoveries including Astronaut and Nebula that form part of a gold trend located west of the Appleton Fault Zone with an indicated strike length of 1.6 km. This mineralized trend occurs in the Paul’s Pond area, a region known for its high concentration of gold anomalies exhibiting a similar spatial relationship to the Appleton Fault Zone as seen at Queensway North. A second gold mineralized trend situated east of the Appleton Fault Zone is developing based on ongoing exploration that spans over 12 km of strike from the Devils’ Trench south through Nebula, Camp and Devils Pond South prospects.

 

NFG’s studies indicate that gold mineralization throughout the Queensway Project area is hosted in quartz vein-filled brittle fault networks adjacent to regional deformation zones that reach deep into the crust.

 

In May 2022, NFG initiated a trial of the Chrysos PhotonAssayTM non-destructive method for gold analysis at MSALABS in Val-d’Or, QC, in conjunction with follow-on screen metallic fire assay or standard 30-g fire assay method at ALS Canada Ltd. in Vancouver, BC for assay comparison. The results from the trial program demonstrated that the methods agree well, and the Company, its consultants, and the Qualified Person concludes that the PhotonAssayTM method is appropriate for Queensway samples. Beginning May 2022, NFG only submitted core samples for gold determination to ALS and MSALABS. Since June 2024, NFG only submits core samples for photon gold determination to ALS.

 

It is the Qualified Person’s opinion that the exploration work conducted by NFG at the Queensway Property is reasonable and within the standard practices of gold evaluation within the Dunnage Zone of central Newfoundland. NFG exploration work results provide a significant update to the geology and mineral potential of central Newfoundland and the Qualified Person advocates that the information and data presented in this technical report forms a robust database for future exploration, and potentially, mineral resource estimation studies, at the Queensway Property.

 

Potential risks and uncertainties toward the advancement of NFG’s Queensway Project include:

1 November 2024

  9 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

NFG mineral rights ownership of licences 035047M and 035197M, 035048M and 035198M, and 035050M are subject to the successful completion of the conditions within a single Option Agreement; hence, there is some uncertainty to completion of the conditions and subsequent acquisition but currently do not cover any known gold prospects within the licences.

 

Although NFG’s exploration work is defining broad zones of mineralization, the gold mineralization can be erratic over short distances, which creates difficulties in building local vein network and gold mineralization models.

 

A risk assessment associated with the Phase 1 metallurgical testing program identified low risk for the full effect of preg-rob materials in the mineralized zones, optimization of reagent consumptions, and overestimation of gravity gold extraction, and medium risk for comminution characteristics. These risks will be re-evaluated and investigated further as part of future metallurgical test work.

 

Ultimately, there is a risk that the scalability of initial laboratory-based mineral processing/metallurgical test work may not translate to a full-scale commercial operation.

 

NFG will attempt to reduce risk/uncertainty through effective project management, engaging technical experts and developing contingency plans. To the best of the Qualified Person’s knowledge, there are no environmental liabilities, significant factors or risks that may affect access, title, or the right or ability of NFG to perform exploration work on the Queensway Property.

 

1.13 Recommendations

 

A two-phase work program is recommended with an estimated total cost of CDN$72.1 million with a 10% contingency. A summary of the program with cost estimates is presented in Table 1.1.

 

Phase 1 work recommendations are estimated to cost CDN$36.7 million with a 10% contingency, and include 1) geophysical surveys in the Queensway North and Queensway South blocks, 2) surface exploration work including exploratory work and advanced trench rock sampling in the Queensway North and Queensway South blocks, 3) a Phase 1 drill program that consists of step-out and infill drilling to further define and delineate the gold mineralization at known prospects in the Queensway North and Queensway South block, target delineation drilling at the Queensway South, VOA, and Twin Ponds blocks to follow-up on recent exploration programs that yielded favourable geological interpretations, and exploratory drilling along the Appleton and Joe Batt’s Pond fault zones to test targets identified through surface exploration work programs, and 4) ongoing metallurgical test work to evaluate reagent consumptions, comminution characteristics, and gravity gold recovery.

1 November 2024

  10 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Advancement to the Phase 2 work recommendations is contingent on the positive results of the Phase 1 work programs. The Phase 2 work program is estimated to cost approximately CDN$35.4 million with a 10% contingency, and includes 1) diamond drilling for infill, step-out, and exploration drilling in conjunction with the initiation of Reverse Circulation drilling to expedite core production rates for metallurgical test work, 2) advanced metallurgical test work with flowsheet optimization studies, 3) continue with environmental baseline and community consultation, and initiate marketing and possible mine planning studies in consideration of Modifying Factors, and 4) maiden mineral resource estimate technical reporting that is prepared in accordance with Canadian Institute of Mining, Metallurgy and Petroleum definition standards and best practice guidelines (2014, 2019) and National Instrument 43-101.

 

 

1 November 2024

  11 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 1.1 Future work recommendations.

 

 

1 November 2024

  12 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

2 Introduction

 

2.1 Issuer and Purpose

 

This technical report has been prepared for the Issuer, New Found Gold Corp. (NFG or the Company) a publicly traded junior mineral exploration company based in Vancouver, BC, Canada. The focus of this technical report is on NFG’s Queensway Gold Project (the Project or the Property) located in northeast Newfoundland of the Canadian province Newfoundland and Labrador (NL; Figure 2.1). The Queensway Property located on the Trans-Canada highway 15km west of Gander, Newfoundland.

 

Since NFGs previous report, NFG has acquired 1) 100% interest in Labrador Gold Corp.’s (LabGold) Kingsway Project including 4 licences (311 claims), and 2) 100% interest in 3 licences (54 claims) from Sky Gold Corp. (Sky Gold). The Queensway Property currently comprises 7,024 claims within 103 mineral licences and encompasses an area of 175,600 ha. In addition, NFG has completed new diamond drilling at the Big Vein, Dome, Dropkick, Everest, Golden Dome, Golden Glove, Golden Joint, Green Mantle, Honeypot, Iceberg, Iceberg Alley, Jackpot, Keats South, Keats West, Knobby, Lotto North, Monte Carlo, Road, Pistachio and Pristine prospects.

 

The intent of this report, therefore, is to provide a technical update on NFG’s current Queensway Gold Project expanded land position and new exploration activities at the Queensway Property through to an Effective Date of 1 November 2024.

 

This technical report has been prepared in accordance with the Canadian Institute of Mining, Metallurgy and Petroleum (CIM) Mineral Exploration Best Practice Guidelines (2018) and the Canadian Securities Administration’s (CSA) National Instrument 43-101 (NI 43-101) Standards of Disclosure for Mineral Projects.

 

2.2 Author and Site Inspection

 

This technical report has been prepared by 1) Mr. Roy Eccles P. Geol. P. Geo. of APEX Geoscience Ltd. in Edmonton, AB, 2) Mr. Mark Jorgenson QP Metallurgy of Jorgensen Engineering and Technical Services, LLC in Centennial, CO, and 3) Mr. Gary Simmons QP Metallurgy of GL Simmons Consulting, LLC in Larkspur, CO. The authors are Qualified Persons (QPs) as defined in NI 43-101 and are independent of NFG and the NFGs Queensway Property.

 

Apart from Section 13, Mr. Eccles takes responsibility for all report items; Mr. Jorgenson and Mr. Simmons take responsibility for the mineral processing test work conducted on representative rock material from the Queensway Gold Project as presented in Section 13.

1 November 2024

  13 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 2.1 General location of New Found Gold Corp.’s Queensway Gold Project in Newfoundland, Newfoundland and Labrador, Canada.

 

 

 

1 November 2024

  14 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Mr. Eccles is a Professional Geologist registered with the Alberta Association of Professional Geologists and Geophysicists (APEGA; Membership Number 74150) and the Professional Engineers and Geoscientists Newfoundland and Labrador (PEGNL; Membership Number 08287) and has worked as a geologist for more than 35 years since his graduation from university. He has been involved in all aspects of mineral exploration, mineral research, and mineral resource estimations for metallic, industrial, and specialty mineral projects and deposits. Specific experience includes Caledonian Orogeny gold mineralization projects in the Dunnage Zone of Newfoundland and Scotland.

 

Mr. Jorgensen is a Qualified Professional with the Mining and Metallurgical Society of America (MMSA; Member Number 01202QP) and has worked as a metallurgist for more than 40 years since his graduation from university. He has designed, constructed, and operated gold processing facilities and has extensive experience in comminution, gravity gold concentration, and cyanide leaching.

 

Mr. Simmons is Qualified Professional with the MMSA (Member Number 01013QP) and a Registered Member of the Society for Mining, Metallurgy and Exploration (SME; Member ID 2959300) and has worked as a metallurgist for more than 50 years since his graduation from university. He has operated gold leaching plants and designed test work programs for several gold properties.

 

All 3 authors have completed Qualified Person site inspections at the Queensway Property: Most recently, Mr. Eccles on January 12-13, 2023, Mr. Simmons on October 19, 2023, and Mr. Jorgensen on November 29, 2023. The site inspections enabled the Qualified Persons to 1) observe the overall geological setting of the Queensway Property, 2) understand and observe the exploration work conducted by NFG including active diamond drilling, 3) independently validate the gold mineralization that is the subject of this technical report, and 4) collect and understand the nature of core material for metallurgical test work.

 

2.3 Sources of Information

 

The QP, in writing this technical report, used sources of information as listed in Section 27, References.

 

The author relies on the information reported in previous technical reports that include an NFG report prepared by R. Mohan Srivastava of RedDot3D Inc. (Srivastava, 2022) and a LabGold report prepared by T.A. Tettelaar (Tettelaar, 2024).

 

The exploration information and data on which this report is based were provided by NFG. Most figure and table information were prepared by the QP and NFG; others were sourced from technical literature and public sources as referenced.

 

Publicly available information and data include miscellaneous reports, assessment reports, government data, scientific papers, and NFG News Releases (e.g., Kennedy and McGonigal, 1972; Williams, 1972; Blackwood, 1982; Karlstrom et al., 1982; Ermer, 1986; Williams et al., 1988; Williams et al., 1993; Sheppard, 1994; Currie, 1995; Williams, 1995; Harper et al., 1996; Williams, 2004; Dubé and Gosselin, 2007; Pollock et al., 2007; Willman, 2007; Labonte and Piercey, 2012; Piercey et al., 2014; Goldfarb et al., 2015; CGG Canada Services, 2017-2021; Holmes and Michaud, 2017; Robert et al., 2021; Sterk and Kruse, 2021; Srivastava, 2022; New Found Gold Corp. 2020a-e, 2021a-s, 2022a-x, 2023d-r, 2024a-i).

1 November 2024

  15 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

The QP has reviewed NFG datasets and compilation data, public government and scientific journal reports, Srivastava (2022), company assessment reports, and Company press releases and considers the articles and datasets contain relevant and reasonable geological information in relation to the Queensway Property. The government and journal information and manuscripts were prepared by geologists and engineers that are either professional or have advanced university degrees. Industry assessment reports were vetted by government employees.

 

Based on the QP review of these documents and data, the QP has deemed that the reports, information, and data, to the best of his knowledge, are valid contributions to this technical report, and therefore takes ownership of the ideas as they pertain to the technical report.

 

NFG uses, or has used, numerous laboratories: Eastern Analytical Ltd. in Springdale, NL, ALS Canada Ltd. in Vancouver, BC (and sample preparation laboratories in NB, ON, and MB), Activation Laboratories Ltd. in Ancaster, ON, SGS Canada Inc. in Burnaby, BC, Overburden Drilling Management in Nepean, ON, and MSALABS in Val-d’Or, QC and Timmins, ON. These labs are independent of NFG and represent major commercial, accredited Canadian labs.

 

With respect to the Queensway Property mineral licences documented in Section 4, the legal information regarding mineral licences and claims has not been independently verified; however, the QP has reviewed the Queensway Property licence status from the Government of Newfoundland and Labrador Mineral Rights Inquiry Portal (https://licensing.gov.nl.ca/mrinquiry/sfjsp?interviewID=MRISearch) and the “Map Staked Claims” GIS file from the Government of Newfoundland and Labrador Geoscience Atlas (https://geoatlas.gov.nl.ca).

 

The 103 mineral licences that constitute the Queensway Gold Property are active and in good standing as of the Effective Date of this technical report.

 

2.4 Units of Measure

 

With respect to units of measure, unless otherwise stated, this Technical Report uses:

 

Abbreviated shorthand consistent with the International System of Units (International Bureau of Weights and Measures, 2006).

1 November 2024

  16 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

‘Bulk’ weight is presented in both United States short tons (tons; 2,000 lbs or 907.2 kg) and metric tonnes (tonnes; 1,000 kg or 2,204.6 lbs.).

 

Geographic coordinates are projected in the Universal Transverse Mercator (UTM) system relative to Zone 21N of the North American Datum 1983 (NAD83).

 

Currency in Canadian dollars (CDN$), unless otherwise specified.

 

1 November 2024

  17 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

3 Reliance of Other Experts

 

The QP for this report is not qualified to give legal opinions. On legal matters, the QP relies on information provided by the Issuer, NFG, specifically, the QP does not have the legal expertise to validate the Option Agreements and royalties described in Sections 4.5 and 4.6. The successful completion of 9 previous Option Agreements were not formally disclosed by NFG because the Issuer was a privately owned corporation to August 2020. At present, 7.8% of the Queensway Property claims are currently owned by other licence holders and are the subject of a single Option Agreement between NFG and various mineral right Optionor’s that is subject to annual payments and common shares.

 

Hence, the QP relies entirely on Option Agreement and royalty information disclosed by NFG (New Found Gold Corp., 2022a) and in the numerous documents provided by NFG management to the QP during the preparation of this technical report in January 2023. The title and dates of specific Option Agreement and/or confirmation of property transfer reports provided by NFG to the QP include, in no order:

 

Confirmation of Transfer - Kriask Syndicate (June 23, 2020).
Termination of the JBP Property Agreement (September 10, 2015).
Linear and JBP Mining Option Agreement (July 15, 2016).
Unity Project Mining Option Agreement (November 9, 2016).
Noreen Kennedy Mining Option Agreement (October 4, 2016).
Golden Bullet Project Mining Option Agreement (November 11, 2016).
Blackmore Mining Claim Acquisition Agreement (December 5, 2016).
Guinchard Claims Mining Option Agreement (April 28, 2017).
JBP Linear Project Mining Option Agreement (May 27, 2017).
Quinlan Amending Agreement to Purchase Property Agreement (May 27, 2019).
P-Pond Project Mining Option Agreement (May 30, 2017).
Mineral Licence 06821M Mining Claim Purchase Agreement (September 7, 2018).
Finally, the only current Option Agreement, which is between NFG and Aidan O’Neil, Suraj Amarnani, Josh Vann, and VOA Exploration Inc. (November 2, 2022).

 

The title and dates of specific investment agreements provided by NFG to the QP include:

 

GoldSpot Discoveries Inc. and NFG Investment Agreement (January 29, 2019).
GoldSpot Discoveries Inc. and NFG Amendment to Investment Agreement (August 2, 2020).
Allan Keats and NFG Royalty Purchase Agreement (November 9, 2021).
Kevin Keats and NFG Royalty Purchase Agreement (November 9, 2021).
Krinor Resources Inc. and NFG Royalty Purchase Agreement (November 9, 2021).
Property Purchase Agreement between New Found Gold Corp. and Labrador Gold Corp. (April 21, 2024).

1 November 2024

  18 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Property Purchase Agreement between New Found Gold Corp. and Sky Gold Corp. (May 17, 2024).

 

Finally, an NFG Title Opinion related to NFG’s mineral licences, which was prepared by Stewart McKelvey and dated December 14, 2022, was provided by NFG to the QP.

 

1 November 2024

  19 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

4 Property Description and Location

 

4.1 Description and Location

 

The Queensway Gold Project is on the northeast portion of the Island of Newfoundland in the Province of Newfoundland and Labrador along the east coast of Canada. The northern portion of the Property is transected by the Trans-Canada Highway, a transcontinental federal-provincial highway system that travels through all 10 southern provinces of Canada. Via the Trans-Canada Highway, the eastern edge of the Property is located approximately 15 km west of the Town of Gander, NL (Figure 2.1). The approximate centre of the NFG Queensway Project is UTM, Zone 21N, NAD83: 645000 m Easting, 5402000 m Northing.

 

On July 9, 2024, NFG announced the Company had acquired 100% interest in Labrador Gold Corp.’s (LabGold) Kingsway Project including 4 licences (311 claims).

 

On May 17, 2024, NFG completed the acquisition of 100% in 3 licences (54 claims) from Sky Gold Corp. (Sky Gold).

 

Currently, the Queensway Property is defined by 103 mineral licences that comprise 7,024 claims, with each claim having an area of 25 ha (500 m x 500 m). In total, the Property encompasses an area of 175,600 ha (1,756 km2). The licences can be separated spatially into groups, or blocks, based on their contiguous groupings as described in the text that follows.

 

The geographic position of the various contiguous licence groupings, and the licence descriptions, are presented in Figure 4.1 and Table 4.1. The licences/claims are divided into 6 sub-properties, or blocks that include:

 

2 large contiguous blocks (Queensway North or QWN, and Queensway South or QWS) separated by Gander Lake, and

 

4 smaller blocks of single or multiple contiguous groups of licences (Twin Ponds, Ten Mile-Duder Lake, Bellman’s Pond, and Little Rocky Brook).

 

The blocks have no specific administrative or legal significance but are helpful in presenting and explaining a variety of exploration activities over a very large area.

 

The larger QWN and QWS blocks are defined as follows:

 

1. Queensway North (QWN) consists of 43 contiguous mineral licences (1,135 claims) and is situated north of Gander Lake. The recent acquisition of 5 licences (315 claims) from LabGold (n=4 licences) and Sky Gold (n=1 licence) are spatially and contiguously associated with QWN. Currently, the QWN block encompasses a total area of 28,375 ha. The approximate centre of the QWN block is UTM, Zone 21N, NAD83: 663470 m Easting, 5433890 m Northing (Table 4.1; Figure 4.2). Two licences within the QWN Block forms part of the VOA Option (licences 035197M and 035198M; see Section 4.5).

1 November 2024

  20 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

2. Queensway South (QWS) consists of 53 contiguous mineral licences (5,337 claims) and is situated south and west of Gander Lake. The recent acquisition of 2 licences (50 claims) from Sky Gold are spatially and contiguously associated with QWS. Currently, QWS encompasses a total area of 133,425 ha. The approximate centre of the QWN block is UTM, Zone 21N, NAD83: 639028 m Easting, 5389980 m Northing (Table 4.1; Figure 4.3). None of the VOA Option licences occur within the QWS Block.

 

The Queensway Property also includes 4 smaller, non-contiguous groups of licences that occur north and west of the QWN block (Figure 4.2; Table 4.1). These blocks are defined as follows:

 

1. Twin Ponds (TP) block consists of 3 contiguous mineral licences (226 claims) and is situated west of the Gander River. The TP block encompasses an area of 5,650 ha. The approximate centre of the TP block is UTM, Zone 21N, NAD83: 653000 m Easting, 5436500 m Northing. A single licence within the TP Block forms part of the VOA Option (licence 035048M; see Section 4.5).

 

2. Ten Mile-Duder Lake (TMDL) block consists of 2 contiguous mineral licences (211 claims) situated west of the Gander River. The TMDL block encompasses an area of 5,275 ha. The approximate centre of the TMDL block is UTM, Zone 21N, NAD83: 670000 m Easting, 5460000 m Northing. Both licences within the TMDL Block form the VOA Option (licence 035047M and 035050M; see Section 4.5).

 

3. Bellman’s Pond (BP) block consists of 1 mineral licence (1 claim) and is situated west of the Gander River. The BP block encompasses an area of 25 ha. The approximate centre of the BP block is UTM, Zone 21N, NAD83: 671800 m Easting, 5450000 m Northing. None of the VOA Option licences occur within the BP Block.

 

4. Little Rocky Brook (LRB) block, which consists of 1 mineral licence (114 contiguous claims) and is situated west of the Gander River. The LRB block encompasses an area of 2,850 ha. The approximate centre of the LRB block is UTM, Zone 21N, NAD83: 6767000 m Easting, 5447500 m Northing. None of the VOA Option licences occur within the LRB Block.

1 November 2024

  21 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 4.1 Queensway Project and five contiguously-defined sub-property ‘blocks’, which are composed of contiguous mineral licences. The VOA Option Agreement Licences are outlined in black.

 

1 November 2024

  22 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 4.1 Queensway Project mineral licence description and status (reported by blocks of contiguous licences/claims). The VOA Option Agreement Licences, Labrador Gold Corp., and Sky Gold Corp. licences are highlighted in grey, glue, and green.

 

 

1 November 2024

  23 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Table 4.1 continued.

 

1 November 2024

  24 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Table 4.1 continued. The VOA Option Agreement Licences are highlighted in grey.

 

 

1 November 2024

  25 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 4.2 Queensway North mineral licences, and the separate licences of Twin Ponds, Ten Mile-Duder Lake, Bellman’s Pond, and Little Rocky Brook. The VOA Option Agreement Licences are outlined in black.

 

 

1 November 2024

  26 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 4.3 Queensway South mineral licences.

 

 

1 November 2024

  27 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

4.2 Property Ownership Summary

 

Since the 1950s, the Queensway Property area has been prospected by several dozen individuals who have staked claims either in their own name or in the name of the private company through which they conduct their prospecting activities. The Queensway Property claims have been optioned at various times to larger mining companies, many of them public. Private and public companies have worked together in joint ventures and with separate groups of individual prospectors, dropped options and entered into new joint ventures and option agreements, sometimes with the same partners and sometimes with new partners.

 

Following the many changes in claim ownership, Palisade Resources Corp, later renamed to New Found Gold Corp in June 2017, began to consolidate the large land package that now forms the Queensway Project.

 

The licences were acquired through 1) online map staking with the Government of NL, 2) the successful completion of a series of Option Agreements (9 Option Agreements; New Found Gold Corp, pers. comm., 2023), and 3) some of the licences were originally acquired by Palisade Resources Corp, who was renamed to NFG in June 2017.

 

On July 9, 2024, NFG acquired 100% interest in LabGold’s Kingsway Project. Pursuant to the acquisition, NFG issued to LabGold 5,263,157 common shares as consideration for the Purchased Assets (New Found Gold Corp., 2024j).

 

On May 17, 2024, NFG acquired 100% interest in 3 mineral licences previously held by Sky Gold. Pursuant to the acquisition, NFG purchased the licences for $35,000.

 

In addition, 5 licences are currently owned by separate licence holders and are subject to NFG satisfying conditions of a single Option Agreement called the VOA Option (Figure 4.1; see Section 4.5).

 

With respect to the nature and extent of NFG’s mineral rights interest at the Queensway Property, Table 4.1 shows that the Queensway Property can be separated into 4 general groups based solely on the title of the Licence Holder. Figure 4.2 and Table 4.1 describe the Queensway North groups that includes titles related to Twin Ponds, Ten Mile-Duder Lake, Bellman’s Pond, and Little Rocky Brook. Figure 4.3 and Table 4.1 describe the title holder for the Queensway South block.

 

A total of 7.8% of the claims that make up the Queensway Property are not owned by NFG but rather by separate licence holders and are subject to a single Option Agreement - the VOA Option - between NFG and the current property owners (Aidan O’Neil, Suraj Amarnani, and Josh Vann). The descriptions of the 4 groups - based on the title of the Licence Holder is further summarized as follows:

1 November 2024

  28 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

92.2% of the claims that make up the Queensway Property are fully owned by NFG. They consist of 6,473 claims within 98 mineral licences in Queensway North, Queensway South, Twin Ponds, Bellman’s Pond, and Little Rocky Brook.

 

4.83% of the claims as part of the VOA Option owned by Aidan O’Neil. They consist of 339 claims within 2 mineral licences at Ten Mile-Duder Lake and Queensway North.

 

2.99% of the claims as part of the VOA Option owned by Suraj Amarnani. They consist of 210 claims within 2 mineral licences at Twin Ponds and Queensway North.

 

0.03% of the claims as part of the VOA Option owned by Josh Vann. They consist of 2 claims within 1 mineral licence at Ten Mile-Duder Lake.

 

4.3 Mineral Tenure Information and Maintenance

 

Mineral rights in the Province of Newfoundland and Labrador are managed by the Mineral Lands Division of the Department of Industry, Energy, and Technology, which coordinates map-staking of Crown mineral licences through the online Mineral Lands Administration Portal (MinLAP). Within the area of a mineral licence there are separate mineral claims, up to 256 coterminous claims per licence area.

 

With respect to Mineral Licence maintenance in Newfoundland and Labrador, NFG must abide by two financial obligations to maintain the licences in good standing:

 

1. Minimum expenditures for ongoing assessment, in which the province requires licence-holders to spend a minimum amount on their exploration activities each year. These minimum expenditure commitments increase with time, as summarized in Table 4.2.

 

NFG’s minimum exploration expenditure obligation for the entire Queensway Project will be $104,408.86 in 2024 (at the effective date) and $1,505,946.54 in 2025. With the current drilling program scheduled to continue throughout 2024, and with ongoing surface reconnaissance and mapping activities, the money NFG spends on exploration will easily exceed the required minimum.

 

In each year of the mineral licence validity, the minimum annual assessment work must be completed by the anniversary date with an assessment report submitted within 60 days of the anniversary date. Excess assessment work expenditures are credited to the licence and can be carried forward to satisfy the expenditure requirements in future years.

 

Any mineral licence holder who intends to conduct an exploration program must obtain an exploration approval from the Newfoundland and Labrador Department of Industry, Energy and Technology before the activity can commence.

1 November 2024

  29 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

2. Licence renewal fees are required every 5 years to year 20 and every year after that, if kept in good standing, from the date when the claim was first staked.

 

Table 4.3 shows the renewal fee per claim for each of the five-year intervals. These fees are due every five years from Year 5 through Year 20, and then annually from Year 21 onward. NFG’s annual renewal fees will be $15,800 for the licences that reach their renewal date in 2024; and $80,175 for the licences that reach their renewal date in 2025.

 

Table 4.2 Minimum expenditures for mineral claims in Newfoundland and Labrador.

 

 

 

Table 4.3 Renewal fees for mineral claims in Newfoundland and Labrador.

 

 

 

 

4.4 Access and Surface Rights

 

Title to the surface rights in Newfoundland and Labrador are necessary to be obtained only to develop a mineral resource under a mining lease. Surface rights to perform non-ground destructive and/or ground-destructive exploration work in permitted areas is obtained through exploration approvals from the Department of Industry, Energy and Technology, under a mineral licence (Mineral Rights Claim Brochure, Mineral Claims Recorders Office of Newfoundland and Labrador, 2015).

1 November 2024

  30 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

NFG does not own surface rights on the Queensway Project except for the Core Yard at Appleton. On an as-needed basis, NFG negotiates agreements that allow exploration activities to be conducted on property owned and administered by others:

 

The province of Newfoundland and Labrador, which administers Crown Lands,

 

The municipalities of Appleton and Glenwood,

 

Property owners of residential properties in Appleton and Glenwood and of cottages and cabins, granted or licence to occupy, outside municipal boundaries.

 

In addition to stipulating the times when the company can conduct work, and the nature of the work that is permitted, these agreements also specify the company’s responsibility for restoring land to an acceptable condition following field activities.

 

For activities on Crown Lands, approval is required from the Mineral Lands Division of the province’s Department of Industry, Energy, and Technology. The primary focus of these applications and approvals is to prevent or minimize adverse impacts on the environment, fish, and wildlife; Section 4.7 of this report summarizes NFG’s environmental permitting activities and the approvals it currently holds.

 

If the Queensway Project advances to the mine production stage, NFG would need to obtain surface rights by applying for a surface lease to the Department of Industry, Energy and Technology, accompanied by a legal survey. Surface leases are issued by the Minister of Industry, Energy and Technology in consultation with the Minister appointed to administer the Lands Act.

 

4.5 Option Agreement (the VOA Option)

 

In addition to the mineral licences staked by NFG, the Queensway Project also includes optioned claim packages that were negotiated by NFG from 2016 through 2018 under 9 separate and completed Option Agreements. These Option Agreements granted mineral rights to NFG in return for a combination of scheduled lump-sum payments, NFG shares and NSR royalties to various individual and company optionors.

 

As of September 2021, when the last of the option payments was made with respect to the 9 Option Agreements, NFG had met all the conditions and earned 100% ownership of the associated mineral licences.

 

On November 2, 2022, NFG executed a single option agreement (the VOA Option) with Aidan O’Neil, Suraj Amarnani, Josh Vann, and VOA Exploration Inc., collectively referred to as the “Optionors”. The VOA Option agreement grants NFG exclusive right and option to acquire a 100% title and interest in a property defined by 5 mineral licences: 035047M and 035197M, 035048M and 035198M, and 035050M, owned by Aidan O’Neil, Suraj Amarnani, and Josh Vann respectively (Figure 4.2; Table 4.1). The claims included in these 5 mineral licences represent 7.8% of the Queensway Property claims (Section 4.2).

1 November 2024

  31 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

In connection with the grant of the VOA Option, NFG shall have the right to enter onto and occupy the optioned property to conduct activities as contemplated in the VOA Option agreement.

 

For NFG to exercise the VOA Option, NFG shall 1) issue an aggregate of 487,078 common shares in capital of NFG (the “Share Issuances”) and 2) make aggregate cash payments of $2,350,000 (the “Cash Payments”) to the Optionors as follows (New Found Gold Corp., 2022a):

 

1. $200,000 and 39,762 Common Shares on the later of (i) Staking Confirmation Date (as defined in the VOA Option Agreement) and (ii) the receipt of the TSX-Venture Exchange’s (the “TSXV”) approval.

 

2. $200,000 and 39,762 common shares on or before November 2, 2023.

 

3. $250,000 and 69,583 common shares on or before November 2, 2024.

 

4. $300,000 and 89,463 common shares on or before November 2, 2025.

 

5. $600,000 and 129,224 common shares on or before November 2, 2026.

 

6. $800,000 and 119,284 common shares on or before November 2, 2027.

 

NFG shall pay all Cash Payments and register all Common Shares issued under the Agreement to VOA Exploration Inc. unless otherwise instructed in writing by the Optionors. “VOA” Exploration Inc. is the consortium of Vann, O’Neil, and Amarnani.

 

Upon NFG completing the Cash Payments and the Share Issuances set forth above, NFG will immediately be deemed to have exercised the VOA Option and acquired a 100% interest in the property free and clear of all encumbrances with no further action required by it resulting in the Optionors’ interest in the property being immediately transferred to NFG. The terms of the VOA Option Agreement do not include any mandatory work commitments, advanced royalty payments, or granting of royalties.

 

4.6 Royalties

 

Seventy-eight of the 103 Queensway Property mineral licences (76%) are currently subject to a Net Smelter Return (NSR) royalty; the other 25 licences are not subject to any royalty. Some royalties were formed within agreements between NFG and the various individuals and companies that optioned their mineral rights to NFG in return for financial compensation that included NSR royalties. Others arise from financing provided by GoldSpot Discoveries Corp. (GoldSpot) in 2019. All claims acquired after the NFG-GoldSpot agreement execution date and contiguous to the NFG-GoldSpot agreement original claims are subject to a 1% NSR royalty to GoldSpot less royalties at the time of acquisition. A summary of the royalty structure at the Queensway Property is presented in Table 4.1. Currently, the NSR royalties range from 0.4% to 3.0% for the 78 licences subject to a NSR royalty.

1 November 2024

  32 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Royalties associated with the NFG-Labrador Gold Corp. Purchase Agreement state that mineral licences 027636M, 207637M and 035204M are subject to a 1% NSR plus $1 per ounce of gold in the ‘indicated mineral resource’ and ‘measured mineral resource’ categories, as defined by CIM definition standards (CIM, 2014). In addition, an advance royalty of $50,000 per annum will be payable, at the election of the Royalty Holder, in cash or common shares, commencing on March 3, 2026, and continuing each year thereafter until commencement of commercial production.

 

Many of NFG’s option and financing agreements have included a buy-back provision that allows the company to reduce the NSR royalty by making a lump-sum payment to the holder of the royalty. NFG has already exercised the buyback option on some of its agreements (e.g., 0.6% NSR related to Linear and JBP Linear Properties Option). Table 4.1 illustrates the current NSR royalty and the amount that could still be bought back. Were NFG to exercise its buy-back rights, the NSR royalties would range between 0.5% and 1.0% for the 28 licences that are subject to a NSR royalty.

 

4.7 Permits

 

NFG is responsible for obtaining all permits in accordance with the laws of Newfoundland and Labrador, and it’s Acts & Regulations, to conduct exploration activities at the Queensway Property. Exploration activities require approval from the Mineral Lands Division of the province’s Department of Industry, Energy, and Technology. These specify the activities that are allowed in the area; they are typically valid for one to two years and can be renewed or amended if required.

 

The different permits and licence requirements in the province of Newfoundland and Labrador can include:

 

1. Exploration Approvals: An Exploration Approval Permit enables an exploration company to conduct prospecting, rock and soil geochemistry, line cutting, trenching, bulk sampling, airborne and/or ground geophysical surveys, fuel storage, ATV usage, diamond drilling, etc.

 

2. Water Use Licence: Activities that require water to be drawn from surface waterways or from aquifers require a Water Use Licence. These are typically valid for five years and can be renewed. These permits are no longer needed for drilling and trenching activities but is still required for a camp.

 

3. Licence to Occupy: Required if a camp location was to be used for a period longer than that which was allowed as part of the Exploration Approval Permit (Fly Camp). This permit is obtained from the Provincial Department of Crown lands. These are typically valid for five years and can be renewed.

1 November 2024

  33 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

4. Section 39 Permit: Operating permit for exploration activities within a Protected Public Water Supply Area (PPWSA), restoration requirements and constraints on field activities are stipulated in a “Section 39 Permit” that is typically valid for one year and can be renewed.

 

5. Section 48 Permit: Required for exploration activities, including stream crossings and/or fording, or any work in and around any body of water or wetland, the Water Resources Management Division must be contacted to obtain a Section 48 Permit to Alter a Water Body under the Water Resources Act, 2002.

 

6. Forestry Operating Permits: An operating permit for each district if operations are to take place on forest land during the forest fire season (May-September).

 

7. Development Permits: Any activity that meets the definition of development under the Urban and Rural Planning Act, 2000, within a municipal planning area/boundary will require application and permit from the Municipality. Other Development permits are required for working near Protected Roads and/or the Gander River Management area.

 

Table 4.4 summarizes the permits, licences and approvals that have currently been granted to NFG, which expire between December 1, 2024, and October 29, 2029, and are re-permitted, or re-applied for, as necessary by NFG:

 

Exploration Approvals (prefixed with E).

 

Water Use Licences for camp water (prefixed with WUL).

 

Section 39 Permits for Development from Water Resources Management (prefixed with PRO).

 

Section 48 Permits to Alter a Water Body (prefixed with ALT).

 

Environmental Assessments (EA) for larger exploration programs requiring public referral along with internal departmental referral.

 

Section 105 Operating Permits and Cutting Permits for Forestry Districts 4, 5, 6, and 8.

 

TVA Temporary Vehicle Access Permit.

 

Other environmental and development permits as requested or in relation to the above permits.

1 November 2024

  34 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Table 4.4 Environmental permits, licences, and approvals.

 

 

 

 

4.8 Environmental Assessment and Significant Factors

 

Mineral licences 024557M, 024558M, 024561M, 024563M, 024568M, and 024570M, all of which lie in the south of Queensway South, are restricted from exploration activities from mid-May to early-July as this area is a spring habitat for Newfoundland caribou.

 

Mineral licence 035198M in Queensway North encloses two known archaeological sites and covers a portion of the Gander River which has high archaeological potential. As such, the Provincial Archaeology Office recommends a 100 m buffer along the Gander River, and 50 m buffers around the two known sites. The two known archaeological sites in UTM Zone 21N NAD83 are:

 

1. 662938 m Easting, 5435800 m Northing, and

 

2. 670038 m Easting, 5439265 m Northing.

1 November 2024

  35 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

The Company has completed a desktop Historic Resources Overview Assessment (HROA) of the Queensway North area to determine the potential for heritage and cultural resources in the area. As a result of this desktop HROA, a field assessment called a Historic Resources Impact Assessment (HRIA) was conducted in 2023. The HRIA determined that the areas evaluated have low potential for archaeological resources and no further investigation or mitigation measure were recommended. The Provincial Archaeology Office of Newfoundland and Labrador reviewed and agreed with the finding of the HRIA.

 

The Company has contracted ongoing environmental baseline studies since 2020 that include groundwater, surface water and sediment sampling, as well as terrestrial and aquatic assessments (New Found Gold Corp., 2023a). The company carried out more in-depth field studies in 2023 to better understand the environmental conditions of the Queensway area. A geotechnical and hydrogeological study and baseline air quality monitoring were initiated in 2023. The Company also conducted a field survey of muskrat and noise and light levels.

 

The QP is not aware of any other restrictions to NFG’s exploration activities, which can generally be conducted year-round once the necessary approvals have been received from the Mineral Lands Division, and/or from the relevant municipal governments and individual property owners.

 

To conclude and to the best of the QPs knowledge, there are no environmental liabilities, significant factors or risks that may affect access, or the right or ability of NFG to perform exploration work on the Queensway Property.

 

With respect to obtaining additional permits, the QP has no reason to assume that the Company would not be granted additional exploration approvals and other permits to advance the Queensway Gold Project. With respect to title, mineral licences: 035047M and 035197M, 035048M and 035198M, and 035050M are owned by Aidan O’Neil, Suraj Amarnani, and Josh Vann respectively (VOA Option). Hence, NFG mineral rights ownership of these licence areas and the mineral occurrences that may occur within them are subject to successful completion of conditions of the single VOA Option agreement in place (see Section 4.5).

1 November 2024

  36 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

5 Accessibility, Climate, Local Resources, Infrastructure and Physiography

 

5.1 Accessibility

 

The Queensway Property can be accessed by plane to the Gander International Airport and by vehicle from the Town of Gander via the Trans-Canada Highway (TCH, Route 1) which passes through the Queensway North claims and the Twin Ponds claims area (the Property is first accessed approximately 15 km west of the Town of Gander, Figure 5.1).

 

The Trans-Canada Highway (TCH, Route 1) provides road access across all of Newfoundland with an east-west distance of 928 km. The Trans-Canada Highway passes through 8 licences in the Queensway North block and 1 licence in the Twin Ponds block.

 

The Property can also be accessed by the Northwest Gander River Road, which runs on the west portion of the Queensway South claims area from Gander Lake and crosses the river into the Queensway South claims. About halfway, at the steel bridge, approximately 15 km south of Gander Lake additional access roads lead into the south Gander Lake area. Within the claims areas, most of the project is accessible via gravel forest access roads, including the Appleton Fault Zone (AFZ) road, the Joe Batt’s Pond Fault Zone (JBPFZ) road to H Pond, and Joe Batt’s Pond Road. Many quad/harvester trails and winter roads provide excellent access for heavy equipment when required.

 

The areas in the far south of the Queensway South area are best reached by 4x4 trucks and All Terrain Vehicles (ATV) along forest roads that begin at the Bay d’Espoir Highway (Route 360), which spurs off the Trans-Canada Highway at Town of Bishop’s Falls, NL (Figure 5.1).

 

In addition to road and ATV access, the mineral licences along the shores of Gander Lake can easily be accessed by boat. The Property can also be accessed by helicopter from the Newfoundland Helicopters base in the towns of Appleton and via Gander International Airport and from small craft float planes based near the international airport in Gander.

 

The nearest seaports are north of the Trans-Canada Highway at the towns of Lewisporte and Botwood, NL, which are approximately 40 and 70 km, respectively, by road from the Town of Glenwood, NL (Figure 5.1). Both port locations have excellent harbour facilities and capabilities.

 

5.2 Site Topography, Elevation and Vegetation

 

The Queensway Property area is dominated by broad, northeast-trending ridges separated by valleys with linear bogs, brooks, and larger ponds (Figure 5.2). Gander Lake and the Gander River are the most important water bodies in the project area.

 

1 November 2024

  37 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 5.1 Access to the Queensway Property.

 

 

1 November 2024

  38 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 5.2 Shaded relief image for the Queensway Project area, with outline of the Queensway mineral licences and bodies of water.

 

 

 

1 November 2024

  39 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Within the property, the ground elevation rises to approximately 320 m above sea level at a ridge east of Caribou Lake in the southeast and drops to a low of 15 m above sea level in the north portion of the property, where the Gander River flows toward the North Atlantic coast. Boreal forest covers much of the project area and includes areas that have been logged and re-planted with white and black spruce seedlings.

 

5.3 Climate

 

The climate is blended maritime-humid continental - pleasant in the summer, cool and wet in the spring and autumn, and snowy, often windy, in the winter. Summer temperatures are typically in the 20° C to 25° C range, but highs can peak above 30° C (Figure 5.3). Winter temperatures typically range from −15° C to +5° C. Precipitation is usually in the form of snow from December to April; rainfall is typical the rest of the year, usually as showers to heavy rain, frequently occurring with strong winds.

 

Weather is dominated by ocean currents, prevailing westerlies, and storms coming from the west over the Maritime provinces and Québec, or from the south along the US Eastern Seaboard. The typical spring/summer exploration season is from May to late November. Winter conditions start early in November and sometimes extend into May.

 

The Gander area climate is conducive to exploration companies having the capability to conduct year-round exploration work. Geological mapping, prospecting and surface rock sampling programs are typically limited to the summer and summer shoulder months (i.e., spring, or March to May, and fall or September and October) when snow still melts and/or precipitation occurs largely as rainfall. Geophysical surveys and drilling can easily be competed year-round including through the winter months after the snow/ice has either melted or formed ice layers that are thick enough to support equipment. Producing mines in NL operate year-round. With respect to seaports in the general Queensway Property area, the sea ice is typically open year-round; however, sea ice has disrupted winter shipping in some years.

 

5.4 Local Resources and Infrastructure

 

The proximity to Gander, NL provides the Queensway Project with the benefits of a local community with an approximate population of nearly 12,000 persons (2021 Census of Population), which includes accommodation, restaurants, hardware, garages, office space, etc. within a short drive from the property and fieldwork. This is made possible by its proximity to the town of Gander, 12 km to the east of the Queensway North claims along the Trans-Canada Highway (Figure 4.2). Gander has many amenities that one would expect to find in a major city: an international airport and most of the equipment and supplies required for exploration. The people of Gander are also a source for much of the labour required for NFG’s exploration programs.

 

 

 

1 November 2024

  40 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 5.3 Climate data for Gander International Airport. Source: Environment Canada.

 

 

 

 

 

 

The small Town of Appleton lies just within the Queensway North claims area; the neighbouring Town of Glenwood lies across the Gander River, just to the west of the project’s claims (Figure 4.2). With a combined population of approximately 1,400 individuals many of whom work in the resource sectors, these towns are also a source for workers and support staff. A helicopter base and an environmental remediation company are in Appleton.

 

In the Appleton Industrial Park, NFG has purchased eight lots that host a fenced-in core yard, an office trailer, a shipping container, and a trailer-style camp for drill crews.

 

Skilled and semi-skilled workers can also be found in Grand Falls−Windsor, a town with a slightly larger population (close to 14,000 persons) in comparison to Gander and is approximately 76 km west of the Queensway North claims along the TransCanada Highway (Figure 5.1).

 

5.4.1 Power Supply

 

Electricity is available from the Newfoundland provincial grid, which has three electricity transmission corridors that cross the Queensway Project lands:

 

A 350 kV high voltage direct current line, which passes through the approximate centre of the Queensway South licences. This is the line that brings electricity from the hydroelectric dams at Churchill Falls and Muskrat Falls in Labrador across the island of Newfoundland to St. John’s.

1 November 2024

  41 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Two 138 kV high voltage alternating current transmission lines to the north of the Trans-Canada Highway on the Queensway North licences. These supply electricity to the towns of Glenwood, Appleton, and Gander from the hydroelectric dams at Grand Falls, Bishop’s Falls and Norris Arm.

 

A 69 kV high voltage alternating current transmission line that runs across Queensway North along the Trans-Canada Highway. These also supply electricity to the towns of Glenwood, Appleton, and Gander from hydroelectric dams in north-central Newfoundland.

 

5.4.2 Water Supply

 

Other than the Water Use Licences described in Section 4.7, there is currently no developed water supply or water right attached to the Queensway Project. However, when the need arises, NFG can apply for permission to draw water from the several bodies of water within, or adjacent to, the Company’s mineral claims (Figure 5.2).

 

The towns of Appleton, within the Queensway North claims area, and Glenwood, just to the west, have municipal water and sewer systems.

 

1 November 2024

  42 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

6 History

 

6.1 Introduction

 

The objective of this section is to discuss historical mineral occurrences and historical exploration work that was conducted on the Queensway Property by mineral exploration companies other than NFG. In instances when the discussion relates to areas, or mineral licences/claims, that occur outside of the current Queensway Property Mineral licences, the reader should know that the QP has been unable to verify information pertaining to the geology and mineralization on these areas, and therefore, the information is not necessarily indicative to geology and the mineralization at the Queensway Gold Property that is the subject of this technical report. This disclaimer is applicable to sub-sections 6.1 and 6.2 where the QP has included ‘within-property’, or ‘off-property’, notices to alert the reader as to the general location that the historical work was completed.

 

Small-scale mining efforts began in the late 1700s in Newfoundland with the first mining developments in the mid-1800s on the northeast and east coasts of the Island. A major iron ore mining operation began in the late 1800s, on Bell Island in Conception Bay near St. John’s. When it closed in 1969, Bell Island was the longest continually operating mine in Canada and had, for decades, served as one of the world’s major suppliers of iron ore. Large copper deposits with high traces of gold were discovered at Tilt Cove in 1857, and between 1864 and1917, on the Baie Verte peninsula northwest of Botwood and Lewisporte (Figures 2.1 and 6.1). The Tilt Cove mine represented one of the world's largest producers of copper.

 

The historical major mine developments at the Tilt Cove and Bell Island mines - and their associated infrastructure and access - prompted additional exploration work in northeast Newfoundland. In the areas north and south of Gander Lake, and proximal to the Queensway Property, the historical focus was largely on base metal deposit types that might be associated with the rocks of the Gander River Ultramafic Complex. Individual prospectors were historically able to locate gold in surface samples in northeast Newfoundland, but it was not until the early 1980s that government mapping identified a gold prospect at the Jonathan’s Pond prospect, which is located about 10 km north of the Town of Gander, NL, 3.8 km southeast of NFG’s Little Rocky Brook and 4.3 km northeast of the Queensway North blocks (Blackwood, 1982; Figure 6.1).

 

Since the discovery of the gold prospect at Jonathan’s Pond in the early 1980s, numerous historical mineral prospects, including gold, base metals, and sulphide (pyrite and arsenic) have been discovered in the general Queensway Property area (Figure 6.1). Specific within-property gold prospects in the Queensway South and Queensway North blocks include:

 

QWS historical gold prospects: Aztec, Goose, Greenwood Pond #1 to Greenwood Pond #7, A-Zone Extension, LBNL, Hornet, Road Gabbro, and North Paul’s Pond (14 gold prospects).

1 November 2024

  43 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

QWN historical gold prospects: Cokes, Hornet, Zone 36, Trench 36, Little, Bowater, Lotto, Lake Side No 1, Grouse, Letha, Pocket Pond, Grid 69 Gold, Power Line, Baseline Showing, Keats, Road Showing, Lachlan, The Knob, Bullet, Dome, and H Pond (20 historical gold prospects).

 

The historical exploration generally occurred along and adjacent to the two linear mineralized trends that are orientated in an SSW - NNE direction: the Appleton Fault Zone (AFZ) and the Joe Batt’s Pond Fault Zone (JBPFZ). As shown in Figure 6.1, the fault zones run approximately parallel to one another, about 5 km apart.

 

6.2 Historical Exploration by Companies Other Than New Found Gold Corp.

 

The QP includes a summary of select historical exploration work programs that include gold-specific historical gold assays and/or gold-related information (Table 6.1). The compilation includes historical exploration work that occurs 1) within-property, 2) off-property, and/or 3) may include work that occurred on licences that overlap with the current NFG land position. Hence, and to further assist the reader on deciphering within-property and off-property exploration results, the QP presents the general spatial location of the exploration work programs in Figure 6.2.

 

Several historical assessment reports filed with the provincial government have historically referred to the Queensway Property area as:

 

The Linear Property, a reference to the long linear trend formed by many showings and prospects along both the Appleton and Joe Batt’s Pond fault zones.

 

The Gander Gold Property, a reference to Gander Lake and Gander River (including its extensions, NW Gander River and SW Gander River, on the south side of Gander Lake) along which much of the early exploration work was done.

 

Following the many ownership changes summarized in Table 6.1, and starting in 2016, Palisade Resources Corp (later renamed to New Found Gold Corp.) began to consolidate the large land package that now forms the Queensway Project, through map-staking unclaimed land and negotiating option agreements with others who held mineral licences. New Found Gold Corp disclosed the assembled land package when the Company announced its Initial Public Offering on the TSX Venture Exchange in 2020.

 

Labrador Gold Corp.’s (LabGold) Kingsway Project and Sky Gold Corp.’s (Sky Gold) Mustang Property, both of which were acquired 100% by NFG in 2024, bolsters the overall number of historical till, soil, rock, and drilling work completed within the Queensway Property. Hence, where applicable, the QP has singled out the LabGold and Sky Gold historical information in this sub-section.

1 November 2024

  44 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 6.1 Mineral prospects in the Queensway Property area. The inset figures illustrate historical prospects (non-bold font) and NFG-discovered prospects (bold font).

 

 

1 November 2024

  45 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 6.2 Location of historical exploration programs conducted by companies other than NFG. The location names accompany the names used by various companies and prospectors listed in Table 6.1. Within Property exploration work is highlighted in red text.

 

 

 

1 November 2024

  46 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Table 6.1 Summary of select historical exploration work conducted by companies other than NFG. The compilation is limited to work that includes notable gold assays and results. Within Property work is highlighted in red text on the accompanying Figure 6.2.

 

 

 

1 November 2024

  47 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

A summary of the historical prospecting, geological mapping, surface rock sampling, geophysical surveys, trenching, and drilling is presented in the text that follows.

 

6.2.1 Prospecting, Geological Mapping, and Geochemical Surveying

 

The earliest prospecting in the area, from the 1950s through to the 1970s, was focused predominantly on identifying base metal prospects including 1) talc, copper, zinc, tungsten, arsenopyrite, and asbestos showings were discovered along Dead Wolf Creek, and around Caribou Lake and Hunt’s Pond, 2) chromite, magnesite, and asbestos were discovered in the Gander River Ultramafic Complex north of Gander Lake, and 3) a Pyrite-Chalcopyrite-Sphalerite showing was identified north of Jonathan’s Pond near the Town of Gander.

 

In 1980, Frank Blackwood of the Newfoundland Geological Survey identified a gold-arsenopyrite showing near Jonathan’s Pond (Blackwood, 1982). This discovery launched decades of prospecting activity for gold that continues to this day. The association of arsenopyrite with gold yielded a promising prospecting tool, and subsequently, the identification of arsenopyrite in outcrop and float boulders along the Appleton and Joe Batt’s Pond fault zones led to new gold prospect discoveries and created target areas for further investigations with trenches and drillholes.

 

Historical geological mapping identified potential target areas through 1) identification of ice flow directions in relation to mineralized float boulder discoveries, 2) surface traces and 3D orientations of faults and veins that often host strong gold mineralization, and 3) to establish the relative timing of different geological events, leading to a better understanding of where gold prospects might be located.

 

Elevated gold in the till, soil, stream sediment sample medias, and float, outcrop, and trench channel rock samples can be indicative of gold at depth in proximal, and distal, locations depending on the depth to, and the natural weathering of, the underlying bedrock.

 

In addition, follow-up exploration programs such as the work completed by the Paragon-Rubicon joint venture along the Appleton Fault Zone in 2007-2008 included relogging of historical drill core that had been drilled by previous companies in the area that they had optioned. This created a consistent data base of descriptive logging information that assisted the targeting of new drillholes by improving the joint venture’s ability to interpret geological information and gold assays between drillholes from different companies.

 

With respect to geochemical survey analytical results, a summary of historical till gold assay analytical results is presented in Figure 6.3 and includes a total of 1,601 till assays within the boundaries of the Queensway Property, 535 samples of which were conducted by LabGold (33%).

1 November 2024

  48 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

Figure 6.3 Historical till gold assay analytical results. Block abbreviations: QWS - Queensway South; QWN - Queensway North; TP - Twins Pond; TMDL - Ten Mile-Duder Lake; LRB - Little Rocky Brook; and BP - Bellman’s Pond.

 

 

 

1 November 2024

  49 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

Anomalous within-property till gold assays by NFG Queensway block area include:

 

Queensway South block: 736 till samples yield between 0.0002 and 42.0300 ppm Au with approximately 21 anomalous samples - as defined by samples with >0.5 ppm Au documented in the vicinity of the LBNL, Greenwood Pond #2, and Dead Wolf Brook Junction No 1 mineral prospects.

 

Queensway North block: Of the non-LabGold samples, 411 till samples yield between 0.0005 and 23.0000 ppm Au with approximately 30 anomalous samples - as defined by samples with >0.5 ppm Au documented in the vicinity of the Glass and Grid 69 Gold mineral prospects, as well as the Blue Peter area.

 

With respect to the LabGold till samples (n=535 analyses) within QWN, total gold grain counts ranged from 0 to 311 grains, of which 63 samples contained more than 50 gold grains. LabGold analytical results ranged between 0.001 and 100 ppm Au with 10 samples greater than 10 ppm Au including a single sample from the Big Vein prospect that contained 258 pristine grains and yielded 25.39 ppm Au (Tettelaar, 2024).

 

Twin Ponds block: 3 till samples yield between 0.0050 and 7.7960 ppm Au with 1 anomalous sample - as defined by samples with >0.5 ppm Au documented in the vicinity of the Twin Ponds area.

 

Bellman’s Pond block: 2 till samples yield between 0.0180 and 0.1120 ppm Au with no anomalous sample - as defined by samples with >0.5 ppm Au.

 

A summary of historical soil gold assay analytical results is presented in Figure 6.4 and includes a total of 25,791 soil assays within the boundaries of the Queensway Property, of which 12,145 samples were conducted by LabGold (47%). Anomalous within-property soil gold assays by NFG Queensway block area include:

 

Queensway South block: 1,902 soil samples yield between 0.00005 and 2.19 ppm Au with 3 anomalous samples - as defined by samples with >0.5 ppm Au documented in the vicinity of the North Paul’s Pond and Greenwood Pond #1 mineral prospects.

 

The QPs review of the Sky Gold soil survey dataset within QWS shows that a total of 499 soil samples were collected, 237 of which have Au assay results. In 2021, Sky Gold disclosed that 445 soil samples were collected within 3 sample grids (Sky Gold Corp., 2021a). The programs enabled Sky Gold to identify gold-in-soil geochemical anomalies in the northern and western portions of the Mustang Property, including the North Woodman Pond, West, and RB (Road Breccia) prospects.

 

Queensway North block: Of the non-LabGold samples, 10,477 soil samples yield between 0.0005 and 3.84 ppm Au with approximately 11 anomalous samples - as defined by samples with >0.5 ppm Au documented in the vicinity of the Glass, Little, Letha, and Lachlan mineral prospects.

1 November 2024

  50 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

With respect to the LabGold soil samples within QWN, gold values ranged between 0.0005 ppm and 9.95 ppm Au with an average of 0.016 ppm Au. A total of 181 samples had gold results more than 0.1 ppm Au and 12 samples more than 1.0 ppm Au (Tettelaar, 2024). An outcrop discovery of a gold-bearing quartz vein, called the Big Vein prospects, occurs within a 3 km long, northeast-trending, gold-in-soil anomalous area.

 

Twin Ponds block: 1,028 soil samples yield between 0.00025 and 0.1 ppm Au with no anomalous samples - as defined by samples with >0.5 ppm Au.

 

A summary of historical stream and lake sediment gold assay analytical results is presented in Figure 6.5 and includes a total of 554 stream and 73 lake assays within the boundaries of the Queensway Property. LabGold did not collect stream or lake sediment samples. Anomalous within-property stream and lake gold assays by NFG Queensway block area include:

 

Queensway South block: 518 stream and 16 lake samples yield between 0.00025 and 1.897 ppm Au with approximately 13 anomalous samples - as defined by samples with >0.05 ppm Au documented in the vicinity of the Greenwood Pond #1 and North Paul’s Pond mineral prospects.

 

Queensway North block: 34 stream samples yield between 0.0017 and 1.02 ppm Au with approximately 3 anomalous samples - as defined by samples with >0.05 ppm Au documented in the vicinity of the Grid 69 Gold mineral prospects. 9 lake samples yield between 0.011 and 0.0423 ppm Au.

 

Ten Mile-Duder Lake block: 2 steam samples yield between 0.00025 and 0.0017 ppm Au.

 

Twin Ponds block: 48 lake samples yield between 0.0001 and 0.0056 ppm Au.

 

A summary of historical rock gold assay analytical results is presented in Figure 6.6 and includes a total of 6,021 rock assays within the boundaries of the Queensway Property, or which 2,512 samples were conducted by LabGold (42%). Anomalous within-property rock gold assays by NFG Queensway block area include:

 

Queensway South block: 1,071 rock samples yield between 0.00025 and 46.19 ppm Au with approximately 61 anomalous samples - as defined by samples with >1 ppm Au documented in the vicinity of the Greenwood Pond #7, LBNL, and Dead Wolf Brook Junction No 1 mineral prospects.

 

The QPs review of the Sky Gold rock sampling dataset within QWS shows that a total of 408 rock samples were collected (210 float, 140 outcrop, and 58 subcrop samples), of which 205 samples have Au assay results. In 2021, Sky Gold disclosed that a total of 296 rock samples were collected over an approximately 1.25 km zone within the Mustang (and parallel) zones (Sky Gold Corp., 2021b). Most samples comprised quartz veining, brecciation and silicification material, and quartz stockwork, with associated sulphide (pyrite, arsenopyrite, and sphalerite). The Sky Gold program outlined 3 prospective areas:

1 November 2024

  51 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Piper and Mustang North: 22 rock samples yielded between 0.84 ppm Au and 10.30 ppm Au, averaging 1.31 ppm Au.
Mustang Central: 18 rock samples yielded between 0.17 ppm Au and 3.42 ppm Au, averaging 1.31 ppm Au.
Mustang South: Of the 24 rock samples collected, 16 samples yielded between 0.10 and 12.14 ppm Au and averaged 2.68 ppm Au (Sky Gold Corp., 2021b).

 

Queensway North block: Of the non-LabGold samples, 2015 rock samples yield between 0.00025 and 798.87 ppm Au with approximately 293 anomalous samples - as defined by samples with >1 ppm Au documented in the vicinity of the Knob, Lachlan, Lake Side No 1, Glass, Pocket Pond, and Lotto Zone mineral prospects.

 

Gold value ranges of the 2,512 LabGold rock samples that were collected and analyzed within QWN yielded between 0.005 ppm and 1,065.37 ppm Au (Tettelaar, 2024). A total of 52 samples yielded greater than 1.0 ppm Au. Samples with greater than 1.0 ppm Au have a weak correlation with elevated arsenic (range 5 to >1,000 ppm, upper detection limit), copper (range 5-1,065 ppm), and antimony (range 7-213 ppm). A 0.20 m to up to 2.0 m thick, northeast-trending quartz vein at the Big Vein prospect yielded the best gold in rock values (e.g., 38.47 ppm, 65.94 ppm, 184.68 ppm, and 1,065.37 ppm Au). Other elevated zones with high gold rock values include the Golden Glove prospect (e.g., 338.08 ppm, 194.28 ppm, 193.69 ppm, 479.51 ppm Au) and the Knobby prospect (e.g., 47.47 ppm, 20.89 ppm Au).

 

Twin Ponds block: 103 rock samples yield between 0.0025 and 2.171 ppm Au with approximately 8 anomalous samples - as defined by samples with >1 ppm Au.

 

Ten Mile-Duder Lake block: 70 rock samples yield between 0.00025 and 1.2063 ppm Au with 1 anomalous sample - as defined by samples with >1 ppm Au.

 

Little Rocky Brook block: 42 rock samples yield between 0.005 and 7.996 ppm Au with 1 anomalous sample - as defined by samples with >1 ppm Au.

 

Bellman’s Pond block: samples yield between 0.0025 and 0.191 ppm Au with no anomalous sample - as defined by samples with >1 ppm Au.

 

6.2.2 Trenching

 

In areas with prospective mineralized showings at surface, several companies have used heavy equipment to excavate trenches that allow them to test the mineralization to a greater depth, either taking channel samples along the walls of the trench or collecting material from the trench for a small bulk sample. The larger volume and deeper reach of a trench enhances the reliability of information that can be gathered from surface samples alone; they also improve the interpretations that can be made regarding source rocks for till anomalies and orientations of mineralized veins.

1 November 2024

  52 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

A summary of historical channel gold assay analytical results is presented in Figure 6.7 and includes a total of 1,314 channel assays within the boundaries of the Queensway Property. Anomalous within-property channel gold assays by NFG Queensway block area include:

 

Queensway South block: 328 channel samples that contain between 0.0025 and 4.06 ppm Au with approximately 23 anomalous samples - as defined by samples with >1 ppm Au documented in the vicinity of the Goose and Greenwood Pond #5 mineral prospects.

 

Sky Gold collected a total of 124 trench samples in QWS, of which there are 116 Au assay results.

 

Queensway North block: 870 channel samples that contain between 0.0025 and 631.34 ppm Au with approximately 224 anomalous samples - as defined by samples with >1 ppm Au documented in the vicinity of the Knob, Cokes, Bowater, Dome, and Pocket Pond mineral prospects.

 

To the best of the QPs knowledge, LabGold did not conduct trenching exploration work at their Kingsway Gold Project prior to NFG acquiring 100% rights to the property.

 

6.2.3 Geophysical Surveys

 

Historical airborne and ground geophysical surveys have been implemented to identify anomalous drill targets and to improve the understanding of regional structures like the Appleton and Joe Batt’s Pond fault zones, and smaller offshoot faults that might form pathways for the mobilization and accumulation of mineralized fluids.

 

6.2.3.1 Airborne Geophysics

 

Late 1970s assessment reports record airborne geophysical surveys that were used to explore for base metals associated with the Gander River Ultramafic Complex. Two airborne known gold exploration surveys were completed prior to the consolidation of the Queensway land package. In 2003, Fugro conducted a magnetic survey and a separate electromagnetic survey on behalf of Rubicon Minerals over the northern end of the JBPFZ to the Twin Ponds area. In 2012, Goldak, on behalf of Northern Skye Resources, flew a magnetic survey over both the AFZ and the JBPFZ.

 

1 November 2024

  53 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 6.4 Historical soil gold assay analytical results. Block abbreviations: QWS - Queensway South; QWN - Queensway North; TP - Twins Pond; TMDL - Ten Mile-Duder Lake; LRB - Little Rocky Brook; and BP - Bellman’s Pond. Bedrock geology legend is in Figure 6.3.

 

 

 

1 November 2024

  54 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 6.5 Historical stream and lake sediment gold assay analytical results. Block abbreviations: QWS - Queensway South; QWN - Queensway North; TP - Twins Pond; TMDL - Ten Mile-Duder Lake; LRB - Little Rocky Brook; and BP - Bellman’s Pond.

 

 

1 November 2024

  55 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 6.6 Historical rock gold assay analytical results. Block abbreviations: QWS - Queensway South; QWN - Queensway North; TP - Twins Pond; TMDL - Ten Mile-Duder Lake; LRB - Little Rocky Brook; and BP - Bellman’s Pond. Bedrock geology legend is in Figure 6.3.

 

 

1 November 2024

  56 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 6.7 Historical trench channel sample gold assay analytical results. Block abbreviations: QWS - Queensway South; QWN - Queensway North; TP - Twins Pond; TMDL - Ten Mile-Duder Lake; LRB - Little Rocky Brook; and BP - Bellman’s Pond.

 

 

 

1 November 2024

  57 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Both geophysical surveys identified SSW-NNE to SW-NE linear structures consistent with the broad regional topographic fabric and the orientation of the major fault zones. With high sensitivity magnetometers, the Goldak survey was able to resolve short, narrow linear features that did not follow the dominant regional structural trend. These were interpreted as being either dikes, or as fault crosses; the ability to resolve these types of local structural details improved local geological mapping and assisted with the selection of drill targets.

 

LabGold commissioned Geotech Ltd. to conduct a 1,535 line-km helicopter-borne versatile time domain electromagnetic (VTEM™) geophysical survey over 94 km2 at the Kingsway Property (now the north portion of Queensway North block).

 

6.2.3.2 Ground Geophysics

 

Historical ground-based geophysical surveys in the Queensway area include very-low frequency electro-magnetic (VLF-EM) surveys and Induced Polarization (IP) surveys. The surveys confirmed the overall structural trends and identified conductive units that are likely graphitic. The mineralized quartz veins, especially when altered by the mineral sericite, have low resistivity. The ability to image these veins with their 3D orientations improves drill targeting.

 

LabGold conducted ground geophysical surveys at the Kingsway Property (now the north portion of NFGs Queensway North block) that included very low frequency electromagnetic (VLF-EM), magnetic, induced polarization, and controlled source audio-frequency magnetotellurics (CSAMT). In 2023, LabGold contracted SRK to review the VLF-EM data and provide a structural interpretation related to structural controls on gold mineralization (Tettelaar, 2024).

 

6.2.4 Labrador Gold Corp. Structural Study

 

LabGold contracted SRK to conduct structural geology reviews to identify the main structural control and potential truncation or offset on gold mineralization on the Property. SRK evaluated outcrops, drill core, heli-borne VTEM, and ground VLF-EM datasets. Three generations of deformational structures were identified:

 

D1 anastomosing network of northeast to north- northeast trending faults or shear zones.

 

D2 is a late phase of progressive D1, associated with complex quartz+carbonate+/-pyrite+/-arsenopyrite veining (“V2”) that includes steeply dipping northeast- to east-northeast-trending shear veins, and shallowly to moderately dipping northeast-trending extensional-shear veins.

 

D3 southeast trending faults are relatively widespread and evenly distributed across the Property and segment D1 and D2 structures (Tettelaar, 2024).

1 November 2024

  58 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Known gold occurrences are spatially associated with D1 structures and are located along higher order D1 structures (Appleton #2), at intersections of higher order structures (Cracker, Golden Glove, and possibly Big Vein), or directly adjacent to major fault zones (Midway and Pristine).

 

In some instances, IP surveys helped to elucidate the presence or absence of a continuous zone of mineralization between closely spaced showings (like Aztec and the A-Zone in Queensway South), which improved the ability to interpret them as one continuous zone, with a drilling gap, or two separate zones. IP surveys have also been used to resolve local details in areas where satellite imagery shows complex structure that cannot be well resolved from the satellite images alone.

 

6.2.5 Drilling Overview

 

Table 6.2 summarizes the historical drilling that was conducted by 15 companies that drilled within the Queensway Property prior to NFG. The historical drilling was conducted as diamond drillholes, with core sizes range from narrow diameter BQ core, with a core diameter of 36 mm, to wider HQ core, with a core diameter of 64 mm.

 

A summary of the historical within Property drilling is presented in Figure 6.8 and Table 6.2 and includes a total of 766 drillholes (totalling 133,181.1 m). Of these,

 

692 of the 747 historical drillholes (93%) are in the Queensway North block, including holes drilled by the 4 most historically active companies that drill-tested within the Queensway Property: LabGold, Rubicon Minerals Corp, United Carina Resources, Paragon Minerals Corp.

 

The LabGold drill programs account for 67% of the historical drilling within the overall Queensway Property, all of which occur within the Queensway North block.

 

The historical LabGold drillholes define the Big Vein, Doyle Zone-Pristine, Midway, Dropkick, Golden Glove, Knobby and HM prospects.

 

Other Queensway North block prospects discovered through historical drilling include Grid 69 Gold, Dome, Bowater, Letha, Keats, H Pond, and Pocket Pond.

 

55 of the 747 historical drillholes (7%) within the Queensway Property were drilled in the Queensway South block in the vicinity of Aztec, Goose, North Paul’s Pond, and Dead Wolf Brook Junction No 1 mineral prospects.

 

Sky Gold drilled 19 diamond drillholes totaling 3,352 m at the Mustang Zone, which is now in NFGs Queensway South Block.

 

1 November 2024

  59 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 6.8 Historical drillholes (by company). Block abbreviations: QWS - Queensway South; QWN - Queensway North; TP - Twins Pond; TMDL - Ten Mile-Duder Lake; LRB - Little Rocky Brook; and BP - Bellman’s Pond.

 

 

1 November 2024

  60 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 6.2 Summary of historical drilling at Queensway.

 

 

 

 

6.2.6 Summary of Labrador Gold Corp.’s Historical Drilling

 

Between April 2021 and February 2024, 341 diamond drillholes totaling 91,420.09 m were drilled by LabGold (Figure 6.9). The drilling was conducted at the following gold prospects: Big Vein (177 holes, 47,392.4m), Big Vein Southwest (23 holes totaling 10,799.9 m), Doyle Zone-Pristine (45 holes totalling 9,755.7m), Golden Glove (25 holes totaling 9,635.92 m), Knobby (21 holes totaling 3,243.7 m), Dropkick (15 holes totaling 2,956.98 m), Peter Easton (12 holes totaling 2,571 m), Midway (8 holes totaling 1,835 m), CSAMT (8 holes totalling 2,622 m), and HM (7 holes totalling 607 m). A total of 65,778 core samples were submitted for gold analysis.

 

Based on LabGold’s technical report (Tettelaar, 2024), select descriptions of the Big Vein, Big Vein Southwest, Doyle Zone-Pristine, and Golden Glove prospects are described in the text that follows. The true width of mineralization has not been calculated and the LabGold assay interval information in the text that follows is reported as measured depths (core length).

 

Following up on a surface exposed auriferous quartz veins discovery in 2020, the Big Vein prospect has been subjected to over 50% of LabGold’s diamond drilling.

1 November 2024

  61 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 6.9 Locations of historical drilling completed by Labrador Gold Corp. Source: Tettelaar (2024).

 

 

1 November 2024

  62 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Drill results at the Big Vein prospect indicate 3 zones of gold mineralization, a near surface gold-bearing quartz vein zone hosted in interbedded mudstone, siltstone, and sandstone, and two deeper zones referred to as the HTC zone and the Greenmantle zone, which are hosted in dominantly black to grey to green shale. A south southwest striking, steeply dipping, graphitic, fault (the Black Shale Fault) separates the two sedimentary units (Figure 6.10). This fault is interpreted to control the gold mineralization at Big Vein and represents a second or third order structure associated with the Appleton Fault Zone.

 

Big Vein prospect core-length gold intercepts have elevated gold mineralization within a narrow-veined zone that is encased in a wider low-grade gold zone. For example, 1) Drillhole K-22-214 has 1.19 ppm Au over 41.80 m including 61.15 ppm Au over 0.30 m, and 2) Drillhole K-22-177 includes 2.02 ppm Au over 32 m, including an 18.08 ppm Au sample over 0.63 m.

 

Other select drill results are presented in Table 6.3. The results indicate gold mineralization at the Big Vein prospect extends up to 500 m in strike-length, up to 400 m in vertical depth (to the Greenmantle zone), and is open along strike and down dip.

 

The Big Vein Southwest prospect occurs at the interpreted southern extension of the Black Shale Fault (Figure 6.10) and has similar gold mineralization patterns as the Big Vein prospect. For example, drillhole K-22-211 has wide core-length zones of low-grade gold (8.60 ppm Au over 4.41 m) that encapsulate narrow zones of high-grade gold (53.52 ppm Au over 0.31 m). The Big Vein Southwest prospect mineralization extends 200 m along strike and occurs at vertical depths that range between 180 m to 260 m below surface. Gold mineralization between the Big Vein and Big Vein Southwest prospects extends for over 700 m along strike.

 

Drill results from the Pristine prospect within the Doyle Zone show near surface gold mineralization that has similar characteristics to the Big Vein prospect. Auriferous, quartz-carbonate shear veins occur in a zone that is oriented subparallel to and in proximity to a mineralized fault, the Disco Fault, which is interpreted to represent a second or third order structure associated with the Appleton Fault Zone (Figure 6.11). Gold mineralization at the Doyle Zone extends up to 200 m in strike-length and to vertical depths of approximately 85 m. Examples of select core-length intercepts at Pristine include 1) drillhole K-23-270 with 11.98 ppm Au over 6 m including 30.61 ppm Au over 2.33 m and 82.2 ppm Au over 0.75 m, and 2) drillhole K-21-109 with 3.55 ppm Au over 2.33 m. Select gold assay intersection are presented in Table 6.4.

 

Diamond drill testing at the Golden Glove prospect encountered a narrow zone of gold mineralization, intersected in the first two holes, as presented in Table 6.5. The mineralization is hosted within thickly bedded siltstone and sandstone at a vertical depth of 235 m and horizontal spacing of 20 m. A zone of anomalous gold (117 ppb to 1,518 ppb) was also intersected at a vertical depth of 50-60 m in 7 holes over a strike-length of approximately 100 m. Drilling along strike to the north encountered fine siltstone and mudstone units but did not intersect significant mineralization.

1 November 2024

  63 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 6.10 Big Vein and Big Vein Southwest geological and diamond drill summary. Source: Tettelaar (2024).

 

 

 

Table 6.3 Select Big Vein prospect drill core assay interval results.

 

 

1 November 2024

  64 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 6.11 Doyle Zone-Pristine prospect geological and diamond drill summary. Source: Tettelaar (2024).

 

 

 

Table 6.4 Select Pristine prospect drill core assay interval results.

 

 

Table 6.5 Select Golden Glove prospect drill core assay interval results. 

 

1 November 2024

  65 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

6.2.7 Summary of Sky Gold Corp.’s Historical Drilling

 

In 2021, Sky Gold drilled 19 diamond drillholes totaling 3,352 m at the Mustang Zone. The drilling was conducted along a 1.2 km strike length and several narrow gold mineralized intercepts were disclosed (Sky Gold Corp., 2021c). Select intercepts reported included 1) drillhole MT-21-14 with 3.80 ppm Au over 1.50 m at a measured core-length depth of 36.42 m and 7.77 ppm Au over 0.50 m at 66.04 m, and 2) drillhole MT-21-15 had 7.49 ppm Au over 0.50 m at 99.3 m depth. Wider intervals with lower grade gold values were also intercepted. For example, drillhole MT-21-14 had 0.78 ppm Au over 32.85 m at a measured core-length depth of 15.00 m, and drillhole MT-20-01 contained 0.58 ppm Au over 20.32 m at a depth of 80.18 m.

 

6.2.8 Conclusions and Quality of Historical Data

 

The historical exploration campaigns in the Queensway Property area provide numerous indications of gold mineralization, with gold grades above 100 ppm Au reported within mineralized outcrop and float, till samples, and drillhole intercepts. Within the boundaries of the Queensway Property,

 

Queensway South block: Contains anomalous till, soil, lake and stream and lake sediment, rock, and drill core samples in the Greenwood, Goose, LBNL, Dead Wolf Brook Junction No 1, North Paul’s Pond prospect areas.

 

Queensway North block: Contains anomalous till, soil, lake and stream and lake sediment, rock, and drill core samples in the Lotto Zone, Dome, Glass, Pocket Pond, Lachlan, Lake Side No 1, The Knob, Bowater, Little, Letha, Grid 69, Big Vein, Doyle Zone-Pristine, Midway, Dropkick, Golden Glove, Knobby, and HM prospect areas.

 

NFGs July 2024 100% acquisition of LabGold’s Kingsway gold project extends NFGs Queensway North block further north. Since 2020, Labrador Gold has completed extensive ground geochemical sampling surveys as well as diamond drilling programs at targets including Big Vein (Labrador Gold Corp., 2024).

 

LabGold’s historically drill-defined Big Vein and Big Vein Southwest prospects suggest the potential for the extension of gold mineralization northward along NFGs interpreted Appleton Fault mineralized envelope (see Section 7.4). NFGs Bigger Vein 2 and Karate Chop South prospects are proximal and along strike of LabGold’s neighbouring Big Vein and Dropkick zones, respectively. It is possible that these zones are inter-related along the Appleton Fault Zone.

 

Other NFG Queensway Property blocks: Contain anomalous till, soil, lake and stream and lake sediment, rock, and drill core samples in the Twin Ponds and Gander River areas.

1 November 2024

  66 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

With respect to uncertainties, the locations of the historical drillhole collars are influenced by several factors, including:

 

The changing precision of different surveying methodologies, from the theodolites that were used in the 1950s to handheld GPS equipment that became popular in the 1990s to modern high-precision differential GPS systems in use today.

 

Changing horizontal map coordinate systems, from latitude-and-longitude to the imperial system to the metric UTM system.

 

Changing vertical datums, from the North American datum of 1927 to the North American datum of 1983, to the Canadian Geodetic Vertical Datum of 2013.

 

In 2020, NFG conducted a program of verifying historical collar locations using modern drilling survey methods. Of 125 drillholes that were checked, 60 were not located in the field. Of the remaining 65, 43 had significant discrepancies between the modern survey and the collar locations reported in historical records.

 

Uncertainties also exist within some of the drill programs down-hole trajectory surveys which, historically, have usually had their azimuths recorded relative to magnetic north and then corrected to true north using the average magnetic declination for the Queensway area. Currently the magnetic declination in the Gander area is approximately 18°W; when NALCO drilled in the mid-1950s, it was approximately 30°W. Although down-hole surveying could be done well at any time in the past 70 years, some of the historical records indicate that certain projects assumed that the magnetic declination had not changed from older studies when, in fact, it drifts by about 1° every five years.

 

Uncertainties related to assay information arise largely from the lack of information on the methods used for sample selection and preparation, on the analytical methods and on the quality assurance and quality control (QA-QC) procedures. There are few QA-QC studies implemented prior to 2000, when about one-third of the historical holes were drilled.

 

For the post-2000 drilling, including the LabGold drilling, the assays were completed at independent commercial laboratories using the fire assay method and modern QA-QC programs were in place including standard Certified Reference Materials, blank, and duplicate samples.

 

It is the opinion of the QP that data from historical drilling is useful for assisting with the selection of future drill targets. The data from holes that were well located, contain QA-QC information, and are validated by the Issuer could be useful in potential future resource estimations.

 

1 November 2024

  67 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

6.3 Historical Mineral Resource and Mineral Reserve Estimates

 

In 1994, Gander River Minerals optioned the Knob property, including the Knob prospect in the southwestern portion of Queensway North block, from Noranda Exploration. Subsequent drilling by Gander River Minerals enabled a historical mineral resource estimate that was included in a 1994 assessment report filed by Gander River Minerals (Geofile Report 002D_0296; Sheppard, 1994).

 

The historical mineral resource estimate is referenced here for the readers benefit only. The Sheppard (1994) mineral resource is not compliant with current CIM definition standards and best practice guidelines (2014, 2019). The QP has not been able to verify the historical resource estimate, and therefore the QP, and NFG, do not regard the historical estimate as a current mineral resource estimate.

 

1 November 2024

  68 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

7 Geological Setting and Mineralization

 

7.1 Regional Geology

 

Newfoundland lies in the Appalachian orogen, which extends from Scandinavia in the north to Georgia, U.S., to the south (Figure 7.1 and Figure 7.2; van Staal and Barr, 2012). The Orogen provides a cross-section and record of the formation and destruction of the Pre-Cambrian to early Paleozoic Iapetus Ocean which took place over 5 orogenic events that included the:

 

1. Taconic orogeny (500-455 Ma)
2. Penobscot orogeny (485-478 Ma)
3. Salinic orogeny (430-425 Ma)
4. Acadian orogeny (420-390 Ma)
5. Neoacadian orogeny (390-350 Ma; (Colman-Sadd et al, 1992; van Staal et al, 1998; Pollock et al, 2007; van Staal and Barr, 2012; Honsberger et al, 2022).

 

The Appalachian orogen (325-260 Ma) contains the vestiges of the Early Paleozoic Iapetus Ocean, which formerly separated the Laurentian and Gondwanan continents, and formed during collision events that created the super-continent, Pangaea. The tectonostratigraphic setting is divided into four litho-tectonic facies, from west to east - the Humber, Dunnage, Gander, and Avalon zones based on structural, faunal, geochronological, and stratigraphic relationships (Figure 7.3). The Queensway Property is in the Dunnage (mainly) and Gander zones, as described in the text that follows.

 

The Gander Zone is defined by distinct poly-deformed, middle Cambrian to Tremadocian quartz-rich metapsammites and metapelites of the Gander Group which represent the continental margin sediments of Ganderia (Figure 7.3; van Staal and Barr, 2012). Ganderia is interpreted to be a small ribbon continent that rifted from Gondwana during the middle Cambrian. Gander Zone rocks are mostly restricted to the Meelpaeg, Gander Lake and Mount Cormack subzones in the Newfoundland Appalachians (Williams et al, 1988). Parts of the Queensway property is underlain by Gander Lake and Mount Cormack Subzone rocks.

 

The Dunnage Zone consists of a collage of Cambro-Ordovician ophiolitic, intra-oceanic arc, back arc and associated marine sedimentary rocks of both Laurentian and Gondwanan affinity (Figure 7.3). The zone is sub-divided into the Notre Dame (Peri-Laurentian) and Exploits (Peri-Gondwanan) subzones based on differences in their geologic/structural evolution, fauna, and isotopic characteristics (van Staal and Barr, 2012). The Mekwe’jit Line (former Red Indian Line) is a major, late Ordovician suture which separates the Notre Dame Subzone in the west from the Exploits Subzone to the east (Williams, 1978). Most of the Queensway Property lies in the Exploits Subzone of the Newfoundland Appalachians.

1 November 2024

  69 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 7.1 Regional distribution of the main lithotectonic elements of the Appalachian-Caledonian mountain belt in an Early Mesozoic restoration of the the North Atlantic region (van Staal and Barr, 2012).

 

 

 

 

Figure 7.2 Correlation of major suture zones across the Atlantic (from Pollock et al., 2007). Abbreviations of suture zones in the vicinity of the Queensway Property include: BBL - Baie Verte-Brompton Line; RIL - Mekwe’jit Line (formerly Red Indian Line); DBL - Dog Bay Line; GRUB - Gander River Ultramafic Belt; DHF - Dover-Hermitage Fault.

 

 

 

1 November 2024

  70 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

Figure 7.3 Newfoundland’s Bedrock geology and major tectonic zones (from Williams, 2004).

 

 

1 November 2024

  71 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Tectonic Development from Middle Cambrian to Early Carboniferous within the Queensway Property Exploits Subzone and its Ganderian Substrate is discussed in the text that follows.

 

Middle Cambrian to Late Ordovician

 

Arc, back arc and related sedimentary rocks of the Exploits and Gander subzones were built on Neoproterozoic to early Cambrian arc rocks like the Cripple Back Lake Intrusive Suite of Gondwana (Figure 7.4; Rogers et al, 2006). Initial middle-late Cambrian eastward subduction beneath Gondwana initiated Penobscot Arc magmatism (approximately 515Ma Tally Pond Group; Rogers et al, 2006). Continued subduction and steepening of the down-going slab resulted in back-arc extension via slab roll back (Figure 7.4; Van Staal and Barr, 2012). This caused northwestward migration of the Penobscot Arc and separation of the Ganderian microcontinent (Ganderia) from Gondwana opening the Rheic Ocean (509-501Ma; Van Staal and Barr, 2012). Continued extension and subsequent rifting of Ganderia formed the Penobscot back arc basin (500-490 Ma; Van Staal and Barr, 2012). A prism of continental margin sediments (Gander Group, O’Neil, 1987) was deposited on the passive margin of the Penobscot back arc basin coeval with arc magmatism (Van Staal and Barr, 2012). Subsequent shallowing of the east-dipping slab placed the arc and back arc under compression and obducted back arc oceanic crust (Gander River Ultramafic Belt, GRUB) onto the Ganderian margin during Penobscot orogenesis (486-478Ma - Colmann-Sadd et al, 1992). Penobscot Arc magmatism shut off during this time.

 

Continued eastward subduction renewed Victoria Arc magmatism (approximately 478-458 Ma) which was built on remnants of the Penobscot Orogen (Figure 7.4; Van Staal et al, 1996). Progressive slab steepening during eastward subduction-initiated rifting in the Victoria arc and formation of the Exploits back arc basin (Figure 7.5; approximately 473-455 Ma; Van Staal and Barr, 2012). Middle Ordovician, shallow to deep marine rocks (Davidsville Group) were deposited on the eastern passive side of the basin disconformably over rocks of the Penobscot Orogen (O’Neil and Blackwood, 1989; Colman Sadd et al, 1992). The Exploits back arc basin widened until the late Ordovician collision of the Victoria arc with composite Laurentia along the Mekwe’jit Line (approximately 455 Ma Taconic 3 Orogeny; Van Staal and Barr, 2012). The Exploits Subzone subsided and a large blanket of Sanbian-Katian (late Ordovician) black shale (Main Point Formation) was deposited across its entirety (Currie, 1995; O’Brien, 2003).

 

Late Ordovician to Middle Silurian

 

The collision and amalgamation of the Victoria Arc to composite Laurentia initiated westward subduction and closure of the Exploits Back Arc Basin (Figure 7.5; Pollock et al, 2007; Van Staal et al, 2014). Subduction sparked east-facing Salinic arc magmatism (approximately 446-435Ma; Whalen et al, 1996) and marine fore arc sedimentation (Katian-Llandovery Badger Group: O’Brien, 2003) in composite Laurentia (Van Staal et al, 2014).

1 November 2024

  72 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 7.4 Middle Cambrian to early Ordovician tectonic development of the Exploits Subzone. Modified after van Staal et al. (2009).

 

 

 

1 November 2024

  73 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 7.5 Early to middle Ordovician to early Silurian tectonic model for the Exploits Subzone. Modified after Van Staal (2017).

 

 

1 November 2024

  74 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Components of the Exploits back arc basin (middle to late Ordovician Duder Complex) accreted to the forearc region during the early Silurian and initiated inversion of the Badger Group rocks (430 Ma Joey’s Cove Melange; van der Pluijm, 1986; Lafrance and Williams, 1992). This coincides with early Salinic Orogenesis (Figure 7.6; Van Staal et al, 2014).

 

Middle to Late Silurian

 

A molasse sequence (Silurian Botwood Group) was unconformably deposited over deformed Badger Group rocks in composite Laurentia (Zagorevski and Rogers, 2008). This is coeval with carbonate/siliciclastic sedimentation (Silurian Indian Islands Group; Currie, 1995) deposited conformably over the Davidsville Group in Ganderia (Van Staal and Barr, 2012). These rocks are spatially-temporally related to magmatism linked to break-off of the Ganderian plate during the Salinic convergence (e.g. Mount Peyton Intrusive Suite; Williams et al, 1993).

 

A study by Van Staal et al. (2014) suggests the Botwood and Indian Islands group rocks formed in two distinct depocenters of contrasting affinity coeval with Salinic Orogenesis. They propose that the two basins amalgamated along the Dog Bay Line during the final stages of deformation. It was concluded that terrestrial red bed sedimentation (Ten Mile Lake Formation) crossed the Dog Bay Line at approximately 420 Ma marking the end of the Salinic Orogeny (Van Staal et al, 2014).

 

A more recent study in Central Newfoundland near the Valentine and Wilding Lake gold deposits presents an alternative interpretation (Figure 7.6; Honsberger et al, 2022). Collision of Ganderia to composite Laurentia during the Salinic Orogeny caused slab rollback/break-off initiating post-Salinic extension. Extension, rather than continued Salinic shortening, is responsible for Silurian sedimentation in composite Laurentia (422Ma Rogerson Lake Conglomerate) and non arc magmatism in their study area (Honsberger et al, 2022). The extensional phase is likely time-transgressive and older rocks (approximately 429 Ma Charles Lake Volcanic Belt) of the Botwood Basin closer to the Queensway property in north-central Newfoundland likely formed through similar processes (Honsberger et al, 2022). This interpretation did not include Indian Islands Group rocks, but they may have formed through similar processes (Sandeman, personal communication, 2023).

 

Late Silurian to Early Carboniferous

 

Post Salinic extension was followed by Acadian orogenesis which resulted from the collision of a Gondwanan-derived microcontinent, Avalonia, with composite Laurentia along the Dover Fault through continued westward subduction (Figure 7.6; Van Staal et al, 2014). This caused widespread deformation and plutonism across most of the Newfoundland Appalachians between approximately 420-390 (Van Staal et al, 2014; Honsberger et al, 2022).

1 November 2024

  75 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

Figure 7.6 Early to middle Ordovician to early Silurian tectonic model for the Exploits Subzone. Modified after Van Staal (2017) and Honsberger et al (2022).

 

 

 

 

 

 

1 November 2024

  76 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 7.7 Bedrock geology of the Queensway Area (modified from Colman-Sadd et al., 1990).

 

 

1 November 2024

  77 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

The Acadian Orogeny in Newfoundland is characterized by northwest directed folding and thrusting responsible for the inversion of the La Poile Basin (420 Ma; O’Brien et al, 1991), thrusting of the Meelpaeg metamorphic nappe along the Victoria Lake Shear Zone (VLSZ); (417 Ma; Valverde-Vaquero and van Staal, 2001) and the main folding event in the Indian Islands Group (415-410 Ma; McNicoll et al, 2006). Mineral deposits such as Calibre Mining’s Valentine Lake, Beaver Brook Antimony and Cantera’s Wilding Lake deposits of the Exploits Subzone are linked to Acadian Orogenesis (Sandeman et al, 2018; Honsberger et al, 2022).

 

Neo Acadian Orogenesis resulted from the collision of the Gondwanan-sourced Meguma terrane with composite Laurentia (including Avalonia) during the final closure of the Rheic ocean from 390-350Ma (Van Staal and Barr, 2012). In the Newfoundland Appalachians, the effects of Neo Acadian deformation are not thoroughly compiled and discussed. However, it is thought that gold deposits such as the Titan Gabbro and Leprechaun Pond likely formed during the Neo Acadian Orogeny (Sandeman et al, 2022).

 

7.2 Property Geology

 

7.2.1 Geology

 

The Queensway Property constitutes a poly-deformed fold and thrust belt that overprints Ordovician ophiolitic and marine carbonate/siliciclastic rocks, Silurian shallow marine/ terrestrial sequences, and Silurian magmatic rocks (Figure 7.7; Coleman-Sadd et al, 1992; McNichol et al, 2006; Sandeman et al, 2018). The Appleton and Joe Batt’s Pond faults (AFZ and JVPFZ) are major structures that transect the belt and are spatially associated with epizonal-gold mineralization. Sandeman and Honsberger (2023) propose three evolutionary models for the faults as follows: 1) east-vergent back thrusts; 2) late normal faults; or 3) overturned west-vergent thrusts reactivated as a normal fault.

 

The Appleton Fault’s hangingwall and footwall have contrasting rock-types and structural style. The following text briefly describes the distribution and spatial relationships of the various rock types in the AFZ footwall and hanging wall domains.

 

7.2.1.1 Appleton Fault: Footwall Domain

 

Most of the Queensway Property resides between the Appleton Fault footwall and the GRUB Line (Figure 7.7). Easternmost exposures are characterized by the Gander River Ultramafic Complex (GRUC; O’Neil, 1990). Rocks include peridotite, pyroxenite, tonalite, serpentinite, talc, mafic volcanics and mafic derived volcaniclastics (e.g. Blackwood, 1982). Its structural base is flanked against Gander Group rocks to the east along the GRUB Line. GRUC rocks are unconformably overlain to the west by shallow to deep marine rocks of the Middle Ordovician Davidsville Group (e.g. Blackwood, 1982; Sandeman et al, 2018). These rocks consist of fossiliferous sandstone/limy siltstone, conglomerate, greywacke, siltstone, and mudstone (Blackwood, 1982).

 

1 November 2024

  78 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

7.2.1.1 Appleton Fault: Hangingwall Domain

 

Westernmost exposures between the Appleton Fault and the Dog Bay Line are more diverse and structurally complex (Figure 7.7). The Main Point Formation, Badger Group equivalent rocks (uncertain relationship), Indian Islands Group, and Ten Mile Lake Formation are imbricated with the Davidsville Group (Sandeman and Honsberger, 2023). The Main Point Formation includes deep-marine graphitic shales and mudstone seated above the Davidsville Group (Currie, 1995; Sandeman and Honsberger, 2023). Recent studies suggest Badger Group-equivalent rocks (conglomerate, sandstone/greywacke, siltstone/mudstone) overly the Main Point Formation (Sandeman and Honsberger, 2023). These rocks are overlain by Silurian shallow marine to terrestrial rocks of the Indian Islands Group (limestone, siltstone, micaceous sandstone) and Ten Mile Lake Formation (micaceous sandstone and siltstone). The projected trace of the Dog Bay Line and Indian Islands Group/Ten Mile Lake Formation are spatially associated with mafic, intermediate, and felsic intrusive rocks of the Mount Peyton Intrusive Suite (Williams et al, 1993).

 

7.2.2 Preliminary Stratigraphic Framework and Lithological Descriptions

 

A preliminary stratigraphic column, summarized in Figure 7.8, was developed through integrated work conducted by NFG and recent studies by Sandeman and Honsberger (2023). Gold bearing veins in the main deposit area are hosted in the Hunt’s Cove and Outflow formations of the Davidsville Group and the Main Point Formation. Interpretation of structure and lithology on a north-facing cross-section through QWN block is presented in Figure 7.10.

 

7.2.3 Mineralization - Overview

 

The spatial relationships between rock type, the AFZ and JBP fault zones, and known and drill-defined gold showings in the QWN block is presented in Figure 7.9.

 

Gold mineralization at the Queensway Property typically occurs as coarse grains of free visible gold in multiphase quartz-carbonate veins that are brecciated, massive-vuggy, laminated, or that have a closely spaced stockwork texture (Figure 7.11).

 

Arsenopyrite (AsFeS) is commonly observed to occur in conjunction with gold (Figure 7.12). Boulangerite (Pb5Sb4S11), a lead-antimony sulfosalt, is often associated with chalcopyrite (CuFeS2) in intervals of high-grade gold mineralization, however, it is much less common than arsenopyrite. Disseminated host rock pyrite/arsenopyrite mineralization is spatially associated with veining (Figure 7.12).

 

High-grade gold mineralization, above 10 ppm Au, typically occurs in closely spaced quartz veins associated with fault and fracture zones. High-grade gold mineralization has not been observed outside of the main vein arrays. The orientation and distribution of gold-bearing veins on the Queensway Property is presented in Figure 7.13. The quartz vein textures, and mineral associations are interpreted to be indicative of an orogenic epizonal gold system.

1 November 2024

  79 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 7.8 Stratigraphic column describing the rocks underlying the Queensway Property (NFG, 2024; Modified after Sandeman and Honsberger, 2023).

 

 

 

1 November 2024

  80 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 7.9 Integrated geological map of lithology, shear zones and gold showings in Queensway North block. The VOA Option Agreement Licences are outlined in black.

 

 

1 November 2024

  81 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 7.10 Interpretation of structure and lithology on a north-facing Queensway North block cross-section (Source: NFG, 2024).

 

1 November 2024

  82 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 7.11 Typical gold-bearing quartz vein styles observed at Queensway (Source: NFG). Top Left: Brecciated quartz vein with visible gold, Top Right: Vuggy quartz vein with visible gold, Bottom Left: Multiphase quartz vein with visible gold, Bottom Right: Stylolitic quartz vein with visible gold.

 

 

 

 

Figure 7.12 Images of core from mineralized intervals in drillhole NFGC-19-01 (Source: NFG).

 

 

 

1 November 2024

  83 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 7.13 Plan map of the area between the Grouse and Everest prospects, illustrating the complex network of brittle fault zones and associated high-grade gold veins adjacent to the AFZ (Source: NFG).

 

 

 

1 November 2024

  84 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Gold-bearing quartz veins occur in brittle faults with varying orientations that are most commonly discordant to the regional northeast trending foliation and stratigraphy. High-grade gold domains are controlled by the intersection of cross-cutting faults and their vein constituents. Dominant orientations for both vein sets and high-grade shoots have been recognized and are important interpretations for exploration targeting.

 

7.2.4 Alteration

 

A visually subtle hydrothermal alteration is present around the gold-bearing veins at the Queensway Property. The alteration is defined by a weak discoloration of the rock adjacent to quartz-carbonate veins, extending 2 to 10 m beyond the veins themselves. NFG uses hyperspectral core logging to identify a consistent alteration halo around the mineralized zones.

 

A schematic cross section that illustrates a zonation in the alteration moving outward from a gold-bearing stockwork is presented in Figure 7.14 and is characterized by:

 

Aluminum rich NH4 muscovite occurs near the gold mineralization.

 

Transitions to phengite, a mineral that commonly occurs with hydrothermal alteration. Most prevalent distally from a mineralized zone.

 

Outer Fe and Fe-Mg chlorite alteration.

 

NFG continues to investigate methods for quantitative assessment of the alteration to better vector and target au-bearing vein systems on the Queensway Property.

 

7.2.5 Structure

 

Personnel from GoldSpot integrated geophysics, historical mapping, and reconnaissance field studies to develop a deformational framework for the Queensway Property. This is summarized below:

 

1. D1A: Northeast plunging, tight to isoclinal folding with an axial planar S1 cleavage. Injection of bedding-parallel barren quartz-carbonate-chlorite veins (Figure 7.15).

 

2. D1B: East-northeast striking dextral (e.g. Keats Main) and northwest striking sinistral (e.g. Golden Joint) conjugate strike-slip faults (Figure 7.16).

 

3. D2: west-northwest and northwest striking conjugate shear bands and associated steeply northwest and southeast plunging kink folds. Formation of a northwest striking S2 foliation (Figure 7.17).

1 November 2024

  85 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 7.14 Schematic illustration of mineralogical changes in white micas identified by hyperspectral imaging of core near strong gold mineralization (from Srivastava, 2022).

 

 

 

 

 

 

Figure 7.15 Left: stereographic plot with D1 structural measurements taken from Queensway North. Right: Schematic cross-section illustrating the S1 and S0 parallel fabrics and an upright isoclinal fold (Source: GoldSpot).

 

 

 

1 November 2024

  86 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure: 7.16 Left: Stereographic plot with late D1 structural measurements taken from Queensway North. Right: Schematic plan map illustrating conjugate shear orientations (Source: GoldSpot).

 

 

 

 

 

 

Figure 7.17 Left: Stereographic plot illustrating the orientation of D2 structures. Right: Schematic depicting the geometry of D2 structures (plan view) (Source: GoldSpot).

 

 

 

 

 

7.3 Mineralized Zones

 

NFG’s exploration programs, supplemented by historical work, has identified several mineralized gold zones in QWN and QWS blocks (Figures 7.18 to 7.20). The gold zones are characterized by:

 

Strong gold mineralization in quartz-carbonate veins associated with complex networks of brittle fault zones aligned with regional deformation zones.

1 November 2024

  87 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

A gold association with arsenic-bearing minerals, in addition to antimony and tungsten.

 

An alteration halo around most of the gold-rich veins that is associated with the changes in the mineralogy of white micas.

 

These include:

 

1. The northern part of the AFZ in QWN (Figures 7.18 and 7.19), where the fault zone exploits the contact between a black shale interbedded with grey siltstone and greywacke in the west and a sequence of interbedded shale and greywacke in the east. Along the 9.5 km length of this mineralized zone, surface reconnaissance and trenching has established over 20 prospects, 19 of which have been drilled by NFG, including Keats, which is the most extensively drilled of the Queensway prospects.

 

Mineralization is hosted in a network of brittle faults adjacent to the AFZ and crosscutting the NE-striking stratigraphy. These faults and associated gold-bearing vein arrays tend to strike approximately E-W or N-S and have moderate to steep dips. The full down-dip depth has not yet been established along the entire trend but is at least 450 m as defined by drilling at the Keats prospect.

 

2. The northern part of the JBPFZ in QWN, from Gander Lake to north of H-Pond, located approximately 5 km east and running parallel to the AFZ (Figures 7.18 and 7.19). Along the 12.5 km strike length of this zone, surface reconnaissance and trenching has established 10 prospects, 5 of which have been drilled by NFG.

 

Mineralization is hosted in ductile, brittle deformation zones and associated irregular vein arrays that run parallel to the SW-striking, steeply west-dipping stratigraphy. Currently, the down-dip depth is not established along the trend but is at least 150-200 m as defined by drilling at the Pocket Pond and 1744 prospects.

 

3. A series of gold prospects located on along the AFZ in the QWS Block (Figure 7.20) that include:

 

a) Mineralized shear zones with gold associated with quartz veining and accessory sulphide minerals in greywacke and siltstone that is locally analogous to the gold discoveries made along the AFZ at QWN (e.g., Nebula, Devil’s Trench, Devils Pond South, Camp),

 

b) Gold hosted in siltstone that is intruded by a swarm of diorite-gabbroic dykes that has not been recognized at QWN (e.g., Astronaut, Nova, Goose), and

 

c) Epithermal fault zone gold mineralization defined sinter and hydrothermal breccia (e.g., Aztec).

1 November 2024

  88 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 7.18 Gold prospects and zones within the Queensway Property. Detailed prospects are presented for Queensway North and Queensway South blocks in Figure 7.19 and 7.20.

 

 

1 November 2024

  89 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 7.19 Gold prospects and zones within the Queensway North Block.

 

 

1 November 2024

  90 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 7.20 Gold prospects and zones within the Queensway South Block.

 

1 November 2024

  91 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

 

7.4 Definition of the Appleton Fault Zone Mineralized Envelope

 

While significant untested gaps still exist, NFG has defined a 6 km long mineralized strike area along the AFZ within NFGs QWN block called the Appleton Fault Zone Mineralized Envelope (New Found Gold Corp. 2023p). The strike length and gold prospects associated with the Appleton Fault Zone Mineralized Envelope are presented in Figures 7.21 and 7.22.

 

While further exploration work is required to validate the true strike extent of the mineralized zone, points to support designation of the Appleton Fault Zone Mineralized Envelope include:

 

NFG’s most significant gold intercepts in the Queensway Project occur within the QWN block where drilling has identified numerous gold zones that collectively include the Keats, Keats North, Cokes, Iceberg, Iceberg East, Iceberg Alley, Keats West, Road, Golden Joint, Dome, Lotto, Monte Carlo, Lotto North, Jackpot, Honeypot, K2, Everest, Knob, Grouse, and TCH prospects (Figures 7.21).

 

The 2022-2024 discoveries of the Monte Carlo, K2, and Everest prospects potentially expands the contiguous nature of the AFZ mineralized zone in the QWN block.

 

Mineralized zones have been discovered on the east and west sides of the AFZ such that the associated fault damage zone has an apparent width extent of 400 m, or 200 m on each side of the AFZ and in certain places extends 500 m outward from the fault (Figure 7.21).

 

Mineralized zones have been drill validated along offshoot faults associated with the AFZ. For example, the Iceberg and Iceberg East prospects are associated with the KBFZ, which splays outward in a northeast direction from the AFZ (Figure 7.21).

 

The mineralized zones remain open at depth and minimal drilling has occurred below 200 vertical metres (Figure 7.22).

 

 

1 November 2024

  92 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 7.21 Gold mineralization and prospects along the Appleton Fault Zone Mineralized Envelope (Source: NFG, 2024).

 

 

 

1 November 2024

  93 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 7.22 Cross section across the Keats West, Keats North, and Iceberg prospects. Source: New Found Gold Corp. (2023p).

 

 

1 November 2024

  94 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

8 Deposit Types

 

The Queensway Gold Project is classified as an orogenic gold deposit, a deposit type that occurs throughout the world and includes some of the richest known gold deposits (Gardner, 2021). Canadian orogenic gold deposit examples include 1) Campbell-Red Lake district, northern Ontario, 2) Porcupine-Destor Fault Zone, Timmins, Ontario, and 3) Cadillac-Larder Lake Fault Zone, eastern Ontario and Val d’Or mining district, Québec.

 

8.1 Orogenic Gold Deposits

 

Orogenic gold deposits are understood to be created during continental plate collisions, when pressures and temperatures cause rocks to undergo metamorphism and dehydrate (Goldfarb et al., 1991). Gold-bearing fluids are driven from the rocks and percolate through fissures and cracks. As these fluids migrate upwards, their temperature and pressure drop, causing gold, which is hard to keep in solution, to precipitate, often within quartz veins (Fyfe and Henley, 1973; Goldfarb et al., 2015).

 

Conditions that cause gold to precipitate from fluids can occur deep in the crust, where temperatures and pressures are high, and the rocks are ductile (Figure 8.1). At depths of 20 km or more, metamorphism is described as granulite facies. Orogenic gold deposits can also form closer to the surface, where rocks are brittle and metamorphism is weaker, in the greenschist facies. The brittle or ductile nature of the host rock and the intensity of metamorphism give rise to different styles of gold mineralization in orogenic gold deposits, with different associated minerals (Goldfarb et al., 2015). The style of mineralization observed at Queensway, with arsenic, antimony and tungsten often being associated with gold, is consistent with greenschist facies metamorphism at depths that are described in the technical literature as being epizonal to mesozonal.

 

The geological setting and the style of gold mineralization observed at Queensway are like those reported for the Meguma Supergroup, in Nova Scotia, Canada (Kontak et al., 1990; Ryan and Smith, 1998). As shown in Figure 8.2, NFG has also noted striking similarities between drill core samples from Queensway and core from the Fosterville Mine in the Castlemaine - Bendigo region in Australia (Willman, 2007).

 

The QP has been unable to verify the information in this section related to other company’s projects surrounding the Queensway Property, and therefore, the information is not necessarily indicative of the geology or mineralization on the Property that is the subject of this technical report.

 

8.2 Deposit Type Exploration Strategies

 

Exploration strategies for orogenic quartz-vein-hosted gold mineralization deposits involve bedrock and structural mapping, geophysical surveys, geochemical/heavy mineral analysis of till samples, and geochemical analysis of grab rock and trench channel samples. Target areas are then tested by diamond drill programs.

1 November 2024

  95 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 8.1 Schematic for orogenic gold deposits at various depths (modified from Goldfarb et al., 2015).

 

 

Figure 8.2 Comparison of drill core samples from Queensway drillhole NFGC-19-01 with core from the Eagle Zone of the Fosterville Mine, Australia (Source: NFG, 2024). The QP has been unable to verify the information in this section related to other company’s projects surrounding the Queensway Property, and therefore, the information is not necessarily indicative of the geology or mineralization on the Property that is the subject of this technical report.

 

 

1 November 2024

  96 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Regional exploration is typically driven by the identification of first order regional-scale structures and related subsidiary fault-structures, as suggested by geophysical and core logging interpretations. Surface mapping and optical televiewer images allow planning of new drillholes to consider information on the geometry of gold-bearing quartz veins and fault zones, with hole collars and orientations designed to intersect planar gold-bearing structures.

 

1 November 2024

  97 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

9 Exploration

 

Historical exploration results from companies and individual prospectors other than NFG are presented in Section 6. Between 2016-2018 and 2020-2024 NFG conducted a variety of ground exploration programs that collectively included prospecting (Section 9.2), till sampling (Section 9.3), soil sampling (Section 9.4), trenching (Section 9.5), channel sampling (Section 9.5), geological mapping, geophysical surveys (Section 9.8) and satellite imagery (Section 9.10). Section 9.1 provides an overview of exploration activities by NFG since 2016.

 

9.1 Historical Overview of New Found Gold Exploration Programs

 

In 2016, NFG initiated gold exploration at the Queensway Project with a till sampling program along a portion of the Joe Batt’s Pond Fault Zone (JBPFZ) in Queensway North (QWN). In 2017, NFG conducted regional prospecting and trenching along the JBPFZ following up on results from the initial till program, leading to the discovery of the 1744-Glass gold prospect. Other exploration studies included a detailed geological/structural study of the trenched areas, and an electromagnetic and magnetic airborne geophysical survey.

 

In 2018, exploration work included an interpretation of the newly acquired geophysical data (contracted to GoldSpot), a regional and detailed geological/structural study focused primarily in QWN (contracted to GoldSpot), regional prospecting and trenching along the JBPFZ in QWN, and regional till and targeted soil surveys at Queensway South (QWS). Satellite imagery was collected over the project area in late spring and early summer of 2018.

 

In 2019, limited exploration was conducted while a project-wide review of data was done in preparation for NFG’s first drilling program. In the fall of 2019, a culvert was replaced, and roads were upgraded between North and South Herman’s Pond along the Appleton Fault Zone (AFZ) to improve the ability of diamond drill rigs to access the area. The first diamond drilling conducted by NFG occurred in late fall of 2019 (see Section 10).

 

In 2020, exploration work included detailed till sampling programs in conjecture with regional prospecting at QWS and Twin Ponds (TP), resampling and mapping of historic gold showings around Greenwood Pond and Paul’s Pond at QWS, regional geological/structural mapping at QWS, and a trenching program focused along the AFZ at QWN, which led to the discovery of the Golden Joint Hanging Wall (formerly EllieAnna) gold showing. One additional trench was dug at QWS near Eastern Pond. An airborne geophysical survey (gravity) was conducted over QWN in early 2020.

 

In 2021, NFG conducted further detailed prospecting along underexplored segments of the AFZ and JBPFZ at QWN, leading to the discovery of the Big Dave gold-in-float showing. Other exploration work included regional prospecting, focused on the underexplored southern extents of QWS, till sampling along the northern segment of the JBPFZ at QWN and in various areas at QWS. Targeted soil surveys took place along the AFZ at QWN and Eastern Pond Brook at QWS in addition to trenching programs targeting various areas at QWS. Other exploration studies include an electromagnetic magnetic HELITEM2 airborne geophysical survey (contracted to CGG) over newly acquired licenses, a LiDAR and photogrammetry survey at QWN (contracted to RPM), hyperspectral satellite imagery covering a portion of QWS and further interpretation of the 2017 electromagnetic and magnetic airborne geophysical survey.

1 November 2024

  98 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

In 2022, exploration work included detailed prospecting and soil surveys over several areas in QWS, a regional till survey and prospecting over the Narrows area at QWS, and trenching accompanied by detailed geological/structural mapping of the trenched exposures in various areas at QWS. This exploration program at QWS led to the discovery of Bernard’s Pond area including the Devil’s Trench South gold showing which was subsequently drill-tested later in 2022. Other exploration studies included a regional geological/structural mapping study focused on the shorelines of Gander Lake and an interpretation of the 2021 hyperspectral satellite imagery (contracted to Perry Remote Sensing LLC).

 

In 2023, NFG conducted regional and targeted prospecting over newly acquired licenses (Fourth Pond, Twin Ponds, and Ten Mile Lake areas as part of the VOA option) and other underexplored areas at QWN. Prospecting also targeted segments of the GRUB Line in the east at QWN. Other exploration activities included targeted prospecting in QWS, this work covered the underexplored and remote areas of Golden Elbow and Dead Wolf Brook. Detailed soil surveys were also completed over the northern segment of the AFZ at VOA (Fourth Pond area), GRUB Line areas in QWN, and across various regions at QWS. Trenching accompanied by detailed geological/structural mapping covered the northern segment of the AFZ at VOA (Fourth Pond area) and Keats gold prospect at QWN, in addition to various target areas at QWS. Regional geological/structural mapping also targeted various areas at QWN including the King’s Point-Outflow regions along the AFZ, and the region from Logan-Lachlan south to the north shore of Gander Lake along the JPBFZ in addition to the Narrows area at QWS.

 

The exploration program in 2023 led to the discovery of several new areas of gold mineralization in QWS, particularly in the Greenwood Pond and Bernards Pond (e.g. Camp Zone) regions. Surface exploration also identified new showings at QWN along the north shore of Gander Lake/ southern extension of the JBPFZ and Outflow- King’s Point regions along the AFZ. Several geophysical programs were conducted in 2023 and include a regional seismic survey across the AFZ and JBPFZ at QWN (contracted to HiSeis; Section 9.9), ground and drone based magnetic geophysical surveys over Paul’s Pond at QWS (contracted to Pioneer Exploration and Simcoe Geoscience; Section 9.8), and a property wide LiDAR and Orthophoto survey (contracted to Eagle Mapping; Section 9.10). Additional technical studies completed were a geochemical interpretation of 2022 NFG soils (contracted to Heberlein Geoscience), a geomorphology/surficial geology mapping study at QWN (contracted to Palmer) and a 3D inversion (contracted to TechnoImaging) and interpretation of magnetic and electromagnetic data over Golden Elbow at QWS (contracted to Fathom Geophysics).

1 November 2024

  99 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

In January and February of 2024, NFG completed targeted soil surveys over the GRUB Line in QWN and the Transmission Line area in QWS which had started in late 2023. Other exploration studies in early 2024 include a drone-based magnetic survey completed over Greenwood Pond, Camp and Devils Pond South areas in QWS (contracted to Rosor Exploration; Section 9.8).

 

Since NFG’s previous technical report, the Company completed additional exploration in 2024 including rock sampling at QWN and QWS, as well as trenching and channel sampling at the Keats prospect.

 

A summary of surface sampling activities conducted by NFG at the Queensway Property is presented in Table 9.1

9.2 Prospecting and Geochemical Rock Samples

 

NFG’s geochemical rock sampling programs consist of sampling outcrop (in-situ bedrock), subcrop (rock suspected to be close to in-situ) and float (rock that is not in-situ; boulders). In-situ rock with anomalous gold values can lead to direct target areas for future trenching and diamond drilling, whereas anomalous float samples can help define areas of potential gold mineralization with knowledge of glacial ice movement directions. NFG’s rock sampling programs include routine QA/QC samples, represented by control samples inserted into the sample stream every 10 samples, alternating between standards and blanks. For further information regarding sample acquisition, processing, and analyses, see Sections 11.1.3 and 11.3.

 

Figures 9.1 and 9.2 presents the locations of outcrop, float, subcrop, and trench samples collected, color-coded by year and by gold grades above 0.5 ppm Au, respectively.

 

Prospecting activities by NFG began in 2017, with detailed prospecting along the AFZ and JBPFZ at QWN targeting anomalous historic soils, the 2016 NFG tills and historic gold occurrences. Extensive quartz float was noted along the JBPFZ, including several areas of quartz float containing visible gold (VG) and sulfide mineralization.

 

Regional prospecting efforts were also undertaken in Twin Ponds and QWS in 2017, utilizing forest access roads and foot traverses to assess the property potential. Several areas of anomalous gold were discovered at QWS, including near Yellow Fox Brook, East Narrows, south of Paul’s Pond, Pine Tree Hill and Jumbo Brook, and one area in the vicinity of Twin Ponds at QWN.

 

Detailed prospecting continued in 2018 along the AFZ and JBPFZ at QWN targeting anomalous tills and historic gold occurrences, with many samples returning anomalous gold values along these structures. More targeted prospecting was also undertaken in Twin Ponds and QWS in 2018, mainly targeting areas around historic gold showings and new areas of anomalous till defined from the 2018 NFG till survey over QWS. The results from this program included validating and identifying several historic and new gold occurrences near the Narrows, Larsen’s Falls, Paul’s Pond, Eastern Pond and Greenwood Pond areas and the western and southern shorelines of Gander Lake at QWS.

1 November 2024

  100 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Table 9.1 Sampling summary from NFG’s exploration at the Queensway Property.

 

 

 

1 November 2024

  101 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 9.1 Locations of rock samples collected from NFG’s prospecting programs.

 

 

1 November 2024

  102 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 9.2 Locations of surface rock samples with greater than 0.5 ppm Au at the Queensway Property.

 

 

1 November 2024

  103 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Regional prospecting was carried out in conjunction with more detailed till sampling at QWS in 2020, covering areas which hadn’t seen much previous exploration, including areas around Hunt’s Cove and Joe’s Feeder, Eastern Pond, Pine Tree Hill, Larsen’s Falls and near the Great Gull River. Further validation and mapping of historic gold occurrences was also undertaken in the Paul’s Pond and Greenwood Pond areas at QWS. No formal prospecting program was undertaken at QWN in 2020 except for some prospecting targeted around North Herman’s Pond along the AFZ at QWN. This program discovered quartz vein float, which was trenched later in 2020, leading to the discovery of the Golden Joint Hanging Wall (formerly EllieAnna) gold showing.

 

In early 2021, prospecting efforts were focused along the AFZ and JBPFZ at QWN. This program identified high-grade gold float (1,130 and 568 ppm Au; Big Dave showing) north of the Lotto prospect along the AFZ in addition to numerous samples returning anomalous gold values in proximity to the AFZ and JBPFZ. Prospecting was also carried out on the Little Rocky Brook and Bellman’s Pond licenses, although no significant discoveries were made. In QWS, prospecting efforts in 2021 were focused in the poorly understood far southern reaches of the property including Eastern Pond Brook and Great Gull River regions. Although this program did not generate any significant gold targets, an area of extensive quartz float near Eastern Pond Brook was identified.

 

In 2022, prospecting efforts focused on the central region of QWS around known gold occurrences near Paul’s Pond and Greenwood Pond, leading to the discovery of new areas of float and outcrop with anomalous gold values. This included a new area along the shoreline of Paul’s Pond where one of the highest grading samples ever collected in the area was collected (29.6 ppm Au). Other areas of anomalous gold float were also discovered in previously underexplored areas around Camp and Devils Pond South in the Bernards Pond area, and Transmission Line. Prospecting in the Joe’s Feeder area in 2022 also led to the discovery of an outcrop on the southern shoreline of Gander Lake, where high grade gold values were sampled.

 

In early 2023, prospecting efforts were focused on newly acquired licenses (VOA Option) near Fourth Pond, Twin Ponds, Ten Mile Lake, and Outflow areas in QWN. This program did not identify any significant gold targets, but numerous float samples containing anomalous gold values were collected along the northern extents of the AFZ and JBPFZ at the Fourth Pond license. Later in 2023, prospecting covered other areas at QWN including the region around the historic gold occurrence, Jasperoid, in addition to underexplored areas south of the TCH (King’s Point, Outflow, and the Northern shoreline of Gander Lake, near JBPFZ), plus along the GRUB Line. Significant results from this program included the discovery of an area of high-grade gold float with visible gold along the AFZ in the King’s Point-Outflow area (highest grading sample was 175.8 ppm Au) and an area along the northern shoreline of Gander Lake close to the JBP trend where numerous anomalous samples were collected from outcrop (highest grading sample was 12.3 ppm Au).

 

At QWS in 2023, prospecting was conducted over two more remote areas on the property, the geophysical anomaly at Golden Elbow and the historic base metal and silver prospect Dead Wolf Brook. Targeted prospecting was also conducted over gold-in-soil anomalies defined through NFG’s soil sampling programs and in underexplored areas in the central region of Queensway South around Paul’s Pond, Dead Wolf Brook, Bernards Pond. This targeted prospecting led to the discovery of new areas of high-grade gold float north of Bernards Pond (highest grading sample was 479.0 ppm Au) and in the southeast Dead Wolf brook area (two float samples grading 65.0 and 22.1 ppm Au). The cluster of anomalous float material in the Bernards Pond area including the existing showing, Devils Pond South was drill tested in early 2024 and gold mineralization was encountered in drill core. This prospect was subsequently named the Camp Zone.

1 November 2024

  104 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

In 2024, rock prospecting was conducted in both QWS and QWN, with a focus on the new claims areas that the Company recently acquired from Sky Gold and LAB, as well as around the east side of the AFZ in QWN. A total of 123 rock grab samples were collected on Property between April 19 - November 1, 2024, with a highlight including a 12.67 ppm Au float sample collected from the Big Vein area.

 

In 2017, a total of 784 rock samples were collected within the Queensway Property, including:

 

583 rock samples from QWN (429 classified as float and 154 as outcrop).
171 rock samples from QWS (71 float and 100 outcrop).
30 rock samples from TP (4 float, 26 outcrop).

 

In 2018, a total of 509 rock samples were collected within the Queensway Property including:

 

100 rock samples from QWN (46 float, 53 outcrop, 1 trench).
368 rock samples from QWS (132 float and 236 outcrop).
41 rock samples from TP (23 float and 18 outcrop).

 

In 2020, a total of 1,183 rock samples were collected within the Queensway Property, including:

 

119 rock samples from QWN (78 float and 41 outcrop).
1,060 rock samples from QWS (632 float and 428 outcrop).
4 rock samples from TP (3 float and 1 outcrop).

 

In 2021, a total of 1,961 rock samples were collected within the Queensway Property, including:

 

206 rock samples from QWN (129 float, 64 outcrop, 13 subcrop).
1,586 rock samples from QWS (1,187 float, 265 outcrop, 88 subcrop, 36 trench).
163 rock samples from LRB (56 float, 86 outcrop, 20 subcrop).

1 November 2024

  105 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

6 rock samples from BP (3 float, 2 outcrop, 1 subcrop).

 

In 2022, a total of 943 rock samples were collected within the Queensway Property, including:

 

50 rock samples from QWN (3 float, 46 outcrop, 1 subcrop).
891 rock samples from QWS (613 float, 196 outcrop, 66 subcrop, and 16 trench).
2 rock samples from TP (1 float and 1 outcrop).

 

In 2023, a total of 3,514 rock samples within the Queensway Property were collected, including:

 

1,830 rock samples from QWN (906 float, 753 outcrop, 164 subcrop, and 7 trench).
1,322 rock samples from QWS (671 float, 276 outcrop, 54 subcrop and 321 trench).
16 rock samples from TP (7 float, 5 outcrop, 4 subcrop).
340 rock samples from TMDL (150 float, 139 outcrop, 51 subcrop).
6 rock samples from BP (1 float, 5 outcrop).

 

In February 2024, 2 rock samples were collected from QWS (2 float). Subsequent rock sampling was completed from May to August of 2024, where a total of 123 rock samples were collected within the Queensway Property, for a total of:

 

80 rock samples from QWN (18 float, 59 outcrop, and 3 subcrop).
45 rock samples from QWS (2 float, 40 outcrop, and 3 subcrop).

 

Of the 9,019 rock samples collected within the Property between 2017 and the Effective Date of this report (Table 9.1), 9,019 rock samples (100%) have been assayed as of the Effective Date of this report.

 

All 2,968 rock samples collected from QWN (Table 9.1) have been assayed as of the Effective Date of this report. The QPs review of the gold analytical results shows:

 

2,865 analytical results (96.53%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.031 ppm Au.
92 analytical results (3.10%) were between 1.02 and 27.9 ppm Au, with an average of 4.77 ppm Au.
11 analytical result (0.37%) was above 30 ppm Au and consisted of one 1,131 ppm Au sample.

 

All 5,443 rock samples collected from QWS (Table 9.1) have been assayed as of the Effective Date of this report. The QPs review of the gold analytical results shows:

1 November 2024

  106 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

5,248 analytical results (96.42%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.043 ppm Au.
189 analytical results (3.47%) were between 1 and 29.62 ppm Au, with an average of 3.30 ppm Au.
6 analytical results (0.11%) were above 30 ppm Au with a maximum of 479 ppm Au sample (at the Camp prospect).

 

All 93 rock samples collected from TP (Table 9.1) have been assayed. The QPs review of the gold analytical results for the 93 samples assayed shows,

 

87 analytical results (93.55%) were below 1 ppm Au, with a maximum of 0.86 ppm Au and an average of 0.09 ppm Au.
6 analytical results (6.54%) were between 1.22 and 15.79 ppm Au, with an average of 6.13 ppm Au.

 

All 12 rock samples collected in 2023 from BP (Table 9.1) have assay results. The QPs review of the gold analytical results for the 12 samples assayed shows that all analytical results were lower than 1 ppm Au, with a maximum of 0.06 ppm Au and an average of <0.01 ppm Au.

 

All 340 rock samples collected in 2023 from TMDL (Table 9.1) have assay results. The QPs review of the gold analytical results for the 340 samples assayed shows,

 

324 analytical results (95.29%) were below 1 ppm Au, with a maximum of 0.79 ppm Au and an average of 0.04 ppm Au.
15 analytical results (4.41%) were between 1.02 and 13.25 ppm Au, with an average of 3.08 ppm Au.
1 (0.29%) analytical result of 33.70 ppm Au.

 

All 163 rock samples collected from LRB (Table 9.1) have been assayed. The QPs review of the gold analytical results for the 163 samples assayed shows:

 

154 analytical results (94.48%) were below 1 ppm Au, with a maximum of 0.73 ppm Au and an average of 0.06 ppm Au.
9 analytical results (5.52%) were between 1.07 and 7.28 ppm Au, with an average of 2.33 ppm Au.

 

Within the entire Queensway Property, a total of 9,019 rock samples were collected by NFG (Table 9.1). The highest prospecting rock values recorded are 1,131 ppm Au and 568 ppm Au, collected in the Big Dave prospect area of QWN (Figure 9.2).

1 November 2024

  107 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

9.3 Geochemistry - Till Samples

 

Till samples are typically taken in a grid-like pattern and are used as a first pass exploration method to cover a broad area of interest. Analyses on till samples provide the quantity, size, and angularity of gold grains in the till, a gold grade calculated by the gold grain quantity and size, and an assay value for gold and other elements from the heavy metal concentrate (HMC) fraction of the till. Potential bedrock source areas for the gold in till can be identified with knowledge of glacial ice-flow direction, which is northeast across the Queensway Property. Planned till sites were not sampled if not enough till could be collected or no till could be identified (rocky ground, reworked fluvial material, excessive organic material). NFG’s till sampling programs include routine QA/QC samples, represented by a duplicate sample collected approximately every 20 samples.

 

For further information regarding sample acquisition, processing, and analyses, see Sections 11.1.1 and 11.3. Figure 9.3 shows the locations of till samples, colour-coded by year. Figures 9.4 and 9.5 show the locations with abundant gold, either as measured by the count of gold grains (Figure 9.4) or by the gold grade calculated from grain size and grain count (Figure 9.5).

 

The first till samples taken by NFG were in 2016, with a detailed till grid which targeted a segment of the JBPFZ at QWN (Figure 9.3). The results from this initial grid demonstrated the abundance of gold grains and the pristine nature of those grains in till in this area, with an average gold grain count per till of over 100 with the highest being 1744 grains in a single till located along the JBPFZ. Based on this initial success, a regional till grid covering the entire Queensway South Block was completed in 2018, with higher density till samples being collected over a northeast trending magnetic anomaly extending along the western margin of the property. Late in 2018, NFG collected four additional till samples around the till sample containing 1744 gold grains from the 2016 survey along the JBPFZ at QWN.

 

In 2020 and early 2021, a regional till grid was completed over the Twin Ponds area at QWN, and more detailed (tighter spaced) till grids were completed at QWS over areas of anomalous till outlined from the regional 2018 till survey, including Hunt’s Cove/Joe’s Feeder, Narrows, Larson’s Falls, Pine Tree Hill, Eastern Pond, and Great Gull River areas. Later in 2021, two detailed till grids were completed to the North and West of the 2016 till grid over the JBPFZ at QWN to better define the area of anomalous gold. Also in 2021, an additional till grid covering the Little Rocky Brook area at QWN was completed.

 

Till sampling continued in 2022 at QWS in the Narrows area, where one till from this program returned a high gold grain count of 1231 grains. A second round of more tightly spaced till sampling was completed around this highly anomalous till later in 2022, with one of these samples returning a high gold grain count of 199 grains.

 

The site of the anomalous tills was trenched in 2023, where a gold-bearing fault zone in granite was discovered (Mars gold prospect). Drill testing at Mars took place in early 2024.

1 November 2024

  108 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 9.3 Location of glacial till samples at the Queensway Property, colour coded by sampling year.

 

 

 

1 November 2024

  109 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 9.4 Locations of till samples with 10 or more moderate - pristine gold grains.

 

 

1 November 2024

  110 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 9.5 Till samples with gold grades above 1 ppm Au.

 

 

1 November 2024

  111 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

A total of 1,250 till samples have been collected within the Queensway Property as of the Effective Date of this report, and 1,247 samples have been assayed.

 

Of the 272 till samples collected from QWN (Table 9.1), 270 have assay results. The QPs review of the gold analytical results for the 270 samples assayed shows:

 

121 analytical results (44.81%) were lower than 1 ppm Au, with a maximum of 0.996 ppm Au and an average of 0.27 ppm Au.
149 analytical results (54.19%) were between 1 and 30.00 ppm Au, with an average of 5.37 ppm Au.

 

Of the 773 till samples collected from QWS (Table 9.1), 772 have assay results. The QPs review of the gold analytical results for the 772 samples assayed shows:

 

651 analytical results (84.33%) were lower than 1 ppm Au, with a maximum of 0.995 ppm Au and an average of 0.19 ppm Au.
121 analytical results (15.67%) were between 1 and 30.00 ppm Au, with an average of 4.02 ppm Au.

 

All 102 till samples collected from TP were assayed. The QPs review of the gold analytical results for the 102 samples assayed shows:

 

100 analytical results (98.04%) were lower than 1 ppm Au, with a maximum of 0.76 ppm Au and an average of 0.11 ppm Au.
2 analytical results (2%) were 1.06 and 1.72 ppm Au, with an average of 1.39 ppm Au.

 

Of the 103 till samples collected from LRB (Table 9.1), 101 have assay results. The QPs review of the gold analytical results for the 101 samples assayed shows:

 

66 analytical results (65.35%) were lower than 1 ppm Au, with a maximum of 0.996 ppm Au and an average of 0.23 ppm Au.
35 analytical results (34.65%) were between 1.05 and 30.00 ppm Au, with an average of 5.22 ppm Au.

 

9.4 Geochemistry - Soil Samples

 

Soil sampling has been utilized by NFG to define areas of elevated gold and other elements in soil. Soil samples are typically taken in grid patterns, targeting areas of anomalous gold in rocks, tills and structural features interpreted from geophysics, or as a first pass exploration method for an area of interest. To produce more well-defined anomalies, soil sampling grids contain higher sample density than more regional till sampling grids and are often used after areas of anomalous till are defined and where overburden thickness is known to be thinner. Geochemical analyses on soil samples will provide an assay value for gold and other elements, which help NFG to define areas where anomalies in soil might represent what is in bedrock below the overburden. Planned soil sites were not sampled if not enough soil could be collected, or no soil could be identified (excessive organic material or rocky ground). After areas of anomalous soil are identified, further prospecting, trenching and diamond drilling can be used to investigate the bedrock source of the gold in soil.

1 November 2024

  112 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

NFG’s soil sampling programs include routine QA/QC samples, represented by a duplicate sample at the same soil site taken every 20 samples. For further information regarding sample acquisition, processing, and analyses, see Sections 11.1.2 and 11.3.

 

Figure 9.6 shows the locations of the soil sample programs completed by NFG from 2017 to 2023.

 

The first soil samples taken by NFG were in 2017, where two test soil samples were collected in the Joe Batts Pond area at QWN. In 2018, two targeted soil grids were completed over Jumbo Brook and Yellow Fox Brook areas at QWS following up on anomalous float samples. In 2021, one targeted soil grid was completed over the Cokes zone, an area of known gold mineralization at QWN along the AFZ to test for a hyperspectral (HALO device) signature in the soil. Hyperspectral is used to identify alteration minerals associated with gold mineralization in drill core and grab samples and this test was designed to see if the same signatures could be identified in the soil. This initial test showed that alteration mineral signatures (ex. Muscovite) could be collected from soil and thus this method was applied to all NFG soil samples collected afterwards. One additional targeted soil grid was completed in 2021 along the banks of Eastern Pond Brook at QWS.

 

In 2022, seven regional scale soil grids were completed at QWS covering Joe’s Feeder, Transmission Line, Paul’s Pond, Greenwood Pond, and Eastern Pond areas. In 2023 and early 2024, two regional scale soil grids were completed at QWN, including a grid over newly acquired licenses near Fourth Pond (VOA Option), and the other covering the Northern segment of the GRUB Line. At QWS in 2023, five additional soil grids were completed expanding on the 2022 grids at Transmission Line, Paul’s Pond, Greenwood Pond, and Eastern Pond; an additional regional grid connecting all these main soil grids and covering the suspected southern extension of the AFZ was also collected (Figure 9.7).

 

In 2022, 435 soil samples were collected at QWN and 9,648 at QWS (Table 9.1) and for 2023, there were 5,502 soils samples collected from QWN and 9,402 soil samples collected from QWS for a total of 14,904 soil samples. In 2024, as of the Effective Date of this report, a total of 1,385 soil samples have been collected, where 550 soil samples were collected from grids in QWN at the GRUB Line North area, and 835 samples were collected in QWS at the Transmission Line area.

1 November 2024

  113 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 9.6 Locations of soil samples, colour coded by sampling year.

 

 

1 November 2024

  114 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

Figure 9.7 Overview of soil sampling gold analytical results in the Devils Pond South, Camp, Greenwood, Aztec, Goose, Astronaut/Nova, and Nebula prospects area in the Queensway South block (Source: NFG, 2024).

 

 

1 November 2024

  115 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

From 2017 to the Effective Date of this report, a total of 27,518 soil samples have been collected within the Queensway Property, and all soil samples collected were shipped by NFG to analytical laboratories for assay. Of the 27,518 soil samples collected within the Property (Table 9.1), 28,130 received assay results (98%), and assay results for 642 samples are still pending as of the Effective Date of this report. Assay results are presented in Figure 9.8.

 

Of the 6,501 soil samples collected from 2017 to the Effective Date of this report at QWN, all have assay results. The QPs review of the gold analytical results for the 6,501 samples assayed shows:

 

6,499 analytical results (99.97%) were between 0.00005 and 0.947 ppm Au, with an average of 0.008 ppm Au.
2 analytical results (0.03%) of 1.056 and 1.578 ppm Au.

 

Of the 21,017 soil samples collected from 2018 to the Effective Date of this report at QWS, all have assay results. The QPs review of the gold analytical results for the 21,017 samples assayed shows:

 

21,015 analytical results (99.99%) vary between 0.00005 and 0.913 ppm Au, with an average of 0.0060 ppm Au.
2 analytical results (0.01%) of 1.035 and 2.27 ppm Au.

 

9.5 Trenching and Channel Sampling

 

Trenching has been utilized by NFG as a tool to expose bedrock in areas with anomalous gold in float, soil and till samples on surface or to further expose bedrock in areas where anomalous gold was sampled in outcrop. Exposing and mapping bedrock exposures helps NFG to understand the underlying geology and structural trends controlling mineralized systems and is important for producing informed diamond drilling programs targeting these systems.

 

Processing of trench data by NFG typically involves washing the exposed bedrock in the trench with a high-pressure pump and hose, capturing detailed drone imagery of the exposure, collecting highly accurate control point coordinates (using RTK systems) to allow georeferencing of drone imagery, sampling of the exposed rock or mineralized features and mapping the geology and structure of the exposure by NFG geologists. Trenches were immediately reclaimed after digging if no bedrock was encountered (overburden depth too great) or were reclaimed once the exploration process was complete. Locations of trenches at the Queensway Property are presented in Figure 9.9.

1 November 2024

  116 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 9.8 2023 Soil sample gold assay results at the Queensway Property.

 

 

1 November 2024

  117 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 9.9 Location of trenches at the Queensway Property.

 

 

1 November 2024

  118 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Trenched exposures were typically sampled by either chipping rock off the exposure (Grab sample; Section 9.2) or by cutting and removing linear channels of rock using a rock saw (Channel sample). Channel samples were subjected to the same analytical procedures as grab samples but are often preferred as they provide more representative results across an entire exposure as opposed to a grab sample from one targeted area in the exposure. Channel samples can thus provide a gold grade over a length of sampled rock, which is an important measure of the prosperity of a mineralized system and helps to further evaluate whether diamond drilling is warranted at a given target.

 

NFG began trenching in 2017, following up on gold targets generated by prospecting and till sampling along the JBPFZ at QWN completed in 2016 (Figure 9.9, Table 9.1). During this program, twenty-four trenches were dug across 4 general areas along the JBPFZ including in the vicinity of H-Pond, Quartz Pond, west of Joe Batt’s Pond and an area south of the TCH. Fourteen of the sites attempted in 2017 encountered bedrock. In 2018, twelve additional sites were trenched in similar areas to the 2017 program. All sites excavated in 2018 reached bedrock aside from one. The 2017-2018 trench program along the JBPFZ led to the discovery of the Glass gold showing, which was subsequently drill-tested in 2020.

 

In 2020, trenching efforts were mostly focused on the North Herman’s Pond prospect along the AFZ in QWN. During this program, sixteen trenches were dug with half of those targeting historic gold showings (Trench 36, Road, Little and Hornet showings) and the other half targeting areas which had not been trenched previously. Thirteen of the sites attempted reached bedrock. The 2020 trench program and subsequent grab and channel sampling validated the mineralization at the historic Trench 36, Little and Road showings and led to the discovery of the Golden Joint Hanging Wall (formerly EllieAnna) gold showing. Initial drill-testing at Golden Joint, Little, Road and Trench 36 (subsequently renamed K2) were completed in 2020 and 2021. One additional trench was dug at QWS in 2020 near Eastern Pond (Cozak Trench), following up on high-grade float samples in the area. The trench uncovered a quartz veined zone in black siltstone with numerous grab samples returning elevated gold values. The mineralization at Cozak was drill-tested in 2022.

 

In 2021, trenching efforts were focused in various areas at QWS including south of Joe’s Feeder, Greenwood Pond, Camp, Devils Pond South, north of Eastern Pond and in the vicinity of Eastern Pond Brook. A total of sixteen trenches were attempted in QWS in 2021, and 11 of those reached bedrock. The trenching program in 2021 did not lead to any significant gold discoveries but helped NFG gain valuable geological and structural information in previously poorly understood areas.

 

In 2022, further trenching was conducted in different areas at QWS including Transmission Line, Greenwood Pond, Bernards Pond, and Pine Tree Hills. A total of sixteen trenches were attempted at QWS in 2022, and 9 reached bedrock. The trenching program in 2022 led to the discovery of two new gold showings, Devils Pond South and Devil’s Trench. The mineralization at both showings is related to shear zones near the contacts between greywacke and siltstone along the AFZ and drill-testing at both sites was conducted later in 2022. Three trenches dug in the Greenwood Pond area uncovered felsic volcanic rocks cut by stockwork veined zones containing elevated gold values.

1 November 2024

  119 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

In early 2023, four trenches were attempted on a newly acquired license in the Fourth Pond area along the northern segment of the AFZ at QWN (VOA Option) with 3 of those trenches reaching bedrock. These trenches did not lead to any significant discoveries but did provide valuable geological and structural information about this new area which aided in planning a diamond drilling program in the region later in 2023. In the Fall of 2023, a trench was excavated over the Keats gold prospect along the AFZ at QWN (Section 9.6).

 

Forty-four trench sites were attempted in different areas at QWS in 2023 including the Narrows, Transmission Line, Paul’s Pond, SW Gander River, Greenwood Pond, Bernards Pond area and an area east of Eastern Pond, with 36 of those trenches encountering bedrock. The 2023 trenching program in QWS led to the discovery of several new gold showings in various areas. Trenching at a gold-in-till anomaly in the Narrows area uncovered a gold-bearing fault zone in felsic plutonic rocks subsequently named the Mars gold showing. Trenching at a gold-in-soil anomaly in the Transmission Line area identified a fault zone in a sequence of greywacke and siltstone in the Potato Patch trench. Samples taken throughout the trench returned patchy elevated gold values, but several quartz boulders sampled from the overburden during excavation returned high-grade gold values. Trenching at two sites along a linear gold-in-soil anomaly in the Paul’s Pond area led to the discovery of a gold-bearing fault zone in siltstone, subsequently named the Big Bear Trend. Trenching at various gold-in-float anomalies in the Greenwood Pond area uncovered a series of gold-bearing shears hosting a high-density quartz veined zones in mafic and felsic volcanic rocks. The trenching program also validated gold mineralization at many historic gold occurrences around the Paul’s Pond and Greenwood Pond areas. The mineralization at Mars and Potato Patch was drill-tested in early 2024, while many of the other newly discovered and re-exposed historic gold showings have not yet been drill-tested as of the effective date of this report.

 

A total of 829 trench channel samples have been collected with the Queensway Property as of the Effective Date of this report, and all samples have been assayed. Results of the trench channel sampling program at Queensway are presented in Figure 9.10.

 

A total of 3,532 channel samples have been collected from QWN as of the Effective Date of this report, and 3,492 have been assayed. The QPs review of the gold analytical results for the 3,532 channel samples shows:

 

3,006 analytical results (86.08%) were between 0.0005 and 0.99 ppm Au, with an average of 0.15 ppm Au.
412 analytical results (11.80%) were between 1.0 and 29.42 ppm Au, with an average of 5.21 ppm Au.
74

1 November 2024

  120 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 9.10 Channel sample gold assay results (Au ppm).

 

 

1 November 2024

  121 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

A total of 596 channel samples have been collected from QWS as of the Effective Date of this report, and all have been assayed. The QPs review of the gold analytical results for the 596 channel samples shows:

 

563 analytical results (94.46%) were below 1 ppm Au, with a maximum of 0.944 ppm Au, with an average of 0.122 ppm Au.
31 analytical results (5.20%) were between 1.029 and 9.458 ppm Au, with an average of 2.315 ppm Au.
2 analytical results (0.34%) of 51.274 and 42. 428 ppm Au.

 

9.6 Keats Gold Prospect Trench Excavation

 

During August to November 2023, NFG undertook a major excavation effort at the Keats trench where the Company removed overburden to expose a 200 m long by 70 m wide area that roughly corresponds to the known surface expression of the high-grade segment of the Keats-Baseline Fault Zone (KBFZ).

 

Prior to the Keats trench, the Keats Zone had only been observed through drill core and modelled in 3D, forming the basis of the Company’s geological model. Having this exposure will aid in validating the geological and structural models as well as provide detailed insights into the geometry of Keats and the controls on high-grade mineralization.

 

One highlight of this work was unearthing the East-West Vein (E-W Vein) that occurs over a 100 m long surface expression and includes a 25 m segment that hosts significant amounts of visible gold (Figure 9.11; New Found Gold Corp., 2023b). Via NFG drilling, the E-W Vein is intercepted over a strike length of 300 m and down to a vertical depth of 150 m and defines the KBFZ.

 

At the Effective Date of this technical report, a detailed mapping and channel sampling program is being conducted by NFG at the Keats prospect trench. A total of 2,763 channel samples have been collected from the Keats zone trench, with 292 assay results still pending. Highlights from the channel sampling program at the Keats Main trench, as reported by NFG, are listed in Table 9.2 (New Found Gold Corp., 2024m).

 

Since the last exploration update in NFG’s previous technical report, the Company has also initiated surface excavation and trenching at the Iceberg prospect. The trench area corresponds with the projected bedrock surface expression of the Iceberg zone, and a follow up detailed geological mapping and sampling program is planned.

 

1 November 2024

  122 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 9.2 Select channel assay intervals for the Keats Main trench. Intervals are apparent widths. Individual channel intervals of high-grade mineralization are denoted by the term, “Including”.

 

 

 

1 November 2024

  123 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 9.11 Keats trench plan view map with location of visible gold mineralization in the East-West Vein. Source: New Found Gold Corp. (2023b).

 

 

1 November 2024

  124 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

9.7 QP Opinion on Representativity and Potential Bias of Exploration Samples

 

The QP is of the opinion that NFG’s till, soil, rock, and trench channel samples are representative of the regions where the samples were collected. The resulting analytical assay results provide a reasonable dataset of unbiased measurements that represent reasonable surficial rock and trench sample gold grades and/or till and soil gold signatures within the general sample locations.

 

Grab samples, by their very nature, often tend to be anomalous: prospectors are looking for gold and are more likely to find a surface sample interesting if it contains visible gold, or if its visible mineralogy suggests that its gold grade might be high. The likely bias in grab samples is not problematic for exploration, however, because anomalous samples can direct future exploration programs. Due to the bias, the QP recommends that grab samples not be used in any future resource estimations.

 

9.8 Geophysical Surveys

 

By measuring naturally occurring fields produced by the Earth (passive methods) or physical responses derived from artificially produced signals (active methods), geophysical surveys help to identify and understand features of interest in the underlying geology. Physical parameters defined by such surveys such as magnetic susceptibility, conductivity, resistivity, chargeability, and density are related directly to the lithological and mineralogical composition of the survey area. As such, anything from regional prominent bodies to subtle localized anomalies seen in a geophysics dataset can be interpreted with an associated geological rationale. Products derived computationally from a geophysics dataset can be used to filter or highlight features, allowing for interpretation to be done from various perspectives.

 

The process of inversion can also be undertaken to produce 3D models of some physical parameter defined within the survey itself. New Found Gold has successfully used geophysics and these associated products and models to aid in understanding the physical and spatial characteristics of lithological units, progress high level geological and structural interpretations, and to identify and analyze exploration targets.

 

Features of interest across geophysical datasets and their significance to mineral exploration include:

 

Linear breaks in the continuity of the signal or anomalous lineation’s: Most gold prospects on the Queensway property are related to gold-bearing fluids traveling through cracks and fractures in the bedrock to eventually reach an environment favourable for mineralization (orogenic gold). As such, faults and breaks seen across geophysical datasets are considered in conjunction with geological and geochemical datasets and often defined as targets for exploration. Almost all geophysics products will represent major fault to some degree, with more subtle feature often identified in subsequent computationally derived products.

1 November 2024

  125 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Anomalies relative to the larger geophysical background: Features seen in geophysics surveys with unique strength and geometry relative to their background can likely be attributed to a similar uniqueness within the underlying geology. Intrusive bodies, large increases in veining and sulphide mineralization, or contrasts in lithological regimes are often seen as anomalies across geophysics datasets. As these are directly related to gold prospectivity on the Queensway property, they are often defined as targets for exploration of varying degrees based on numerous other factors.

 

Areas with identifiable geophysical characteristics which match those of a previously successful exploration target: Specific lithological or structural settings previously shown to favour gold mineralization can have an identifiable geophysical footprint. This footprint can then be identified in new areas during survey interpretation and determined as targets for exploration. Within the Queensway property, these identifiable footprints often relate to interactions of like-oriented structures which lead to a rheological and density regime favourable for fluid flow and therefore gold mineralization. These are most easily identified in electromagnetic or magnetic surveys and their computationally derived derivative products.

 

In 2017, On behalf of Palisade (now NFG), CGG Canada Services Ltd. (CGG) conducted a HELITEM electromagnetic and magnetic airborne survey on the entirety of the Queensway project at the time covering roughly 5312 line-km. Deliverables confirmed the general SW-NE structural fabric of the property in conformity with the Appleton and JBP Fault Zones. Large scale interpretations included the accurate spatial extents and geometry of the two listed major fault zones (through electromagnetic interpretation) and the presence and orientation of various dykes and newly identified lithological units identified through magnetic data.

 

In 2020, CGG conducted an airborne HELIFALCON gravity gradiometer and aeromagnetic survey on the Queensway North portion of the property covering roughly 1705 line-km. Large changes in the gravity field were consistent with mapped geologic features such as the higher density rocks of the Gander River Ultramafic Complex on the east side of the Queensway area correlating to a clear high gravity signal. With finer details being more difficult to resolve in the gradiometric data, CGG suggests an inversion of the data and a subsequent 3D model is required to produce a more detailed interpretation. Magnetic data from the survey confirmed features previously identified during interpretation of the 2017 CGG survey mentioned above.

 

In 2021, CGG conducted a HELITEM2 electromagnetic and magnetic airborne survey on Queensway North and the newly acquired claims stretching the entire eastern extent of Queensway south, covering roughly 5,722 line-km (Figure 9.12). Regional fabrics with a general SW-NE trend were identified in both the electromagnetic and magnetic data and support previously interpreted lithological and structural interpretations as well as similar features identified in the 2017 CGG geophysics survey.

1 November 2024

  126 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 9.12 First derivative of chargeability from 2021 geophysical survey.

 

 

1 November 2024

  127 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Computationally derived products of both datasets provide varying levels of detail for more precise structural and geological interpretations throughout the Queensway property in its entirety. Also in 2021, TechnoImaging completed a 3D inversion of 650 line-km of the 2017 HELITEM airborne electromagnetic data and 1705 line-km of the 2020 HELIFALCON total magnetic intensity and airborne gravity gradiometer data covering the entirety of the Queensway North portion of the property. This process produced 3D models of conductivity, chargeability, magnetic susceptibility, and density, all of which aided in further correlating the geophysical data with downhole drill results and interpretations.

 

In 2022, The School of Ocean Technology of the Marine Institute of Memorial University completed a high-resolution hydrographic survey over portions of Gander Lake. The survey covered a 40 square-km section on the Western side of Gander Lake, with an estimated average depth of 200 m. Products from the survey included surfaces of topography of the lakebed at 2 m, 1 m, and 0.5 m resolution. Results showed a highest elevation of -5 m and a lowest elevation of -230 m, giving important context to the geomorphological and geological context of Gander Lake.

 

In 2023, NFG conducted a geophysical integration study in the Paul’s Pond area involving the collection and interpretation of two joint magnetics and VLF-EM surveys, one collecting data from the ground and one from a drone. Magnetic host rocks are known in the Paul’s Pond-Greenwood area and high-resolution magnetic data is effective at identifying changes in the host rocks and faults. The two surveys purposely overlapped with the aim of interpreting results from both and determining if the generally lower resolution drone survey would provide a sufficient level of detail for exploration purposes. Initially, Simcoe Geoscience conducted a ground magnetics and VFL-EM survey along the Southeastern shoreline of Paul’s Pond covering roughly 49 line-km. Pioneer Exploration then conducted an airborne magnetics and VLF-EM survey covering the Paul’s Pond and surrounding areas using an unmanned aerial drone. Computationally derived filtered products and 3D models were provided from both surveys allowing for a more in-depth joint interpretation of the data. Where the two surveys overlapped, they both highlighted the same major features including a large magnetized lithological unit and various conductive SW-NE trending lineation’s stretching the extent of the area thought to be lithological contacts or faults.

 

Also in 2023, Fathom Geophysics completed an in-depth interpretation of the previously collected 2017 CGG airborne magnetics and electromagnetics data. This interpretation included a property-wide geological interpretation (Figure 9.13) and the suggestion of multiple geophysics-based exploration targets including the “Golden Elbow” target area to the Southeast of Eastern Pond, in Queensway South. Following this interpretation and targeting, Techno Imaging LLC completed a 3D inversion of a 650 line-km section of the Golden Elbow area. Deliverables from this process included 3D models of chargeability, conductivity, and magnetic susceptibility all of which helped to delineate major lithological units and their geometry and physical characteristics.

 

 

1 November 2024

  128 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 9.13 Lithological and structural geophysical interpretation for the Queensway Property (Source: Fathom, 2023).

 

 

1 November 2024

  129 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

To date in 2024 and as of the effective date of this report, Rosor Exploration completed a drone-based magnetics survey over the Greenwood and Bernards Pond areas, covering roughly 1,470 line-km. Once completed, the data was transferred to PGW geophysics where it was merged with the previous two magnetics surveys conducted in the Queensway South area in 2023. Final deliverables from this survey included various merged computationally derived derivatives of the magnetics data and a 3D magnetic susceptibility model created through inversion techniques.

 

The compilation, interpretation, and modelling of NFG geophysical data and information has enabled the Company to prepare a lithological and structural foundation for the Queensway Property which can assist with current prospect characterization and to identify new target areas for future exploration.

 

9.9 Seismic Survey

 

During 2023, NFG initiated a 3D seismic survey covering a 47 km2 block (5.8 km by 8.0 km) along the larger extent of the Appleton and JBP fault zones (Figure 9.14). The seismic survey and interpretation were completed by HiSeis of Subiaco, Australia. The survey encompassed the major known mineralized zones including the Keats, Keats West, Iceberg, Golden Joint, and Lotto prospects.

 

The 3D seismic technology’s acquisition phase utilized over 20,000 energy source points spaced at 12.5 m intervals along 260 km of source lines, as well as approximately 25,000 geophone receiver stations. Source lines were spaced at 100 m intervals and perpendicular receiver lines were constructed at 100 m interims to optimize resolution from 200-1,000 m in depth, with good resolution intended to penetrate to 3,000 m (Figure 9.15; New Found Gold Corp., 2023c).

 

The preliminary 3-D cube seismic interpretation outlines structures and geological features to a depth of approximately 2.5 km (New Found Gold Corp., 2024e). The structural geology aligns with known drill-defined gold-bearing structures closer to surface and illustrates the potential for additional lineaments that could represent new and untested structures. Preliminary cross-section interpretations, which use pre-stack depth migration and Pseudo Relief, for the Keats and Lotto prospects are presented in Figure 9.15. The figures illustrate the AFZ, the KBFZ, and other more shallowly dipping structures (e.g., Glenwood Shear).

 

NFG has initiated a deep drilling program and is part utilizing the seismic data to delineate targets at depth.

 

9.10 Satellite Imagery and Digital Elevation Models

 

High resolution satellite imagery is useful for supporting the development of a detailed Graphical Information System database for the project, including field mapping activities.

1 November 2024

  130 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 9.14 Three-dimensional seismic survey source lines across the Appleton and Joe Batt’s Pond fault zones (AFZ and JBP) (Source: NFG, 2024).

 

 

 

 

 

1 November 2024

  131 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 9.15 Preliminary 3-D cube cross-section interpretation using pre-stack depth migration and Pseudo Relief (orientation is looking north; Source: NFG, 2024).

 

 

 

 

 

 

 

 

1 November 2024

  132 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

In 2018, NFG contracted Pacific Geomatics Ltd. to use satellite imagery to create natural and false colour infrared images of the entire Queensway Project area with a pixel resolution of 30 cm in QWN and 50 cm in QWS and TP.

 

In 2021, multispectral satellite imagery for the southern portion of QWS was obtained from Digital Globe by Perry Remote Sensing LLC. The original plan was to acquire multispectral imagery for the entire Queensway Project area; but this was postponed due to cloud cover conditions and the onset of greening of trees and other vegetation in late Spring. Perry Remote Sensing was able to acquire good multispectral images, at a pixel resolution of 50 cm, over the southern half of QWS and is currently analyzing these to define alteration mineral assemblages that can be checked by ground reconnaissance and to generate exploration targets.

 

With respect to digital elevation models (DEM), a by-product of the CGG 2018, 2020 and 2021 geophysical surveys and data acquisition included a digital terrain model for the area covered by the survey. In 2021, RPM Aerial Services performed a helicopter-based LiDAR survey of the QWN area and, at the same time, acquired high resolution digital images that will improve the project’s GIS data base and its mapping activities.

 

In 2023, Eagle Mapping Ltd. conducted a property-wide high-resolution airborne LiDAR and imagery survey covering a roughly 2,970 square-km area (Figure 9.16. Deliverables for this survey included precision LiDAR and orthophoto images which aided in regional structural interpretation, geomorphology studies, outcrop identification and target generation for future prospecting, soil sampling and drilling.

1 November 2024

  133 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 9.16 2023 LiDAR Bare Earth image over the Queensway Property.

 

 

1 November 2024

  134 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

10 Drilling

 

To the Effective Date of this report, NFG has completed a total of 2,388 diamond drillholes for a total of 583,000 m at the Queensway Property (Table 10.1). The location of 2019-2024 drillholes is presented in Figure 10.1. A summary of drill core sample gold assays used to document the text in this section, for each drilled prospect, is presented in Table 10.2.

 

A general summary of the NFG gold prospects associated with the 2019-2024 drill programs is presented in Section 7.3, Significant Mineralized Zones. Since NFG’s previous technical report, NFG has either discovered-by-drilling, or drill-advanced, the following gold prospects:

 

Queensway North Prospect Drilling Updates: Dome, Everest, Golden Joint, Honeypot, Iceberg, Iceberg Alley, Jackpot, Keats South, Keats West, Lotto North, Monte Carlo, Road, and Big Vein (Big Vein was already discovered by LabGold).
Queensway North Drilling Discoveries: Golden Dome, and Pistachio.

 

The intent of this section is to describe the drilling procedures and core sampling and summarize all prospects that are material to the Issuer with emphasis on the prospects listed above. The prospect drill results are grouped and discussed in the text that follows by the block in which they occur (QWN, QWS, VOA, and Twin Pond blocks). Finally, this section describes NFGs recent definition of the Appleton Fault Zone Mineralized Envelope.

 

In addition to the drill results presented and discussed by prospect in this section, since NFG’s previous technical report the Company has conducted exploratory drill programs at the Dropkick, Golden Glove, Green Mantle, Knobby, and Pristine prospects. The results of these drill programs are pending or not material to the Company currently, and therefore, are not discussed in the text that follows.

 

1 November 2024

  135 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.1 Drill collar locations from NFG’s drilling programs completed at the Queensway Property. Select NFG gold prospects are also shown.

 

1 November 2024

  136 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Table 10.1 Summary of drillholes from NFG’s diamond drilling program.

 

1 November 2024

  137 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.2 Summary of drill core sample gold assays.

 

1 November 2024

  138 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

10.1 Drilling Procedures and Core Sampling

 

In 2019, NFG commissioned New Valley Drilling Co. of Springdale, NL, who utilized four drill rigs that included EF-50 and A5 skid-mounted drill rigs and a track-mounted CS-1000 drill rig. In February 2021, NFG commissioned Rally Drilling Services (Rally) of Sussex, NB to conduct drilling at the Queensway Property in conjunction with New Valley Drilling. Rally utilized HTM2500, B20, EF-50 and U6 skid-mounted Marcotte htm2500 rigs, and a skid-mounted CS-1000 rig. A barge-mounted drill was implemented by NFG on October 8, 2022. The barge drill tested the top portion of Golden Joint prospect that occurs under North Hermans Pond. The barge drill also tested a portion of the Keats prospects under the South Hermans Pond. In 2023, NFG commissioned Rock Valley Drilling for all regional QWS drilling and in early 2024, reduced to utilizing Rally only for all drilling. All drill rigs were equipped to, and drilled, HQ size core. In 2024, NFG employed Devico, a division of Imdex to implement a directional drilling technology that enables the use of branch holes to increase efficiency at intersecting deep targets. In 2024, NFG also deployed NQ core sizes within deep drillholes where to reduce pressure on the drill rods.

 

Excavators were used to clear drill sites and move the rigs. Collars were foresighted using RTK GPS receivers and marked with pickets. Drillhole orientations were measured with a TN14 gyrocompass. Core is collected twice daily by NFG personnel. All completed holes were plugged and marked with a metal post to identify the collar locations. Downhole azimuth and dip data were collected by the drill crews, using the Reflex EZ-Trac. Surveying started at 15 m past the drill casing and at 50 m intervals downhole. An exit survey was completed at 15 m intervals upon completion of the hole.

 

A tabulation of drillhole collar locations, collar elevation, hole orientation at the collar, and depth for all holes drilled by NFG up to Effective Date of this technical report, is presented in Table 10.3. With respect to drillhole orientations, and based on a review of 2,388 drillhole collars,

 

The collar elevations vary from 20 m to 179 m above sea level with an average of 81 m above sea level.

 

The azimuth of the drillholes was completed at all orientations; most of the drillholes fall within the 281° to 320° bin with an overall average of 222° (Figure 10.2a).

 

The dip varies from -90° to -42°; most of the drillholes were drilled with a dip of -45° with an overall average of 49.7°.

 

The depth of the drillholes varies from 3 m to 1,541 m; the majority of the drillholes are <600 m deep with an average total depth of 244.1 m (Figure 10.2b).

 

A large portion of the drillholes is angled perpendicular to the strike and dip of the major fault zones (AFZ and JBPFZ) and their corresponding offshoot faults (e.g., KBFZ).

 

1 November 2024

  139 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 10.2 Histograms of drillhole orientations and end of hole depths.

 

A) Histogram of drillhole orientations, azimuth degrees.

 

 

 

 

B) Histogram of drillhole end of hole depths, metres.

 

 

1 November 2024

  140 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Table 10.3 Description of NFG drillholes at the Queensway Gold Project.

 

1 November 2024

  141 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.3, continued.

 

1 November 2024

  142 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.3, continued.

 

 

1 November 2024

  143 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.3, continued.

 

 

1 November 2024

  144 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.3, continued.

 

1 November 2024

  145 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.3, continued.

 

1 November 2024

  146 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.3, continued.

 

1 November 2024

  147 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.3, continued.

 

 

1 November 2024

  148 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

The orientation of the hole relative to the dominant plane of mineralization allows the calculation of the ratio of the true width (perpendicular to mineralization) to the down-hole length. Where the orientation of the faults/veins is known, the ratio of true width to down-hole length is reported. For prospects where the orientation of mineralization has not yet been determined with confidence, the ratio of true width to down-hole length is reported as unknown. The drill core was logged and sampled by NFG geologists in NFG’s core logging facility in Gander, NL. The core samples were cut or split on-site, and half-core samples were placed into sealed sample bags in preparation for shipment to the laboratories for analytical assay test work, as follows:

 

Starting with the initial drill program in 2019, the half-core samples were prepared at ALS Minerals (ALS) in Sudbury, ON, Thunder Bay, ON, Timmins, ON, Winnipeg, MB and Moncton, NB or to Eastern Analytical Ltd. (Eastern Analytical) in Springdale, NL. The pulps prepared by ALS were shipped to ALS Vancouver (ALS), BC, for analysis via standard 30-g fire assay or screen metallic fire assay. The pulps shipped to Eastern Analytical were analyzed via standard 30-g fire assay or screen metallic fire assay.

 

In May 2022, NFG initiated a trial of the Chrysos PhotonAssayTM non-destructive method for gold analysis at MSALABS in Val-d’Or, QC, in conjunction with follow-on screen metallic fire assay or standard 30-g fire assay method at ALS Minerals in Vancouver for assay comparison.

 

Since May 2022, NFG only submits core samples for gold assay to ALS and MSALABS. In addition to gold assays, all samples prepared at ALS or MSALABS are also analyzed for a multi-element ICP package (ALS method code ME-ICP61) and a specific gravity pycnometry method (ALS method code OA-GRA08b) at ALS Vancouver. Details of analytical methods and quality assurance-quality control procedures are presented in Section 11.

 

In June 2024, all gold determinations were completed by ALS utilizing the Chrysos Photon AssayTM method or screen metallic fire assay.

 

Infill veining in secondary structures with multiple orientations crosscutting the primary host structures are commonly observed in drill core which could result in additional uncertainty in true width. As of March 1, 2023, composite intervals reported carry a minimum weighted average of 1 g/t Au diluted over a minimum core length of 2 m with a maximum of 4 m consecutive dilution when at depths above 200 m vertical depth and 2 m consecutive dilution when below 200 m vertical depth. Prior to this date, all composites allowed for 2 m consecutive dilution. Prior to February 18, 2022, all composite intervals were selected visually. Included high-grade intercepts are reported as any consecutive interval with grades greater than 10 g/t Au. Grades have not been capped in the averaging and intervals are reported as drill thickness.

 

NFG commissioned DGI Geoscience to collect optical televiewer (OTV) and acoustic televiewer (ATV) images to provide high resolution digital information on the orientations of faults, fractures, and veins. At the Effective Date of this report, 1,713 holes had OTV and ATV images. Televiewer images could not be acquired in holes in which the hole walls had collapsed or were unstable or the water was too murky. Natural gamma and gamma-gamma density probes were added later during the program, and not run on every hole. By the effective date of this report, natural gamma logs were available for 1,713 holes and gamma-gamma density logs for 231 holes and these probes are no longer incorporated within the current drill programs.

1 November 2024

  149 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Petrophysical hyperspectral logging measurements are completed on drill core using TerraSpec’s HALO mineral identification system to provide information on mica minerals (i.e., muscovite or phengite) as an indication of proximity to veins or mineralized fault zones, and sufficient reason to continue drilling.

 

The QP has reviewed NFG’s drillhole and drill core gold assay databases. The analytical work was conducted by reputable and accredited laboratories and the QP has validated the assay results versus the laboratory certificates. Hence, the QP is not aware of any drilling, sampling or recovery factors that could materially affect the accuracy and reliability of the drillhole locations or the gold assay data.

 

Currently, core samples from 2,275 out of 2,304 drillholes have certified assay results as received by NFG from the labs. Assay results for the remaining 29 drillholes are still pending. Drillholes with assay results are tagged in Appendix 1.

 

NFG’s drill core assay results are presented in sub-sections 10.2 to 10.5 below for gold prospects within the Queensway North, Queensway South, VOA Option, and Twin Ponds blocks, respectively. For each prospect, the QP has summarized the drilling exploration work that was completed and summarizes the gold assay dataset of each gold prospect.

 

With respect to core intersections of note, the QP provides a summary of the higher-grade intervals that are reported within the context of a lower grade intersection. These intercepts have been captured from NFG News Releases (New Found Gold Corp. 2020a-e, 2021a-s, 2022b-x, and 2023d-o) and verified by the QP in the laboratory certificates. Please note that all relevant assay value analytical results are presented as “core interval apparent widths”. NFG has calculated true widths for most of the Company’s disclosed core lengths.

 

10.2 Queensway North Block Prospects

 

Drilling at QWN was initiated in 2019, with 45 prospects now drill tested as of 1 November 2024. A total of 555,745 m within 2,265 holes have been drilled at QWN from 2019 to the Effective Date of this report. The QWN gold prospects are located either along the AFZ or along the JBPFZ (Figure 10.1; Figure 10.3). The drill-tested prospects within the QWN block are described in the text that follows.

 

1 November 2024

  150 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 10.3 Gold vein surface intersections for prospects along the Appleton and Joe Batt’s Pond fault zones in the Queensway North block (Source: NFG, 2024).

 

 

1 November 2024

  151 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

10.2.1 798 Gold Prospect

 

The 798 Zone is located at the north end of the JBPFZ in QWN (Figure 10.4). Two HQ-size diamond drillholes were drilled at the 798 prospect by NFG in 2021 to test gold mineralization. The two holes totalled 469 m in length (Table 10.1). Currently, all assay results from the 798 Zone have been received. The QPs review of the gold analytical results for 127 total assays shows that all analytical results were lower than 1 ppm Au, with a maximum of 0.297 ppm Au and an average of 0.01 ppm Au.

 

10.2.2 1744 Gold Prospect

 

The 1744 prospect is located at the north end of the JBPFZ in QWN, 2.7 km north-northeast of the Pocket Pond prospect and 7.9 km northeast of the Keats prospect (Figures 10.3 and 10.4). A total of 28 drillholes totaling 8,986 m were drilled in 1744 and 4,848 core samples have been assayed. The QPs review of the gold analytical results for the 4,848 samples shows:

 

4,731 analytical results (97.59%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.05 ppm Au.
96 analytical results (1.98%) were between 1 and 5 ppm Au, with an average of 2.05 ppm Au.
17 analytical results (0.35%) were between 5 and 25 ppm Au, with an average of 10.79 ppm Au.
3 analytical results (0.06%) were between 44.37 and 68.20 ppm Au, with an average of 52.52 ppm Au.
1 analytical result (0.02%) returned 105.82 ppm Au.

 

Significant drill intercepts, as reported by NFG, are presented in Table 10.4.

 

Table 10.4 Select drillhole assay intercepts for the 1744 prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

1 November 2024

  152 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.4 Drillhole collar locations along the Joe Batt’s Pond Fault Zone (Queensway North).

 

 

1 November 2024

  153 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

The drilling has defined a zone of gold mineralization with a strike length of 255 m and a depth of at least 210 m (Figure 10.5 and Figure 10.6). Further work is required to define mineralization, but preliminary interpretation suggest that gold may be hosted in two subparallel zones that dip steeply toward the northwest. These zones consist of discrete domains of brittle deformation associated with folding within a green siltstone unit. Gold is hosted in irregular massive to vuggy stylolitic veins with trace pyrite, chalcopyrite, arsenopyrite and boulangerite and has the same NH4 muscovite alteration signature seen elsewhere along the AFZ.

 

Figure 10.5 Plan view of 1744 prospect with assays above 0.5 ppm Au projected to surface (Source: NFG, 2024).

 

 

1 November 2024

  154 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 10.6 Longitudinal section through the 1744 and Glass prospects, vertically oriented, looking northwest (Source: NFG, 2024).

 

 

1 November 2024

  155 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

10.2.3 Big Dave Gold Prospect

 

Big Dave is located east of the AFZ in QWN, 4.5 km west of the 1744 prospect (Figures 10.3 and 10.7). Currently, 7,970 core samples from Big Dave have been assayed. The mineralization at Big Dave is hosted in siltstone to the east of the AFZ and the main gold trend although irregular strikes approximately north-south and dips moderately west at 60°.

 

The QPs review of the gold analytical results for the 7,970 samples assayed shows:

 

7,933 analytical results (99.54%) were lower than 1 ppm Au, with a maximum of 0.98 ppm Au and an average of 0.01 ppm Au.
34 analytical results (0.5%) were between 1.05 and 4.62 ppm Au, with an average of 1.99 ppm Au.
3 analytical results (0.04%) were between 7.31 and 10.75 ppm Au, with an average of 8.81 ppm Au.

 

Significant drill intercepts at the Big Dave prospect, as reported by NFG, are presented in Table 10.5.

 

Table 10.5 Select drillhole assay intercepts for the Big Dave prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

1 November 2024

  156 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.7 Drill collar locations at the Big Dave and Lonely Mountain prospects.

 

1 November 2024

  157 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

10.2.4 Big Vein and Pistachio Gold Prospects

 

In 2024, after NFG completed the acquisition of LAB’s Kingsway project, the Company initiated drilling at the Big Vein zone. A summary of LAB’s historical drill testing at the Big Vein prospects is presented in Section 6.2.6. Big Vein is located immediately west of the AFZ, 5.5 km northeast of the Honeypot prospect (Figure 10.8, 10.9). As of the Effective Date of this Report, NFG has completed 4 drillholes in 1,258 m drilled at the Big Vein prospect, and currently 700 core samples have assay results (Table 10.1, 10.2). The QPs review of the gold analytical results for the 700 samples assayed shows:

 

679 analytical results (97.00%) were lower than 1 ppm Au, with a maximum of 0.86 ppm Au and an average of 0.04 ppm Au,
12 analytical results (1.71%) were between 1.26 and 3.89 ppm Au, with an average of 2.05 ppm Au.
6 analytical results (0.86%) were between 5.55 and 13.20 ppm Au, with an average of 9.06 ppm Au.
3 analytical results (0.43%) of 26.90, 34.64, and 65.98 ppm Au.

 

In follow-up drilling to test 2 historical high-grade intervals reported by LAB, NFG intersected 105 g/t Au over 2.10 m and 10.4 g/t Au over 4.45 m in NFGC-24-2153, a discovery is now recognized as the “Pistachio” zone (Figure 10.8, 10.9). The 2 historical LabGold intervals intersected include 5.17 g/t Au over 7.00m in K-23-271 and 4.68 g/t Au over 5.00m in K-23-278, which are located 150 m north of the Big Vein prospect. The Pistachio Zone consists of a green siltstone unit that is host to a series of quartz veins and is spatially associated with a stibnite-bearing fault zone (New Found Gold Corp., 2024n). As of the Effective Date of this Report, a total of 4 drillholes in 1,493 m drilled have been completed at the Pistachio prospect (Table 10.1). Currently, 383 drill core samples collected from Pistachio have assay results (Table 10.2). The QPs review of the gold analytical results for the 383 samples assayed shows:

 

668 analytical results (96.08%) were lower than 1 ppm Au, with a maximum of 0.88 ppm Au and an average of 0.04 ppm Au,
8 analytical results (2.09%) were between 1.39 and 34.87 ppm Au, with an average of 2.54 ppm Au.
5 analytical results (1.31%) were between 5.39 and 11.30 ppm Au, with an average of 7.40 ppm Au.
2 analytical results (0.5%) of 56.39 and 290.73 ppm Au.

 

Significant drill intercepts at the Big Vein and Pistachio prospects, as reported by NFG, are presented in Table 10.6

 

1 November 2024

  158 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.6 Select drillhole assay intercepts for the Big Vein and Pistachio prospects. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

 

A cross-section of the Big Vein - Pistachio zone is presented in Figure 10.8. This cross-section includes historical drilling conducted by LabGold at the Big Vein and neighbouring Pristine prospects (‘K’ series drillholes).

 

10.2.5 Cokes Gold Prospect

 

NFG 2021-2024 grid and targeted drilling has successfully expanded the Cokes prospect, a historic showing located 300 m southwest of Keats West on the west side of the AFZ (Figures 10.3 and 10.10). As of the Effective Date of this report there are 75 drillholes at Cokes totaling 15,616 m (Table 10.1).

 

The Cokes prospect consists of two gold mineralized structures. One has formed at the contact between a massive bed of greywacke and a domain of black siltstone that forms the northwest limb of an open, gently southwest plunging syncline. The second, having a similar trend, located 200 m to the north, is a shear structure that strikes approximately east-west and gently dips to the south-southeast at a similar dip angle of 30° to the neighbouring Keats West Zone.

 

1 November 2024

  159 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 10.8 Big Vein, Pistachio, and Pristine gold prospects. ‘K’ series drillholes were drilled by LabGold and are discussed in Section 6.2.6. (Source: NFG 2024).

 

 

1 November 2024

  160 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 10.9 Drill collar locations of the Big Vein and Pistachio prospects, Queensway North Block.

 

1 November 2024

  161 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.10 Drill collar locations at the Cokes, Keats, Keats North, Keats South, and Keats West prospects, Queensway north block.

 

 

1 November 2024

  162 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Mineralization at Cokes is typically characterised by stockwork-style quartz veining that is hosted by interbedded siltstone and greywacke.

 

Currently, 16,182 core samples from Cokes have been assayed. The QPs review of the gold analytical results for the 16,182 samples assayed shows:

 

15,789 analytical results (97.57%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.06 ppm Au,
354 analytical results (2.10%) were between 1 and 4.88 ppm Au, with an average of 2.18 ppm Au.
37 analytical results (0.23%) were between 5.01 and 24.23 ppm Au, with an average of 7.81 ppm Au.
2 analytical results (0.01%) returned 60.94 ppm Au and 68.20 ppm Au.

 

Significant drill intercepts at the Cokes prospect, as reported by NFG, are presented in Table 10.7.

 

 

Table 10.7 Select drillhole assay intercepts for the Cokes prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

1 November 2024

  163 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

10.2.6 Dome and Golden Dome Gold Prospect

 

The Dome prospect is located on the east side of the AFZ in QWN between the Golden Joint and Lotto prospects, 3.4 km southwest of Big Dave (Figure 10.3; Figure 10.11). Currently, 30 drillholes totaling 7,976 m have been drilled at the Dome prospect and 7,838 core samples have been assayed (Tables 10.1, 10.2). The QPs review of the gold analytical results for the 7,838 samples assayed shows:

 

7,779 analytical results (99.25%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.03 ppm Au,
49 analytical results (0.63%) were between 1.03 and 4.61 ppm Au, with an average of 1.86 ppm Au.
8 analytical results (0.10%) were between 6.12 and 19.05 ppm Au, with an average of 9.34 ppm Au.
2 analytical results (0.02%) returned 38.70 ppm Au and 162.50 ppm Au.

 

Significant drill intercepts, as reported by NFG, are presented in Table 10.8. The drill results suggest that the mineralized trend dips at 70° in the 160° direction and is associated with brittle faulting and massive to stylolitic vuggy quartz-carbonate veining like the other AFZ prospects. Dome mineralization has been drill tested over a strike length of 420 m and to a depth of 150 m, it is open at depth. The mineralization has an apparent plunge of 30° toward the southwest (Figure 10.12; Figure 10.13). NFG drilling extended its strike length of Dome to over 400 m where it is interpreted to interact with Golden Joint prospect before terminating at the AFZ (New Found Gold Corp., 2023).

 

Table 10.8 Select drillhole assay intercepts for the Dome prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

1 November 2024

  164 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Deep drilling in August of 2024 identified the new Golden Dome zone, which is located between the Golden Joint and Dome prospects. A single drillhole (NFGC-24-2158) targeted a previously untested area between Golden Joint and Dome and intersected high-grade gold mineralization approximately 200 m below existing drilling at the Dome prospect (New Found Gold Corp., 2024o). This single drillhole had a total depth of 578 m, and 620 drill core samples were collected and assayed. The QPs review of the gold analytical results for the 620 samples assayed shows:

 

603 analytical results (97.26%) were lower than 1 ppm Au, with a maximum of 0.88 ppm Au and an average of 0.03 ppm Au,
9 analytical results (1.45%) were between 1.14 and 3.70 ppm Au, with an average of 2.31 ppm Au.
4 analytical results (0.65%) were between 5.77 and 15.99 ppm Au, with an average of 9.03 ppm Au.
2 analytical results (0.32%) returned 27.78 ppm Au and 37.79 ppm Au.
2 analytical results (0.32%) returned 109.22 and 1229.0 ppm Au.

 

Significant drill intercepts, as reported by NFG, are presented in Table 10.9.

 

Table 10.9 Select drillhole assay intercepts for the Golden Dome prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

1 November 2024

  165 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.11 Drill collar locations at the Dome, Golden Joint, K2, K2 West, Little Zone, Lotto, Lotto North, Monte Carlo, Road, and Powerline prospects, Queensway North block.

 

1 November 2024

  166 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.12 Plan view of the Road, Dome, Golden Joint, Lotto, Lotto North, and Zone 36 prospects with assays above 0.5 ppm Au projected to surface (Source: NFG, 2024).

 

 

 

1 November 2024

  167 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 10.13 Longitudinal section through the Golden Joint, Dome, Golden Dome, Lotto, and Lotto North prospects, vertically oriented, looking northwest (Source: NFG, 2024).

 

 

1 November 2024

  168 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

10.2.7 Everest Gold Prospect

 

The Everest prospect is situated on the east side of the AFZ, 1.1 km northeast of the Lotto North showing (Figures 10.3 and 10.14). Currently, 38 drillholes totaling 11,091 m have been drilled at Everest as of the Effective Date of this report. Grid drilling intersected significant gold mineralization that is spatially associated with a shear zone that proximal to the AFZ and possibly a splay to it (New Found Gold Corp., 2023g). Interpretation of the data from a small 2023 follow-up program suggests that mineralization is predominantly controlled by two discrete low angles southwest dipping brittle fault zones. From April 19 to the Effective Date of this report, 9 diamond drillholes have been completed in 2854 m at the Everest zone. As of the Effective Date of this Report, 11,115 core samples from Everest have been assayed.

 

The QPs review of the gold analytical results for the 11,115 samples assayed shows:

 

11,009 analytical results (99.05%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.03 ppm Au.
91 analytical results (0.82%) were between 1.02 and 4.92 ppm Au, with an average of 2.01 ppm Au.
12 analytical results (0.11%) were between 5.00 and 16.04 ppm Au, with an average of 8.06 ppm Au.
3 analytical results (0.03%) returned 44.23, 131.50, and 166.50 ppm Au.

 

Significant drill intercepts, as reported by NFG, are presented in Table 10.10.

 

 

Table 10.10 Select drillhole assay intercepts for the Everest prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

1 November 2024

  169 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.14 Drill collar locations at the Everest, Honeypot, and Jackpot prospects, Queensway North block.

 

 

 

1 November 2024

  170 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

10.2.8 Gander Outflow Gold Prospect

 

Gander Outflow is located along the AFZ in QWN, 4 km southwest of the Keats prospect (Figures 10.3 and 10.15). Twelve drillholes have been drilled totaling 3,105 m (Table 10.1). Anomalous gold was intersected and corresponds to weak stockwork veining and minor brittle faulting hosted by interbedded siltstone and greywacke.

 

Currently, NFG has assayed a total of 3,057 core samples. The QPs review of the gold analytical results for the 3,057 assays received shows:

 

3,053 analytical results (99.87%) were below 1 ppm Au, with an average of 0.02 ppm Au.
3 analytical results (0.10%) were between 1.08 and 1.48 ppm Au, with an average of 1.23 ppm Au.
1 analytical result (0.03%) returned 7.73 ppm Au.

 

10.2.9 Glass Gold Prospect

 

The Glass prospect is located at the north end of the JBPFZ in QWN, directly adjacent to the 1744 prospect (Figures 10.3 and 10.4). A total of 6 diamond drillholes have been drilled by NFG totaling 1,558 m. Currently, 1,085 core samples from Glass have been assayed. The QPs review of the gold analytical results for the 1,085 samples assayed shows:

 

1,076 analytical results (99.01%) were lower than 1 ppm Au, with a maximum of 0.96 ppm Au and an average of 0.01 ppm Au.
6 analytical results (0.93%) were between 1.06 and 4.18 ppm Au, with an average of 2.10 ppm Au.
3 analytical results (0.28%) were between 5.19 and 10.80 ppm Au, with an average of 7.50 ppm Au.

 

Significant drill intercepts, as reported by NFG, are presented in Table 10.11.

 

 

Table 10.11 Select drillhole assay intercepts for the Glass prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

1 November 2024

  171 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.15 Drill collar locations at the Gander Outflow, Knob, Kings Point, Golden Bullet, Rocket, TCH and TCW prospects, Queensway North block.

 

 

1 November 2024

  172 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

10.2.10 Golden Bullet Gold Prospect

 

Golden Bullet is in QWN, approximately 1.5 km southwest of the Keats prospect on the east side of the AFZ (Figures 10.3 and 10.15). NFG has drilled 3 holes at Golden Bullet totaling 1,206 m. Currently, 1,266 samples for Golden Bullet have been assayed.

 

The QPs review of the gold analytical results for the 1,266 samples assayed shows:

 

1,261 analytical results (99.61%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.02 ppm Au,
5 analytical results (0.39%) were between 1 and 1.89 ppm Au, with an average of 1.33 ppm Au.

 

Recent modelling working incorporating historic drilling and trench data suggests that the Golden Bullet mineralization trends east west and is hosted by the siltstones that are 325 m east of the AFZ.

 

A plan view image of the Golden Bullet, which is shown in relation to Knob, Rocket, and other prospects, with assays above 0.5 ppm Au projected to surface is presented in Figure 10.16.

 

10.2.11 Golden Joint and Golden Joint Hanging Wall Gold Prospects

 

The Golden Joint prospect is located 1 km northeast of the Keats prospect on the east side of the AFZ in QWN (Figures 10.3 and 10.11). The initial 2021 diamond drillhole, NFGC-21-171, was collared at the EllieAnna trench and intersected significant gold mineralization which graded 10.12 ppm Au over 4.85 m, this discovery later becoming known as the Golden Joint Zone (Figure 10.12, Figure 10.13).

 

Subsequent drilling confirmed that mineralization at Golden Joint occurs in two structural settings: in the immediate footwall to the AFZ (Golden Joint), and in a more distal setting that is spatially associated with a thick, greywacke unit that has a northeast strike (Golden Joint Hanging-wall, or Golden Joint HW). The Golden Joint Zone consists of a massive quartz vein with stylolitic and brecciated textures that lies in the footwall shales adjacent to the AFZ. It strikes approximately north (N5°E) and dips steeply to the west at 82° (Figure 10.12 and Figure 10.17).

 

The Golden Joint vein is associated with a brittle fault zone and other vein arrays and has been drill-defined over a strike length of 250 m and to a depth of 385 m. The Golden Joint vein true width typically ranges from less than 1 m to 5 m; however, its character can change along strike from a massive vuggy and stylolitic quartz vein to zones of brecciation and quartz veinlets. A high-grade segment of the Golden Joint structure plunges steeply to the northeast and is interpreted to be controlled by the intersection of the AFZ and the Golden Joint structure.

1 November 2024

  173 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.16 Plan view of the Keats, TCH, Rocket, Golden Bullet, and Knob prospects with assays above 0.5 ppm Au projected to surface (Source: NFG, 2024).

 

 

 

1 November 2024

  174 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.17 Cross-section through the Golden Joint and Golden Joint Hanging Wall prospects, looking northwest (Source: NFG, 2024).

 

 

1 November 2024

  175 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

The Golden Joint HW is hosted by a thick bed of greywacke. Mineralization tends to be characterized by stockwork veining that generally trends in an east-northeast orientation and dips moderately to the southeast (Figure 10.13). The Golden Joint HW is drill-defined over a strike length of 185 m and to a depth of at least 150 m.

 

A drilling program at Golden Joint utilizing a barge drill was completed in late 2023 that was designed to test the upper 100 m of the Golden Joint Zone that was not reachable from land. This program successfully expanded the Golden Joint Zone to surface and drill results indicate continuity of the Golden Joint gold mineralization from surface down to a vertical depth of 385 m (New Found Gold Corp., 2023l; Figure 10.12, Figure 10.13; Figure 10.17). 2 additional drillholes were completed at Golden Joint in 2024, for a total of 840 m drilled.

 

A total of 105 diamond drillholes have been drilled at Golden Joint by NFG from 2021 to the Effective Date of this Report totaling 27,876 m in length (Table 10.1). Currently, 24, 958 core samples from Golden Joint have been assayed. The QPs review of the gold analytical results for the 24,958 samples assayed shows:

 

24,583 analytical results (98.50%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.04 ppm Au.
286 analytical results (1.15%) were between 1.01 and 4.99 ppm Au, with an average of 2.01 ppm Au.
49 analytical results (0.20%) were between 5.14 and 24.30 ppm Au, with an average of 11.42 ppm Au.
26 analytical results (0.10%) were between 25.39 and 96.10 ppm Au, with an average of 42.27 ppm Au.
14 analytical results (0.05%) were between 129.50 and 2109.72 ppm Au, with an average of 394.65 ppm Au.

 

Significant drill intercepts at the Golden Joint main zone, as reported by NFG, are presented in Table 10.12a. Significant drill intercepts at the Golden Joint HW, as reported by NFG, are presented in Table 10.12b.

 

Golden Joint is open at depth and future exploration will focus on expanding mineralization down dip utilizing the seismic data.

1 November 2024

  176 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.12 Select drillhole assay intercepts for the Golden Joint prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

1 November 2024

  177 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

10.2.12 H Pond Gold Prospect

 

The H Pond prospect is situated along the JBPFZ, along strike of the Pocket Pond and Glass prospects (Figures 10.3 and 10.4). Currently, 4 drillholes totaling 1,373 m have been drilled with a total of 633 core samples assayed.

 

The QPs review of the gold analytical results for the 633 samples assayed shows:

 

622 analytical results (98.26%) were below 1 ppm Au, with an average of 0.04 ppm Au.
11 analytical results (1.74%) were between 1.01 and 2.68 ppm Au, with an average of 1.85 ppm Au.

 

10.2.13 Honeypot Gold Prospect

 

The Honeypot prospect is located on the east side of the AFZ, between the Jackpot and Everest prospects (Figures 10.3 and 10.14). The Honeypot prospect is located 230 m north of Jackpot and 1.3 km north of Lotto. A total of 55 drillholes totaling 10,676 m have been drilled between 2022 and the Effective Date of this report. A total of 9,178 core samples have been assayed. The QPs review of the gold analytical results for 9,178 samples assayed shows:

 

8,949 analytical samples (97.51%) were below 1 ppm, with a maximum of 0.99 ppm Au and an average of 0.03 ppm Au.
183 analytical results (1.99%) were between 1 and 4.93 ppm Au, with an average of 2.10 ppm Au.
36 analytical results (0.39%) were between 5.07 and 24.06 ppm Au, with an average of 10.89 ppm Au.
8 analytical results (0.09%) were between 25.60 and 71.42 ppm Au, with an average of 47.50 ppm Au.
2 analytical results (0.02%) returned 311.72 and 988.70 ppm Au.

 

 

Gold mineralization at Honeypot is hosted within a primary fault that has been drill-defined over a strike length of 280 m. A high-grade domain plunges steeply to the east and is currently 50 m wide and 200 m deep (Figures 10.18 and 10.19; New Found Gold Corp., 2024a,h). The high-grade domain shows good continuity and appears to strengthen at depth. Honeypot has a similar east-northeast striking and steeply dipping orientation to the neighbouring Jackpot Zone and ongoing drilling is targeting its expansion along strike and to depth. Since NFG’s previous technical report, the Company continued follow up drilling at Honeypot and has currently completed 9 drillholes in 1,674 m, including NFGC-24-2129 which intercepted an interval of 8.44 g/t Au over 4.10 m including 23.59 g/t Au over 1.00 m. This intercept has resulted in an eastward expansion of the Honeypot zone by 75 m (New Found Gold Corp., 2024n). 75 m farther down dip from this intercept, NFGC-24-2119 intersected an interval of 5.20 g/t Au over 6.15 m. Significant drill intercepts at the Honeypot prospect, as reported by NFG, are presented in Table 10.13. Honeypot remains open along strike and dip.

1 November 2024

  178 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

Table 10.13 Select drillhole assay intercepts for the Honeypot prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

1 November 2024

  179 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.18 Longitudinal section through the Honeypot prospect, vertically oriented, looking northwest (Source; NFG, 2024).

 

 

1 November 2024

  180 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.19 Plan view of the K2, Honeypot and Jackpot prospects with assays above 0.5 ppm Au projected to surface (Source: NFG, 2024).

 

 

 

 

 

 

 

1 November 2024

  181 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

10.2.14 Iceberg and Iceberg East Gold Prospects

 

The Iceberg and Iceberg East showings are located on the east side of the AFZ, extending several hundred metres northeast from the Keats Zone (Figures 10.3 and 10.20). In late 2022, NFG embarked on a systematic grid drilling program north of Keats, looking for the continuation of the KBFZ. Announced in early 2023, the Iceberg prospect has a similar orientation to Keats Main and is comprised of a multitude of intersecting veins concentrating high-grade gold mineralization.

 

The geological characteristics of Iceberg are nearly identical to those observed at Keats Main and NFG’s current interpretation is that Iceberg is the eastern continuation of the Keats Zone that has been displaced by faulting. Currently, a total of 129 diamond drillholes have been completed at the Iceberg prospect totaling 35,793 m (Table 10.1). A total of 36,793 core samples collected at the Iceberg prospect were sent for assay. The QPs review of the gold analytical results for the 36,793 samples assayed shows:

 

35,642 analytical results (96.87%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.05 ppm Au.
849 analytical results (2.31%) were between 1 and 4.96 ppm Au, with an average of 1.95 ppm Au.
175 analytical results (0.48%) were between 5.05 and 24.89 ppm Au, with an average of 11.78 ppm Au.
73 analytical results (0.20%) were between 25.50 and 91.30 ppm Au, with an average of 46.09 ppm Au.
54 analytical results (0.14%) were between 107.50 and 1010.00 ppm Au, with an average of 261.66 ppm Au.

 

Currently, a total of 99 diamond drillholes were drilled by NFG at the Iceberg East prospect for a total of 21,710 m drilled. A total of 20,798 core samples collected from Iceberg East have been assayed as of the Effective Date of this Report.

 

The QPs review of the gold analytical results for the 20,798 samples assayed shows:

 

20,325 analytical results (97.73%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.03 ppm Au,
387 analytical results (1.86%) were between 1 and 4.95 ppm Au, with an average of 1.97 ppm Au,
54 analytical results (0.26%) were between 5.07 and 23.90 ppm Au, with an average of 10.87 ppm Au.
25 analytical results (0.12%) were between 25.80 and 94.18 ppm Au, with an average of 53.32 ppm Au.
7 analytical results (0.03%) were between 115.95 and 427.00 ppm Au, with an average of 239.90 ppm Au.

1 November 2024

  182 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 10.20 Drill collar locations at the Iceberg, Iceberg East, and Iceberg Alley prospects, Queensway North block.

 

 

 

1 November 2024

  183 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

An example of the quartz veining at the Iceberg prospect is presented in Figure 10.21. Significant drill intercepts at the Iceberg and Iceberg East prospects, as reported by NFG, are presented in Tables 10.14 and 10.15 respectively.

 

 

 

Figure 10.21 Photos of mineralization from drillhole NFGC-23-1210 (approximately 58 to 82 m).

 

 

1 November 2024

  184 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.14 Select drillhole assay intercepts for the Iceberg prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

 

1 November 2024

  185 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.14, continued

 

 

1 November 2024

  186 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.15 Select drillhole assay intercepts for the Iceberg East prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

 

 

A plan view of the Iceberg and Iceberg East prospects with assays above 0.5 ppm Au projected to surface is presented in Figure 10.22. A cross-section through the Iceberg/Keats North, Iceberg East/Golden Joint, and Iceberg Alley/Dome prospects is presented in Figure 10.23.

 

Currently, the Iceberg and Iceberg East prospects represent a high-grade zone that starts close to surface and is 300 m northeast of the Keats Main prospect along the highly prospective KBFZ. The near-surface Iceberg-Iceberg East high-grade segment of the KBFZ has a strike length of 655 m (New Found Gold Corp., 2023n). When combined with the 400 m high-grade segment of Keats Main, this near-surface, high-grade corridor covers over 1 km of strike. This domain of high-grade occurs within the overall KBFZ, a gold mineralized damage zone that is drill-defined over 1.9 km of strike, where it remains open (New Found Gold Corp., 2024c,e,f).

1 November 2024

  187 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Mineralization at Iceberg and Iceberg East ranges in true width from 10-40 m, intervals received have demonstrated good continuity of the high-grade along strike and to depth, and the Keat’s Baseline Fault Zone remains open in all directions. Exploration will focus on expansion drilling both along strike and to depth.

 

In 2024, the Company initiated a deep drilling program along the AFZ testing targets generated by interpretations of 3-D seismic data, including deep targeting at Iceberg and the extension of 2 drillholes. Highlights of the deep drilling program at Iceberg include NFGC-23-1304, which intercepted four separate zones of gold mineralization as vertical depths from 550 to 820 m (New Found Gold Corp., 2024k, 2024l). Significant drill intercepts from Iceberg Deep drilling, as reported by NFG, are presented in Table 10.14.

 

10.2.15 Iceberg Alley Gold Prospect

 

Iceberg Alley is a prospect along the KBFZ, located 1 km along strike of the Iceberg prospect (Figures 10.3 and 10.20). It was discovered by step-out drilling completed in late 2023 targeting the eastern continuation of the Keats-Iceberg-Iceberg East corridor along the KBFZ. Currently, NFG has drilled 38 drillholes in 6,176 m at Iceberg Alley, and a total of 5,976 core samples from Iceberg Alley have been assayed.

 

The QPs review of the gold analytical results for the 5,976 samples assayed shows:

 

5,951 analytical results (99.58%) were below 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.2 ppm Au.
13 analytical results (0.22%) were between 1.07 and 3.57 ppm Au, with an average of 2.24 ppm Au.
8 analytical results (0.13%) were between 6.79 and 21.51 ppm Au, with an average of 14.34 ppm Au.
4 analytical results (0.07%) of 42.20, 50.80, 105.00, and 632.42 ppm Au.

 

Significant drill intercepts at the Iceberg Alley prospect, as reported by NFG, are presented in Table 10.16.

 

Based on the fault characteristics observed at Iceberg Alley, as well as the zone’s orientation, intensity, and width of the damage zone, the Company’s preliminary interpretation indicates that it is another displaced segment of the Keat’s Baseline Fault Zone, in a northward direction. Presently, drilling intervals define a high-grade gold domain that spans 30 m wide by 60 m deep, starting close to surface (New Found Gold Corp., 2024f). Follow-up drilling is planned at Iceberg Alley to follow this structure along strike to the east.

1 November 2024

  188 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 10.22 Plan view of the Iceberg and Iceberg East prospects with assays above 0.5 ppm Au projected to surface (Source: NFG, 2024).

 

 

1 November 2024

  189 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 10.23 Longitudinal section (image above) through the Iceberg, Iceberg East and Iceberg Alley prospects within the KBFZ, vertically oriented, looking northwest. AFZ composite longitudinal section (image below) looking northwest (Source; NFG, 2024).

 

 

 

1 November 2024

  190 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Table 10.16 Select drillhole assay intercepts for the Iceberg Alley prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

 

10.2.16 Jackpot Gold Prospect

 

The Jackpot showing is located 960 m northeast of the Lotto showing (Figures 10.3 and 10.14) and 280 m east of the AFZ. The discovery hole of 95.7 g/t Au over 3.25 m in NFGC-23-1292 was drilled as part of a targeted program testing an area of interest between Lotto North and Everest. Infill drilling at Jackpot has been ongoing through 2024, including NFGC-24-2144 which intercepted an interval of 36.7 g/t Au over 2.00 m. This interval is located 42 m from surface and infills a gap within the high-grade zone at Jackpot (New Found Gold Corp., 2024n). Currently, a total of 83 diamond drillholes in 17,185 m have been completed at the Jackpot prospect (Table. 10.1). A total of 16,136 core samples from Jackpot have been assayed.

 

The QPs review of the gold analytical results for the 16,136 samples assayed shows:

 

15,786 analytical results (97.83%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.04 ppm Au.
293 analytical results (1.81%) were between 1 and 4.88 ppm Au, with an average of 1.83 ppm Au.
32 analytical results (0.20%) were between 5.01 and 24.50 ppm Au, with an average of 10.63 ppm Au.

1 November 2024

  191 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

16 analytical results (0.10%) were between 25.20 and 90.40 ppm Au, with an average of 54.84 ppm Au.
9 analytical results (0.06%) were between 113.00 and 818.91 ppm Au, with an average of 321.74 ppm Au.

 

Significant drill intercepts at the Jackpot prospect, as reported by NFG, are presented in Table 10.17.

 

Jackpot is an east-west striking, steeply south-dipping high-grade structure host to epizonal high-grade veins with characteristics like the neighbouring Lotto Zone. The Jackpot structure has been intersected in drilling over a strike length of 345 m and to a depth of 235 m (Figure 10.24). The Jackpot structure includes a high-grade segment that demonstrates good continuity over an area that is 75 m wide and 250 m long that plunges to the southwest. It is open at depth and data from the seismic program will guide a deeper drilling program in the future.

 

 

 

Table 10.17 Select drillhole assay intercepts for the Jackpot prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

1 November 2024

  192 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.24 Longitudinal section through the Jackpot prospect, vertically oriented, looking north (Source; NFG, 2024).

 

 

 

 

1 November 2024

  193 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

10.2.17 K2 Gold Prospect

 

The K2 Zone was discovered when NFG intersected broad gold mineralization west of the AFZ while working on the Lotto North reconnaissance grid. The K2 prospect is 725 m north of Lotto, 2.2 km northeast of Keats West, and is situated on the west side of the AFZ (Figures 10.3 and 10.11).

 

The following figures depict the association between structural geology and gold mineralization at the K2 prospect:

 

Figure 10.25: Plan view of the K2 prospect with assays above 0.5 ppm Au projected to surface.

 

Figure 10.26: Cross-section through the K2 prospect.

 

Figure 10.27: Modelled cross-section through the K2 prospect.

 

Figure 10.28: Inclined three-dimensional gold mineralization model for the K2 prospect with main veins.

 

The K2 prospect is a significant structural zone made up of multiple structures and crosscutting vein orientations, that currently has a defined mineralized footprint that is 490 m long and 395 m wide. The gold mineralization begins at surface and has been drill-defined down to a maximum vertical depth of 250 m. Much of the gold at K2 is found in the “K2 Main” structure (shown in red in the Figure 10.25), a low-angle gold-bearing fault zone starting at surface that dips 30-40° to the southeast and shares a similar dip to Keats West and strike to the KBFZ. This complex network of associated structures forms a mineralized damage zone that averages 65 m in thickness (Figure 10.26).

 

The K2 prospect consists of a series of epizonal stockwork and fault-fill style quartz veins that parallel, and crosscut, the K2 Main fault to form a broad domain of gold mineralized brittle faults (Figures 10.27 and 10.28). The K2 structure is interpreted to be the master structure whereas the previously discussed “Zone 36” is a related vein that was originally exposed in trenching.

One such vein constituent of the greater K2 structure is called the Stibnite vein that has returned several significant gold intervals. Stibnite is a near-surface high-grade vein that has been traced over a current strike length of 105 m. This vein contains significant amounts of stibnite, an antimony-bearing sulphide mineral as reflected by the antimony assay results of 0.95% Sb over 12.95 m in NFGC-23-1303, and 0.04% Sb over 3.90 m in NFGC-23-1391. This is the first time this mineral association has been observed at Queensway North.

 

1 November 2024

  194 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.25 Plan view of the K2 prospect with assays above 0.5 ppm Au projected to surface (Source: NFG, 2024).

 

 

1 November 2024

  195 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 10.26 Longitudinal section through the K2 prospect, vertically oriented, looking north (Source; NFG, 2024).

 

 

1 November 2024

  196 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.27 Modelled cross-section through the K2 prospect (+/-12.5m, looking east; Source: NFG, 2024).

 

 

 

 

1 November 2024

  197 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

Figure 10.28 Inclined three-dimensional gold mineralization model for the K2 prospect with main veins (Source: NFG, 2024).

 

 

1 November 2024

  198 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Currently, 148 drillholes in 27,471 m have been completed at the K2 prospect, and 28,061 core samples have been assayed.

 

The QPs review of the gold analytical results for the 28,061 samples assayed shows:

 

26 analytical results (93.84%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.07 ppm Au.
1,475 analytical results (5.26%) were between 1 and 4.99 ppm Au, with an average of 2.01 ppm Au.
213 analytical results (0.76%) were between 5.02 and 24.70 ppm Au, with an average of 9.77 ppm Au.
31 analytical results (0.11%) were between 25.80 and 90.69 ppm Au, with an average of 42.19 ppm Au.
10 analytical results (0.03%) were between 106.50 and 370.00 ppm Au, with an average of 178.09 ppm Au.

Significant drill intercepts for the K2 prospect, as reported by NFG, are presented in Table 10.18. Mineralization at K2 generally tends to be lower grade over broad widths however, localized domains of high-grade have been identified and occur at locations where cross-cutting structures interact with the K2 structure. Drilling has been ongoing to determine the high-grade potential and results received to date indicate continuity within these domains.

Exploration will remain focused on expanding K2 down-dip in addition to looking at areas of interest at depth below and adjacent to this structure.

 

10.2.18 Keats Gold Prospect

 

The Keats prospect is located at the north end of the AFZ in QWN, along the Keats-Baseline Fault Zone (KBFZ), approximately 0.4 km southeast of the Cokes prospect and 9.6 km southwest of the 798 prospect (Figures 10.3, 10.10, and 10.29).

 

NFG diamond drilling and interpretation interpreted a brittle fault zone known as the KBFZ that has an east-northeast strike (N55°E) and dips to the southeast at approximately 60°. This brittle fault zone lies to the east of the AFZ and runs slightly oblique to it. This fault forms an extensive damage zone that is discordant to the stratigraphy, which has a northeast strike and a steep dip; it controls the development of a complex network of brittle, high-grade gold vein arrays that are epizonal in character (Figures 10.29 and 10.30).

 

1 November 2024

  199 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.18 Select drillhole assay intercepts for the K2 prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

1 November 2024

  200 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.29 Plan view of the Keats (Main) prospect with assays above 0.5 ppm Au projected to surface (Source: NFG, 2024).

 

 

1 November 2024

  201 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.30 Three-dimensional plan view map of the Keats prospect. Approximately 75 m wide horizontal section with significant veins and showing the B-B’ cross-section trace used in the previous figure (Source: NFG, 2024).

 

 

 

 

 

 

1 November 2024

  202 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Gold mineralization starts close to surface and is characterized by the presence of quartz-carbonate veins with vuggy, stylolitic and/or brecciated textures which often contain trace amounts of arsenopyrite, chalcopyrite, boulangerite or pyrite, and which are associated with a NH4 muscovite alteration (Figure 10.31).

 

 

Figure 10.31 Core photographs from NFGC-19-01: visible gold in A, C and D; vuggy quartz texture in B (Source: NFG, 2024).

 

 

 

 

 

A variety of fault and vein orientations have been encountered within and surrounding the KBFZ, forming a complex network of high-grade vein splays bifurcating from the KBFZ and the AFZ and producing several high-grade domains that plunge in varying orientations (Figures 10.32 and 10.33). Two vein orientations dominate, with the most prominent orientation being approximately parallel to the orientation of the KBFZ.

 

The “Keats Main” vein is an example of a vein with this orientation; it has been defined over a strike length of approximately 520 m and a depth of approximately 200 m, with a true width that ranges from less than 1 m to approximately 4 m (Figure 10.24 and Figure 10.25). The Keats Main vein occurs within the KBFZ and is accompanied by a complex array of high-grade gold veins of varying widths and orientations.

 

1 November 2024

  203 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 10.32 Longitudinal section through the TCH, Keats South, and Keats prospects, vertically oriented, looking northwest (Source; NFG, 2024).

 

1 November 2024

  204 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 10.33 Keats cross-sections.

 

A) Keats cross-section, looking northwest, +/- 10 m (Source: NFG, 2024).

 

 

B) Keats cross-section, looking northwest, +/- 12.5 m (Source: NFG, 2024).

 

1 November 2024

  205 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

The second common vein orientation at Keats is a westerly dip of approximately 55°. An example of a vein with this orientation is the Equinox vein which trends adjacent to the Keats Main vein and has been defined over a similar length (Figure 10.25). Where the Keats Main vein intersects the Equinox vein, a thickened domain of high-grade gold mineralization is developed. This lens of high-grade gold mineralization has demonstrated continuity that plunges to the southwest at approximately 30° and has been defined over a length of 660 m (Figures 10.32 and 10.33). New drilling in this zone shows that the control on mineralization associated with this domain of high-grade changes in the 421 area, the structural relationship between the Keats Main vein and Equinox vein is unclear in this region and it is possible that there is displacement of the KBFZ across the 421 structure.

 

Additional structures of note that form important constituents of the KBFZ network are several conjugate and cross-cutting brittle faults that are gold-rich and that create lenses of high-grade gold mineralization. Examples of such structures are the Umbra, Penumbra, Solstice, Eclipse, and 421 zones in Figure 10.24 and Figure 10.25. Umbra and Penumbra structures strike north south and can be traced through the Keats North prospect and play an important role in concentrating gold at Keats North and the northeast end of the Keats Main Zone.

 

At the southern extension of the Keats Main Zone (Keats South) high-grade gold mineralization associated with the KBFZ has been intersected by drilling targeting the down-plunge extension of the KBFZ. Drilling is limited in this region and is a key target area for future deep drilling campaigns. The Keats-Keats South segment of the KBFZ has been traced over a strike length of 1.1 km and down to a vertical depth of over 400 m and when combined with Iceberg and Iceberg East produces a mineralized corridor that is 1.9 km in strike.

 

All drill results have now been received from a shallow step-out program that utilized a barge-mounted drill situated on South Hermans Pond. This program was designed to test the shallow continuation of the KBFZ that was inaccessible from land. The drill results confirm the near-surface continuation of the Keats Main Zone, a gold-mineralized segment of the KBFZ that has a strike length of 575 m and starts at surface (New Found Gold Corp., 2024f).

 

In 2024, NFG initiated deep drilling at Keats utilizing the seismic data exploring the down-dip extension of the KBFZ with a focus on the segment closest to the AFZ, in addition to looking for new structures located between the KBFZ and the AFZ.

 

A total of 361 diamond drillholes totaling 94,200 m have been drilled at Keats by NFG between 2019 and the Effective Date of this Report (Table 10.1). Drillhole collar locations for the Keats prospect are shown on Figure 10.10. Currently, 86,049 core samples from Keats have been assayed (Table 10.2).

 

 

1 November 2024

  206 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

The QPs review of the gold analytical results for the 86,049 samples assayed shows:

 

82,503 analytical results (95.88%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.07 ppm Au,
2,887 analytical results (3.35%) were between 1 and 4.99 ppm Au, with an average of 1.93 ppm Au,
403 analytical results (0.47%) were between 5.00 and 24.70 ppm Au, with an average of 10.92 ppm Au.
160 analytical results (0.19%) were between 25.18 and 97.71 ppm Au, with an average of 49.22 ppm Au.
96 analytical results (0.11%) were between 102.50 and 2,197.25 ppm Au, with an average of 350.31 ppm Au.

 

Significant drill intercepts, as reported by NFG between 2019 and 2024, are presented in Tables 10.19 to 10.21 and include:

 

Table 10.19: Intercepts specific to the Keats Main Zone which is gold mineralization hosted by the KBFZ.

 

Table 10.20: Significant drill intercepts, as reported by NFG, for the Keats Footwall (Keats FW), which is mineralization located between the AFZ and the KBFZ, often forming panels of mineralization that trend parallel the AFZ.

 

Table 10.21: Significant drill intercepts, as reported by NFG, for the Keats Hanging Wall (Keats HW), which is mineralization located east of the KBFZ.

 

 

 

 

1 November 2024

  207 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.19 Select drillhole assay intercepts for the Keats Main Zone. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

1 November 2024

  208 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.20 Select drillhole assay intercepts for the Keats FW. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

1 November 2024

  209 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.21 Select drillhole assay intercepts for the Keats HW. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

 

 

10.2.19 Keats North Gold Prospect

 

Keats North is adjacent to the Keats West prospect (Figures 10.3 and 10.10); the prospects are located on the east and west sides of the AFZ, respectively. An extensive array of brittle faults host to high-grade gold have been discovered via reconnaissance grid drilling and has now been traced over an area 150 m wide and 630 m in strike.

 

A total of 121 HQ-size diamond drillholes totaling 26,551 m have been drilled at Keats North by NFG from 2022 to the Effective Date of this Report (Table 10.1). Currently, 23,789 core samples from Keats North have been assayed. The QPs review of the gold analytical results for the 23,789 samples assayed shows:

 

23,211 analytical results (97.57%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.07 ppm Au,
499 analytical results (2.10%) were between 1 and 4.95 ppm Au, with an average of 1.81 ppm Au.

1 November 2024

  210 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

57 analytical results (0.24%) were between 5.09 and 24.50 ppm Au, with an average of 10.16 ppm Au.
16 analytical results (0.07%) were between 25.89 and 98.70 ppm Au, with an average of 47.12 ppm Au.
6 analytical results (0.02%) were between 105.50 and 738.00 ppm Au, with an average of 234.58 ppm Au.

 

Significant drill intercepts, as reported by NFG, are presented in Table 10.22.

 

 

Table 10.22 Select drillhole assay intercepts for the Keats North prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

In 2023, Keats North drilling represents a targeted program aimed at filling gaps in segments of the Penumbra and Umbra structures and has identified near-surface mineralization near Keats Main and Iceberg prospects (New Found Gold Corp., 2023j).

 

These significant intervals along with many others occur largely within and around the Umbra, Penumbra, and Enigma structures, however, others fall outside into new structural splays; these zones remain open at depth (Figure 10.21; Figure 10.22; Figure 10.25). Umbra and Penumbra structures strike north south and can be traced through the Keats North prospect and play an important role in concentrating gold at Keats North and the northeast end of the Keats Main Zone.

1 November 2024

  211 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Gold mineralization has been traced to at least 250 m vertical and deeper exploration drilling will focus on targeting these key structures at depth.

 

10.2.20 Keats South Gold Prospect

 

The Keats South prospect is located on the east side of the AFZ, along strike of the Keats prospect (Figures 10.3 and 10.10). Keats South is the southern continuation of the Keats Main Zone along the KBFZ. This includes 421 Zone, which is a cross-cutting structure at Keats South within the southern extent of Keats Main Zone. High-grade gold mineralization in the 421 region, is controlled by the intersection of a series of south-to-southwest dipping gold-bearing structures with the AFZ and the KBFZ (New Found Gold Corp., 2023i).

 

On going deep drilling in the Keats South zone is testing the KBFZ-AFZ structural corridor and is utilizing step out wedge drilling to target high-priority deep mineralization in the area (New Found Gold Corp., 2024o). As of the Effective Date of this Report, a total of 5 wedge holes have been completed off the previously drilled NFGC-24-2112. Highlights from NFG’s deep drilling program at Keats South are presented in Table 10.23b. These initial deep drillholes intersected several domains of epizonal-style quartz veining in the footwall to the AFZ with characteristics like Keats including both high- and low-grade gold mineralization (Figure 10.34). Continued deep drilling is targeting expansion of these gold domains in addition to exploring for new ones in this region below Keats South.

 

Currently, NFG has drilled 96 drillholes in 43,787 m at the Keats South prospect (Table 10.1). A total of 36,296 core samples from Keats South have been assayed as of the Effective Date of this Report.

 

The QPs review of the gold analytical results for the 36,296 samples assayed shows:

 

35,753 analytical results (98.50%) were below 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.05 ppm Au.
452 analytical results (1.25%) were between 1.01 and 4.98 ppm Au, with an average of 1.92 ppm Au.
70 analytical results (0.19%) were between 5.01 and 21.50 ppm Au, with an average of 8.82 ppm Au.
17 analytical results (0.05%) were between 25.80 and 80.80 ppm au, with an average of 44.86 ppm Au.
4 analytical results (0.01%) were between 181.50 and 549.19 ppm Au, with an average of 305.70 ppm Au.

 

Significant drill intercepts, as reported by NFG, for the Keats South prospect and 421 Zone are presented in Tables 10.23 and 10.24 respectively.

1 November 2024

  212 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Table 10.23 Select drillhole assay intercepts for the Keats South prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

1 November 2024

  213 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.24 Select drillhole assay intercepts for the 421 Zone at Keats South prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

 

Figure 10.34 Keats South deep drilling 3D cross-section (+/-25m, looking northeast).

 

 

 

1 November 2024

  214 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

10.2.21 Keats West Gold Prospect

 

Keats West is adjacent to the Keats North prospect; the prospects are located on the west and east sides of the AFZ, respectively (Figures 10.3 and 10.10). The Keats West prospect is defined by a low angle thrust fault that dips gently to the south-southwest and is located on the west side of the AFZ.

 

The following figures depict the geology and structural association with the gold mineralization at the Keats West prospect:

 

Figure 10.35: Plan view of the Keats West, and Cokes prospects with assays above 0.5 ppm Au projected to surface.

 

Figure 10.36: Cross-section through the Keats West prospect.

 

Figure 10.37: Inclined three-dimensional gold mineralization model for the Keats West prospect with main veins.

 

The Keats West structure hosts both low and high-grade gold mineralization over a considerable thickness with cumulative widths ranging from 10-30 m (Figures 10.30 and 10.31). This fault zone occurs on the west side of the AFZ, is hosted by an interbedded sequence of black siltstone, siltstone, and greywacke, and contains a series of stacked veins that contain the gold mineralization.

 

The mineralization style is epizonal and typical of the other gold prospects found along this segment of the AFZ (Figure 10.35).

 

1 November 2024

  215 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.35 Plan view of the Keats West, and Cokes prospects with assays above 0.5 ppm Au projected to surface (Source: NFG, 2024).

 

 

 

1 November 2024

  216 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.36 Cross-section through the Keats West prospect (+/-12.5m, looking northwest; Source: NFG, 2024).

 

 

1 November 2024

  217 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.37 Inclined three-dimensional gold mineralization model for the Keats West prospect with main veins (looking south; Source: NFG, 2024).

 

 

 

1 November 2024

  218 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Drilling through 2023 focused on expansion and definition of this structure that now has a drill-defined mineralized footprint spanning an area that is 305 m long by 315 m wide and extends from surface to 130 m vertical depth (New Found Gold Corp., 2023j).

 

Additional drilling at Keats West was completed in 2024 up to the Effective Date of this report, where 12 diamond drillholes were completed in 3,237 m to better define the continuity of grade and the controls on the gold mineralization within the host fault. Deeper drilling utilized seismic data within this important domain of rock west of the AFZ, for both exploring the down-dip continuation of the Keats West structure in addition to looking for new structures at depth.

 

A total of 167 diamond drillholes totaling 34,046 m have been drilled at Keats West by NFG from 2021 to the Effective Date of this Report (Table 10.1). A total of 33,268 core samples from Keats West have been assayed as of the Effective Date of this Report. The QPs review of the gold analytical results for the 33,268 samples assayed shows:

 

30,762 analytical results (92.47%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.08 ppm Au,
2,130 analytical results (6.40%) were between 1 and 5 ppm Au, with an average of 2.07 ppm Au.
311 analytical results (0.94%) were between 5.02 and 24.88 ppm Au, with an average of 9.64 ppm Au.
47 analytical results (0.14%) were between 25.40 and 100.00 ppm Au, with an average of 52.80 ppm Au.
18 analytical results (0.05%) were between 100.50 and 519.00 ppm Au, with an average of 236.99 ppm Au.

 

Significant drill intercepts, as reported by NFG, are presented in Table 10.25. These intercepts all occur near surface and are hosted by the Keats West structure and demonstrate good continuity and strength of the gold system.

1 November 2024

  219 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.25 Select drillhole assay intercepts for the Keats West prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

1 November 2024

  220 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

10.2.22 Knob and Rocket Gold Prospects

 

The Knob and Rocket prospects were discovered along the AFZ in QWN and occur adjacent to the Golden Bullet prospect and 2.3 km southwest of Keats (Figures 10.3 and 10.15). Knob is a historic gold showing that is 150 m east of the AFZ.

 

Beginning in early 2021, NFG completed a first-pass program at the historic Grouse prospect, which is now considered to be within the current Knob gold prospect area. It is the southernmost gold zone drilled at Queensway North, and measures 6.1 km south of the Everest area. This initial program identified significant gold mineralization consisting of massive to stockwork-style quartz veins developed within and around a thick bed of greywacke hosted by an east-west striking fault zone located 300 m east of the AFZ.

 

The mineralization hosted in the greywackes at these significant distances from the AFZ is a unique feature of this segment of the AFZ and additional exploration work is required to determine the connection between these zones and the broader structural framework that is controlling the mineralization.

 

Knob Zone, the largest of the historical discoveries, consists of mineralization hosted within an east-west striking structure that crosscuts the greywacke and has been traced over a strike length of 160 m and has seen minimal modern-day drilling. The network of veining is within the greywacke and along the siltstone-greywacke contact, like the Golden Joint HW Zone. NFG has completed limited drilling in the Knob prospect area due to other drilling priorities. From 2021 to the Effective Date of this Report, NFG has completed 38 diamond drillholes in 6,286 m drilled at the Knob prospect.

 

Currently, 5,424 core samples from Knob have been assayed.

 

The QPs review of the gold analytical results for the 5,424 samples assayed shows:

 

5,307 analytical results (97.84%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.05 ppm Au.
105 analytical results (1.94%) were between 1 and 4.35 ppm Au, with an average of 1.78 ppm Au.
11 analytical results (0.20%) were between 5.02 and 22.10 ppm Au, with an average of 11.62 ppm Au.
1 (0.02%) analytical result of 227.00 ppm Au.

 

Significant drill intercepts for the Knob prospect, as reported by NFG, are presented in Table 10.26.

 

1 November 2024

  221 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

The Rocket Zone is located along the AFZ in QWN 100 m to the northeast of Knob (Figures 10.3 and 10.15). It was discovered by exploration drilling stepping out around the Knob prospect. The Rocket Zone has an overall steep dip toward the southwest.

 

 

Table 10.26 Select drillhole assay intercepts for the Knob prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

Currently, NFG has drilled 42 holes in 8,275 m at the Rocket prospect (Table 10.1). Currently, 7,249 core samples from Rocket have been assayed as of the Effective Date of this Report.

 

The QPs review of the gold analytical results for the 7,249 samples assayed shows:

 

7,190 analytical results (99.19%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.03 ppm Au.
54 analytical results (0.74%) were between 1 and 4.84 ppm Au, with an average of 1.93 ppm Au.

1 November 2024

  222 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

3 analytical results (0.04%) were between 5.47 and 5.88 ppm Au, with an average of 5.63 ppm Au.
2 analytical results (0.03%) of 118.50 and 215.00 ppm Au.

 

Significant drill intercepts for the Rocket prospect, as reported by NFG, are presented in Tables 10.27.

 

Table 10.27 Select drillhole assay intercepts for the Rocket prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

 

 

10.2.23 Little Zone Gold Prospect

 

In August 2020, NFG drilled six diamond drillholes at the Little Zone target, west of the AFZ, 1 km northwest of the Keats prospect (Figures 10.3 and 10.11). From 2023 to the Effective Date of this Report, a total of 28 drillholes totaling 5,922 m have been drilled at the Little Zone prospect. A total of 6,333 core samples from Little Zone have been assayed. The QPs review of the gold analytical results for the 6,333 samples assayed shows:

 

6,287 analytical results (99.28%) were lower than 1 ppm Au, with a maximum of 0.98 ppm Au and an average of 0.04 ppm Au.
42 analytical results (0.66%) were between 1.02 and 4.81 ppm Au, with an average of 1.77 ppm Au.
4 analytical results (0.06%) were between 5.09 and 9.55 ppm Au, with an average of 6.77 ppm Au.

 

Significant drill intercepts, as reported by NFG, are presented in Table 10.28. These results demonstrate significant near-surface mineralization.

 

In addition, drillhole NFGC-20-14 returned two intercepts of high-grade silver mineralization of 253.8 ppm Ag over 2.0 m and 94.9 ppm Ag over 1.0 m. The true widths of these high-grade silver intervals have not yet been determined. This is the first instance of high-grade silver being identified on the Queensway property. This high-grade silver mineralization lies adjacent to the gold-bearing faults and veins in the Little-Powerline Zone.

1 November 2024

  223 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Gold mineralization at the Little Zone is interpreted to be associated with a north-striking fault. Follow-up drilling identified an extensive brittle fault associated with low-grade gold mineralization hosted in stockwork and brecciated veinlets hosted by grey to black siltstone in contact with greywacke.

 

Table 10.28 Select drillhole assay intercepts for the Little Zone prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

10.2.24 Lotto Gold Prospect

 

The Lotto prospect is located approximately 0.7 km north-northeast of Golden Joint in QWN and includes Sunday and Tuesday zones (Figures 10.3 and 10.11). The initial holes that intersected the Lotto Main vein targeted the intersection of two vein orientations observed in a historic trench. Since this discovery, most of the exploration drilling has been focused on testing the Lotto Main vein which strikes north (Azimuth N0°E), and dips steeply to the east at approximately 85°. The Lotto Main vein occurs approximately 200 m east of the AFZ and ranges in true width from less than 1 m to approximately 3.5 m (Figure 10.38). Other notable veins in the Lotto prospect are Sunday and Tuesday veins. These occur between the Lotto Main vein and the AFZ in a region known as the Lotto Footwall (‘FW’).

 

A total of 96 diamond drillholes totaling 26,055 m have been drilled at Lotto by NFG from 2020 to 2024 (Table 10.1). Drillhole collar locations for the Lotto prospect are shown on Figure 10.9. Currently, 23,975 core samples from Lotto have been assayed.

 

The QPs review of the gold analytical results for the 23,975 samples assayed shows:

 

23,447 analytical results (97.80%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.03 ppm Au.

1 November 2024

  224 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

430 analytical results (1.79%) were between 1 and 4.98 ppm Au, with an average of 1.85 ppm Au.
59 analytical results (0.25%) were between 5.06 and 24.71 ppm Au, with an average of 11.46 ppm Au.
18 analytical results (0.07%) were between 25.30 and 98.90 ppm Au, with an average of 47.23 ppm Au.
21 analytical results (0.09%) were between 107.50 and 1332.55 ppm Au, with an average of 285.17 ppm Au.

 

Significant drill intercepts for the Lotto Main and Lotto FW, and the Sunday Zone, as reported by NFG, are presented in Tables 10.29, 10.30 and 10.31. The intercepts demonstrate good continuity of a high-grade lens that is interpreted to plunge steeply to the northeast and is likely controlled by the intersection of the Lotto Main vein with a thin bed of greywacke. More recent drilling has identified additional high-grade domains within the Lotto Main vein which could be attributed to a roll or dip-change that the vein takes.

 

The contained high-grade segment of the Lotto Main vein has been defined over a strike length of approximately 200 m and to a depth of 220 m, but the vein itself has been intersected up to 350 m vertical depth (Figure 10.13 and Figure 10.29). Exploration will utilize the seismic data to test the down-dip extensions of the Lotto structure.

 

 

Table 10.29 Select drillhole assay intercepts for the Lotto FW. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

1 November 2024

  225 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.30 Select drillhole assay intercepts for the Lotto Main Zone. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

 

 

Table 10.31 Select drillhole assay intercepts for the Sunday Zone. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

 

1 November 2024

  226 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.38 Cross-section through the Lotto prospect, looking northeast, +/- 20 m (Source: NFG, 2024).

 

1 November 2024

  227 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

10.2.25 Lotto North Gold Prospect

 

The Lotto North prospect is adjacent (north) to the Lotto prospect in QWN on the east side of the AFZ (Figures 10.3 and 10.11). Systematic grid drilling testing along the eastern side of the AFZ north of Lotto identified this new gold bearing structural zone in November 2022. A total of 86 diamond drillholes totaling 20,715 m have been drilled at Lotto North by NFG of the Effective Date of this Report (Table 10.1). Drillhole collar locations for the Lotto North prospect are shown on Figure 10.11.

 

Currently, 19,038 core samples from Lotto North have been assayed. The QPs review of the gold analytical results for the 19,038 samples assayed shows:

 

18,637 analytical results (97.90%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.04 ppm Au.
322 analytical results (1.69%) were between 1 and 5 ppm Au, with an average of 1.96 ppm Au.
61 analytical results (0.32%) were between 5.03 and 24.30 ppm Au, with an average of 9.89 ppm Au.
16 analytical results (0.08%) were between 26.96 and 86.70 ppm Au, with an average of 47.40 ppm Au.
2 analytical results (0.01%) of 109.00 and 225.00 ppm Au.

 

Significant drill intercepts, as reported by NFG, are presented in Table 10.32. At Lotto North, gold mineralization is hosted within a series of AFZ-typical epizonal-style veins contained within a north-south striking brittle fault zone immediately north of the Lotto prospect. Gold mineralization contained within this structure has been traced over a strike length of 340 m and to a vertical depth of 180 m; it remains open at depth and is interpreted to be the same structure that hosts the Lotto Main vein but has been offset by late faulting in this region.

 

When combined with the Lotto Main Zone, these high-grade gold-bearing structures have been drill-defined over a total strike length of 630 m (Figure 10.11; Figure 10.12; Figure 10.13).

 

 

1 November 2024

  228 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 10.32 Select drillhole assay intercepts for the Lotto North prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

10.2.26 Monte Carlo Gold Prospect

 

The Monte Carlo prospect is located adjacent to the Lotto prospect on the west side of the AFZ (Figures 10.3 and 10.11). Monte Carlo is defined by an east-west striking, steeply dipping, gold mineralized vein and is most like Lotto. In addition, low-grade gold mineralization exists in historic drilling in this area. The vein occurs within a fault zone that has been intercepted over a strike length of 520 m and down to a vertical depth of 160 m (Figures 10.39 and 10.40). NFG’s 2023 drill program expanded upon a high-grade segment of Monte Carlo that starts at surface and has a strike length that spans 135 m (New Found Gold Corp., 2023k). NFG completed an additional 13 diamond drillholes in 2024 up to the Effective Date of this Report for a total of 3,847 m drilled. The Monte Carlo vein and associated fault is open at depth with limited exploration completed below 200 m vertical.

 

A total of 115 diamond drillholes holes totaling 25,462 m have been drilled at Monte Carlo by NFG as of the Effective Date of this Report (Table 10.1). Currently, 24,362 core samples from Monte Carlo have been assayed. The QPs review of the gold analytical results for the 24,362 samples assayed shows:

1 November 2024

  229 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

23,604 analytical results (96.89%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.04 ppm Au.
678 analytical results (2.78%) were between 1 and 5 ppm Au, with an average of 2.10 ppm Au.
60 analytical results (0.25%) were between 5.00 and 23.95 ppm Au, with an average of 9.49 ppm Au.
16 analytical results (0.06%) were between 27.41 and 92.51 ppm Au, with an average of 50.39 ppm Au.
4 analytical results (0.02%) were between 111 and 1910.00 ppm Au, with an average of 617.01 ppm Au.

 

Significant drill intercepts at the Monte Carlo Zone, as reported by NFG, are presented in Table 10.33.

 

 

Table 10.33 Select drillhole assay intercepts for the Monte Carlo prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

1 November 2024

  230 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.39 Plan view of the Monte Carlo and Powerline prospects with assays above 0.5 ppm Au projected to surface (Source: NFG, 2024).

 

 

 

1 November 2024

  231 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 10.40 Longitudinal section through the Monte Carlo prospect, vertically oriented, looking north (Source; NFG, 2024).

 

1 November 2024

  232 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

10.2.27 Pocket Pond Gold Prospect

 

In May of 2021, NFG initiated a drill program following up on historic drilling and anomalous grab samples at the Pocket Pond prospect located 5.5 km east-northeast of the Keats Zone on the JBPFZ in QWN (Figures 10.3 and 10.4). A total of 54 diamond drillholes totaling 12,518 m were drilled at Pocket Pond by NFG (Table 10.1).

 

Currently, 6,444 core samples from Pocket Pond have been assayed. The QPs review of the gold analytical results for the 6,444 samples assayed shows:

 

6,330 analytical results (98.23%) were lower than 1 ppm Au, with a maximum of 0.98 ppm Au and an average of 0.05 ppm Au.
97 analytical results (1.51%) were between 1.01 and 4.91 ppm Au, with an average of 2.09 ppm Au.
14 analytical results (0.22%) were between 5.28 and 23.49 ppm Au, with an average of 13.95 ppm Au.
3 analytical results (0.05%) were between 26.70 and 88.70 ppm Au, with an average of 48.24 ppm Au.

 

Drilling has identified mineralization like that seen in the 1744 area, characteristic of the JBP structural trend of epizonal-style, with irregular stylolitic massive to vuggy veins that are spatially associated with brittle faulting and folding in a green siltstone unit. Continuity of grade has been difficult to establish; preliminary interpretation suggests that some of the Pocket Pond veins may dip steeply to the northwest.

 

The interpretation of the drill data at Pocket Pond has defined a mineralized trend with a strike length of 160 m and a depth of at least 145 m (Figures 10.41 and Figure 10.42).

 

Significant drill intercepts, as reported by NFG, are presented in Table 10.34.

 

1 November 2024

  233 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.41 Plan view of Pocket Pond Zone with assays above 0.5 ppm Au projected to surface (Source: NFG, 2024).

 

 

 

 

1 November 2024

  234 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.42 Longitudinal section through the Pocket Pond prospect, vertically oriented, looking northwest (Source: NFG, 2024).

 

 

1 November 2024

  235 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Table 10.34 Select drillhole assay intercepts for the Pocket Pond prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

10.2.28 Powerline Gold Prospect

 

The Powerline prospect is located on the west side of the AFZ, approximately 250 m northeast of the Little Zone prospect and 800 metres south of the Monte Carlo prospect (Figures 10.3 and 10.11). As of the Effective Date of this report, a total of 57 drillholes totaling 11,376 m has been drilled and a total of 10,336 core samples from the Powerline prospect have been assayed. The QPs review of the gold analytical results for the 10,336 samples assayed shows:

 

10,213 analytical results (98.81%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.03 ppm Au.
97 analytical results (0.94%) were between 1.01 and 4.81 ppm Au, with an average of 1.96 ppm Au.
20 analytical results (0.19%) were between 5.07 and 24.40 ppm Au, with an average of 11.41 ppm Au.
4 analytical results (0.06%) of 27.10, 38.10, 102.50 and 165.14 ppm Au.

1 November 2024

  236 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Significant drill intercepts at the Powerline prospect, as reported by NFG, are presented in Table 10.35. Low-grade mineralization has been defined over a current strike length of 350 m at Powerline within testing only at shallow depths (New Found Gold Corp., 2024d). It is a shallowly northeast-dipping shear zone with characteristics like the neighbouring Keats West Zone.

 

Table 10.35 Select drillhole assay intercepts for the Powerline prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

10.2.29 Road Gold Prospect

 

Road is located east of the AFZ and 450 m east of Golden Joint (Figure 10.11) and at the eastern extent of Iceberg East. Currently, a total of 28 drillholes have been completed at the Road prospect for a total of 6,625 m. Currently, 5,942 core samples from Road have been assayed. The QPs review of the gold analytical results for the 5,942 samples assayed shows:

 

5,904 analytical results (99.36%) were lower than 1 ppm Au, with a maximum of 0.92 ppm Au and an average of 0.02 ppm Au,
26 analytical results (0.44%) were between 1 and 4.06 ppm Au, with an average of 1.93 ppm Au.
8 analytical results (0.13%) were between 5.11 and 10.62 ppm Au, with an average of 7.37 ppm Au.
3 analytical results (0.05%) were between 25.89 and 33.70 ppm Au, with an average of 30.10 ppm Au.
1 analytical result (0.02%) was 104.50 ppm Au.

1 November 2024

  237 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Significant drill intercepts, as reported by NFG, are presented in Table 10.36. The drill results suggest that gold is associated with a brittle fault that dips at 40° in the 255° direction; the quartz-carbonate veins associated with this fault have massive vuggy, stylolitic and brecciated textures, like other AFZ prospects (Figure 10.12).

 

 

Table 10.36 Select drillhole assay intercepts for the Road prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

10.2.30 Trans-Canada Highway (TCH) - Trans-Canada West (TCW) Gold Prospect

 

The Trans-Canada Highway and Trans-Canada West (TCH-TCW) prospects are located between Cokes and Knob, where mineralization has been identified in structures located in the footwall of the AFZ (Figures 10.3 and 10.15). Originally targeted because this area is located along strike of the KBFZ but on the west side of the AFZ. Currently, a total of 27 holes totaling 8,609 m has been drilled at TCH and 22 holes totaling 5,531 m at TCW (Table 10.1).

 

A total of 9,165 core samples were assayed from TCH. The QPs review of the gold analytical results for the 10,015 samples assayed shows:

 

9,918 analytical results (99.07%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.05 ppm Au.
78 analytical results (0.85%) were between 1 and 4.78 ppm Au, with an average of 1.53 ppm Au.
5 analytical results (0.07%) were between 6.45 and 14.46 ppm Au, with an average of 8.90 ppm Au.
2 analytical results (0.02%) were 32.43 and 226.45 ppm Au.

 

Significant drill intercepts at TCH, as reported by NFG, are presented in Table 10.37.

1 November 2024

  238 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

Table 10.37 Select drillhole assay intercepts for the Trans-Canada Highway prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

At the TCW prospect, mineralization has been identified in structures located in the hanging wall of the AFZ (Figure 10.18). Epizonal-style veining is associated with significant brittle faulting and silicification in the siltstones. Currently, 5,900 core samples from TCW have been assayed. The QPs review of the gold analytical results for the 5,900 samples assayed shows:

 

5838 analytical results (98.95%) were below 1 ppm Au, with a maximum of 0.98 ppm Au and an average of 0.05 ppm Au.
56 analytical results (0.95%) were between 1 and 4.96 ppm Au, with an average of 1.67 ppm Au.
6 analytical results (0.10%) were between 5.34 and 22.01 ppm Au, with an average of 12.22 ppm Au.6

Significant drill intercepts at TCW, as reported by NFG, are presented in Table 10.38.

 

Table 10.38 Select drillhole assay intercepts for the Trans-Canada West prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

1 November 2024

  239 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

10.2.31 Whiskey Pocket Gold Prospect

 

The Whiskey Pocket prospect is located along the JBPFZ in QWN, 4.5 km southwest of the 798 Zone (Figures 10.3 and Figure 10.4). Currently, a total of 1,209 core samples from Whiskey Pocket have been assayed. The QPs review of the gold analytical results for the 1,209 samples assayed shows:

 

1,201 analytical results (99.34%) were below 1 ppm Au, with a maximum of 0.97 ppm Au and an average of 0.02 ppm Au.
7 analytical results (0.58%) were between 1 and 4.52 ppm Au, with an average of 1.87 ppm Au.
1 analytical result (0.08%) of 6.65 ppm Au.

 

10.3 Queensway South Block Prospects

 

Drilling at QWS was initiated in 2022, with 14 prospects now drill tested as of 1 November 2024 (Figure 10.43). A total of 89 drillholes totaling 19,059 m has been drilled at QWS through to the Effective Date of this technical report (Table 10.1).

 

The 14 drill-tested prospects at QWS include: Astronaut, Aztec, Camp, Devils Pond South, Devil’s Trench, Eastern Pond, Golden Elbow, Goose, Greenwood Pond #2 (Greenwood), Mars, Nebula, Nova, Paul’s Pond, Potato Trench and Till Raft. Drillhole collar locations for the QWS drilled prospects are shown on Figure 10.33.

 

In addition to the drill results presented and discussed by prospect in this section, NFG conducted exploratory drill programs at Golden Elbow, Potato Trench, and Mars. The results of these drill programs are not material to the Company currently, and therefore, are not discussed in the text that follows.

 

10.3.1 Aztec Gold Prospect

 

The Aztec Zone is located west of the AFZ in the west-central portion of QWS at the interpreted domain boundary of the Davidsville Group (Figure 10.43). Two diamond drillholes totaling 739 m were drilled at Aztec by NFG in 2022 to test gold mineralization (Table 10.1).

 

Currently, a total of 789 core samples from Aztec have been assayed. The QPs review of the gold analytical results for the 789 samples assayed shows that all 789 analytical results were below 1 ppm Au, with a highest result of 0.34 ppm Au and an average of 0.01 ppm Au.

 

Aztec is an epithermal target and is defined by a large area of sinter and is associated with a significant fault zone and hydrothermal breccia containing gold that is exposed in a trench and historical drill core. Drilling successfully intersected the fault-zone and breccia domain.

1 November 2024

  240 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 10.43 Drill collar locations at the Mars, Potato Patch, Devils Pond, Nebula, Astronaut/Nova, Greenwood, and Eastern Pond prospects, Queensway South block.

 

 

1 November 2024

  241 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

10.3.2 Devils Pond South and Camp (Bernard’s Pond) Gold Prospects

 

The Devils Pond South and Camp (Bernard’s Pond) prospects are located east of the AFZ and west of the JBPFZ in QWS, approximately 5 km southeast of the Aztec prospect (Figure 10.43). As of the Effective Date of this technical report, 9 drillholes totaling 1,896 m have been drilled at the prospects (Table 10.1).

 

Drilling intersected significant disseminated arsenopyrite mineralization and gold in quartz veinlets hosted in a thick unit of greywacke. This zone is now named “Devils Pond South” and is in a similar stratigraphic position to several of the discoveries made along the QWN segment of the AFZ in addition to the Devils Trench to the north.

 

The Camp prospect is defined as multiple gold-bearing shear zones in the Davidsville siltstone immediately east of the AFZ, a similar stratigraphic position to the other discoveries made at QWN (Figure 10.44). The mineralized shear zones are defined by domains of high strain and an increased density of stylolitic quartz veins that comprise significant concentrations of arsenopyrite and pyrite. Visible gold was observed in several veins. Currently, a total of 2,087 core samples from Camp and Devils Pond South have been assayed. The QPs review of the gold analytical results for the 2,087 samples assayed shows:

 

2,048 analytical results (98.13%) were lower than 1 ppm Au, with a maximum of 0.93 ppm Au and an average of 0.04 ppm Au.
37 analytical results (1.77%) were between 1 and 4.67 ppm Au, with an average of 1.91 ppm Au.
2 analytical results (0.10%) were 6.11 and 18.27 ppm Au.

 

Significant drill intercepts at the Camp and Devils Pond South prospects, as reported by NFG, are presented in Table 10.39.

 

Table 10.39 Select drillhole assay intercepts for the Devils Pond South and Camp prospects. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

1 November 2024

  242 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.44 Plan view of the Devils Pond South and Camp Zone prospects with assays above 0.5 ppm Au projected to surface (Source: NFG, 2024).

 

1 November 2024

  243 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

10.3.3 Devil’s Trench Gold Prospect

 

Devil’s Trench is located over 12 km to the northeast of Devils Pond South and 6 km northeast of the gold prospects at Paul’s Pond in the central portion of QWS (Figure 10.43). It was discovered in a 2023 drill program that targeted a trenched Au-in soil and till anomaly east of the AFZ (New Found Gold Corp., 2023h).

 

The Devil’s Trench target was identified using soils and is defined by a +1 g/t Au-in-soil anomaly. Subsequent trenching revealed a shear zone with quartz veining and strong arsenopyrite mineralization hosted by a greywacke unit within the highly prospective window around the AFZ, like Devils Pond South and other significant discoveries made at QWN.

 

Four diamond drillholes totaling 551 m were drilled at Devil’s Trench by NFG to test gold mineralization (Table 10.1). Currently, a total of 601 core samples from Devil’s Pond have been assayed. The QPs review of the gold analytical results for the 601 samples assayed shows:

 

597 analytical results (99.33%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.06 ppm Au.
4 analytical results (0.67%) were between 1.16 and 2.24 ppm Au, with an average of 1.56 ppm Au.

 

10.3.4 Eastern Pond Gold Prospect

 

Eastern Pond is located south of the AFZ and west of the JBPFZ in QWS, approximately 5.5 km south of the Aztec prospect and 3 km west-southwest of Bernards Pond (Figure 10.43). Currently, a total of 10 drillholes totaling 2,341 m have been drilled at the Eastern Pond prospect, and a total of 2,524 core samples have been assayed. The QPs review of the gold analytical results for the 2,524 samples assayed shows:

 

2,517 analytical results (99.72%) were lower than 1 ppm Au, with a maximum of 0.96 ppm Au and an average of 0.01 ppm Au.
7 analytical result (0.28%) were between 1.17 and 2.91 ppm Au, with an average of 1.88 ppm Au.

 

Several targets were tested in the greater Eastern Pond region. They are defined by high-grade Au-in-grab samples, largely float, Au-in-tills and several soil anomalies. Many were subsequently trenched, and drill tested in 2022 and 2023. The highlight from this work, was the drillhole from 2022 which intersected weakly Au-anomalous quartz veins hosted in an interbedded black siltstone domain. This target is locally analogous to the gold discoveries made along the west side of the AFZ at QWN.

 

1 November 2024

  244 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

10.3.5 Goose Gold Prospect

 

The Goose prospect is located west of the AFZ in QWS, approximately 5 km east-northeast of the Aztec showing (Figure 10.43). Five HQ-size diamond drillholes totalling 743 m in length were drilled at Goose by NFG in 2022 to test gold mineralization (Table 10.1). Currently, a total of 834 core samples from Goose have been assayed. The QPs review of the gold analytical results for the 834 samples assayed shows:

 

822 analytical results (98.56%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.02 ppm Au.
12 analytical results (1.44%) were between 1.04 and 2.45 ppm Au, with an average of 1.55 ppm Au.

 

The Goose target is characterized by high-grade gold discovered by historic drilling that is hosted by a sequence of siltstones that is intruded by a swarm of intermediate to mafic dykes, largely gabbro and diorite (Figure 10.45). The Goose gold mineralization occurs west of the AFZ in a unit that has not been recognized at QWN. Based on observations made from the historic drill core, mineralization is commonly hosted within the mafic intrusive rocks and is like that found at Nova and Astronaut along strike to the northeast and Greenwood #2 to the southwest.

 

10.3.6 Greenwood Pond #2 (Greenwood) Gold Prospect

 

The Greenwood Pond #2 (Greenwood) Zone is located west of the AFZ in QWS and 1.9 km south of Aztec (Figure 10.41). A total of 6 diamond drillholes totaling 756 m were drilled within the zone at Greenwood by NFG in 2022 (Table 10.1). As of the Effective Date of this Report, a total of 824 core samples from Greenwood have been assayed. The QPs review of the gold analytical results for the 824 samples assayed shows:

 

821 analytical results (99.64%) were lower than 1 ppm Au, with a maximum of 0.73 ppm Au and an average of 0.02 ppm Au.
2 analytical results (0.23%) of 1.11 and 1.30 ppm Au.
1 analytical result (0.11%) of 5.46 ppm Au.

 

Like the Goose target, Greenwood mineralization is hosted by an intercalated siltstone-mafic intrusive unit and the prospect was established by historical grab sampling that identified high-grade gold-in-outcrop.

 

10.3.7 Nebula Gold Prospect

 

The Nebula prospect is located on the east side of the AFZ, northeast of the Astronaut- Nova - Paul’s Pond prospects (Figure 10.41). Drilling confirmed that the Au-in-soil anomaly was associated with a near-surface mineralized shear zone immediately east of the inferred projection of the AFZ (Figure 10.43; New Found Gold Corp., 2023h). The gold mineralization is characterized by quartz veins containing tourmaline and arsenopyrite hosted by the Davidsville siltstone interbedded with greywacke.

1 November 2024

  245 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Currently, 2 diamond drillholes totaling 448 m were completed by NFG in 2022. Currently, a total of 6 drillholes in 1,138 m have been completed at Nebula by NFG (Table 10.1). A total of 1,288 core samples from Nebula have been assayed. The QPs review of the gold analytical results for the 1,288 samples assayed shows:

 

1,277 analytical results (99.15%) were lower than 1 ppm Au, with a maximum of 0.93 ppm Au and an average of 0.02 ppm Au.
9 analytical results (0.70%) were between 1.11 and 3.71 ppm Au, with an average of 2.00 ppm Au.
2 analytical results (0.16%) of 6.47 and 9.25 ppm Au.

 

10.3.8 Paul’s Pond, Astronaut, and Nova Gold Prospects

 

Paul’s Pond is in the central portion of QWS, 7-8 km northeast of the Aztec prospect, and is transected by the AFZ (Figure 10.43). This was one of the first areas tested in the QWS 2022 inaugural drill program due the large region of abundant Au-in-float that trends approximately northeast following the interpreted AFZ trend. Several historical Au and As-in-soil anomalies also exist in the area. Initial drilling focused on following up on the float and soil anomalies both in the siltstone-mafic intrusive unit west of the AFZ and in the siltstones east of the AFZ leading to the Nova, Astronaut and Nebula discoveries.

 

Currently, a total of 7 diamond drillholes totaling 2,252 m have been completed at Paul’s Pond (Table 10.1). A total of 2,531 core samples have been assayed. The QPs review of the gold analytical results for the 2,531 samples assayed shows:

 

2,511 analytical results (99.21%) were lower than 1 ppm Au, with a maximum of 0.93 ppm Au and an average of 0.03 ppm Au.
18 analytical results (0.71%) were between 1.00 and 4.82 ppm Au, with an average of 2.21 ppm Au.
2 analytical results (0.08%) of 5.46 and 9.90 ppm Au.

 

Astronaut and Nova are parallel structures located west of the AFZ that have been traced over 1,600 m and 250 m of strike length, respectively (Figure 10.43; New Found Gold Corp., 2023h). At Astronaut and Nova, eight out of nine holes drilled contained visible gold. The Company believes these two zones connect through Goose Zone in the southwest, which, if confirmed in future exploration programs, would expand this mineralized corridor to 2.5 km in strike length.

 

Mineralization at Astronaut and Nova is constrained to dioritic-gabbroic dykes that have intruded a package of siltstone immediately west of the AFZ and mineralization is characterized by quartz veins often containing tourmaline, arsenopyrite, chalcopyrite, pyrrhotite and pyrite (Figure 10.46).

1 November 2024

  246 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 10.45 Plan view of the Goose, Nova, Astronaut, and Nebula prospects with assays above 0.5 ppm Au projected to surface (Source: NFG, 2024).

 

 

1 November 2024

  247 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Figure 10.46 Select photographs of drill core from the Astronaut and Nova prospects. Top photo: Brecciated gold-bearing vein from drillhole NFGC-QS-22-19 at a depth of approximately 199 m (Astronaut prospect). Bottom Left: Visible gold in drillhole NFGC-QS-22-18 at approximately 48 m (Astronaut prospect). Bottom Right: Visible gold in drillhole NFGC-QS-22-21 at approximately 222 m (Nova prospect).

 

 

 

 

 

 

Currently, NFG has completed a total of 10 drillholes totaling 2,835 m at the Astronaut prospect, and a total of 3,223 core samples have been assayed. The QPs review of the gold analytical results for the 3,223 samples assayed shows:

 

3,134 analytical results (97.24%) were lower than 1 ppm Au, with a maximum of 0.98 ppm Au and an average of 0.04 ppm Au.
71 analytical results (2.20%) were between 1.00 and 4.75 ppm Au, with an average of 2.13 ppm Au.
17 analytical results (0.24%) of 5.01 and 23.90 ppm Au, with an average of 9.08 ppm Au.
1 analytical result (0.03%) of 72.59 ppm Au.

 

Significant drill intercepts at the Astronaut prospect, as reported by NFG, are presented in Table 10.40.

1 November 2024

  248 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

With respect to the Nova prospect, NFG drilled 11 drillholes totaling 2,221 m and 2,476 core samples have been assayed. The QPs review of the gold analytical results for the 2,476 samples assayed shows:

 

2,429 analytical results (98.10%) were lower than 1 ppm Au, with a maximum of 0.99 ppm Au and an average of 0.04 ppm Au.
37 analytical results (1.49%) were between 1.01 and 4.36 ppm Au, with an average of 1.83 ppm Au.
10 analytical results (0.40%) were between 5.14 and 23.40 ppm Au, with an average of 9.77 ppm Au.

 

Table 10.40 Select drillhole assay intercepts for the Astronaut prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

Significant drill intercepts at the Nova prospect, as reported by NFG, are presented in Table 10.41.

 

1 November 2024

  249 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Table 10.41 Select drillhole assay intercepts for the Nova prospect. Core intervals are apparent widths. Individual core intercepts of high-grade mineralization are denoted by the term, “Including”.

 

 

 

10.4 VOA Option Prospects

 

NFG commenced drilling within the VOA Option area in 2023 and tested 10 different target areas and defined the following gold prospects having returned anomalous gold: 69 Zone, Bigger Vein 2, Hank 1, Hank 2, Home Pond, and Karate Chop South. A total of 6,687 m across 27 drillholes have been drilled at VOA through to the Effective Date of this technical report. These prospects are located along the AFZ and between the AFZ and JBPFZ, approximately 9-12 km north of Keats at the northern extent of the QWN block (Figure 10.47).

 

In addition to the drill results presented and discussed by prospect in this section, NFG conducted exploratory drill programs at Bigger Vein, Hank 3, Fork in the Road and BD Pond. The results of these drill programs are not material to the Company currently, and therefore, are not discussed in the text that follows.

 

10.4.1 69 Zone Gold Prospect

 

The 69 Zone gold prospect is a historic showing located within the VOA Option Block of the Queensway Property, situated approximately halfway in between the AFZ and the JBPFZ (Figure 10.47). In 2023, NFG initiated drilling at 69 Zone, and drilled 4 drillholes in 972 m. Currently, 987 core samples have been assayed.

 

Anomalous gold was intersected in the historic drilling and through NFG’s relogging of these holes, the gold was found to be associated with a domain of increased strain, sericite alteration and a high density of quartz veinlets containing rare and trace stibnite, arsenopyrite and pyrite.

1 November 2024

  250 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 10.47 Plan view of the VOA Option gold prospects with assays above 0.5 ppm Au projected to surface (Source: NFG, 2024).

 

 

1 November 2024

  251 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

NFG’s follow-up drilling intersected weakly anomalous gold associated with an increased frequency of discordant, largely barren quartz veins with trace pyrite in an interbedded siltstone-greywacke host rock of the Davidsville.

 

The QPs review of the gold analytical results for the 987 samples assayed shows that all 987 samples were below 1 ppm Au, with a maximum of 0.15 ppm Au and an average of 0.01 ppm Au.

 

10.4.2 Bigger Vein 2

 

The Bigger Vein 2 prospect straddles the AFZ, approximately 1,500 m southwest of the Hank 3 prospect (Figure 10.47). NFG drilled a single drillhole at Bigger Vein 2 totaling 600 m. A total of 542 core samples have been assayed.

 

The Bigger Vein 2 target consists of a coincident Au-in-soil anomaly with a topographic lineament. NFG’s drilling intersected a wide deformation zone like the AFZ, consisting of a broad domain of high-strain, brittle faulting, earlier barren shear parallel veins and crosscutting quartz veins (like AFZ mineralization). Weakly anomalous gold correlates with crosscutting quartz veinlets in the brittle fault zones, trace pyrite and arsenopyrite was observed hosted by an interbedded sequence of black and grey Davidsville siltstone.

 

The QPs review of the gold analytical results for the 542 samples assayed shows that all 542 samples were below 1 ppm Au, with a maximum of 0.61 ppm Au and an average of 0.01 ppm Au.

 

10.4.3 Hank 1 and Hank 2 Gold Prospects

 

The Hank 1 and Hank 2 gold prospects are located on the east side of the AFZ in the newly optioned VOA Option block, with Hank 2 being approximately 1,200 m northeast from Hank 1 along strike of the AFZ (Figure 10.47). Drilling was first completed by NFG at Hank 1 and Hank 2 in 2023. A total of 7 drillholes were completed in 1,360 m at Hank 1, and a single drillhole of 441 m was completed at Hank 2. In 2024, NFG followed up and completed a single drillhole of 402 m at Hank 2.

 

Hank 1 and Hank 2 targets are defined by one of the stronger and more continuous Au-in-soil anomalies with a northeast trend that is subparallel to the strike of the AFZ. Hank 1 and Hank 2 targets are along strike of one another, approximately 600 m apart. Low grade gold mineralization was intersected at both target areas and display similar characteristics of high strain, brecciation, sericite alteration and increased quartz veining with trace arsenopyrite, and pyrite hosted by Davidsville siltstone.

 

Currently, 991 core samples from Hank 1 have been assayed. The QPs review of the gold analytical results shows that 989 (99.80%) samples were below 1 ppm Au, with a maximum of 0.47 ppm Au and an average of 0.01 ppm Au. 2 analytical results (0.20%) returned 1.18 and 1.27 ppm Au.

1 November 2024

  252 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Currently, 556 core samples from Hank 2 have been assayed. The QPs review of the gold analytical results shows that 556 samples were below 1 ppm Au, with a maximum of 0.50 ppm Au and an average of 0.02 ppm Au.

 

10.4.4 Home Pond Gold Prospect

 

The Home Pond prospect is located approximately 600 m northwest of the Hank 2 prospect and straddles the AFZ (Figure 10.47). In 2023, NFG initiated drilling at Home Pond and completed 3 drillholes in 515 m. Currently, a total of 525 core samples from Home Pond have been assayed.

 

The Home Pond target represents an area on the VOA option where NFG had an increased confidence in the position of the AFZ utilizing the electromagnetic and LIDAR data. Drilling intersected a broad deformation corridor hosted by black siltstone in the first drillhole with similar characteristics to the AFZ. The following two holes drilled, stepped east of the AFZ intersection, targeting mineralization in its hanging wall. A wide interval of brecciation, high-strain, quartz veining containing arsenopyrite and pyrite with brittle faulting was intersected and reported 1.15 g/t Au over 2.40m and 1.66 g/t Au over 2.30m in NFGC-VO-23-23.

 

The QPs review of the gold analytical results shows that 519 (98.86%) samples were below 1 ppm Au, with a maximum of 0.87 ppm Au and an average of 0.03 ppm Au. 6 analytical results (1.14%) were between 1.33 and 2.63 ppm Au, with an average of 1.82 ppm Au.

 

10.4.5 Karate Chop South Gold Prospect

 

The Karate Chop South gold prospect is located in between Home Pond and Hank 2, on the east side of the AFZ (Figure 10.47). NFG initiated drilling at Karate Chop South in 2023, where 3 drillholes were completed in 555 m. Currently, a total of 466 core samples have been assayed.

 

One of the drillholes intersected anomalous gold mineralization associated with weak sericite alteration, minor brittle faulting, an increased frequency of discordant quartz veinlets with trace arsenopyrite and pyrite hosted by grey Davidsville siltstone.

 

The QPs review of the gold analytical results shows that 462 (99.14%) samples were below 1 ppm Au, with a maximum of 0.97 ppm Au and an average of 0.03 ppm Au. 4 analytical results (0.86%) were between 1.02 and 1.24 ppm Au, with an average of 1.12 ppm Au.

 

10.5 Twin Ponds Block

 

Drilling at the Twin Ponds (TP) Block was initiated in 2022. A total of 1,508 m across 7 diamond drillholes have been drilled at TP by NFG in 2022 (Table 10.1) and as of Effective Date of the report, to test gold mineralization. A total of 1,863 core samples from Twin Ponds were assayed. The QPs review of the gold analytical results from Twin Ponds shows:

1 November 2024

  253 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

1,862 analytical results (99.95%) were lower than 1 ppm Au, with a maximum of 0.81 ppm Au and an average of 0.02 ppm Au.
1 analytical result (0.05%) of 1.33 ppm Au.

 

The drilling tested three areas of the property (Figure 10.48) with

 

1. Three drillholes (NFGC-TP-22-01, 02, and 02a) in the northern part on strike, to the northeast, of the Clydesdale showing.
2. One drillhole (NFGC-TP-22-03) in the central part of the property testing the Halley Target where anomalous grab samples were found at the intersection of the Salmon River and North Twin Faults.
3. Three holes (NFGC-TP-22-04 to 06) in the southern part, just to the north of Twin Ponds testing sections along the Island Pond fault.

 

The drilling tested two different stratigraphic areas and the structural contact between the Duder Group in the west and the Ten Mile Lake Formation in the east. Highlights from this drill program, where assays above 0.1 g/t Au, suggesting anomalous zones, were seen in only 4 holes. Between 165 m to 184.9 m (21.35 m) in hole NFGC-TP-22-01 grades were generally >0.1g/t Au with higher grades >0.2 g/t Au interval between 169 m to 175 m (6 m). This interval was associated with silicified siltstones with a graphitic component and a broad deformation corridor characterized by the presence of a quartz veined zone with breccia, cockade, and banded textures (Figure 10.49). This structure is interpreted to be the Clydesdale Fault, a contact fault between the Duder Group in the west and the Ten Miles Lake Formation in the east.

 

Hole NFGC-TP-22-02 intercepted similar anomalous >0.1g/t Au grades between 121m to 125.45 m (4.5 m) with a modestly higher-grade zone between 122 m to 124.2 m (2.2 m). Quartz veining in greywacke with boulangerite was seen in this interval. Hole NFGC-TP-22-05 contained a narrow anomalous zone in altered and silicified gabbro between 104.15 to 107.2 m (3.05 m) and Hole NFGC-TP-22-06 hosted a very narrow interval of elevated gold between 78.5 to 79.95 m (1.45 m) associated with a fault zone.

 

In general, these anomalous gold intercepts suggest a hydrothermal setting associated with the emplacement of gabbro sills and related bodies where fluids have interacted between mafic intrusive rocks and host sediments. Similar gold showings are seen regionally and in the Duder Lake area are termed, structurally controlled gabbro-hosted gold mineralization (Churchill and Evans 1992).

 

1 November 2024

  254 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 10.48 Drill collar locations at the Twin Ponds Block (Source: NFG, 2024).

 

 

1 November 2024

  255 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 10.49 Core photo of quartz vein zone-breccia, cockade, and banded textures within Twin Ponds drillhole NFGC-TP-22-01, 173.3 m to 183.85 m (Source: NFG, 2024).

 

 

 

1 November 2024

  256 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

11 Sample Preparation, Analyses and Security

 

Between 2017 and the Effective Date of this technical report (1 November 2024), NFG has collected and assessed a variety of sample types at their Queensway Gold Project in northeast Newfoundland, NL. Sample media includes:

 

Since 2017, till, soil, surface rock (outcrop and float), and trench channel samples (see Section 9).

 

Since 2019, drill core samples (see Section 10).

 

The Issuer has commissioned Lynda Bloom (P. Geo.) of Analytical Solutions Ltd. (Analytical Solutions) in Mulmur, ON, who specializes in analytical geochemistry, and quality assurance-quality control (QA-QC). Ms. Bloom has provided advice and assistance to NFG, including continuing review of procedures used by the laboratories that prepare and analyse the project’s samples. The QP has reviewed the work prepared by Analytical Solutions, along with protocol sampling and analytical documents provided by NFG and through QP sampling/analytical protocol discussions with NFG.

 

Accordingly, this section presents a summary of NFG’s sample collection and preparation, sample security, analytical methodologies, and QA-QC methods adopted by the Issuer during the Company’s 2017-2024 exploration programs at the Queensway Property.

 

11.1 Sample Collection

 

11.1.1 Till Samples

 

Till samples were collected and prepared with the goal of analyzing the number and size of gold grains. In the field, samples were screened using an 8 mm sieve to remove pebbles. Approximately 13 kg of the fine material, less than 8 mm, along with 1 kg of the coarse material, the pebbles greater than 8 mm, was packed in a heavy-duty plastic bag and sealed with a cable tie. The -8 mm fraction was used for analysis of gold content, while the +8 mm pebbles were used to log lithology. Till samples were shipped to Overburden Drilling Management (ODM) who created a concentrate.

 

11.1.2 Soil Samples

 

Soil samples were acquired by NFG geologists using a “Dutch Auger” to penetrate down to and sample the B-soil horizon. NFG soil sampling programs also utilized the mass spectrometer Halo mineral identifier on soil samples to determine if the Halo system could recognize alteration halos. Since July 2022, the soil samples were dried and sieved at site. The soil samples were bagged, labelled, and shipped to the laboratories for analysis at Eastern Analytical Ltd. (Eastern Analytical) in Springdale, NL and ALS Canada in Vancouver, BC.

1 November 2024

  257 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

11.1.3 Rock Samples

 

Rock samples are defined as surface outcrop and float samples, and trench channel samples, that were collected in the field by NFG geologists. Rock grab samples and trench channel samples were placed in heavy duty plastic bags, which were then labelled, sealed, and transported by NFG geologists to NFG’s core facility in Gander, NL.

 

At the core facility, the samples’ labels were checked, and the samples were amalgamated into larger bags for transportation of the rock samples, by NFG employees, to the laboratories, that include over the life cycle of the project: Eastern Analytical; ALS Canada Ltd. (ALS), which includes rock preparation labs in multiple Canadian jurisdictions and ALS’ Vancouver analytical laboratory in Vancouver, BC; MSALABS in Val-d’Or, QC; and SGS Canada Inc. (SGS) in Burnaby, BC.

 

11.1.4 Drill Core

 

HQ- and NQ-sized diamond drill core is transported in sealed core boxes from the NFG prospects and drill sites by NFG employees to the Company’s primary core facility in Gander, NL where the core is logged and analysed by non-destructive mass spectrometer Halo hyperspectral mineral identifier measurements prior to sampling. Once logging is completed, the drill core is transferred to a separate cutting section within the core facility.

 

The drill core samples are 0.3 to 1 m in core length. The HQ and NQ core is sawn in half by diamond saw blades, in which half the core is collected in plastic sample bags for transportation to the laboratories, and the other half is re-orientated into its original position in the core boxes for archival core storage at NFG’s archive core facility in Appleton Business Park in Appleton, NL. Where necessary due to poor core competency, a hydraulic splitter may be used.

 

At the core facility, the samples labels were checked, and the samples were amalgamated into larger bags for transportation of the core samples by NFG employees to the laboratories: Eastern Analytical, ALS Canada Ltd., MSALABS, and SGS.

 

11.2 Sample Security

 

The procedures for establishing an auditable chain of custody for every sample, and for ensuring the integrity of samples between the project site and the laboratory, are the same as in previous years.

 

The collection, packaging, transport, and receipt of samples were conducted under a strict and traceable chain of custody (CoC). The collection and packaging of samples for shipping was undertaken by contractors of NFG under the supervision of NFG’s Chief Operating Officer, Greg Matheson (P. Geo.). Samples were collected and stored in a dedicated area in the core shack under constant surveillance during the day, which is secured by lock and key at night and under video surveillance. A CoC document was created by the sample processing manager that includes a list of sample numbers and signature lines for the courier and NFG representative, confirming the state of the shipment. For shipment, samples were inventoried before being placed in rice bags, which were secured with a cable tie. The samples were then placed in shipping bins that were labelled with the shipping information and numbered security seals.

1 November 2024

  258 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

All sample transport handling, tracking, and CoC documentation is supervised by NFG personnel. At present, all ALS samples are shipped by commercial courier on a regular basis. NFG contractors delivered the sample bins to the shipping courier along with the CoC form. The CoC was signed and returned to NFG for scanning and cataloguing. The sample shipment was virtually dispatched in the MX Database by NFG sample processing manager for tracking and the laboratory was notified of the incoming shipment. Upon receipt by the laboratory, NFG’s COO and database geologist were informed, and the samples were logged in and checked against NFG’s submittal form and chain of custody document for any discrepancies.

 

11.3 Sample Preparation and Analysis

 

11.3.1 Introduction

 

NFG has historically used a variety of independent, commercial, and accredited laboratories that include Eastern Analytical, ALS, Activation Laboratories Ltd. (ActLabs), SGS, ODM, and MSALABS. Chronologically, the general sample preparation and analytical workflow includes:

 

Prior to May 2018, all NFG samples were transported directly to the Eastern Analytical laboratory in Springdale, NL.

 

Since May 2018, and in addition to Eastern Analytical, the samples were also prepared by ALS laboratories in Thunder Bay, ON, Timmins, ON, Sudbury, ON, Winnipeg, MB, and Moncton, NB prior to being analysed by fire assay at ALS Minerals, in Vancouver B.C. The rock and core samples are also analysed using a 4-acid multi-element ICP/MS package (ALS method code ME-ICP61 and ME-MS61) and a pycnometer for specific gravity (ALS method code OA-GRA08b) for drill core samples only at ALS Vancouver.

 

NFG paused sending samples to Eastern Analytical in October 2021. In May 2023, NFG resumed sending rock samples to Eastern Analytical.

 

From May 2022 to June 2024, NFG submitted approximately half of the drill core samples for gold determination by PhotonAssayTM at MSALABS in Val-d’Or, QC. The core samples were also analysed using a 4-acid multi-element ICP/MS package (ALS method code ME-ICP61 and ME-MS61).

 

Since June 2024, NFG submits 100% of the drill core samples for gold determination by PhotonAssayTM or screened metallic at ALS laboratories in Thunder Bay, ON. Select samples are analysed using a 4-acid multi-element ICP/MS package (ALS method code ME-ICP61 and ME-MS61).

1 November 2024

  259 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Since January 2024 and in addition to ALS’s multi-element ICP-MS package, all rock and drill core samples are also analysed by Photon Assay™ at ALS in Thunder Bay, ON.

 

Other intermittent analytical work was conducted at ActLabs in Ancaster, ON (till multi-element analysis), ODM in Nepean, ON (till heavy-mineral concentrates), and SGS in Burnaby, BC (check analytical laboratory).

 

11.3.2 Laboratory Accreditation

 

Eastern Analytical, ActLabs, ALS, MSALABS, and SGS are commercially accredited labs that are independent of NFG. The predominant labs that performed rock and drill core fire assays (Eastern Analytical and ALS) are both accredited for fire assay determinations to the requirements of ISO/IEC 17025:2017. Eastern Analytical is accredited by the Canadian Association for Laboratory Accreditation Inc. (CALA) and ALS by the Standards Council of Canada (SCC). SGS is also accredited to ISO/IEC 17025:2017.

 

The labs that performed multi-element ICP analyses (Eastern Analytical, ALS and ActLabs) are ISO-accredited for multi-element analytical methods.

 

MSALABS operates numerous laboratories worldwide and maintains ISO-17025 accreditation for many metal determination methods. The first PhotonAssayTM results for the Queensway Project were released in January 2022, a small set of 69 samples from two drillholes (New Found Gold Corp., 2022b). These were completed at the Intertek Genalysis laboratory in Perth, Australia, where the PhotonAssayTM method is accredited to ISO/IEC 17025 (2017) by the National Association of Testing Authorities, Australia. MSALABS deployed a PhotonAssayTM unit in Val-d’Or, Quebec, in March 2022. MSA Val-d’Or received ISO/IEC 17025 (2017) accreditation on August 30, 2023, for the gamma ray analysis (PhotonAssay™) of samples for gold.

 

ALS does not currently have accreditation for the PhotonAssay™ method at their Thunder Bay, ON laboratory. They do however have ISO/IEC 17025 (2017) accreditation for gamma ray analysis of samples for gold at their Australian labs with this method, including the Canning Vale lab in Perth, WA. ALS is accredited under ISO/IEC 17025 (2017) for fire assay analysis at their Vancouver, BC facility.

 

11.3.3 Laboratory Sample Preparation

 

Till samples: ODM created a concentrate of the till samples provided by NFG. Prior to 2019, the concentrates were created using a screening and tabling procedure. After 2019, they were created using ODM’s Heavy Mineral Concentrate (HMC) preparation procedure. The gold content of each sample was estimated from the number of gold grains found in the concentrate and their size. The shape and texture of the grains were also recorded, and the mineralogy of the associated heavy minerals was described.

1 November 2024

  260 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Soil samples: At Eastern Analytical, the soil samples were dried and sieved through 80 mesh (-180 µm) prior to gold analysis. At NFG, the soil samples were dried and screened through 80 mesh.

 

Eastern Analytical Rock and Core Sample Preparation: Eastern Analytical crushed to 80% less than 2 mm, pulverized to 95% less than 106 μm, and selected 30 g and 40 g aliquots for analyses by fire assay and screen fire assays, respectively.

 

ALS Rock and Core Sample Preparation: The NFG samples for analysis by Photon Assay™ were prepared at ALS Thunder Bay, ON. The entire sample is crushed in a Boyd Mk 4 crusher to 70% passing -10 mesh (2 mm; Method Code CRU-31). For non-visible gold (VG) samples, the sample is riffle split into an approximately 500 g jar, with the remainder stored as reject. For VG samples, total number of required jars is estimated based on weight, then all material is riffle split until no sample remains.

 

Samples selected for multi-element have the first jar (if more than one jar was prepared) pulverized to 85% passing -200 mesh (75 μm) using an LM2 ring-mill pulveriser (PUL-32m) and collected in the master pulp bag. A split of 150g is taken from the master pulp and shipped to ALS Vancouver, BC for analysis.

 

The NFG samples previously shipped for fire assay, were prepared at ALS, Sudbury, ON, Thunder Bay, ON, Timmins, ON, Winnipeg, MB or Moncton, NB. A split of the pulp was forwarded to ALS, Vancouver, BC, for routine fire assay and multi-element ICP. For samples submitted for screened fire assay (SFA; ALS method Au-SCR24C), samples are screened in Sudbury; the entire plus fraction is shipped to ALS, Vancouver, BC, along with approximately 200 grams of the fine fraction.

 

For routine or non-mineralized samples (expected less than 1 ppm Au), assay preparation procedures at ALS involved crushing of the entire sample in a Boyd Mk 4 crusher to 70% passing -10 mesh (2 mm; Method Code CRU-31). A 1,000-g aliquot was collected by standard riffle split and the remainder was bagged and stored as coarse reject. This aliquot was pulverized to 85% passing -200 mesh (75 μm) using an LM2 ring-mill pulveriser (PUL-21) and collected in the master pulp bag. From this bag, 100-140 g was scooped using the laboratory split sample envelope and sent to the analytical facility in Vancouver to be analysed by fire assay and the multi-element analytical method.

 

For the screen fire assay (SFA) procedure, if the sample was 3 kg or less in weight, the entire sample was crushed in a Boyd Mk 4 or Terminator jaw crusher to 70% passing 10 mesh (2 mm; ALS Method Code CRU-21). Excess material has been stored as a coarse reject. The crushed sample was pulverized in an LM2 pulveriser (ALS Method Code PUL-21) to 85% passing 200 mesh (75 μm) using bowls with a capacity of 1 kg.

1 November 2024

  261 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

MSALABS Rock and Core Sample Preparation: The NFG samples were crushed, distributed into plastic jars, and assayed at MSALABS, Val-d’Or, QC. For all samples, the entire sample is crushed in a TM Terminator jaw crusher or Rocklabs Smart BOYD jaw crusher to 70% passing -10 mesh (2 mm). For non-VG samples, the sample is either riffle split in the case of the Terminator crusher being used, or rotary split automatically by the Boyd crusher, into a single approximately 500 g jar, with the remainder stored as reject. For VG samples, the sample is manually scooped into approximately 500 g jars until no sample remains.

 

11.3.4 Laboratory Analytical Methodologies

 

The analytical methodologies discussed in this sub-section include analytical work conducted between 2019 and the present.

 

11.3.4.1 Eastern Analytical: Fire Assay Analysis

 

The gold and multi-element analytical methods used by Eastern Analytical are summarized in Table 11.1. Fire assay is by lead-collection/fusion in which the silver bead is dissolved in an aqua-regia digestion and analysis is by atomic absorption (AA) finish.

 

The Eastern Analytical metallic screen fire assay method began with the same crushing and pulverizing steps as they used for their conventional fire assays; all the pulp was sieved using the #150 screen to create a fine fraction (-106 μm) and a coarse fraction (+106 μm). Two fire assays of 40 g aliquots were done on the fine fraction, while the coarse fraction was fire assayed in its entirety. The grade of the original sample was then calculated by weighting the three fire assays by the mass of material each one represented.

 

Soil samples analysed at Eastern Analytical utilized a fire assay package (code: Au AA30) and by multielement ICP (Au+34 elements).

 

 

Table 11.1 Analytical methods used by Eastern Analytical.

 

Analyte Method Code Detection Limit Type of Method Finish
Au AA30 0.005 ppm 30 g fire assay AAS
Au AA40 0.005 ppm 40 g fire assay AAS
Au Au Met 0.010 ppm Screen fire assay AAS / Gravimetric / Hybrid

 

 

11.3.4.1 ALS Canada Ltd.: Photon Assay

 

In February 2024, ALS began analysing all rock and drill core samples from NFG by the PhotonAssay™ method. For more detailed description of the method, and verification method undertaken before accepting this method, see the MSA section below.

1 November 2024

  262 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

A summary of the ALS method codes is presented in Table 11.2. For routine samples, an approximately 500 g sample was analysed. The crushed samples were riffle split, and the sample was assayed for PhotonAssay™ (ALS Method Code Au-PA02). If the routine samples had PhotonAssay™ results greater than 0.8 ppm Au, this automatically triggered PhotonAssay™ for all the remaining material (ALS Method Code Au-PA02e). The coarse rejects are retrieved, and riffle split into multiple jars until material depletion, and each jar then analysed by PhotonAssay™.

 

Samples with visible gold (VG) identified were automatically selected for extinction analysis by PhotonAssay™ (ALS Method Code Au-PA02e). For these samples, all crushed material is riffle split into multiple jars, until the material is depleted. All jars are then analysed by PhotonAssay™.

 

 

Table 11.2 Photon Assay methods used by ALS.

 

Analyte Method Code Detection Limit Description
Au PA02 0.03 ppm Photon Assay -single
Au PA02e 0.03 ppm Photon Assay - extinction

 

 

11.3.4.2 ALS Canada Ltd.: Fire Assay and Multi-Element Analysis

 

The gold and multi-element analytical methods used by ALS are summarized in Table 11.2. The ICP-21 and AA-26 codes provide gold analyte measurements by fire assay inductively coupled plasma atomic emission spectroscopy (ICP-AES) and atomic-absorption (AA) analysis, respectively. Samples with 30-g fire assay results over 1 ppm Au and samples from expected mineralized zones were evaluated and analysed by screen fire assay. In November 2022, the screen threshold was raised to 2 ppm Au. Beginning January 2024, all rock and drill core samples sent to ALS were analysed by PhotonAssay™ instead of fire assay.

 

If the reject weight of the sample was:

 

2 kg or less in weight, the reject was added to the master pulp for metallic screen fire assay (SFA).

 

Greater than 3 kg, excess material is stored as a coarse reject. In this case, there are two pulp materials; one is the pulp from the routine fire assay and the other is the minus fraction of screen fire assays.

 

The SFA method was used as the primary assay method for samples identified as being in a mineralized zone. The pulverized material was combined on a mat and homogenized by four-corner rolling. Following homogenization, the sample was dry screened using -150 mesh (106 μm) screens. The oversize material, including the screens, were combined forming the coarse, or (+), fraction. The undersize lots were combined on a mat and homogenized by four-corner rolling, forming the fine, or (-), fraction. From the (-) fraction, approximately 300 g was scooped using an envelope. Both the (+) and the (-) fraction were shipped to ALS Vancouver for fire assays. From the (-) fraction shipped to Vancouver, ALS took a split of less than 50 grams for other analyses.

1 November 2024

  263 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

The multi-element geochemical analysis Code ME-ICP61 utilized a 4-acid digestion (perchloric, nitric, hydrofluoric, and hydrochloric acids) with analysis by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP - AES). Note: In 2019, Code ME-ICP41 was implemented by NFG at ALS prior to switching to 61 elements in 2020.

 

The multi-element geochemical analysis Code ME-MS61 utilizes a 4-acid digestion (perchloric, nitric, hydrofluoric, and hydrochloric acids) with analysis by Inductively Coupled Plasma - Mass Spectrometry (ICP-MS).

 

Soil samples analysed at ALS Global utilized a trace gold plus multi-element package (ALS code: AuME-ST44).

 

 

Table 11.2 Analytical methods used by ALS.

 

Analyte Method Code Detection Limit Type of Method Finish
Au ICP-21 0.001 ppm 30 g fire assay ICP
Au AA-26 0.01 ppm 50 g fire assay AAS
Au Au-SCR24C 0.05 ppm Screen fire assay Gravimetric and AAS
Multi-element ME-ICP61 Variable for 33 elements 4-acid digestion ICP
Multi-element ME-MS61 Variable for 48 elements 4-acid digestion MS
Au AuME-ST44 0.0001 ppm 50 g aqua regia ICP

 

 

11.3.4.3 ALS Canada Ltd.: Specific Gravity and Bulk Density Measurements

 

Since May 2022, NFG has collected specific gravity (S.G.) measurements on pulps at ALS using a pycnometer (OA-GRA08b). The S.G. measurements were systematically conducted on roughly 1 sample every 50m, until June 2024 when only gold mineralized samples, as well as new or less common lithologies were selected for testing. A prepared pulverized sample (3.0 g) is weighed into an empty pycnometer. The pycnometer is filled with a solvent (either methanol or acetone) and then weighed. From the weight of the sample and the weight of the solvent displaced by the sample, the specific gravity is calculated.

 

The S.G. of NFG samples ranges from 1.62 to 3.18, with an average of 2.76 (n=5,668 measurements). Since October 20, 2022, NFG started collecting duplicate S.G. samples at a frequency of 1 in every 20 S.G. samples. Most of the duplicate data agree within ± 5%.

1 November 2024

  264 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Between March 2023 and May 2024, NFG collected 275 core samples for bulk density analysis at ALS using water displacement with a paraffin wax coating (OA-GRA09a). The sample lengths submitted for analysis were between 7 to 35 cm with an average length of 11 cm and were selected from the half of the cut core retained in the core box. The samples are first weighed, then coated in paraffin wax sealant and weighed again. The coated sample is slowly lowered into a bulk density apparatus filled with water. Water displaced by the sample is collected in a graduated cylinder and measured. The bulk density is calculated from the weight of the sample divided by water displaced (with volume of wax removed).

 

The bulk density of NFG samples ranges between 2.21 and 2.98, with an average of 2.68 (n = 275 measurements). NFG included 11 duplicate bulk density samples at a frequency of 1 in every 25 bulk density samples, duplicates are selected immediately adjacent downhole from the parent sample. Most of the duplicate results agree within ± 5%.

 

11.3.4.4 MSALABS: PhotonAssayTM Analysis

 

NFG conducted gold assays using the Chrysos PhotonAssayTM analytical method, which was originally developed at Australia’s national science agency, CSIRO. The Chrysos PhotonAssayTM method uses high-energy X-ray technology that causes excitation of atomic nuclei which emanate a unique signature that can be measured allowing the rapid analysis of gold in approximately two minutes. The benefits of utilizing the Chrysos PhotonAssayTM method include 1) a more cost-effective analysis of larger samples that are nearly 15 times the size of a standard 30-g fire assay, 2) better turnaround times, 3) the method is non-destructive which allows the same material to be re-assayed by other methods for gold or additional test work, and 4) the method is an environmentally friendly alternative to traditional lead fire assay methods.

 

A summary of the MSALABS method codes is presented in Table 11.3. Two jars, or approximately 900 grams, were assayed for routine or non-mineralized samples (with an expected assay of less than 1 ppm Au). The crushed sample was riffle-split using a standard riffle (Humboldt H-3987) and material was weighted into two plastic jars up to November 10, 2022. The two jars were assayed for PhotonAssayTM (MSA Method Code CPA-Au1D).

 

 

Table 11.3 MSALABS analytical methods used at the NFG Queensway Project.

 

Analyte Method Code Detection Limit Description
Au CPA-Au1 0.015 ppm Photon assay - single
Au CPA-Au1D 0.015 ppm Photon assay - duplicate
Au CPA-Au1E 0.015 ppm Photon assay - extinction

 

1 November 2024

  265 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

After a review of results for June to November 2022, a change was made so that one 450-g aliquot was collected by standard riffle split and transferred into a plastic jar for PhotonAssayTM (MSA Method Code CPA-Au1). The remainder of the crushed sample material was bagged and stored as coarse reject. If these routine samples had PhotonAssayTM results greater than 1 ppm Au (MSA Method Code CPA-Au1 or CPA-Au1D), this automatically triggered PhotonAssayTM for all remaining material (MSA Method Code CPA-Au1E). The coarse rejects were retrieved and distributed into multiple jars until material depletion for PhotonAssayTM. In November 2023, after a review of results, the trigger for extinction analysis was reduced to greater than 0.8 ppm Au.

 

For all samples in a mineralized zone, the full crushed sample was distributed into plastic jars for PhotonAssayTM (CPA-Au1E) regardless of how many jars were required. In November 2023, only samples with VG automatically are sent for CPA-Au1E. All irradiated material is available for re-assays within hours of the process being completed.

 

The sample vials are then sealed and weighed with each jar having a unique identifier. A reusable reference disc is used to maintain calibration during the activation and measurement processes. The applicable gold range when using the PhotonAssayTM method is 0.015 g/t to 35,000 g/t Au. Activation of the atomic nuclei is achieved using a high-energy linear accelerator x-ray source. The activated gold atoms emit a unique isomerism signature that can be measured to determine gold content. The source x-rays and signature gamma x-rays are extremely penetrating, which implies that a true bulk analysis is determined. The period of irradiation is typically 15-20 seconds. The sample is transferred to a detection station where the excited and emitting gold nuclei relax back to the ground state. During this process, gamma rays are emitted with a characteristic imaging of 279 KeV. The recording system records and counts the gamma rays which are then converted to the gold concentration of the sample.

 

The assays reported from all jars are combined on a weight-averaged basis.

 

Note: The first jar of selected samples is forwarded to ALS for pulverizing, routine multi-element ICP and specific gravity measurements (see Section 11.4.12).

 

11.3.4.5 PhotonAssayTM Versus Conventional Screen Fire Assay Comparisons

 

To the Effective Date of this technical report, NFG has analysed 177,901 core samples by PhotonAssayTM. Prior to releasing any PhotonAssayTM results publicly, NFG carried out an extensive test of the PhotonAssayTM assays against gold results from traditional fire assay. Samples were analysed using a minimum of two jars.

 

During the PhotonAssayTM analysis, the first jar of each selected sample is pulverized by ALS. For mineralized samples reporting over 100 ppm by PhotonAssayTM, all jars belonging to the samples are forwarded to ALS Sudbury for screen fire assays to validate results. The aliquot was pulverized to 85% passing -200 mesh (75 μm) using an LM2 ring-mill pulveriser (ALS Method Code PUL-21) and collected in the master pulp bag.

1 November 2024

  266 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

For the validation study in 2022, 551 single jars of representative material were sent to ALS, Vancouver, for fire assay determinations. All the samples were from early MSALABS batches reported between mid-June and mid-August 2022.

 

Entire jars of crushed material were sent to ALS, Sudbury for screened metallics assay (ALS Method Code Au-SCR24C) for 293 cases where higher gold grades were expected. Another 258 samples with lower grades were submitted for duplicate 30-g fire assays with ICP finish (ALS Method Code Au-ICP21) where coarse gold was not expected. A total of 83 OREAS CRMs and 22 blanks were inserted with samples. The reported results for the QC samples reported within expectations and show that the ALS assays are suitable for validation of the PhotonAssayTM assays.

 

The results by PhotonAssayTM and fire assay correspond well above 0.2 ppm Au (Figure 11.1). Most of the results agree within ± 10%.

 

Gold results were less than 0.2 ppm at ALS for 53% of the samples. Results less than 0.2 ppm Au by PhotonAssayTM are confirmed as less than 0.2 ppm Au at ALS. The detection limit for the ALS fire assays is 0.001 ppm Au and PhotonAssayTM has a quoted detection limit of 0.015 ppm Au. The PhotonAssayTM detection limit is determined by counting statistics of the detector for individual samples.

 

 

Figure 11.1 Comparison of MSALABS PhotonAssayTM vs ALS FA gold assays.

 

 

1 November 2024

  267 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Further review of the 192 samples with over 1 ppm Au shows that there are 20 samples where ALS and MSALABS results differ by more than ± 15%. Of these samples, 11 differ by more than ± 25%. These are mostly samples with less than 4 ppm Au.

 

Only two samples greater than 1 ppm Au were assayed by 30-g fire assay at ALS (E603892 and E603945) and the remainder were assayed by screened metallics. There is no apparent bias between the methods as there is a nearly even number of positive and negative differences.

 

Eleven samples reported Au values of between 140 and 210 ppm Au by PhotonAssayTM (Figure 11.2). All the screened metallics assays are higher than the PhotonAssayTM.

 

The calculated least squares regression suggests that the differences on average are about 5% higher by screened metallics vs. PhotonAssay™ for these high-grade sample jars. This result is anticipated as samples with high grade gold assays are often associated with very large gold grains and clusters. As gold is partially self-attenuating, there is an effective reduction in the gold grades with the PhotonAssay™ method.

 

Based on this study, it was concluded that there had been sufficient test work and quality control results to validate the PhotonAssayTM method for the Queensway samples.

 

 

Figure 11.2 Comparison of MSALABS PA vs ALS FA gold assays over 100 ppm.

 

 

1 November 2024

  268 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

11.3.4.6 Activation Laboratories Ltd.: Multi-Element Analysis

 

For some of the till samples, ActLabs used instrumental neutron activation (INAA) to measure multi-element chemistry (ActLabs code: 1H INAA(INAAGEO)/Total Digestion ICP(TOTAL). The method uses a 4-Acid “near total” digestion for total determinations of resistive elements followed by ICP analysis.

 

11.3.4.7 SGS Canada Inc.: Gold Analysis

 

SGS in Burnaby, BC was utilized as a check laboratory by NFG. Gold analysis was conducted using SGS code GE_FAI150V5 (exploration grade gold fire assay by ICP-AES with Pt and Pd) and GO_FAG50V (ore grade gold fire assay with a gravimetric finish).

 

11.3.4.8 Overburden Drilling Management: Till Gold Grain Counts

 

For the till samples that were concentrated and analysed by ODM, the gold grade was established by calculating the size of each grain and summing the gold content of all the grains to get an estimate of the total gold content of the sample, which could be converted to a calculated grade for the mass of the original sample (Holmes and Michaud, 2017). The ODM grain-based estimates of gold grade are not considered to represent precise measurements by the QP, but rather are semi-qualitative information in that they still provide useful information for drill targeting (e.g., areas in which till samples contained a lot of gold compared to those areas that contain no to very little gold).

 

11.3.4.9 General Comments on Screen Fire Assays

 

The SFA method was used as the primary assay method for samples identified as being in a mineralized zone. Since 2019, samples with 30-g fire assay results over 1 ppm Au and samples with expected high Au grade were analysed by screen fire assay (ALS method Au-SCR24C). In November of 2022, this threshold was raised to 2 ppm Au. For the metallic screen fire assay procedure, if the sample was 3 kg or less in weight, the entire sample was crushed in a Boyd Mk 4 or Terminator jaw crusher to 70% passing 10 mesh (2 mm; CRU-21). Up until January 19, 2021, if the received weight was larger than 3 kg, the crushed sample was split into two lots (‘A’ and ‘B’), which were both processed and analysed by the screen fire procedure.

 

As of January 19, 2021, a maximum of 3 kg was pulverized to 85% passing 200 mesh (75 µm) and submitted for screen fire assays with any excess material stored as a coarse reject. Approximately 60% of samples submitted for metallic screen fire assay weigh less than 3 kg and 5% of samples weigh more than 4.45 kg. Since February 2022, NFG changed the preparation procedure for routine samples to crushing to 70% passing 10 mesh (CRU-31) to align with procedures used for screen fire assay samples.

 

As of February 2024, drill core samples are no longer analysed by fire assay, instead being analysed by PhotonAssay™.

1 November 2024

  269 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

11.4 Quality Assurance and Quality Control

 

NFG inserted QA-QC samples once into every 10 NFG samples on average, that included Sample Blanks, OREAS Certified Reference Materials (CRMs), and Core Duplicate samples. The Sample Blank material is quartz sandstone from the Botwood Group at Peter’s River Quarry in central Newfoundland. Between 500-600 g of Sample Blank material is submitted to the laboratory for each blank insertion within the sample stream for routine fire assay. Approximately 3 kg of blank material is submitted for each blank insertion of those samples that are submitted for Screen Fire Assays (SFA). The CRMs were purchased from Ore Research and Exploration Pty Ltd. and represent certified, homogenous quality control material that is distributed in sealed packets. In addition, NFG conducted lab-check assays and completed a comparison between conventional screen fire assays and PhotonAssayTM analyses. Finally, the laboratories conducted pulp duplicate and coarse reject duplicate analyses.

 

NFG has commissioned Analytical Solutions to design and review the QA-QC program at the Queensway Property. The QA-QC protocols and interpretation of results are performed by NFG under the direction of Lynda Bloom, P. Geo. Quality Control data are evaluated on receipt from the laboratories for failures. Appropriate action is taken if assay results for CRMs and blanks fall outside allowed tolerances. All results stated have passed NFG’s quality control protocols. The QP has reviewed the QA-QC work conducted by Analytical Solutions and concludes that NFG’s QA-QC program is consistent with industry best practices.

 

11.4.1 Certified Reference Materials

 

Between 2019 and the present, NFG has utilized 12 different OREAS CRM samples that were developed exclusively for the mining, exploration and analytical industries and are distributed worldwide in over 135 countries. The CRMs are presented in Table 11.4.

 

Table 11.4 Overview of OREAS Certified Reference Materials that were inserted into the analytical sample stream by NFG.

 

1 November 2024

  270 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

11.4.1.1 Certified Reference Materials: Fire Assay and Photon Assay at ALS

 

A current example of NFG’s CRM sample analysis by fire assay at ALS is presented in Table 11.5. Over this period, NFG inserted 7,585 OREAS CRMs into the sample stream; there were less than 1.5% failures, and all were followed up appropriately. The average reported values for the 10 CRMs used reported within an acceptable ±4% of the accepted values (Table 11.5). There is no evidence of bias for the reference materials in this period.

 

A summary of NFG’s CRM sample analysis by PhotonAssay™ at ALS is presented in Table 11.6. Over this period, NFG inserted 592 OREAS CRMs into the sample stream; there were less than 2.9% failures, and all were followed up appropriately. The average reported values for the 7 CRMs used reported within an acceptable ±3% of the accepted values (Table 11.6). There is no evidence of bias for the reference materials in this period.

 

NFG inserted an additional 1,783 CRMs since the previous technical report (April 18, 2024) including OREAS 211 (n=28 analyses), OREAS 230 (n=614 analyses), OREAS 235 (n=18 analyses), OREAS 236 (n=522 analyses), OREAS 239b (n=531 analyses), OREAS 242 (n=24 analyses), and OREAS 247 (n=46 analyses). There were 3 failures (0.1%) that were followed up appropriately. The average reported values for the 7 CRMs used reported within an acceptable ±3% of the accepted values.

 

11.4.1.1 Certified Reference Materials: Fire Assay at Eastern Analytical

 

NFG stopped using Eastern Analytical in October 2021; however, the Company continued receiving assays from Eastern Analytical until May 5, 2022. Based on 403 CRM analyses, there was no evidence of systematic contamination nor is there any bias of the average concentrations of CRMs (Table 11.7).

 

NFG inserted an additional 67 CRMs since the previous technical report (April 18, 2024) including OREAS 230 (n=3 analyses), OREAS 232 (n=4 analyses), OREAS 232b (n=5 analyses), OREAS 235 (n=13 analyses), OREAS 237 (n=2 analyses), OREAS 237b (n=10 analyses), OREAS 239 (n=2 analyses), OREAS 239b (n=15 analyses), and OREAS 245 (n=13 analyses). There were no failures. The average reported values for the 9 CRMs used reported within an acceptable ±3% of the accepted values.

 

11.4.1.1 Certified Reference Materials: PhotonAssayTM at MSALABS

 

A summary of NFG’s CRM sample analysis by PhotonAssay™ at MSA is presented in Table 11.8. Over this period, NFG inserted 6,979 OREAS CRMs into the sample stream; there were less than 1% failures, and all were followed up appropriately. The average reported values for the 9 CRMs used reported within an acceptable ±3% of the accepted values (Table 11.8). There is no evidence of bias for the reference materials in this period.

1 November 2024

  271 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 11.5 Summary statistics on CRMs assayed at ALS using the fire assay technique.

 

 

 

 

1 November 2024

  272 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Table 11.6 Summary statistics on CRMs assayed at ALS using the PhotonAssay™ technique.

 

 

 

 

Table 11.7 Summary statistics on CRMs assayed at Eastern Analytical.

 

 

 

NFG inserted an additional 154 CRMs since the previous technical report (April 18, 2024) including OREAS 211 (n=2 analyses), OREAS 230 (n=45 analyses), OREAS 236 (n=52 analyses), OREAS 239b (n=49 analyses), and OREAS 242 (n=2 analyses). There were no failures. The average reported values for the 5 CRMs used reported within an acceptable ±3% of the accepted values.

 

11.4.2 Sample Blanks (Eastern Analytical, ALS, and MSALABS)

 

For ALS, the analytical results for 10,056 blanks were reviewed and yielded less than 0.1 ppm Au and are therefore deemed acceptable. Based on these results, the laboratory has no documented sample or laboratory contamination errors within the NFG sample assay streams.

 

With respect to MSALABS and the PhotonAssayTM analytical work, a total of 7,185 Sample Blanks were inserted into the analytical sample stream. The allowed upper limit is 0.1 ppm Au for blanks assayed by PhotonAssayTM (CPA-Au). Results for the blanks inserted were reviewed and all passed the quality control limits.

1 November 2024

  273 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 11.8 Summary statistics on CRMs assayed at MSALAB using the PhotoAssayTM, technique.

 

 

 

 

11.4.3 Core Duplicates

 

A study conducted in 2022 and reported on in February 2023 for 475 half core duplicates indicated there was no systematic bias in the previous Queensway assays, and that the large differences sometimes seen between half-core duplicates is due to a combination of 3 factors:

 

1. The inherent short-scale variability common in orogenic gold deposits like Queensway.

 

2. The tendency of half-core duplicate studies to select high-grade samples for checking, which creates a selection bias that leads to second assays tending to come back lower than the first high-grade result.

 

3. The linkage between variability and grade. With high-grade samples having more erratic distribution of larger gold grains than low-grade ones, fluctuations in the results from high-grade intervals will dominate conventional statistical comparisons like differences between the averages, or correlation coefficients.

1 November 2024

  274 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

The correlation between the assays for the two halves of the core is good and there is also considerable scatter in the cloud, with several outliers. Many of the erratic samples are those with abundant visible gold (VG), which is consistent with the view that the explanation lies in the natural short scale in situ variability of gold mineralization, and not in sample collection, preparation, or analysis. Other factors that also contributed to variability and uncertainty were poor rock quality and uncertainty in the exact boundaries of the original sample interval.

 

A total of 8,570 duplicate half core samples have been collected. When field duplicates are indicated by geologists on sampling sheet, both sides of the drill core are sampled. The side with tick marks, consistently the right side of the core, is sampled as the parent sample per normal sampling procedures. The left side is sampled as the core duplicate. The duplicate sample is assigned the next subsequent sample number. As no drill core remains in the core box, the core cutting technician sweeps the bottom of the core box using a small brush to remove all remaining material and distributes half to each of the core samples.

 

Sample intervals for duplicates are selected systematically for approximately 1 in 50 samples. Approximately 50% of the core duplicates samples were submitted to ALS for sample preparation and analysis and the remainder were analysed by MSALABS. Overall, there is no apparent bias for the core duplicate data set (Figure 11.3). The differences between assays for the two core halves are almost exactly divided into thirds for positive differences, negative differences, and no differences.

 

Duplicate results closer to the detection limit have greater disparity than samples with higher concentrations. As general rule, precision for analytical methods improves as concentrations increase. More mineralized samples have higher gold concentrations so that the analytical uncertainty is less, but these samples also likely have more particulate gold so that sampling issues prevail.

 

When samples are analysed by 30-g fire assay (ALS Method Code ICP-21) there is a greater scatter of results than for samples analysed by screened fire assay (ALS Method Code SCR24C), on up to 3 kg of material, and by PhotonAssayTM on large, 450-g samples or to extinction. Ninety percent of the duplicate core samples were analysed by 30-g fire assay. As drill core samples for duplicates were selected systematically, 90% of results are less than 0.3 ppm Au and therefore were assayed by the 30-g fire assay method.

 

Figure 11.4 shows the comparison of gold assays when the analytical methods use larger samples, or the entire sample is analysed. The precision is significantly improved except for Au grades less than about 0.1 Au ppm for PhotonAssayTM. The lower detection limit for PhotonAssayTM is higher than for the fire assay methods which accounts for the poor precision at very low concentrations.

 

1 November 2024

  275 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 11.3 Comparison of two halves of the core for gold.

 

 

 

Figure 11.4 Core duplicate assays compared for larger sample aliquots.

 

 

1 November 2024

  276 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

There are 600 core duplicates analysed by screened fire assay or PhotonAssayTM with the average gold grade over 0.3 ppm. About half of the duplicate pair assays agree within ± 25% for both methods (Figure 11.4). A higher percentage of duplicates analysed by PhotonAssayTM agree within ± 50% compared to screened fire assay. The screened fire assay is done on 3 kg of sample material and some reject may not be assayed. One third of the samples assayed by PhotonAssayTM were done to extinction so that the entire sample was assayed for both halves of the core.

 

The erratic samples are those with abundant visible gold (VG), which is consistent with the view that the explanation lies in the natural short scale in situ variability of gold mineralization, and not in sample collection, preparation, or analysis.

 

The precision of assays for pulps and rejects contributes to variability when comparing core duplicate assays. The importance of using large samples to achieve more reliable assays is apparent.

 

NFG core technicians are provided with detailed core sampling protocols. It is recommended that these procedures be reviewed with all staff on a regular basis and supervision is provided when cutting core for highly mineralized sample intervals.

 

11.4.4 Precision of Laboratory Duplicates: By Fire Assay

 

The internal QA-QC programs conducted by the laboratories included internal checks of duplicates taken from the same prepared pulp. These pulp duplicates provide an estimate of the reproducibility related to the uncertainties inherent in the analytical method and the homogeneity of the pulps. The precision or relative percent difference calculated for the pulp duplicates indicates whether pulverizing specifications should be changed and/or whether alternative methods, such as screen metallics for gold, should be considered.

 

ALS analysed 5% of sample pulps in duplicate as part of its internal quality control program. Figure 11.5 compares the results for 4,869 duplicates for fire assays. The low detection limit 30-g fire assay ICP method (ALS Method Code ICP21) was used for 90% of the samples and the remainder were analysed with a 50-g fire assay with AAS finish (ALS Method Code AA26) that has a higher detection limit and is used primarily for screened metallics assays. The upper limit for the ICP21 method is 10 ppm Au.

 

The duplicates for the AA26 method tend to show better reproducibility than for the ICP21 method above 0.1 ppm Au. Although the lower detection limit for the ICP21 method is ten times lower than the AA26 method, the AA26 method is primarily used to assay samples after they have been sieved to remove coarse gold, thus accounting for the improvement. In general, assays over 0.1 g/t Au repeated within ± 15 to 20%, which is acceptable performance. Of the 354 samples with an average gold grade over 1 ppm, almost all the duplicate results agree within an acceptable ± 20%.

 

 

1 November 2024

  277 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 11.5 Comparison of 30-g and 50-g gold assays on pulps.

 

A) 30-g pulp assays

 

 

B) 50-g pulp assays.

 

1 November 2024

  278 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

ALS also analyses two splits of the crushed material for 1 in 50 samples as part of its’ internal quality control program. All the 1,844 preparation duplicates were analysed by the ICP21 or AA26 fire assay method (Figure 11.6). The material sampled for the preparation duplicates is -2 mm which is much larger than the expected particle size of 75 microns for pulps. As a result, there is greater scatter in the gold results for preparation duplicates relative to pulp duplicates.

 

 

Figure 11.6 ALS Internal preparation duplicates (± 20% error bars in blue).

 

 

 

 

11.4.5 Precision of Laboratory Duplicates: By PhotonAssayTM

 

MSALABS irradiated every 20th jar of crushed material twice and uses the information as analytical duplicates for its internal QC. A total of 8,720 duplicate analyses were completed for all methods. Of these, there were 6,019 primary analyses that reported less than 0.1 ppm Au and 98% of the assays for the duplicate result also reported below 0.1 ppm Au. The 2,701 analytical duplicates with more than 0.1 ppm Au agree within ± 20% for 90% of the cases and perform within expectations of the method (Figure 11.7).

 

A total of 4,321 jar duplicates were analysed by MSALABS by PhotonAssayTM. Jar duplicates are created by producing a second split of the crushed material in a new jar. Of the 3,968 samples with the first split reporting below 0.1ppm Au, the duplicate assay also reported below 0.1ppm Au for 99% of the cases (Figure 11.8).

 

There were 353 samples that reported above 0.1 ppm Au and duplicate paired data for 56% of the samples agree within ±20%.

1 November 2024

  279 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 11.7 MSALABS analytical duplicates.

 

 

 

There are 22 cases where the average gold for two jars is over 2 ppm Au. Of these cases, there are 6 examples where the difference between the assays of the two jars, relative to the average, are outside ± 50%.

 

The variability is expected for an orogenic gold deposit with visible in gold in mineralized drill core. The variability demonstrates the importance of using assay-to-extinction methods (either multiple jars by PhotonAssayTM or screened metallics of large sample splits) for higher grade samples. The duplicate data are used to optimize the PhotonAssayTM assay strategy and will continue to be monitored.

 

All the quality control data for assays performed at MSALABS are within expected ranges and data are acceptable for NFG’s exploration programs.

 

Since the previous technical report (April 18, 2024), a total of 181 duplicate analyses were completed for all methods. Of these, there were 151 primary analyses that reported less than 0.1 ppm Au and 100% of the assays for the duplicate result also reported below 0.1 ppm Au. The 30 analytical duplicates with more than 0.1 ppm Au agree within ± 20% for 90% of the cases and perform within expectations of the method.

1 November 2024

  280 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

A total of 104 jar duplicates were analysed by MSALABS by PhotonAssayTM. Jar duplicates are created by producing a second split of the crushed material in a new jar. Of the 93 samples with the first split reporting below 0.1ppm Au, the duplicate assay also reported below 0.1ppm Au for 99% of the cases (Figure 11.8).

 

There were 11 samples that reported above 0.1 ppm Au and duplicate paired data for 55% of the samples agree within ±20%.

 

 

Figure 11.8 Duplicate jar assays by PhotonAssayTM.

 

 

 

 

11.4.6 Check Assays

 

A selection of samples is submitted to a secondary laboratory for check assays. In 2023-2024, sample pulps for routine check assays were sent to SGS, Burnaby. SGS is a ISO17025-accredited laboratory with operations worldwide.

1 November 2024

  281 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Sample pulps are selected randomly for check assays from seven grade bins. A low percentage of samples are selected for lower grades which make up a large proportion of the sample population. Up to 5% of samples from higher grade ranges are selected.

 

There were 6 different OREAS CRMs inserted 11 times with samples submitted to SGS. The gold concentrations ranged from 0.76 to 43 ppm Au. All the assays for CRMs were reported by SGS within -8 to +6% of the expected values for gold except for one of the high-grade CRMs that reported 14% lower than the accepted value. Overall, SGS performed very well, and the assays are suitable for the check assay program.

 

There were 130 low grade samples analysed by 50-g fire assay (ALS Method Code ICP21) submitted for 50-g fire assay (SGS Method Code GE_FAI50V5) or with a gravimetric finish (SGS Method Code GO_FAG50V) at SGS (Figure 11.9). The results are mostly less than 1 ppm Au and 80% agree within ± 20%. There is no apparent bias and the SGS results support the ALS assays.

 

 

Figure 11.9 Comparison of 50-g Fire Assays at ALS and SGS (± 20% error bars in blue).

 

 

 

 

 

Check assays are also performed on the fine fraction that is generated from the screened metallics assays. Higher gold concentrations are best represented by the samples submitted for screened metallics assays. The coarse gold, or (+), fraction is assayed entirely for the screened metallics method and only the fine, or (-), fraction is available for check assays. Using the fine fraction for check assays has the added benefit that pulps are more representative and there are fewer issues with poor homogeneity.

1 November 2024

  282 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

A total of 283 fine fractions prepared and assayed were submitted to SGS, Burnaby, BC, for 50-g fire assay gold determinations. The selected samples provide good coverage of the gold concentration range. About 90% of the results agree within ± 20% and there is no evidence of bias (Figure 11.10).

 

A selection of samples analysed by PhotonAssay™ at MSA Val d’Or, QC were selected for check assay as ALS. They were shipped to ALS Sudbury, ON for preparation, then forwarded to ALS Vancouver, BC for analysis. A total of 183 samples were analysed by fire assay.

 

 

Figure 11.10 Check Assays for Fine Fractions at SGS (± 20% error bars in blue).

 

 

 

 

There were four different OREAS CRMs inserted 10 times with samples submitted to ALS. The gold concentrations ranged from 0.337 to 43 ppm Au. All the assays for CRMs were reported by SGS within -3 to +3% of the expected values for gold. Overall, ALS performed very well, and the assays are suitable for the check assay program.

 

A total of 150 samples were analysed by low grade 30-g ICP21. The remaining 33 higher grade samples were analysed by screen metallic (SCR24). If there was an issue with the plus fraction being too small for analysis, only the fine fraction was reported (this only occurred with one sample, which shows a strong negative change due to the loss of the positive fraction). 85% of samples reported within +/- 20% of the original value (Figure 11.11). Overall, there is no evidence of bias with the PhotonAssay™ method at MSA Val d’Or.

1 November 2024

  283 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

The calculated least squares regression suggests that the differences on average are about 5% higher by screened metallics vs. PhotonAssay™ for these high-grade sample jars. This result is anticipated as samples with high grade gold assays are often associated with very large gold grains and clusters. As gold is partially self-attenuating, there is an effective reduction in the gold grades with the PhotonAssay™ method.

 

Based on this study, it was concluded that there had been sufficient test work and quality control results to validate the PhotonAssayTM method for the Queensway samples.

 

Figure 11.11 Check assays for MSA PhotonAssay™ samples by fire assay at ALS.

 

 

 

 

From 2022 and 2023, 41 sample jars that reported over 100 g/t Au were submitted for screen fire assays at ALS. The comparison between screen fire assay and PhotonAssay™ for these jars shows that there is a tendency for screen fire assay to report higher than PhotonAssay™ (Figure 11.12). This tendency was noted in the validation study and is attributed to the effect of self-shielding or attenuation which should only occur when gold particles are more than ~300 microns. The impact of this apparent bias is nominal given the few numbers of jars that have assays over 100 g/t Au and are averaged with other sample jars for the same sample interval.

1 November 2024

  284 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 11.12: Comparison of Screen Fire Assay and PhotonAssay™ for over 100 ppm Au.

 

 

 

11.4.7 Percentage of Coarse Gold

 

An examination of the details of the screen fire assay results helps shed light on why it is difficult to get good repeatability with the Queensway samples that have strong gold mineralization. Figure 11.13 shows the percentage of the total mass of gold in a sample that ended up in the coarse fraction of the screen fire assays, as a function of the sample’s grade. The samples shown in orange were logged as containing visible gold; for the black ones, visible gold was not noted.

 

Above 10 ppm Au, most of the samples assayed before May 2022 have more than 30% of the gold in the coarse fraction. The presence or absence of a single large grain of gold will have a strong impact on the grade of the sample, that impact getting larger as the size of the gold grains gets larger.

 

With coarse grains accounting for most of the gold content, assays become more reliable as the size of the analysed sample increases.

 

11.5 Opinion on the Adequacy of New Found Gold Corp.’s Sample Collection, Preparation, Security, and Analytical Procedures

 

The QP has reviewed the adequacy of the sample preparation, security, and analytical procedures conducted by NFG between the start of the Queensway exploration programs (2019) and the Effective Date of this technical report and found no significant issues or inconsistencies that would cause one to question the validity of the data. A reasonable practical level of sample security from the field to the analytical laboratories is maintained by NFG.

1 November 2024

  285 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

The analytical work conducted on behalf of NFG is completed by independent, commercial, and accredited laboratories. NFG has employed reasonable gold standard sampling practices, analytical methods, and QA-QC protocols, the latter of which incudes CRMs, Sample Blanks, core duplicates, pulp duplicates, coarse reject duplicates, and check-laboratory assays. Additionally, NFG has conducted a robust comparison between conventional screen fire assays and PhotonAssayTM analyses that provides a reasonable and sufficient level of confidence in the PhotonAssayTM technique. NFG’s QA-QC work was designed and reviewed by Lynda Bloom, P. Geo., of Analytical Solutions, who specializes in analytical geochemistry, quality assurance and quality control.

 

 

Figure 11.13 Percentage of gold in the coarse fraction (above 106 microns) in ALS screen fire assays, as a function of sample grade (Source: Lynda Bloom).

 

 

The QP’s review of the QA-QC results provides the opinion that the data is of reasonable quality, minimal contamination occurred during sample preparation and at the laboratories, and the analytical results are repeatable with good precision and accuracy.

 

The QP is therefore satisfied with the adequacy of the sample preparation, security, and analytical procedures as implemented by NFG. The resulting exploration and drillhole assay databases are reasonable and sufficient for ongoing exploration activities and target generation. The core logging and drill core assay database is of reasonable quality to formulate three-dimensional models, define the geometry of mineralized zones, and for use in potential future mineral resource estimations.

1 November 2024

  286 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

11.6 Opinion on the Adequacy of Labrador Gold Corp.’s Sample Collection, Preparation, Security, and Analytical Procedures

 

The QP has reviewed the sampling and analytical procedures, and QA-QC work that was completed by LabGold at the Kingsway Gold Project (now part of NFGs Queensway North block) as presented in Tettelaar (2024).

 

In the QPs opinion the procedures for sample preparation, analysis and security for till, soil, rock, and drill core are reasonable and meet the industry standards for exploration best practices (CIM, 2018). The laboratories, including Bureau Veritas Ltd., SGS Canada Inc., Eastern Analytical Ltd., ALS Canada Ltd., and Overburden Drilling Management Ltd. are reputable, commercial, and independent Canadian labs that are accredited in accordance with International Standard ISO/IEC 17025:2017.

 

In the QPs opinion the scope, extent, and purpose of the QA-QC procedures were reasonable and effective within LabGold’s early-stage exploration work programs. QA-QC protocols included the insertion of duplicate samples (n=404 for soil and drill chip samples), Certified Reference Material (CRM) sample standards (n=3,089 for rock, soil, and drill chip/core analytical samples), and blank samples (n=1,794 blanks) into the analytical sample stream. The duplicate samples analyses show good field sample collection and sample preparation protocols were used, and the sampling and analytical precision were reproducible. The CRM analytical results provide assurance of the accuracy of the data. The sample blanks show there is minimal contamination. A portion of the diamond drill core pulp material was assayed at a secondary laboratory (n=1,927 pulp samples) and demonstrated no apparent bias in the gold assay results between the two laboratories. No property-specific geological standards were prepared or included in the sampling programs.

 

To end, the QP believes the LabGold legacy data, including soil, rock, and core sampling and analytical data, are of value to NFG and the Queensway Gold Project. Verification procedures such as re-sampling of LabGold’s archived drill cores and twinning of drillholes will allow NFG to audit the legacy data to enable the company to accept responsibility for its use within the program and within any future mineral resource studies.

1 November 2024

  287 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

12 Data Verification

 

12.1 Data Verification Procedures

 

NFG’s Queensway Gold Project is an early-stage exploration project, and this report presents a summary of the Company’s exploration programs through to an Effective Date of 1 November 2024. The primary datasets involve 1) historical exploration results, and 2) NFG’s exploration programs including till, soil, rock, and drill core sample collection and analytical work. This section describes the steps taken by the QP to verify the data in this technical report.

 

12.2 Historical Exploration Information

 

Information related to the historical mineral occurrences was downloaded directly from the Government of Newfoundland and Labrador Geoscience Atlas, predominantly as GIS shapefiles (https://geoatlas.gov.nl.ca). The historical mineral occurrences in Newfoundland and Labrador and compiled and published by Department of Industry, Energy and Technology. The Mineral Occurrence Data System (MODS) includes an inventory of historical mineral occurrences in the province. The digital database contains information on approximately 6,000 mineral occurrences, and a collection of mineral occurrence maps. The QP has not validated all historical mineral occurrences within, and adjacent to, the Queensway Property; rather the QP is dependent on the Government of Newfoundland and Labrador geologists and staff that have meticulously compiled the mineral occurrences through a series of compilation efforts originating in 1976 and maintained to the present.

 

Historical drillhole information was provided to the QP by NFG’s management team during the onset of the report preparation in December 2022. These data were originally compiled by NFG from numerous assessment reports. The only method currently available for the QP to validate the historical drill locations and complementary information is by comparing the historical drillhole information against the publicly available government GIS database, and hardcopy assessment reports related to the historical projects. The QP downloaded historical drillhole information from the Government of Newfoundland and Labrador Geoscience Atlas as GIS shapefiles (https://geoatlas.gov.nl.ca). Several drillholes reported in the NFG historical drillhole data compilation were not included in the government dataset. The QP confirmed the existence of within-Property historical drillholes using the publicly available assessment reports related to these historical drill programs.

 

Historical soil, rock, till, trench channel, stream sediment and lake sediment sampling and gold assay datasets were provided to the QP by NFG’s management team as csv files during the onset of the report preparation. These data were originally compiled by NFG from numerous assessment reports. The data were only partially validated by the QP by comparing the data in the electronic dataset versus the publicly available, hardcopy assessment reports.

1 November 2024

  288 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

12.3 New Found Gold Corp.’s Ground Geochemical, Drillhole, and Drill Core Assay Databases

 

NFG forwarded numerous datasets to the QP including 1) all surface geochemical survey assay digital datasets (till, soil, rock outcrop and float, and trench channel rock sample assays), 2) a reviewer’s license for the MX-Deposit system that NFG uses to manage its drillhole and surface sampling data base as well as sample dispatch and assay status, 3) all assay laboratory certificates, and 4) copies of the QA-QC datasheets.

 

The QP validated the surface geochemical sample assays by comparing NFG electronic assay data against the hard copy laboratory certificates. In addition, the location of some of the anomalous surface geochemical assay data was validated in comparison to the historical mineral occurrences. The QP communicated any errors to NFG within the surface geochemical databases, who in-turn, made the appropriate revisions.

 

The geological QP validated the NFG drillhole collar database by independently documenting the collar locations of 6 random drillholes during a QP site inspection (see Section 12.4). All drill core assay data were exported from NFG’s MX-Deposit software and divided into smaller assay datasets that were based on individual prospects. The assay files were then validated by the QP against the hardcopy laboratory certificates. There were no gold assay errors. The QP communicated any errors to NFG within the drillhole collar/assay databases, who in-turn, made the appropriate revisions.

 

The QP validated the laboratory density measurements by comparing the electronic data file provided by NFG against the hard copy laboratory certificates. No errors were observed.

 

12.4 Qualified Person Site Inspection

 

All 3 authors have completed Qualified Person site inspections at the Queensway Property: Most recently, Mr. Eccles on January 12-13, 2023, Mr. Simmons on October 19, 2023, and Mr. Jorgensen on November 29, 2023. From a geological perspective, the QP’s personal inspection at NFG Queensway Gold Project enabled Mr. Eccles to:

 

Verify the overall setting of the Queensway Property in terms of licencing, topography, access, facilities (office, core shacks), and proximity of major gold prospects within the Property to the towns of Appleton and Gander, NL.

 

Observe the general geological setting of Queensway Property and the gold mineralization at the mineral prospects that are the subject of this technical report.

 

Observe and understand the exploration work that has been undertaken by NFG at the Queensway Property including geological mapping, rock sampling, soil sampling, geophysical surveys, and drilling.

1 November 2024

  289 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Observe current exploration in the form of a multi-drill, diamond drill coring program.

 

Collect independent QP core samples from the Lotto, Keats Main, Keats West, and Keats Main South prospects.

 

Discuss program details with NFG staff including 1) sample collection, security, preparation, analytical, and QA-QC procedure, 2) exploration practices, 3) core geology, and 4) ongoing development of a 3D geological modelling.

The QP documented the coordinate locations of 6 separate and random drillhole collars at the Keats Main and Keats North prospects. A comparison between the QP GPS locations and NFG’s surveyed collars is presented in Table 12.1. The due diligence collar location review showed minimal variation between the QPs GPS collar coordinates and those that were surveyed and documented within NFG’s drillhole database. In metres, the difference between the QP and NFG selected drillhole collars was between 0.4 and 3.4 m, which translates to reasonably low percentage of differences in the collar locations. It is the QPs opinion that the drill collar locations observed are properly documented within NFG’s drillhole database.

 

 

Table 12.1 Qualified Person validation of 6 drillhole collar locations at the Keats Main and Keats North prospects.

 

 

 

 

At NFG’s Appleton Business Park archival drill core facility, the QP reviewed select drill cores from 4 separate drillholes that penetrated, and help to define, the Keats Main, Keats North, Keats West, and Lotto prospects. A total of 4 samples were collected independently by the QP (Table 12.2). In Gander, NL, at NFG’s primary core facility, the QP reviewed drill core from 6 separate drill cores from the Keats West, and Golden Joint prospects. An additional 2 core samples were collected by the QP from the Keats West prospect (Table 12.2).

1 November 2024

  290 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

The QPs review of NFG’s drill core demonstrated the Outflow Formation is defined as a turbiditic package of interlayered grey mudstone-siltstone sequences with basal siltstone-sandstone. The sedimentary rock package along or adjacent to the Appleton Fault Zone includes textures associated with folding and fault zones (fault gouge); however, the most distinguishing textures are related to the injection of carbonate-quartz veins. More specifically, textures include massive vuggy quartz veins, brecciated quartz veining, laminated quartz veins, and randomly orientated stockwork veining.

 

During the site inspection, gold was observed in cores from most of the drillholes observed by the QP. The gold occurred as 1) finely disseminated grains within distinct patches of silvery-grey sulphide material within the vein presumed to include arsenopyrite and lead-antimony sulfosalt (boulangerite), 2) finely disseminated grains along fracture planes, or 3) as millimetre-sized blebs, particularly within the massive, vuggy quartz veins.

 

The Keats Main prospect occurs along the KBFZ, which splays in a north-easterly direction off the Appleton Fault Zone (Figure 12.1). A fault damage zone, which occurs on both sides of the KBFZ, was observed in core, and reportedly extends for approximately 30 to 50 m total across both sides of the fault zone.

 

With respect to geochemical validation of the gold mineralization at the Queensway Property, the QP-collected samples were bagged, labelled, sealed, and placed in a 5-gallon pail for shipping by the QP. The pail was sealed by the QP using packing tape and the pail was couriered via Purolator from Gander, NL to MSALABS in Val-d’or, QC for analysis by Chrysos PhotonAssayTM using the same analytical methodologies used by NFG. With respect to chain of custody the QP managed the QP-collected samples from collection through to sample shipping.

 

The 6 QP-collected samples yielded between 1.04 and 3.76 ppm Au using the PhotoAssayTM analytical technique (Figure 12.1; Table 12.2). The independent sample collection and analytical work conducted by the QP confirms the gold mineralization that is the subject of the NFG Queensway Property technical report.

 

12.5 Data Limitations

 

Due to the lack of QA-QC information pertaining to historical exploration work, and particularly the historical grab rock sample geochemical data, it is the opinion of the QP that these historical gold assay data should not be utilized as part of future work conducted by NFG, including any potential mineral resource estimations.

 

Only those historical drillholes whose location and assay information can be confirmed to be reliable, and for which the original logging information can be integrated into the NFG logging system, should be considered for incorporation into NFG’s project data base.

1 November 2024

  291 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 12.1 Drillhole collar locations of Qualified Person-collected core samples and gold assay results.

 

 

1 November 2024

  292 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

Table 12.2 Summary of Qualified Person-collected core samples to validate gold mineralization.

 

 

 

12.6 Adequacy of the Data

 

The QP has reviewed historical exploration information associated with the Queensway Property, and surrounding area, and concludes that the survey information yields valid information as related to the geology of the Property and are therefore sufficient to be used in background geological interpretations.

 

The QP has reviewed the adequacy of NFG’s sample preparation, security, and analytical procedures and found no significant issues or inconsistencies that would cause one to question the validity of the data. The exploration work was conducted in accordance with CIM Mineral Exploration Best Practice Guidelines (2018). The analytical work was conducted at independent, commercial, and accredited laboratories that used reasonable gold standard sampling practices and analytical methods.

 

During the site inspection, the QP discussed logging protocols, density measurements, sampling procedures, and QA-QC measures with the NFG team. All-in-all, the Company, and the on-site team, has used the appropriate methodologies with respect to sample preparation, analyses, and security to ensure the integrity of the data.

 

With respect to QA-QC work, NFG has properly utilized and interpreted CRMs, Sample Blanks, core duplicates, pulp duplicates, coarse reject duplicates, and check-lab assays. Additionally, NFG has conducted a robust comparison between conventional screen fire assays and PhotonAssayTM analyses that provides a reasonable and sufficient level of confidence in the PhotonAssayTM technique. The review of the QA-QC results enables the QP to form the opinion that the NFG exploration data is of reasonable quality, minimal contamination occurred during sample preparation and at the laboratories, and the analytical results are repeatable with good precision and accuracy.

1 November 2024

  293 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

It is the QPs opinion that the NFG exploration data and resulting datasets provide a reasonable and accurate representation of the Queensway Project and are of sufficient quality to support the technical summary, conclusions, and recommendations presented in this technical report.

 

1 November 2024

  294 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

13 Mineral Processing and Metallurgical Testing

 

Starting in 2023, NFG has completed two phases of metallurgical test work in relation to the Queensway Project. The Phase 1 work evaluated three mineralized zones, the Keats, Golden Joint, and Lotto zones. The Phase 2 work studied mineralization from the Iceberg and Iceberg East zones. The test work was completed by independent laboratories who prepared internal metallurgical reports on behalf of NFG that include Amtel (2023), Black Swan Metallurgy (2023), Base Met Labs reports (2024a,b), and Amtel (2024).

 

13.1 Historical Metallurgical Work

 

There is no known historical metallurgical test work for the Queensway Project prior to New Found Gold initiating test work in June 2023.

 

13.2 Sample Selection and Preparation

 

Gold mineralization for metallurgical analysis was identified at the Queensway Project in four mineralized zones known as Keats, Golden Joint, Lotto, and Iceberg (including Iceberg East; Figure 13.1). High-grade intercepts containing visible gold in quartz veins were observed in drill core samples.

 

Preliminary geological evaluations would indicate that gold mineralization is vein-hosted and associated with faults and cross faults. Lithology does not appear to play a major role in mineralization.

 

The host rock in these mineralized zones is primarily siltstone, with occasional beds of greywacke. Greywacke containing elevated levels of chromium and nickel was observed proximal to the Appleton Fault Zone. Based on the interpreted deep marine depositional environment of the stratigraphy of these zones, the lithologies are prone to containing organic matter. Weakly carbonaceous material within the stratigraphy was made evident by the presence of graphitic clasts within greywacke beds, and polished graphitic bedding planes between occasional siltstone beds.

 

The metallurgical test programs characterized each zone by combining intervals of mineralized core from different vein and structural intercepts at depth to create numerous Variability Composites as listed in Table 13.1. This was achieved by defining sections along the length of each zone (Figures 13.2 to 13.7) and creating a database of all intervals greater than 2 meters in width with a gold grade above 0.5 ppm. This database enabled each Variability Composite to target and test the metallurgical properties of variable gold grades along individually modelled veins across the zone.

 

After assembly, the Variability Composites were sealed in plastic buckets and shipped to Base Metallurgical Laboratories Ltd., in Kamloops, BC, Canada.

1 November 2024

  295 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 13.1 Plan view map of metallurgical sections from Keats, Golden Joint, Lotto, Iceberg and Iceberg East.

 

 

1 November 2024

  296 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 13.1 Mineralized Zone and Number of Variability Composites.

 

Mineralized Zone Variability Composites
Phase 1  
Golden Joint 14
Keats 1, 2 & 3 29
Keats 4 16
Keats 5 34
Lotto 23
Subtotal 116
Phase 2  
Iceberg 46
Total 162

 

Figure 13.2 Keats Main - 1 section with drillholes selected for metallurgical testing. The black bars shown in the figure represent the metallurgical testing intervals.

 

 

1 November 2024

  297 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 13.3 Cross section of Keats Main - 2 illustrating drillholes selected for metallurgical testing. The black bars shown in the figure represent the metallurgical testing intervals.

 

 

Figure 13.4 Cross section of Keats Main - 4 illustrating drillholes selected for metallurgical testing. The black bars shown in the figure represent the metallurgical testing intervals.

 

1 November 2024

  298 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 13.5 Cross section of Lotto illustrating drillholes selected for metallurgical testing. Selected drillholes from both Lotto sections 1 and 2 are represented in this cross section. The black bars shown in the figure represent the metallurgical testing intervals.

 

 

Figure 13.6 Golden Joint section illustrating drillholes selected for metallurgical testing. Selected drillholes from both Golden Joint sections 1 and 2 are represented in this cross section. The black bars shown in the figure represent the metallurgical testing intervals.

 

1 November 2024

  299 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 13.7 Cross section of Iceberg #3 illustrating drillholes selected for metallurgical testing. Black bars shown in the figure represent the metallurgical testing intervals.

 

 

 

 

13.2.1 Sample Preparation

 

Variability Composites were initially coarse crushed to a nominal 1 inch, blended and 12.5% of the mass was split and directed to a respective Master Composite as shown in Table 13.2. Four Master Composites (Keats 1, Keats 2, Lotto, and Iceberg) were assembled using 148 Variability Composites generated from approximately 1,350 m of drill core with a combined weight of 4,800 kg. A Master Composite was not prepared from the Golden Joint Variability Composites due to the lack of sufficient mass for testing.

 

 

Table 13.2 Master and Variability Composite Summary.

 

Master Composite Mineralized Zone No. of Variability Composites
KZ-MC-1 Keats 1,2,3 29
KZ-MC-2 Keats 4, 5 50
LZ-MC Lotto 1-2 23
IB-MC Iceberg 1-10 46

 

 

The Variability Composites were stage crushed to minus 10 mesh, blended, and split into 1 kg charges for metallurgical testing and geochemical head analysis.

 

1 November 2024

  300 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

13.3 Metallurgical Testing

 

13.3.1 Sample Characterization

 

A gold deportment study was completed by AMTEL (AMTEL, 2024, AMTEL, 2023) on the four Master Composites from Phase 1 and Phase 2, which reported the following summarized findings:

 

Free gold grains contributed 96%, 94%, 91% and over 80% of the gold for KZ-MC-1, KZ-MC-2, LZ-MC, and IB-MC, respectively.
Readily gravity recoverable gold (GRG) carried by free gold grains, >75 µm in size, account for 61%, 59%, 74% and 46% of the grades for KZ-MC-1, KZ-MC-2, LZ-MC and IB-MC, respectively. The IB-MC had a smaller quantity of gravity recoverable gold (>75 µm) than the Keats and Lotto material. There was an absence of gold grains >300 µm in the Iceberg material.
KZ-MC-1, KZ-MC-2 and LZ-MC contain 2% to 3% of gold particles that are unliberated but exposed, which would be leachable by cyanide.
IB-MC differed in that approximately 14% of the gold particles are unliberated but exposed, which would be leachable by cyanide.
Submicroscopic gold is a secondary contributor to grade. It is held in solid solution form, in both arsenopyrite and pyrite. It is refractory to cyanide leach.
Despite high gold recoveries by direct cyanide leach, the Master Composites generated significant gold tailings grades ranging from 0.40 ppm to 0.80 ppm. This gold is predominantly refractory, held in solid solution and preg-robbed forms, and therefore a finer primary grind would not be beneficial.
o Due to an enrichment of solid solution of gold in arsenopyrite, small changes in the abundance of this mineral may impact residue grade
o Likewise, because the carbon matter in the mineral is “active” and can be a significant preg-robber, then small changes in total organic carbon (TOC) content may have notable impacts on residue grades.
An “up-front” centrifugal gravity circuit would be essential for processing the analyzed samples.
The coarsest gold grains are considered too large to float efficiently.
The coarsest gold grains are considered too large to leach within the residence time of a conventional CIL circuit.

Figure 13.8 illustrates and summarizes the differences that AMTEL identified between the gold deportment and gold grain size for the different mineralized zones.

 

 

 

1 November 2024

  301 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 13.8 - Gold Deportment and Gold Grain Size for the Keats, Lotto and Iceberg Zones (AMTEL,2024)

 

 

 

 

All Variability Composites and Master Composites were subjected to ICP 32 element analysis, QEMSCAN mineral analysis, and carbon and sulfur speciation (BL, 2024a and BL, 2024b, ALS, 2023, ALS, 2024).

 

ICP analysis showed that the average amount of arsenic was 3700 ppm with a range from 54 ppm to 15,600 ppm, while the average sulfur concentration was 1.09%, with a range from 0.24% to 2.68%.

 

QEMSCAN analysis reported average arsenopyrite values of 0.94% with a range from 0% to 4.93%, which was interpreted as a mineral matrix that could encapsulate gold and inhibit gold extraction.

1 November 2024

  302 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Carbon speciation analysis showed that the average total carbon value was 0.65%, with a range from 0.08% to 1.77%. The average organic carbon concentration was 0.07%, with a range from 0.009% to 0.171%.

 

Silver assays for the combined Keats, Golden Joint and Lotto Variability Composites showed an average silver value of 0.45 ppm with a range from 0.25 ppm to 5.34 ppm. Average silver concentration in the Iceberg Variability Composites was <0.5 ppm. Due to the low overall average silver value, the optimization of silver extraction was not incorporated into the test program.

 

13.3.2 Master Composite Testing

 

Master Composites were subjected to the following tests:

Comminution characterization
Gravity Recoverable Gold (GRG) in Phase 1
Extended Gravity Gold Determination (EGRG) in Phase 2
Carbon-in-Leach (CIL) cyanide leaching of the gravity tailings
Intensive Cyanide Leach (ICL) of gravity concentrates in Phase 1
Direct cyanide leach of the gravity tailings
Thickening and filtration testing
Cyanide detoxification

 

13.3.2.1 Comminution Testing

 

Comminution tests were completed on each of the three Master Composites from Phase 1 and the Iceberg Master Composite from Phase 2. The tests included the SMC breakage test to determine A x b values, Bond ball mill work index (BWi) and Bond abrasion index (Ai). The results of the tests are shown in Table 13.3.

 

 

Table 13.3 Master Composite Comminution Test Summary

 

Master Composite SMC A x b BWi Bond Ai
    (kWh/t) (g)
KZ-MC-1 59.4 17.9 0.286
KZ-MC-2 60.4 16.2 0.089
LZ-MC 65.9 18.3 0.124
IB-MC 64.7 18.1 0.201

 

 

The results of the comminution test work indicate that the mineralized material would be amenable to a conventional SAG/Ball milling circuit and would have moderate grinding requirements in a secondary ball mill. The material is only mildly abrasive and should not result in high steel consumption in the crushing and milling circuits.

1 November 2024

  303 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

13.3.2.2 Gravity Recoverable Gold (GRG)

 

In Phase 1, KZ-MC-2 and LZ-MC Master Composites were tested for gravity recoverable gold.

 

Black Swan Metallurgy (BSM, 2023) evaluated the gold deportment analysis conducted by AMTEL and compared it against the gravity gold recoveries that were realized from the tests conducted at Base Metallurgical Laboratory.

 

BSM concluded, “The analysis described in this report has resulted in estimations of gold recoveries from a conventional gravity circuit of 45-55%, processing effectively 100% of the fresh mill feed tonnage rate by centrifugal concentration of the mill discharge and intensive cyanidation of gravity concentrates.”

 

The Phase 2 Iceberg Master Composite was tested for gravity recoverable gold using the Extended Gravity Gold Determination (E-GRG). The results of the E-GRG test measured 85.3% recoverable gravity gold that had a combined gravity concentrate gold grade of 1,983 g/t. The E-GRG values do not directly predict or correlate gold recovery results from a closed-circuit milling operation but do indicate that there is a significant gravity gold component in the material.

 

13.3.2.3 Gravity Tail Leach Evaluation

 

The four Master Composites were separately treated in a gravity circuit and the gravity tails were leached with both the CIL process and by direct leach; the results of which are shown in Table 13.4.

 

Table 13.4 Master Composite CIL and Direct Leach Extractions (approximately 75 µm grind)

 

Master Composite Calculated Head Grade Gravity Extraction Gravity Tail Leach Extraction Total Au Extraction
  (ppm Au) (%) (%) (%)
KZ-MC-1 (CIL) 39.4 86.6 85.2 98.0
KZ-MC-1 (Direct Leach) 38.86 86.5 53.3 93.7
KZ-MC-2 (CIL) 3.97 55.8 76.7 89.7
KZ-MC-2 (Direct Leach) 3.92 56.2 16.0 63.2
LZ-MC (CIL) 12.5 80.3 74.2 94.9
LZ-MC (Direct Leach) 12.25 81.0 14.9 83.8
IB-MC (CIL) 11.4 33.8 87.3 91.6
IB-MC (Direct Leach) 11.7 32.9 73.5 82.2

 

1 November 2024

  304 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 13.4 shows that the overall gravity/CIL extractions ranged from 89.7% to 98.0% and that gravity/direct leach extractions ranged from 63.2% to 93.7%. The lack of activated carbon in the Direct Leach to offset the impact of the organic preg-rob carbon is interpreted to be the reason for the lower extraction.

 

Grinding the Master Composite samples to 37 µm increased gold extraction by less than 1%, which does not appear to be economically advantageous. Therefore, a grind size of 75 µm was selected for testing the Variability Composites.

 

A retention time of 24 hours was also selected for testing the Variability Composites in CIL as gold extractions for the Master Composites were only marginally improved with longer leach times.

 

13.3.2.4 Gravity Concentrate Intensive Cyanide Leaching

 

An intensive cyanide leach on the Master Composite gravity concentrates produced gold extractions which were 96% for both KZ-MC-1 and KZ-MC-2 and 99% for the Lotto Master Composite. Some arsenopyrite captured in the KZ-MC-1 and KZ-MC-2 gravity concentrates is interpreted to be the reason for the lower intensive cyanide leach gold extraction for these samples.

 

13.3.2.5 Cyanide Detoxification Testing

 

The SO2/Air process with sodium metabisulfite as a source of SO2 was used for cyanide detoxification for the Master Composites. The treated tailings solutions contained less than 1 ppm CNWAD. Table 13.5 summarizes the cyanide detoxification testing.

 

 

Table 13.5 Summary of Cyanide Detoxification Testing

 

Master Composite Retention Time pH CN Total CN WAD SO2 Equiv.
  (min)   (mg/L) (mg/L) (g/g CN WAD)
KZ-MC-1 (CIL) 90 8.0 14.7 0.9 10.0
KZ-MC-2 (CIL) 60 8.0 0.6 0.4 10.0
LZ-MC (CIL) 90 8.1 0.6 0.5 7.5
IB-MC (CIL) 60 8.6 0.5 0.3 5.0

 

 

13.3.3 Variability Composite Testing

 

All 162 Variability Composite samples were subjected to gravity gold extraction at a target grind of 212 µm, gravity tails were reground to target grinds of 75 µm and 37 µm, then treated by CIL for 24 hours. Table 13.6 shows a summary of the 75 µm results of the tests.

1 November 2024

  305 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Table 13.6 Summary of Variability Composite Gravity/CIL Extractions.

 

  Variability Composites Minimum Head Grade Maximum Head Grade Average Head Grade Weighted Au Extraction
    (ppm Au) (ppm Au) (ppm Au) (%)
Golden Joint 14 0.87 18.86 5.13 90.0
Keats 1, 2 & 3 29 0.77 100.38 15.15 96.3
Keats 4 16 0.63 33.14 5.85 92.2
Keats 5 34 0.35 170.99 17.31 96.8
Lotto 23 0.48 65.35 9.38 95.0
Iceberg 46 0.49 118.7 19.84 96.9

 

 

 

13.3.3.1 Arsenic Content vs Gold Tails Grade

 

A review of the results of the leach tests for the Variability Composites indicated that there is a relationship between arsenic content and CIL gold tails grade. This finding is consistent with the results of the gold deportment studies completed by AMTEL, which were previously discussed in Section 13.3.1 of this report.

 

An analysis of the data was completed, comparing the relationship between arsenic content and gold tails grade for different ranges of gold head grade. The analysis compartmentalized the gold head grade in range increments from <1.0 ppm, 1.0-2.0 ppm, 2.0-4.0 ppm, 4.0-7.0 ppm and >7 ppm.

 

Figure 13.9 illustrates the positive correlation between arsenic content and gold tails grade in Variability Composites with a gold head grade ranging from 2 ppm to 4 ppm.

 

Table 13.7 summarizes the correlation calculations between arsenic content and gold tails grade for the grouped gold grade ranges.

 

These calculations provide the initial framework for developing full scale commercial plant gold extraction models. Commercial scale gold extraction models for Queensway will need to incorporate additional scale-up inefficiency factors for:

 

Operational inefficiencies (start-ups, shut-downs, mechanical issue, operator error and etc.)
CIL gold solution losses to tailings
Intensive Cyanide Leach (ICL) gold losses to solids

1 November 2024

  306 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 13.9 Arsenic Content vs Gold Tails Grade for Gold Head Grades ranging from 2.0 ppm to 4 ppm.

 

 

 

 

Table 13.7 Arsenic Versus Gold Tails Grade Relationship

 

Gold Head Grade As vs Au Tails Grade Relationship
<1.0 ppm Au Tails Grade = -0.0000804*(Arsenic ppm) + 0.1307663
>1.0 ppm, <2.0 ppm Au Tails Grade = -0.0000440*(Arsenic ppm) + 0.3072254
>2.0 ppm, <4.0 ppm Au Tails Grade = -0.0000842*(Arsenic ppm) + 0.1868148
>4.0 ppm, <7.0 ppm Au Tails Grade = -0.0000561*(Arsenic ppm) + 0.3782457
>7.0 ppm Au Tails Grade = -0.0000097*(Arsenic ppm) + 0.6894860

 

 

13.3.4 Alternative Process Selection

 

A study was performed to test the proposed flotation scheme on selected low-grade, low gold extraction Variability Composites for Keats and Lotto that had gold extractions of less than 80%.

 

The following are brief descriptions of the flowsheets tested.

 

Flowsheet A - Gravity/CIL

1 November 2024

  307 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Flowsheet B - Gravity/Carbon flotation followed by CIL of flotation tailings
Flowsheet C - Gravity/Carbon flotation followed by sulfide flotation, regrind and CIL of flotation concentrate

 

The use of carbon flotation was investigated to remove organic carbon and reduce the preg-robbing characteristics of the samples. The carbon flotation tails were then cyanide leached. It is assumed that any gold recovered in the 1st carbon cleaner flotation concentrate is a throw-away product, unless future studies show this can be sold to a commercial smelter.

 

Sulfide flotation was investigated to increase extraction of gold locked in the arsenopyrite matrix. The sulfide flotation concentrate was milled to a finer size and then subjected to cyanide leaching for gold extraction.

 

The results of the study are summarized in Table 13.8.

 

Table 13.8 Carbon and/or Sulfide Flotation/CIL Tailings Study Results

 

Sample Flowsheet Option Test Calculated Head Grade (g/t) Overall Gold Extraction (%) Sodium Cyanide Usage (kg/t) Lime Usage (kg/t)
KZ4 #8 A CIL42C 1.70 72.7 1.33 1.17
  B CIL139D 1.95 70.0 0.58 1.23
  C CIL139E 2.07 72.4 3.87 3.20
             
KZ5 #35 A CIL69C 1.70 63.9 1.09 1.24
  B CIL140D 1.59 64.2 0.63 1.25
  C CIL140E 1.36 63.7 3.33 3.20
LZ #15 A CIL99C 1.24 56.5 1.32 1.50
  B CIL141D 1.25 48.5 0.63 1.34
  C CIL141E 1.19 48.5 3.73 3.33

 

 

Table 13.8 shows that both the carbon (flowsheet B) and carbon/sulfide flotation (flowsheet C) processing schemes returned similar results to the standard CIL flowsheet A for the Variability Composites tested. Overall gold extractions are within the margin of error for these tests.

 

Removing carbon and sulfide through flotation and regrinding of the concentrate did not improve gold extraction due to refractory gold in arsenopyrite and pyrite.

 

Table 13.8 also shows that cyanide consumption was reduced by approximately 50% in flowsheet B, due to the pre-aeration step that was added prior to CIL leaching of the flotation tails.

1 November 2024

  308 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

No discernable change in lime consumption was observed due to pre-aeration.

 

13.3.5 Process Selection

 

The process selected for the Queensway Project would be a standard gravity/carbon-in-leach (CIL) circuit. The process would consist of crushing, grinding, gravity extraction of coarse gold, thickening, CIL, carbon stripping, gold electrowinning, gold smelting, cyanide destruction and tailings disposal.

 

Figure 13.10 is an illustration of the different unit operations that might be selected as process equipment for treating the mineralized material from the portion of the Queensway Project that is east of the Appleton Fault.

 

13.3.6 Reagent Consumptions (Carbon-In-Leach)

 

The Phase 1 metallurgical test work for the Variability Composites showed reagent consumptions for cyanide and lime of 1.30 kg/t and 1.52 kg/t, respectively. Test work using pre-aeration indicated that cyanide consumption could be reduced by approximately 50%. Hence, estimated reagent consumptions would be estimated at 0.65 kg/t for cyanide for Phase 1.

 

The Phase 2 test work for the Iceberg Variability Composites incorporated a pre-aeration step prior to CIL. Reagent consumptions for the Variability Composites for sodium cyanide and lime averaged 0.32 kg/t and 2.71 kg/t, respectively.

 

13.3.7 Risk Analysis

 

The metallurgical test work that has been completed to date has identified samples from numerous vein structures across different sections of the mineralized zone from surface to depth. The sample analysis has included lithology, vein structure, mineralogy, QEMSCAN mineral abundance, ICP elemental assay, gravity gold extraction, comminution characteristics, preg-rob characteristics, carbon and sulfur speciation, cyanide gold extraction, and flocculation and filtration characteristics. Alternative process schemes have been tested including carbon flotation and sulfide flotation, followed by concentrate regrind and intensive cyanide leaching of the concentrate for final gold extraction.

 

Due to the number of samples and the comprehensive nature of the analysis, future test opportunities are limited and the risk to predicted gold extraction minimized.

 

Table 13.9 identifies the risks associated with gold extraction and mineral processing for the Phase 1 and Phase 2 testing.

 

The risk analysis for metallurgical testing did not identify any areas of high risk.

 

 

1 November 2024

  309 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 13.10 Queensway Project Process Flow Sheet.

 

 

1 November 2024

  310 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

Table 13.9 Risks associated with gold extraction and mineral processing.

 

Risk Description Likelihood Consequence Rating Risk
The full effect of preg-rob materials in the mineralized zones may be higher than tested Unlikely Moderate Low
Refractory gold found in arsenopyrite/pyrite may be higher than tested Unlikely Moderate Low
Reagent consumptions have not been optimized Likely Low Low
Gravity gold recovery is overestimated Likely Low Low

 

 

 

13.3.8 Future Metallurgical Testing

 

Reagent consumptions were reduced by approximately 50% when a pre-aeration step was added prior to CIL in a flotation testing program in Phase 1.

 

Gold extraction and reagent consumption were investigated adding a pre-aeration step for the Phase 2 testing of the Iceberg samples. The results showed that the cyanide consumption averaged 0.32 kg/t. The pre-aeration step will be continued in any future testing.

 

The results of the E-GRG test for the Iceberg Zones measured 85.3% recoverable gravity gold that had a combined gravity concentrate gold grade of 1,983 g/t. An interpretation of these results is pending.

1 November 2024

  311 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

14 Mineral Resource Estimates

 

The Issuer, New Found Gold Corp, has yet to conduct mineral resource estimation work at the Company’s Queensway Gold Project.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*** NI 43-101 Items 15 to 22 not included ***

 

1 November 2024

  312 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

23 Adjacent Properties

 

The QP has been unable to verify the information in this section related to other company’s projects surrounding the Queensway Property, and therefore, the information is not necessarily indicative of the geology or mineralization on the Property that is the subject of this technical report. Adjacent property mineral tenure is based on current information maintained by the Minerals Land Division.

 

Since 2019, mineral exploration interests in central Newfoundland have resulted in a staking rush with over 100,000 claims acquired in 2021. Many of the adjacent properties in the Queensway Property area are hosted within the Exploits Subzone of the central Newfoundland gold belt. Most of the exploration attention is focused on the southwest to northeast trending Dog-Bay-Appleton-GRUB line fault systems that extends from south-central Newfoundland to the north coast.

 

The Beaver Brook Antimony Mine, which began mining operations in 1998, lies on the western boundary of Queensway South, across the Northwest Gander River. It suspended operations in 2020 (due to the COVID-19 pandemic) and restarted in 2021. In January 2023, the mine entered a period of care and maintenance, and it is not known whether production will resume in the future (CBC News, 2023).

 

There are hundreds of licence blocks in the immediate area of the Queensway Property, thus, only those adjacent properties of significant size and proximity to the Property will be discussed in this section (Figure 23.1).

 

Exploits Discovery Corp. (Exploits) are owners of 34 mineral licence blocks immediately adjacent or close to NFG’s Queensway Property towards the North (Figure 23.1). These include Exploits’ Bullseye, Gazeebow, Great Bend, Mt. Peyton, and Mt. Peyton North projects (Exploits Discovery Corp., 2024). Exploits has recently completed diamond drilling at their Bullseye project (license 035151M), which borders the Queensway Property immediately north of the NFG Showings Everest and Lotto North. In an August 14, 2023, News Release, Exploits announced assay results from 29 diamond drillholes completed at Bullseye in 2023, including: “Select intercepts from BE-23-28 include 4.08 g/t Au over 1.60 m core-length, including 8.16 g/t Au contribution from a 0.7 m core sample” (Exploits Discovery Corp., 2023). Additional exploration work completed by Exploits on their claims surrounding NFG’s Queensway Property include rock grab sampling, till sampling, remote sensing surveys, and geophysical surveys (Exploits Discovery Corp., 2024).

 

Rocky Shore Metals Ltd. (acquired by Hemlo Explorers Inc.) holds 31 mineral licence blocks towards the south and southeast of the Queensway property, some of them at the immediate vicinity. Rocky Shore’s flagship Gold Anchor Project is a district scale asset in a significantly underexplored area that totals over 2,100 claims and 533 square kilometres between the Dog Bay Line and Grub Line faults - on the same trend as the gold occurrences in the Queensway property (Hemlo Explorers Inc., 2024).

1 November 2024

  313 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Figure 23.1 Adjacent properties to the Queensway Gold Property (Source: Government of Newfoundland and Labrador Geoscience Atlas https://geoatlas.gov.nl.ca). See legend on next page.

 

 

1 November 2024

  314 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Figure 23.1, continued. Adjacent property company’s legend.

 

 

 

 

Marvel Discovery Corp. (Marvel) completed exploration work on their Gander East project, which is located along the southeast border of QWS (Marvel Discovery Corp., 2023). The exploration work includes a till sampling program in 2023 and a helicopter-borne magnetic geophysical survey in 2022 (Marvel Discovery Corp., 2023).

 

Gossan Resources Ltd. (Gossan) completed ground exploration on their land package referred to as the Gander Gold project, which borders the eastern edge of QWN (Gossan Resources Ltd., 2024). The exploration work involved a till sampling survey completed in 2022, which identified several gold-in-till anomalies across the property (Newsfile Corp., 2023).

Falcon Gold Corp. (Falcon) holds a total of 316 claims in their Gander South Property towards south of the Queensway property. The property overlies extensions of the major Dog Bay - Appleton - Grub Line fault system (https://falcongold.ca/gander-north-nl/).

To the southeast of QWS, Galloper Gold Corp. (a privately-owned exploration company registered in British Columbia), own a significant land package of mineral licences east-southeast of QWS, which include their Mint Pond project (Galloper Gold Corp., 2024). Reconnaissance soil sampling programs were completed on their claims in 2022 and 2023 (Galloper Gold Corp., 2024).

 

Amber Rice holds 7 mineral licences towards the immediate south of the property with 831 claims in total.

1 November 2024

  315 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Finally, there are 11 mineral licence blocks not owned by NFG that are enclosed within the general boundary of the Queensway Property, 10 of which are located within the NFGs QWS block and a single licence in the QWN block. More specifically, the enclosed mineral licences include,

In the southeast corner of QWS, Clyde McLean owns a single mineral licence (025520M) comprising 6 mineral claims.
In the central area of QWS,
o Golden Ridge Resources Ltd. owns 2 licences (024195M and 025767M) with 62 claims.
o Canterra Minerals Corp. (licence 031341M) a single mineral licence with 4 claims.
In the northern end of QWS,
o Darrin Hicks holds 3 mineral licences (030729M, 030713M and 020493M) with 9 claims in total.
o Metals Creek Resources holds 1 mineral licence (024096M) with 6 claims,
o Stephen Stockley Agriculture and Fabrication Inc. holds a single mineral licence (036671M) with 6 claims.
o Exploits Discovery Corp. holds a single mineral licence (030708M) with 20 claims.
In QWN Block, towards the western part of the property, Exploits Discovery Corp. holds a single mineral licence (035151M) with 11 claims.

 

 

1 November 2024

  316 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

24 Other Relevant Data and Information

 

On August 14, 2023, NFG announced the Company entered a non-binding memorandum of understanding (MOU) with Maritime Resources Corp. (Maritime) in which the Company has been granted the right to conduct due diligence and exclusivity to negotiate with Maritime regarding a toll milling agreement at the existing Pine Cove Mill (New Found Gold Corp. 2023q).

 

Pursuant to a brokered private placement, the Company purchased non-convertible senior secured notes (Notes) and common share purchase warrants of Maritime (Note Warrants) for an aggregate purchase price of USD$2,000,000. The Note Warrants entitle NFG to purchase common shares in the capital of Maritime equal to 40% of the aggregate principal amount of the Notes and are exercisable until the maturity date of the Notes (New Found Gold Corp. 2023q).

 

The Pine Cove Mill is located on the Baie Verte peninsula, NL, approximately 270 km from the Queensway project by paved highway. The Pine Cove Mill is a fully permitted gold processing facility that is rated at 1,400 tonnes per day with a large capacity tailings storage facility and access to port infrastructure.

 

1 November 2024

  317 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

25 Interpretation and Conclusions

 

25.1 Exploration Results and Interpretations

 

Between 2016 and 2024, NFG has completed a significant amount of exploration work at its Queensway Gold Project that includes:

 

Interpretation and integration of magnetic, electromagnetic, gravity, 3D seismic, LiDAR, photogrammetry surveys, and surface exploration datasets to generate multiple targets along the Appleton and JBP fault zones.

 

Surface geochemical sample collection consists of 1,250 till samples, 27,518 soil samples, 9,019 rock samples, and 3,532 trench channel samples.

 

A total of 2,388 diamond drillholes totaling 583,000 m of diamond drill core. The level of drilling at individual gold prospects varies from 1 to 2 holes at the 798, Aztec, Hank 1, Hank 2, and Bigger Vein prospects through to 361 drillholes (94,200 m) at the Keats prospect.

 

A total of 501,898 core samples analyzed from 2,354 drillholes assayed at independent laboratories.

 

With respect to regional gold trends, NFGs exploration work has resulted in the:

 

Identification of numerous gold prospects and gold zones along a strike length of approximately 100 km associated with regional-scaled Appleton and JBP fault zones. NFG has drill-defined 1) 55 gold prospects within the QWN block, including 10 prospects in the VOA Option area, 2) 14 gold prospects in the QWS block, and 3) 1 prospect in the TP block.

 

Definition of the Appleton Fault Zone Mineralized Envelope - A semi-defined contiguous network of gold veins and related faults that is drill-defined to occur along a 4.5 km segment of the AFZ in the QWN block. Gold prospects within the envelope include the Keats, Keats North, Cokes, Iceberg, Iceberg East, Iceberg Alley, Keats West, Road, Golden Joint, Dome, Lotto, Monte Carlo, Lotto North, Jackpot, Honeypot, K2, Everest, Knob, Grouse, and TCH prospects. The high-grade gold trend is supported by the 1) style of mineralization, or high gold grades in quartz-carbonate veins at various prospects along the trend, 2) structural associations defined by complex networks of brittle fault zones aligned with regional deformation zones, 3) recognition and correlation of unique veins and vein systems, 4) association between gold and accompanying gangue (arsenopyrite, lead-antimony sulfosalt) and alteration minerals (aluminum-rich NH4 white muscovite), and 5) consistently hosted in Davidsville Group sediments that form the hanging wall and footwall to the Appleton Fault Zone.

1 November 2024

  318 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Capacity to define a possible 3.7 km segment of gold occurrences within the JBPFZ between the south end of the Pocket Pond prospect and the north end of the 1744 prospect in the QWN block. This trend of high-grade mineralization is less well defined in comparison to the Appleton Fault Zone Mineralized Envelope. Currently, the trend is supported by till and soil geochemical anomalies between the two drill-tested prospects, and by a uniquely different style of mineralization in that the gold mineralization associated with the JBPFZ typically follows the orientation of the stratigraphy.

 

Drill-delineation of several new gold prospects in QWS block that include, for example, the Astronaut, Devils Pond South, Camp, Eastern Pond, Nova, and Nebula prospects. These prospects either 1) correlate with QWN mineralization along the AFZ and suggest the potential for continued mineralization along the AFZ throughout the Queensway Property, or 2) occur in association with a dioritic-gabbroic dyke swarm that has yet to be identified at the QWN block.

 

NFG’s most significant gold prospects along the AFZ in the QWN block include:

 

Keats Main: The Keats prospect is located at the north end of the AFZ in QWN, along the KBFZ, which has an east-northeast strike (N55°E) and dips to the southeast at approximately 60°. The brittle KBFZ fault zone extends east of the AFZ and runs slightly oblique to it, forms an extensive damage zone, and is characterized by a complex network of brittle, high-grade, epizonal, gold vein arrays. The Keats-Keats South segment of the KBFZ has been traced over a strike length of 1.1 km and down to a vertical depth of over 400 m.

 

Keats West: Keats West is defined by a low angle thrust fault that dips gently to the south-southwest and is located on the west side of the AFZ. The fault zone is hosted by an interbedded sequence of black siltstone, siltstone, and greywacke, and contains a series of stacked veins that contain both low and high-grade gold mineralization over a considerable thickness with cumulative widths ranging from 10-30 m.

 

K2: The K2 prospect is 725 m north of Lotto on the west of the AFZ. The prospect is defined by a significant structural zone made up of multiple structures and crosscutting vein orientations, that currently has a defined mineralized footprint that is 490 m long and 395 m wide. Much of the gold at K2 is found in the “K2 Main” structure, a low-angle gold-bearing fault zone starting at surface that dips 30-40° to the southeast and shares a similar dip to Keats West and strike to the KBFZ.

 

Lotto: The Lotto Main vein occurs approximately 200 m east of the AFZ and ranges in true width from less than 1 m to approximately 3.5 m. Other notable veins in the Lotto prospect include the Sunday and Tuesday veins, which occur between the Lotto Main Vein and the AFZ in a region known as the Lotto Footwall. The contained high-grade segment of the Lotto Main vein has been defined over a strike length of approximately 200 m and to a depth of 220 m, but the vein itself has been intersected up to 350 m vertical depth.

1 November 2024

  319 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Golden Joint: The Golden Joint prospect is located 1 km north of the Keats prospect on the east side of the AFZ. The Golden Joint Zone consists of a massive quartz vein with stylolitic and brecciated textures that occurs in the footwall shale adjacent to the AFZ. The vein strikes approximately north, dips steeply to the west at 82°, and has been drill-defined over a strike length of 250 m and to a depth of 385 m.

 

The Golden Joint hanging wall is hosted by a thick bed of greywacke. Mineralization tends to be characterized by stockwork veining that generally trends in an east-northeast orientation, dips moderately to the southeast, and is drill-defined over a strike length of 185 m and to a depth of at least 150 m.

 

Iceberg and Iceberg East: The Iceberg and Iceberg East showings are located on the east side of the AFZ, extending several hundred metres northeast from the Keats Zone. Like Keats, the gold mineralization occurs within the KBFZ, has a true width of 10 to 40 m, and has good continuity of the high-grade along strike and to depth. The near-surface Iceberg-Iceberg East high-grade segment of the Keat’s Baseline Fault Zone has a strike length of 655 m and little exploration has been completed below 200 m vertical.

 

Monte Carlo: The Monte Carlo prospect is located adjacent to the Lotto prospect on the west side of the AFZ. Gold mineralization occurs within an east-west striking, steeply dipping, vein that occurs within a fault zone that has been intercepted over a strike length of 520 m and down to a vertical depth of 160 m.

 

While significant untested gaps still exist, it is possible that a 6 km long mineralized strike area exists within NFGs QWN block with a potential fault damage zone width extent of 400 m, or 200 m on each side of the Appleton Fault Zone (and in certain places extends a full 500 m from the fault). Further exploration work is required to validate the true extent of the mineralized strike area.

 

NFG has also drill-tested a second major structural target within the QWN block known as the JBPFZ. This fault zone occurs east of, and parallels, the AFZ. Surface exploration has established 10 prospects, 5 of which have been drilled by NFG. A possible 3.7 km segment of high-grade gold occurrences within the Joe Batt’s Pond Fault Zone between the south end of the Pocket Pond prospect and the north end of the 1744 prospect. Gold mineralization in this trend is hosted in ductile, brittle deformation zones and associated irregular vein arrays that run parallel to the southwest-striking, steeply west-dipping stratigraphy.

 

The QWS block was initially drill-tested in 2022. The positive results of this program compelled NFG to conduct additional 2023 and 2024 exploration work that included rock sampling, soil sampling, and drilling. To date, a total of 89 drillholes totalling 19,059 m have identified 14 gold prospects at QWS that occur along, or are offset to, the AFZ. Queensway South prospects include:

1 November 2024

  320 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Mineralized shear zones at the Nebula, Devil’s Trench, Devils Pond South, and Camp prospects that have gold associated with quartz veining and accessory sulphide minerals in greywacke and siltstone. The geology and mineralization are locally analogous to the gold discoveries made along the northern portion of the Appleton Fault Zone in QWN block.

 

Astronaut, Nova, and Goose prospects occur within parallel structures located west of the AFZ and have gold hosted in siltstone that is intruded by a swarm of dioritic-gabbroic dykes that has not been recognized at the QWN block.

 

Epithermal fault zone gold mineralization, defined by sinter and hydrothermal breccia, has been discovered at the Aztec prospect.

 

Lastly, and in 2022, NFG drilled 7 drillholes (1,508 m) at the Twin Ponds prospect in the TP block. Of the 1,863 core samples assays from Twin Ponds, 1,862 were below 1 ppm Au with an average of 0.02 ppm Au, and one analytical result of 1.33 ppm Au. Anomalous gold values were interpreted to be associated with the Clydesdale Fault, a contact fault between the Duder Group in the west and the Ten Miles Lake Formation in the east.

 

25.2 Qualified Person Opinion on NFG’s Exploration Programs

 

It is the QP’s opinion that the exploration work conducted by NFG at the Queensway Property is reasonable and within the standard practices of gold evaluation within the Dunnage Zone of central Newfoundland. This contention is supported by the QPs 1) site inspection enabled understanding of the geological setting and mineralization, and independent validation of the gold mineralization at Queensway, 2) positive review of NFG sample preparation, security, and analytical protocols, 3) review of the QA-QC methodologies employed, and the positive results of the QA-QC analytical work, and 4) review of the analytical results in conjunction with the laboratory certificates.

 

In November 2021 NFG initiated a trial of the Chrysos PhotonAssayTM non-destructive method for gold analysis at MSALABS, in conjunction with follow-on screen metallic fire assay or standard 30-g fire assay method at ALS for assay comparison. The results from the trial program demonstrated that the methods agree well, and the Company, its consultants, and the Qualified Person concludes that the PhotonAssayTM method is appropriate for Queensway samples. From June 2022 to June 2024, NFG only submitted core samples for gold assay to ALS and MSALABS. Since June 2024, NFG only submits core samples for gold assay to ALS.

 

NFG exploration work results provide a significant update to the geology and mineral potential of northeast Newfoundland and the QP advocates that the information and data presented in this technical report forms a robust database for future exploration, and potentially, mineral resource estimation studies, at the Queensway Property.

1 November 2024

  321 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

25.3 Metallurgical Test Results

 

Starting in 2023, Phase 1 and Phase 2 of the metallurgical test work for the Queensway Project was completed by several different laboratories (New Found Gold Corp., 2024i). The Phase 1 work considered three mineralized zones, Keats, Golden Joint, and Lotto. The Phase 2 work considered mineralization from the Iceberg and Iceberg East zones. All sampling intervals were greater than 2 m in width with a gold grade above 0.5 ppm. The sampled material is representative of the gold zones as sampling was conducted across numerous vein structures along different sections of each mineralized zone from surface to depth.

 

Four Master Composites (Keats 1, Keats 2, Lotto, and Iceberg) were assembled using 148 Variability Composites generated from approximately 1,350 m of drill core with a combined weight of 4,800 kg. A Master Composite was not prepared from the Golden Joint Variability Composites due to the lack of sufficient mass for testing.

 

The sample analysis included lithology, vein structure, mineralogy, QEMSCAN mineral abundance, ICP elemental assay, gravity gold extraction, comminution characteristics, preg-rob characteristics, carbon and sulfur speciation, cyanide gold extraction, and flocculation and filtration characteristics. Alternative process schemes have been tested including carbon flotation and sulfide flotation, followed by concentrate regrind and intensive cyanide leaching of the concentrate for final gold extraction.

 

The tested mineralized zones contain significant free-milling gold that is amenable to both gravity and leach extraction. Free gold grains greater than 150 microns in size were observed predominantly in the quartz veins located throughout the tested zones. Positive gold extraction percentages were achieved using gravity separation and conventional carbon-in-leach technologies. The Variability Composite samples (n=162) were subjected to gravity gold extraction at a target grind of 212 µm, gravity tails were reground to target grinds of 75 µm and 37 µm, then treated by carbon-in-leach for 24 hours. The average gold weighted extraction percentage from the mineralized zones ranged between 90.0% and 96.9% when reduced to a product size of 75 µm. Lower gold extraction values were realized for individual Variability Composite samples that had gold head assay values of less than 2 grams per tonne.

 

Comminution test work indicated that the tested material had an SMC breakage test to determine A x b index values of between 59.4 and 65.9 (average 63%) and a Bond Work Index of between 16.2 and 18.3 kWh/t (average 18 kWh/t).

 

The test work demonstrates that conventional gravity separation and CIL are well-suited extraction methods for gold mineralization of the prospects tested to date at the Queensway Gold Project. The results of the comminution test work indicate that the mineralized material would be amenable to a conventional SAG/Ball milling circuit and would have moderate grinding requirements in a secondary ball mill.

1 November 2024

  322 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

Risk analysis associated with the metallurgical testing did not identify any areas of high risk. Additional flowsheet development work is ongoing to determine if marginal improvements in gold extraction can be achieved.

 

25.4 Risks and Uncertainties

 

Potential risks and uncertainties toward the advancement of NFG’s Queensway Project include:

 

NFG mineral rights ownership of licences 035047M and 035197M, 035048M and 035198M, and 035050M are subject to the successful completion of the conditions within a single VOA Option agreement; hence, there is some uncertainty to completion of the conditions and subsequent acquisition of gold prospects within the licences.

 

Although NFG’s exploration work is defining broad zones of mineralization, the gold mineralization can be erratic over short distances, which creates difficulties in building local vein network and gold mineralization models.

 

A risk assessment associated with the Phase 1 metallurgical testing identified low risk for the full effect of preg-rob materials in the mineralized zones, optimization of reagent consumptions, and overestimation of gravity gold extraction, and medium risk for comminution characteristics. These risks will be re-evaluated and investigated further as part of future metallurgical test work.

 

Ultimately, there is a risk that the scalability of initial laboratory-based mineral processing/metallurgical test work may not translate to a full-scale commercial operation.

 

NFG will attempt to reduce risk/uncertainty through effective project management, engaging technical experts and developing contingency plans. To the best of the QPs knowledge, there are no environmental liabilities, significant factors or risks that may affect access, title, or the right or ability of NFG to perform exploration work on the Queensway Property. With respect to obtaining additional permits, the QP has no reason to assume that the Company would not be granted additional exploration approvals and other permits to advance the Queensway Gold Project.

 

1 November 2024

  323 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

26 Recommendations

 

The Queensway Gold Project is a project of merit and requires additional exploration work to advance mineralized zones and individual prospects such as the

 

Appleton Fault Zone Mineralized Envelope, which includes the Keats, Keats North, Cokes, Iceberg, Iceberg East, Iceberg Alley, Keats West, Road, Golden Joint, Dome, Lotto, Monte Carlo, Lotto North, Jackpot, Honeypot, K2, and Everest prospects.

 

Recent drill-proven AFZ-related gold zone prospects in the QWS block including Eastern Pond, Camp, Devils Pond South, Aztec, Greenwood Pond, Goose, Astronaut/Nova, Nebula, and Devil’s Trench.

 

Continue with exploratory work along the Appleton and JBPFZ fault zones to define new prospects.

 

A two-phase work program is recommended with an estimated total cost of CDN$72.1 million with a 10% contingency. A summary of the program with cost estimates is presented in Table 26.1.

 

Phase 1 work recommendations are estimated to cost approximately CDN$36.7 million with a 10% contingency, and includes:

 

1. Ongoing geophysical surveys in the QWN and QWS blocks that include a Direct Current resistivity Induced Polarization (DCIP) survey. The surveying, data processing, interpretation, and modelling is estimated to cost CDN$200,000.

 

2. Regional and advanced surface exploration work is recommended at the QWS and QWS blocks that includes geological mapping, prospecting, trenching, and rock sampling along with till and soil geochemical surveys. The work programs are estimated to cost CDN$7,000,000.

 

3. A Phase 1 diamond drilling program consists of 1) step-out and infill drilling to further define and delineate the gold mineralization at known prospects in the QWN and QWS blocks, 2) target delineation drilling at the QWS and TP blocks to follow-up on promising 2023-2024 surface programs that yielded favourable geological interpretations, 3) exploratory drilling along the AFZ and JBPFZ to test targets identified through surface exploration work programs and specifically at the former LabGold Kingsway project (now the north portion of Queensway North block). A total of approximately 70,000 m of drilling is recommended. Assuming a drill cost of approximately CDN$312/m, an all-in cost of CDN$350/m has been estimated, which includes PhotonAssayTM analytical work, density measurements, and gold grain analytical studies. The Phase 1 drill program is estimated to cost CDN$25,000,000.

1 November 2024

  324 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

4. Ongoing metallurgical test work that includes 1) reduction of reagent consumptions during pre-oxidation or pre-aeration steps prior to CIL, 2) comminution characteristics, and 3) the estimate of gravity gold extraction. Gravity gold extraction and reagent consumption is currently being investigated for other mineralized zones associated with the Queensway Project and will likely provide additional insight which can be applied to Keats Main, Lotto and Golden Joint. Variability Composites have been identified to be tested for additional data in determining the SMC power requirements, Bond Ball Mill Work Index (BWi), and Bond Abrasion Index (Ai). The metallurgical test work is estimated to cost CDN$1,200,000.

 

Advancement to the Phase 2 work recommendations is contingent on the positive results of the Phase 1 work programs. If additional work is required to advance the Queensway Gold Project, the QP recommends a Phase 2 work program that is estimated to cost approximately CDN$35.4 million with a 10% contingency. The Phase 2 work program includes:

 

1. A Phase 2 drill program in which the Company continues to collect diamond drill core for baseline geological studies but initiates Reverse Circulation (RC) drilling to expedite higher test material production rates for metallurgical test work and to advance the project toward mine-planning. The objective of the drill program is to 1) complete infill and step-out drilling at QWN and QWS blocks, and 2) continue exploratory drill programs along the AFZ and JBP. Approximately 85,000 m of drilling is recommended. At an all-in cost of CDN$350/m, which includes analytical work, the cost of the drill programs is estimated at CDN$30,000,000.

 

2. Advancement of metallurgical test work with flowsheet optimization studies, methodology of producing saleable products, and handling of by-products and waste materials. This work is estimated to cost CDN$1,500,000.

 

3. Continue with environmental baseline studies and community engagement and initiate marketing and possible mine planning studies. Environmental studies started in 2021 and include topics such as aquatic life, water quality, groundwater and surface water, plants/animals, wildlife, archaeological and air quality monitoring. NFG should continue to communicate and build relationships with community, Indigenous, and other stakeholders to explore employment and business opportunities, community investment opportunities, and the protection of community’s environment. This work is estimated to cost CDN$350,000.

 

4. NFG has yet to disclose mineral resources at the Queensway Gold Project. Future technical reporting should include 3-D geological modelling, mineral resource estimation(s), and potentially, preliminary economic assessment that are prepared in accordance with CIM definition standards and guidelines (2014, 2019) and the disclosure rule, NI 43-101. Technical reporting is estimated to cost CDN$300,000.

1 November 2024

  325 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Table 26.1 Future work recommendations.

 

 

 

 

1 November 2024

  326 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

27 References

 

AMTEL (2023) - Advanced Mineral Technology Laboratory (AMTEL) Report - Gold Deportment in Three Master Composites of Queensway Ore. Prepared by AMTEL, 100 Collip Circle, Suite 205 London, Ontario, Canada N6G 4X8. Report-23,51, Nov 2023.

AMTEL (2024) - Advanced Mineral Technology Laboratory (AMTEL) Report - Gold Deportment in a Master Composite of Iceberg Ore, from Queensway Project. Prepared by AMTEL, 100 Collip Circle, Suite 205 London, Ontario, Canada N6G 4X8. Report-24/29, Preliminary

Arnott, R.J., McKerrow, W.S., Cocks, L.R.M. (1985): The tectonics and depositional history of the Ordovician and Silurian rocks of Notre Dame Bay, Newfoundland. Canadian Journal of Earth Science. 22, p. 607-618.

BL (2024a) - Base Met Labs Report - Metallurgical Testing of Samples from the Queensway Project, January 9, 2024. Prepared by Base Met Labs, 200-970 McMaster Way, Kamloops, B.C., V2C 6K2, Canada, Report 1 - BL1290.

BL (2024b) - Base Met Labs Report - Metallurgical Testing of Iceberg Samples from the Queensway Project, October 29, 2024. Prepared by Base Met Labs, 200-970 McMaster Way, Kamloops, B.C., V2C 6K2, Canada, Report 1 - BL1517.

BSM (2023) - Black Swan Metallurgy (BSM) Report - New Found Gold Corp, Queensway Project Gravity Circuit Recovery Modelling. Prepared by Black Swan Metallurgy, Perth, Western Australia, Australia. Nov 2023.

Blackwood, R.F. (1982): Geology of the Gander Lake (2D/15) and Gander River (2E/2) Area, Newfoundland Department of Mines and Energy − Mineral Development Division, Report 82−4.

Bloom, L. (2022): Queensway Sample Preparation, Analyses and Security; Internal Report to New Found Gold Corp.

CBC News (2023): Dozens laid off as antimony mine near Glenwood closes once again; CBC News article dated January 4th 2023, https://www.cbc.ca/news/canada/newfoundland-labrador/antimony-mine-closure-1.6703205

CGG Canada Services (2017): Geophysical Survey Report on the Airborne Magnetic and Helitem35C Survey - Gander Area, NL, Canada; Project 701005, for Palisade Resources.

CGG Canada Services (2020): Logistics and Processing Report on the HeliFALCON™ Airborne Gravity Gradiometer and Aeromagnetic Survey - Gander Area, NL, Canada; Project 900961, for New Found Gold Corp.

CGG Canada Services (2021): Geophysical Survey Report, Airborne Magnetic Helitem2 Survey, Gander, Project 2100084, New Found Gold Corp.

Colman-Sadd, S. P., Dunning, G. R., and Dec, T. (1992): Dunnage-Gander relationships and Ordovician orogeny in central Newfoundland; a sediment provenance and U/Pb age study. American Journal of Science, 292(5), 317-355.

Currie, K.L. (1995): The northeastern end of the Dunnage Zone in Newfoundland; Atlantic Geology, v. 31, p. 25-38.

Currie, K.L. (1995b): A tale of shale-stratigraphic problems in the Gander River map area, Newfoundland; in Current Research 1995-D; Geological Survey of Canada. p. 73-80.

Dubé, B. and Gosselin, P. (2007): Greenstone-hosted quartz-carbonate vein deposits, in Goodfellow, W.D., ed., Mineral Deposits of Canada: A Synthesis of Major Deposit-Types, District Metallogeny, the Evolution of Geological Provinces, and Exploration Methods; Geological Association of Canada, Mineral Deposits Division, Special Publication No. 5, p. 49-73.

Ermer, P. (1986): Geology of the Long-Range Inlier in the Sandy Lake map area: In Current Research, Part B: Geol. Sur. Can., Paper 86-1B, p- 19-29.

Evans, D.A.D. (2021). Chapter 17 - Meso-Neoproterozoic Rodinia Supercycle; in Pesonen, L.J., Salminen, J., Elming, S.-#RI#., Evans, D.A.D., Veikkolainen, T. (Eds.), Ancient Supercontinents and the Paleogeography of Earth. Elsevier, pp. 549-576.

Exploits Discovery Corp. (2024): Website, < Accessed on February 2, 2024, at: https://exploitsdiscovery.com/news/ >.

Exploits Discovery Corp. (2023): Exploits Announces Assay Results from Bullseye Drill Holes BE-23-018 & BE-23-020 to 029; Website, < Accessed on August 14 2023 at: https://exploitsdiscovery.com/exploits-announces-assay-results-from-bullseye-drill-holes-be-23-018-be-23-020-to-029/ >.

1 November 2024

  327 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Fyfe, W.S. and Henley, R.W. (1973): Some thoughts on chemical transport processes with particular reference to gold; Mineral Science Engineering, v.5, p. 295-303.

Galloper Gold Corp. (2024): Mint Pond project; Website, < Accessed on February 2, 2024, at: https://gallopergold.com/mint-pond/ >.

Gardner, M. (2021): Geology Corner: The nuts and bolts of feasibility studies on gold; Canadian Mining Journal, January 14, 2021.

Goldfarb, R., Snee, L. and Miller, L. (1991): Rapid dewatering of the crust deduced from ages of mesothermal gold deposits; Nature, v.354, p.296-298. (https://doi.org/10.1038/354296a0)

Goldfarb, R.J., Richard, J. and Groves, D.I. (2015): Orogenic gold: Common or evolving fluid and metal sources through time; Lithos, v.233, p.2-26. (https://doi.org/10.1016/j.lithos.2015.07.011)

Gossan Resources Ltd. (2024): Gander Gold property; Website, < Accessed on February 2, 2024, at: https://gossan.ca/the-gander-gold-property/ >.

Harper, D.A.T., MacNiocaill, C. and Williams, S.H. (1996): The palaeogeography of Early Ordovician Iapetus terranes: An integration of faunal and palaeomagnetic constraints; Palaeogeography, Palaeoclimatology, Palaeoecology, v.121, p.297-312.

Hemlo Explorers Inc. (2024): Hemlo Explorers Closes Acquisition of Rocky Shore Metals and its Gold Anchor Project; News Release dated September 5, 2024, < Available on November 14, 2024, at: https://hemloexplorers.ca/news/2024/hemlo-explorers-closes-acquisition-of-rocky-shore-metals-and-its-gold-anchor-project/ >.

Henderson, B.J., Collins, W.J., Brendan Murphy, J., Hand, M. (2018): A hafnium isotopic record of magmatic arcs and continental growth in the Iapetus Ocean: The contrasting evolution of Ganderia and the peri-Laurentian margin. Gondwana Research. 58, p. 141-160.

Holmes, D. and Michaud, M. (2017): Report on November 2016 Till Sampling for Gold; Overburden Drilling Management Limited.

Honsberger, I.W., Bleeker, W., Kamo, S.L., and Sandeman, H.A.I. (2022): Latest Silurian syntectonic sedimentation and magmatism and Early Devonian orogenic gold mineralization, central Newfoundland Appalachians, Canada: Setting, structure, lithogeochemistry, and high-precision U-Pb geochronology; GSA Bulletin, v. 134, p. 2933-2957.

Karlstrom, K.E., van der Pluum, B.A., and Williams, P.F. (1982): Structural interpretation of the eastern Notre Dame Bay area, Newfoundland. Regional post-Middle Silurian thrusting and asymmetrical folding. Canadian Journal of Earth Sciences, 19, pp. 2325-2341.

Kennedy, M.J. and McGonigal, M.H. (1972): The Gander Lake and Davidsville Groups of northeastern Newfoundland: new data and geotectonic implications. Canadian Journal of Earth Sciences 9, pp. 452-459.

Kontak, D.J., O’Reilly, G.A. and Chatterjee, A.K. (1990): The southwest Nova Scotia tin domain, Yarmouth County, Nova Scotia: implications for tin metallogeny in the Meguma Terrane, Nova Scotia; Mines and Minerals Branch Report of Activities, Part B. Edited by D.R. MacDonald. Nova Scotia Department of Mines and Energy, Report 90-1, pp. 13-32.

Labonte, J.A. and Piercey, S. (2012): Thirteenth year assessment report on prospecting, geochemical exploration and petrography for licence 6658M on claims in the Paul’s Pond area, Central Newfoundland, for Cornerstone Resources Incorporated. Geofile Report 002D/11/0771.

Labrador Gold Corp. (2022): Labrador Gold Announces 2.02 g/t Au Over 32 Metres at Big Vein the Longest Mineralized Intersection at Kingsway to Date; Website, < Accessed on September 8, 2022 at: https://labradorgold.com/news-releases/labrador-gold-announces-2-02-g-t-au-over-32-metres-4625/ >.

Labrador Gold Corp. (2024): Kingsway project; Website, < Accessed on February 2, 2024, at: https://labradorgold.com/projects/kingsway-project/ >.

Lafrance, B. and Williams, P.F. (1992): Silurian deformation in eastern Notre Dame Bay, Newfoundland; Canadian Journal of Earth Sciences v. 30(7), p.1549-1552.

McHenry, M. and Dunlop, P. (2015): The subglacial imprint of the last Newfoundland Ice Sheet, Canada; Journal of Maps, v. 12, p. 462-483.

McNicoll, V.J., Squires, G.C., Wardle, R.J., Dunning, G.R., and O’Brien, B.H. (2006): U-Pb Geochronological Evidence for Devonian Deformation and Gold Mineralization in the Eastern Dunnage Zone, Newfoundland; Current Research (2006) Newfoundland and Labrador Department of Natural Resources Geological Survey, Report 06-1, p. 45-60.

1 November 2024

  328 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Mineral Claims Recorders Office of Newfoundland and Labrador, May 2015: Acquiring mineral rights and managing your mineral exploration license. https://www.gov.nl.ca/iet/files/mines-exploration-guidelines-claims-brochure-2015.pdf

Natural Resources Canada (2020: Height Reference System Modernization. (https://www.nrcan.gc.ca/sites/nrcan/files/files/pdf/Height_reference_system_modernization_(EN).pdf.)

Newsfile Corp. (2023): Gossan Resources Announces Results of Geochemical Sampling Program at its Gander Property, Newfoundland; News Release dated July 27, 2023, https://www.newsfilecorp.com/release/175084/Gossan-Resources-Announces-Results-of-Geochemical-Sampling-Program-at-its-Gander-Property-Newfoundland >.

New Found Gold Corp. (2020a): Mexican Gold To Complete Business Combination with New Found Gold; Intersects 92.86 g/t Au Over 19.0 Metres At Queensway Gold Project In Newfoundland; News Release dated 2020-01-28; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2020b): New Found Intercepts 41.2 g/t Au over 4.75 m and 25.4 g/t Au over 5.15 m in New High-Grade Discovery at the Lotto Zone, Located 2 km North of the High-Grade Keats Discovery, Queensway Project, Newfoundland; News Release dated 2020-10-02; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2020c): New Found Intercepts 22.3 g/t Au over 41.35m and 31.2 g/t Au over 18.85m in Initial Step-Out Drilling at Keats Zone, Queensway Project, Newfoundland; News Release dated 2020-10-27; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2020d): New Found Intercepts 44.5 g/t Au over 6.85m in 60m Step-Out at Keats Zone, Queensway Project, Newfoundland; News Release dated 2020-11-16; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2020e): New Found Gold Intercepts 45.3 g/t Au over 13.1m and 25.0 g/t Au over 16.85m in Step-Out Drilling at Keats Zone, Queensway Project, Newfoundland; News Release dated 2020-12-15; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021a): 50 Meter Step-Out Hole at Keats Intercepts Broad, Shallow, High-Grade Intervals: 22.5 g/t Au over 10.4m and 31.4 g/t Au over 15.9m; News Release dated 2021-01-11; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021b): New Found Intercepts 18.1 g/t Au over 6.5m including 38.7 g/t Over 2.95m in New “Sunday Zone” Discovery in the Appleton Fault Hanging Wall, 2 km North of Keats Zone; News Release dated 2021-01-14; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021c): New Found Intercepts 28.4 g/t Au over 13.8m and 25.0 g/t Au over 10.3m at Keats, Provides Exploration Overview; News Release dated 2021-02-11; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021d): New Found Intercepts 224.7 g/t Au over 2.45m at Lotto; News Release dated 2021-02-23; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021e): Keats Step-Out Returns 29.1 g/t Au over 11.4m, Extends High-Grade Zone to 250m Down Plunge; News Release dated 2021-03-01; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021f): New Found Intercepts 24.0g/t over 46.0m and 27.0g/t over 30.1m at Keats, High-grade Gold Mineralization Discovered in Footwall Veins; News Release dated 2021-03-10; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021g): Keats Step-Out Returns 61.8 g/t Au over 13.7m, Extends High-Grade Zone to 285m Down-Plunge; News Release dated 2021-03-16; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021h): New Found Intercepts 51.3 g/t Au over 3.20m and 53.3 g/t Au over 3.10m in Step-outs to Depth at Lotto; News Release dated 2021-03-23; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021i): Keats Infill Drilling Returns 37.2 g/t Au over 6.45m and 17.9 g/t Au over 8.45m; News Release dated 2021-03-29; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021j): Keats Infill Drilling Returns 106.5 g/t Au over 9.15m and 45.6 g/t Au over 4.05m; News Release dated 2021-04-07; < Available on New Found Gold Corp.’s website >.

1 November 2024

  329 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

New Found Gold Corp. (2021k): Keats Infill Drilling Returns 261.3 g/t Au over 7.2m, Queensway Program Expanded to 10 Drills; News Release dated 2021-04-20; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021l): New Found Intercepts 63.7 g/t Au over 8.45m and 16.9 g/t Au Over 2.5m in 50m Step-out to South at Keats; News Release dated 2021-04-27; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021m): New Found Intercepts 124.4 g/t Au Over 17.7m and 131.1 g/t Au over 4.65m at Keats; News Release dated 2021-05-04; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021n): New Found Intercepts 146.2 g/t Au over 25.6m in 65m step-out to South at Keats, Extends High-Grade Zone to 425m Down-Plunge; News Release dated 2021-05-21; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021o): New Found Intercepts 21.4 g/t Au over 8.05m and 14.9 g/t Au over 12.9m in 40m step-out at Keats, Extends High-Grade Zone to 465m Down-Plunge; News Release dated 2021-06-15; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021p): New Found Intercepts 150.3 g/t Au over 11.5m at Lotto; News Release dated 2021-06-23; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021q): New Found Intercepts 430.2 g/t Au Over 5.25m in New Discovery at Golden Joint Zone, 1km North of Keats; News Release dated 2021-06-30; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021r): New Found Provides Appleton Fault Zone Exploration Update; News Release dated 2021-07-06; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021s): New Found Intercepts 111.4 g/t Au over 2.65 m and 76.8 g/t Au over 2.80 m at Lotto Main Vein: Doubles the Vertical Depth to 200 m; News Release dated 2021-09-08; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021t): New Found Intercepts More High-Grade Gold at Keats; Extends Zone 200m Vertically Towards Surface; News Release dated 2021-09-15; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021q): New Found Intercepts 64.94 g/t Au over 2.10m in Step-Out Drilling at the Golden Joint HW Zone and Extends the Golden Joint Main Vein to 235m Vertical Depth; News Release dated 2021-09-30; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021r): New Found Discovers New High - Grade Zone at Keats; Intercepts 88.53 g/t Au over 3.35m Below Keats Main Zone; News Release dated 2021-10-13; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2021s): New Found Intercepts 61.50 g/t Au over 5.20m at Keats 65m Step-Out, Extends High-Grade Zone to 530m Down Plunge; News Release dated 2021-10-14; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022a): New Found Enters into Definitive Property Option Agreement, Adds 6.1km of Prospective Strike Length Along Appleton Fault at Queensway North. < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022b): New Found Makes New Discovery Intercepting 28.20 g/t Au Over 4.50m at Keats Footwall Zone, 145m Below the Keats Main Zone, Reports First Results Using Chrysos PhotonAssayTM Method; News Release dated 2022-01-26; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022c): New Found Intercepts 70.65 g/t Au Over 5.25m at Golden Joint Main Vein, Extending Zone to 285m Vertical Depth; News Release dated 2022-01-06; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022d): New Found Intercepts 56.69 g/t Au Over 2.45m at the New Keats Footwall Zone Discovery; News Release dated 2022-01-13; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022e): New Found Intercepts 98.13 g/t Au Over 3.85m at Golden Joint, Extending the High-Grade Zone to 305m Vertical Depth; News Release dated 2022-01-19; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022f): New Found Intercepts 62.3 g/t Au Over 2.00m at Keats Main, Extends High-Grade Zone to 845m Down Plunge; News Release dated 2022-02-24; < Available on New Found Gold Corp.’s website >.

1 November 2024

  330 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

New Found Gold Corp. (2022g): New Found Intercepts 47.82 g/t Au over 9.75m at Keats Main, Extends High-Grade Zone to Surface with Interval of 55.61 g/t Au over 3.20m; News Release dated 2022-03-02; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022h): New Found Intercepts 31.88 g/t Au over 2.05m & 25.4 g/t Au over 2.25m at New Gold Discoveries on the JBP Fault Zone approximately10km NE of the Keats/Golden Joint/Lotto Discoveries; News Release dated 2022-03-09; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022i): New Found Intercepts 69.15 g/t Au over 14.15m at Golden Joint & Extends Lotto High-Grade to 225m Vertical Depth; News Release dated 2022-03-24; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022j): New Found Intersects 21.12 g/t Au over 7.20m, 79.81 g/t Au over 3.00m & 119.45 g/t over 2.40m at Keats Zone & Identifies New High-Grade Near Surface Mineralization; News Release dated 2022-04-11; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022k): New Found Makes New Discovery Between Keats and Golden Joint Intersecting 43.9 g/t Au Over 3.85m; News Release dated 2022-04-13; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022l): New Found Makes Two New Near Surface Discoveries North of the Keats Zone Intersecting 275 g/t Au Over 2.15m and 8.70 g/t Au Over 6.75m; News Release dated 2022-05-04; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022m): New Found Intersects 9.12 g/t Au Over 8.20m & 42.6 g/t Au Over 11.75m Starting 9m From Surface & 55.1 g/t Au Over 5.10m at the Keats Main Zone; News Release dated 2022-06-06; < Available on New Found Gold Corp.’s website.

New Found Gold Corp. (2022n): New Found Intercepts 89.5 g/t Au Over 2.00m in New “Tuesday” Zone Discovery at Lotto Zone; News Release dated 2022-06-08; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022o): Systematic Drilling Outlines New High-Grade Mineralized Vein Sets Over 630m Strike, Connecting Keats and 515 Zones; News Release dated 2022-08-02; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022p): New Found Intercepts 18.95 g/t Au Over 5.75m in Near-Surface 60m Step-Out at Keats North and Provides Exploration Update; News Release dated 2022-09-01; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022q): New Found Intercepts 152.1 g/t Au Over 3.85m & 12.98 g/t Au Over 14.95m at Lotto Main Vein, Confirms Continuity of High-Grade Over 220m Strike; News Release dated 2022-09-13; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022r): New Found Discovers New High-Grade Gold Zone West of the Appleton Fault Intercepting 10.4 g/t Au Over 10.5m & 17.9 g/t Au Over 4.2m at “Keats West”; News Release dated 2022-09-27; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022s): New Found Intercepts 68.19 g/t Au Over 2.05m & 45.05 g/t Au Over 2.25m, Extends Keats Main Zone to Over 1km Along Strike; News Release dated 2022-10-18; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022t): New Found Intercepts 33.8 g/t Au Over 2.35m, 37.4 g/t Au Over 2.10m & 22.8 g/t Au Over 2.20m at New “Lotto North” Discovery; News Release dated 2022-11-02; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022u): New Found Intercepts 85.7 g/t Au Over 5.65m & 13.4 g/t Au Over 9.05m at Keats Main Zone, Initiates Use of Chrysos PhotonAssay™ Method; News Release dated 2022-11-16; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022v): New Found Intercepts 18.6 g/t Au Over 15.95m Extending Keats West High-Grade Discovery by 200m Up-Dip & Intersects Broad Domains of Gold Mineralization; News Release dated 2022-11-23; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022w): New Found Intercepts 42.6 g/t Au Over 32m at Keats West, Includes High-Grade Interval of 171.6 g/t Au Over 6.5m; News Release dated 2022-11-28; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2022x): New Found Reports Several High-Grade Intercepts From Keats North Including 117 g/t Au Over 2.00m, 36.5 g/t Au Over 2.15m & 20.8 g/t Au Over 2.00m; News Release dated 2022-12-05; < Available on New Found Gold Corp.’s website >.

1 November 2024

  331 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

New Found Gold Corp. (2023a): New Found Announces the Continuation of Environmental Baseline and Pre-Development Studies; News Release dated January 9, 2023, < Available on New Found Gold Corp.’s website.

New Found Gold Corp. (2023b): New Found Completes Keats Trench Excavation and Phase 1 Mapping Program, Exposes High-Grade East-West Vein; News Release dated November 17, 2023, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2023c): New Found Announces Completion of 3-D Seismic Survey; News Release dated August 21, 2023, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2023d): New Found Intercepts 16.1 g/t Au Over 5.30m at Lotto North; Intercepts Gold Mineralization on West Side of Appleton Fault at “Zone 36”; News Release dated 2023-01-10; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2023e): New Found Discovers Multiple New Gold Zones Extending 1.5km South of Keats, Increases Appleton Fault Zone High-Grade Gold Corridor to Over 4km in Strike Length; News Release dated 2023-01-18; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2023f): New Found Intercepts 6.7 g/t Au Over 24m at Keats West & Discovers New Vein Between Golden Joint and Keats North Intercepting 50.3 g/t Au Over 2.5m; News Release dated 2023-01-24; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2023g): New Found Discovers Three New Gold Zones Along Appleton Fault Zone - Monte Carlo, K2 & Everest; Extends AFZ Mineralized Envelope to 4.1km x 400m; News Release dated May 10, 2023, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2023h): New Found Hits Significant Gold Mineralization in 27 of 33 Holes Drilled in Inaugural Drill Program at Queensway South Including 19.0 g/t Au Over 3.15m; News Release dated May 25, 2023, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2023i): New Found Intercepts 17.8 g/t Au Over 8.3m at 421 Zone, Drills Mineralization 2.7km South of Keats at Grouse Zone; News Release dated September 20, 2023, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2023j): New Found Intercepts 17.1 g/t Au Over 11.35m & 1.82 g/t Au Over 40m, Further Defines High-Grade Domain at Keats West; News Release dated October 4, 2023, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2023k): New Found Intercepts 92 g/t Au Over 2m at Monte Carlo; News Release dated October 11, 2023, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2023l): New Found Intercepts 67.5 g/t Au Over 2.65m, 66.2 g/t Au Over 2.65m & 16.5 g/t Au Over 7.40m, Expands High-Grade Gold at Golden Joint to Surface; News Release dated October 23, 2023, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2023m): New Found Hits 14 g/t Au Over 9m, 32 g/t Au Over 2.55m & 6.7 g/t Au Over 10.1m Near-Surface at Iceberg-Iceberg East; News Release dated October 25, 2023, < Available on New Found Gold Corp.’s website.

New Found Gold Corp. (2023n): New Found Hits 14 g/t Au Over 9m, 32 g/t Au Over 2.55m & 6.7 g/t Au Over 10.1m Near-Surface at Iceberg-Iceberg East; News Release dated October 25, 2023, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2023o): New Found Intercepts Significant High-Grade Intervals at K2, Expands Mineralized Footprint of Zone to 490m x 395m; News Release dated November 29, 2023, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2023p): Advancing the high-grade Queensway Gold Project; Company presentation; < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2023q): New Found Signs Memorandum of Understanding with Maritime Resources Corp. For Use of the Pine Cove Mill; News Release dated August 14, 2023, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2023r): New Found Intercepts 43 g/t Au Over 11.6m at Keats West, News Release dated December 6, 2023, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2024a): New Found Makes First New High-Grade Discovery of 2024, Intercepts 26 g/t Au Over 7.65m & 23 g/t Au Over 5.25m at the “Honeypot Zone”, News Release dated January 10, 2024, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2024b): New Found Intercepts 27.5 g/t Au Over 7m & 8.69 g/t Au Over 12m at K2, Extends High-Grade to Surface, News Release dated January 31, 2024, < Available on New Found Gold Corp.’s website >.

1 November 2024

  332 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

New Found Gold Corp. (2024c): New Found Intercepts 3.2 g/t Au Over 43.8m and 10.3 g/t Au Over 13m at Keats West & Defines a New Gold Domain at Cokes Zone, News Release dated February 22, 2024, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2024d): New Found Makes New Discovery with 35 g/t Au Over 17m Including 1,910 g/t Au Over 0.3m at “Vegas Zone”, News Release dated February 29, 2024, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2024e): New Found Makes New Discovery with 35 g/t Au Over 17m Including 1,910 g/t Au Over 0.3m at “Vegas Zone”, News Release dated March 13, 2024, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2024f): New Found Makes New Discovery with 35 g/t Au Over 17m Including 1,910 g/t Au Over 0.3m at “Vegas Zone”, News Release dated March 26, 2024, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2024g): New Found Intercepts 17.8 g/t Au Over 13.5m, 27.7 g/t Au Over 2.7m, 12.7 g/t Au Over 4.6m and 1.23 g/t Au Over 47.2m at K2 Zone, News Release dated April 10, 2024, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2024h): New Found Intercepts 14.8 g/t Au Over 5m at Honeypot & 43.1 g/t Au Over 2m at Jackpot, News Release dated April 17, 2024, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2024i): New Found Reports Positive Phase 1 Metallurgical Test Results Demonstrating 90% to 96% Gold Extraction at Queensway; News Release dated April 3, 2024, < Available on New Found Gold Corp.’s website >.

New Found Gold Crop. (2024j): New Found Completes Acquisition of Labrador Gold’s Kingsway Project; News Release dated July 9, 2024, < Available on New Found Gold Corp.’s website >.

New Found gold Corp. (2024k): “New Found Provides Update on Deep Drilling Program, Engages Devico Directional Drilling Services at Queensway” News Release dated June 11, 2024, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2024l): “New Found Intercepts Nine New Gold Zones Spanning 3km in Strike, Doubles Known Vertical Extent of Gold Mineralization to 820m Depth at Queensway” News release dated July 11, 2024, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2024m): “New Found Intersects 300 g/t Au Over 5.1m and 215 g/t Au Over 5.2m at Keats with Phase I Trench Channel Samples” News release dated September 23, 2024, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2024n): “New Found Intercepts 105 g/t Au Over 2.10m & 10.4 g/t Au Over 4.45m at “Pistachio” Zone at Kingsway, Hits 36.7 g/t Au Over 2m at Jackpot” News Release dated October 24, 2024, < Available on New Found Gold Corp.’s website >.

New Found Gold Corp. (2024o) “New Found Makes New Discovery at Depth With 343 g/t Au Over 2.15m, 40.6 g/t Over 2.20m & 9.51 g/t Au Over 7.45m at “Golden Dome” Zone” October 31 2024< Available on New Found Gold Corp.’s website >.

O’Brien, B.H. (2003): Geology of the central Notre Dame Bay region (parts of NTS areas 2E/3,6,11) northeastern Newfoundland. Newfoundland and Labrador Department of Mines and Energy, Geological Survey, Report 03-03, 147 p.

O’Brien, B.H., O’Brien, S.J., and Dunning, G.R. (1991): Silurian cover, Late Precambrian-Early Ordovician basement, and the chronology of Silurian orogenesis in the Hermitage Flexure Newfoundland Appalachians); American Journal of Science, v. 291, p. 760-799.

O’Neil, P. (1987): Geology of the west half of the Wier’s Pond (2E/1) map area; Newfoundland Department of Mines and Energy, Mineral Development Division, Current Research, p. 271-281.

O’Neill, P. P. (1990): Geology of the Northeast Gander Lake Map Area (NTS 2D/15) and the Northwest Gambo Map Area (NTS 2D/16); Current Research (1990) Newfoundland Dept. of Mines and Energy, Geological Survey Branch, Report 90-1, p. 317-326.

O’Neill, P., Blackwood, R.F. (1989): A Proposal for revised stratigraphic nomenclature of the Gander and Davidsville Groups and the Gander River Ultrabasic Belt, of Northeastern Newfoundland; in Current Research - Newfoundland Department of Mines. Geological Survey of Newfoundland, (Report 89-1), p. 127-130.

Pollock, J.C., Wilton, D.H.C., van Staal, C.R. and Morrissey, K.D. (2007): U-Pb detrital zircon geochronological constraints on the Early Silurian collision of Ganderia and Laurentia along the Dog Bay Line: The terminal Iapetan suture in the Newfoundland Appalachians; American Journal of Science, v.307, n.2, p.399-433.

1 November 2024

  333 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Pollock, J.C., Hibbard, J.P., van Staal, C.R. (2012): A paleogeographical review of the peri-Gondwanan realm of the Appalachian orogen. Canadian Journal of Earth Science. 49, p. 1-30.

Ryan, R.J. and Smith, P.K. (1998): A review of mesothermal gold deposits of the Meguma Group, Nova Scotia, Canada; Ore Geology Reviews, v.13, p.153-184.

Sandeman, H.A.I. and Honsberger, I. (2023): Gold Mineralization at the Valentine Lake, Moosehead, Queensway and Kingsway Projects; Geological Association of Canada Newfoundland and Labrador Section, 2023 fall field trip, September 29 - October 1, 2023, 63 p, < Available on May 1, 2024, at: https://static1.squarespace.com/static/645104ce7aa94f71ba09a1d6/t/6514334e180c8d3bd100f10f/1695822689120/Field+Guide+2023.pdf >

Sandeman, H.A.I., Peddle, C. and Newman, R. (2018): Beaver Brook Antimony Mine Revisited: An Update on Operations and New Structural and Geological Observations; Newfoundland and Labrador Department of Natural Resources Geological Survey Report 18-1, p.123-152.

Sheppard, D. (1994): Eighth Year Assessment Report Summary of Diamond Drilling Activities Conducted Within Licence No. 4344, The ‘Knob’ Prospect N.T.S. 20/15. Geofile Report 002D_0296.

Sky Gold Corp. (2021a): Sky Gold highlights gold in soil geochemical anomalies on the Mustang Property, Newfoundland; News Release dated June 2, 2021, < Available on October 23, 2024, at: https://www.skygoldcorp.com/20210602-sky-gold-highlights-gold-in-soil-geochemical-anomalies-on-the-mustang-property-newfoundland >.

Sky Gold Corp. (2021b): Sky Gold reports surface rock grab samples up to 12.14 au g/t from the Mustang Project, Newfoundland; News Release dated January 25, 2021, < Available on October 23, 2024, at: https://www.skygoldcorp.com/20210125-sky-gold-reports-surface-rock-grab-samples-up-to-12.14-au-gt-from-the-mustang-project-newfoundland >.

Sky Gold Corp. (2021c): Sky Gold reports drill results from the Mustang Project, Newfoundland; News Release dated July 15, 2021, < Available on October 23, 2024, at: https://www.juniorminingnetwork.com/junior-miner-news/press-releases/1985-tsx-venture/skyg/103282-sky-gold-reports-drill-results-from-the-mustang-project-newfoundland.html >.

Sky Gold Corp. (2022): Sky Gold commences work with Goldspot to define targets at The Mustang Project, Newfoundland; News Release dated July 15, 2021, < Available on October 23, 2024, at: https://www.skygoldcorp.com/20221020-sky-gold-commences-work-with-goldspot-to-define-targets-at-the-mustang-project-newfoundland >.

Srivastava, M. R. (2022): Exploration Update Of The Queensway Project Newfoundland And Labrador, Canada (May 31, 2022). Amended and Restated National Instrument 43-101 Technical Report Prepared by RedDot3D Inc. on behalf of New Found Gold Corp. (https://newfoundgold.ca/wp-content/uploads/2022/06/2022-Queensway-43-101-Technical-Report-amended-final.pdf).

Sterk, R. and Kruse, S. (2021): Queensway Project, National Instrument 43-101 Technical Report prepared by RSC Consulting Limited on behalf of New Found Gold Corp. (https://newfoundgold.ca/wp-content/uploads/2022/05/Tech-Report.pdf).

Tettelaar, T. (2024): NI 43-101 Technical Report for the Kingsway Gold Project, Newfoundland and Labrador, Canada; National Instrument 43-101 technical report prepared for Labrador Gold Corp. and effectively dated March 14, 2024, 124 p.

Tickner, J., Ganly, B., Lovric, B. and O'Dwyer, J. (2017): Improving the sensitivity and accuracy of gamma activation analysis for gold; Applied Radiation and Isotopes, v.122, p.28-36.

Valverde-Vaquero, P. and van Staal, C. (2001): Relationships between the Dunnage-Gander zones in the Victoria Lake-Peter Strides Pond area; Newfoundland Department of Mines and Energy Geological Survey, Current Research Report 2001-1, p. 1-9.

Valverde-Vaquero, P., van Staal, C.R., McNicoll, V., Dunning, G.R. (2006): Mid-Late Ordovician magmatism and metamorphism along the Gander margin in central Newfoundland. Journal of the Geological Society, London. 163, p. 347-362.

van der Pluijm, B.A. (1986): Geology of eastern New World Island, Newfoundland: An accretionary terrane in the northeastern Appalachians; Geological Society of America Bulletin, v. 97, p. 932-945.

van Staal, C.R., Dewey, J.F., Niocaill, C.M., McKerrow, W.S. (1998). The Cambrian-Silurian tectonic evolution of the northern Appalachians and British Caledonides: history of a complex, west and southwest Pacific-type segment of Iapetus; in Blundell, D.J., and Scott, A.C. (eds) Lyell: the Past is the Key to the Present.Geological Society, London, Special Publications, 143, p. 197-242.

1 November 2024

  334 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

Van Staal, C.R., Valverde-Vaquero, P., Zagorevski, A., and Whalen, J.B. (2009): Pre-Carboniferous, episodic accretion-related, orogenesis along the Laurentian margin of the northern Appalachians; Geological Society London Special Publications v. 327(1), p. 271-316.

van Staal, C.R., Barr, S.M. (2012): Lithospheric architecture and tectonic evolution of the Canadian Appalachians and associated Atlantic margin; in Tectonic Styles in Canada: The LITHOPROBE Perspective. Geological Association of Canada, Special Paper 49. p. 41-95.

van Staal, C.R., Zagorevski, A., McNicoll, V.J. and Rogers, N. (2014): Time-transgressive Salinic and Acadian orogenesis, magmatism, and Old Red Sandstone sedimentation in Newfoundland; Geoscience Canada, v. 41, p. 138-164.

 

van Staal, C.R., Barr, S.M., Waldron, J.W.F., Schofield, D.I., Zagorevski, A., White, C.E. (2021). Provenance and Paleozoic tectonic evolution of Ganderia and its relationships with Avalonia and Megumia in the Appalachian-Caledonide orogen. Gondwana Research, 98, p. 212-243.

Williams, H. (1972): The Appalachian Structural Province: Special Paper - Geological Association of Canada, v. 11, p. 181-261.

Williams, H. (1979). Appalachian Orogen in Canada. Canadian Journal of Earth Science, 16, p. 792-807.

Williams, H. (1995): Geology of the Appalachian - Caledonian Orogen in Canada and Greenland. Geological Society of America.

Williams, H. (2004): Generalized Interpretive Map - Newfoundland Appalachians, Department of Natural Resources, Geological Survey of Newfoundland and Labrador. Modified from J. P. Hayes (1987): https://www.gov.nl.ca/iet/files/mines-maps-nf.pdf

Williams, H., Colman-Sadd, S. P., & Swinden, H. S. (1988): Tectonic-stratigraphic subdivisions of central Newfoundland. Current Research, Part B. Geological Survey of Canada, Paper, 88, 91-98.

Williams, H., Currie, K. L., & Piasecki, M. A. J. (1993): The Dog Bay Line: a major Silurian tectonic boundary in northeast Newfoundland. Canadian Journal of Earth Sciences, 30(12), 2481-2494.

Williams, H., Piasecki, M.A.J. (1990). The Cold Spring Melange and a possible model for Dunnage-Gander zone interaction in central Newfoundland. Canadian Journal of Earth Science, 27, p. 1129-1134.

Willman, C.E. (2007): Regional structural controls of gold mineralization, Bendigo and Castlemaine goldfields, Central Victoria, Australia; Mineralium Deposita, v.42, p.449-463.

Zagorevski, A. and Rogers, N. (2008): Stratigraphy and structural geology of the Ordovician Volcano-Sedimentary Rocks in the Mary March Brook area; Newfoundland and Labrador Department of Natural Resources Geological Survey, Current Research Report 08-1, p. 101-113.

 

1 November 2024

  335 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

28 Certificate of Author

 

I, D. Roy Eccles, P. Geol. P. Geo., do hereby certify that:

 

1. I am a Senior Consulting Geologist and Chief Operations Officer of APEX Geoscience Ltd., 100 11450-160 Street, Edmonton, Alberta T5M 3Y7.
2. I graduated with a B.Sc. in Geology from the University of Manitoba in Winnipeg, Manitoba in 1986 and with a M.Sc. in Geology from the University of Alberta in Edmonton, Alberta in 2004.
3. I am and have been registered as a Professional Geologist with the Association of Professional Engineers and Geoscientists of Alberta (APEGA, Membership Number 74150) since 2003, and Newfoundland and Labrador Professional Engineers and Geoscientists (PEGNL, Membership Number 08287) since 2015.
4. I have worked as a geologist for more than 35 years since my graduation from university and have been involved in all aspects of mineral exploration, mineral research, and mineral resource estimations for metallic, industrial, and specialty mineral projects and deposits.
5. I have read the definition of “Qualified Person,” as set out in National Instrument 43-101 Standards of Disclosure for Mineral Projects (NI 43-101). By reason of my education, affiliation with a professional association and past relevant work experience, I fulfill the requirements to be a “Qualified Person” for the purposes of NI 43-101. My technical experience includes Caledonian Orogeny gold mineralization projects (and other multi-commodity projects) in the Dunnage Zone of Newfoundland and Scotland.
6. Apart from Section 13, I prepared, and accept, responsibility for all other Items (Items 1-12, 14, 23-27) of the NI 43-101 Technical Report, New Found Gold Corp.’s Queensway Gold Project in Newfoundland and Labrador, Canada: 2024 Property Expansion and Exploration Update, with an effective date of 1 November 2024 (the “Technical Report”). I visited the Queensway Property on January 12-13, 2023, and can verify the Property licences/claims, access, infrastructure, active drilling exploration, geological setting, and the gold mineralization that is the subject of this Technical Report.
7. To the best of my knowledge, information and belief, the Technical Report contains all relevant scientific and technical information that is required to be disclosed, to make the Technical Report not misleading.
8. I have read NI 43-101 and Form 43-101F1, and the Technical Report has been prepared in compliance with that instrument and form.
9. I am independent of New Found Gold Corp. and the Queensway Property, applying to all tests in section 1.5 of Companion Policy 43-101CP.
10. I prepared identical Items for New Found Gold Corp.’s previous NI 43-101 technical reports, which were effectively dated January 24, 2023, and April 18, 2024; these reports are now superseded and replaced by this current technical report. I have had no other previous involvement with the Queensway Gold Project that is the subject of the Technical Report.

 

Effective date: 1 November 2024

Signing date: 15 November 2024

 

 

 

 

 

 

 

(signed and sealed) “Roy Eccles”

 

Roy Eccles MSc. P. Geo. P. Geol.

 

 

1 November 2024

  336 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

 

 

I, Mark K Jorgensen, QP Metallurgy, do hereby certify that:

 

1. I am Principal Engineer with Jorgensen Engineering and Technical Services LLC, 1230 East Jamison Avenue, Centennial, Colorado, USA, 80122.
2. I graduated with a Bachelor of Science in Chemical Engineering from the University of Nevada in 1978.
3. I am and have been registered as a Qualified Person with the Mining and Metallurgical Society of America (Member Number 01202QP) since 2005.
4. I have worked as a Metallurgical Engineer for more than 40 years since my graduation from university.
5. I have read the definition of “Qualified Person,” as set out in National Instrument 43-101 Standards of Disclosure for Mineral Projects (NI 43-101). By reason of my education, affiliation with a professional association and past relevant work experience, I fulfill the requirements to be a “Qualified Person” for the purposes of NI 43-101. My technical experience includes design, construction, and operation of gold leaching processing plants with crushing, grinding, gravity gold recovery, cyanide leaching, cyanide destruction and tailings disposal. I have designed laboratory test programs to determine methods for gold recovery and subsequent plant design.
6. I prepared, and accept responsibility, for Section 13 Mineral Processing and Metallurgy, in NI 43-101 Technical Report, New Found Gold Corp.’s Queensway Gold Project in Newfoundland and Labrador, Canada: 2024 Property Expansion and Exploration Update with an effective date of 1 November 2024 (the “Technical Report”). My most recent site inspection at the Queensway Project was completed on November 29, 2023.
7. To the best of my knowledge, information and belief, the Technical Report contains all relevant scientific and technical information that is required to be disclosed, to make the Technical Report not misleading.
8. I have read NI 43-101 and Form 43-101F1, and the Technical Report has been prepared in compliance with that instrument and form.
9. I am independent of New Found Gold Corp., applying to all tests in section 1.5 of Companion Policy 43-101CP.
10. I prepared Item 13 for New Found Gold Corp.’s previous NI 43-101 technical report effectively dated April 18, 2024; this report is now superseded and replaced by this current technical report. I have had no other previous involvement with the Queensway Gold Project that is the subject of the Technical Report.

 

Effective Date: 1 November 2024

Signing Date: 15 November 2024

 

 

(signed) “Mark K Jorgensen”

 

Mark K Jorgensen, QP Metallurgy

1 November 2024

  337 

New Found Gold Corp.’s Queensway Gold Project, NL: 2024 Exploration Update Technical Report

 

I, Gary Simmons, Q.P. Metallurgy do hereby certify that:

 

1. I am Owner of GL Simmons Consulting, LLC, located at 15923 Shadow Mountain Ranch Road, Larkspur, Colorado, USA, 80118.
2. I graduated with a Bachelor of Science in Metallurgical Engineering from the Colorado School of Mines in 1973.
3. I am and have been registered as a Qualified Person with the Mining and Metallurgical Society of America (Member Number 01013QP) since 2008. I am also a Registered Member of the Society for Mining, Metallurgy and Exploration (SME), Member ID 2959300.
4. I have worked as a Metallurgical Engineer for more than 50 years since my graduation from university.
5. I have read the definition of “Qualified Person,” as set out in National Instrument 43-101 Standards of Disclosure for Mineral Projects (NI 43-101). By reason of my education, affiliation with a professional association and past relevant work experience, I fulfill the requirements to be a “Qualified Person” for the purposes of NI 43-101. I have held senior mine and metallurgical production and corporate level management, technical and development positions for mining companies in the United States, Canada, Australia, Indonesia, Peru, and Mexico. I have experience in test work design and reporting, cyanide leaching, and cyanide plant operation that is relevant to the Queensway Project.
6. I prepared, and accept responsibility, for Section 13 Mineral Processing and Metallurgy, in NI 43-101 Technical Report, New Found Gold Corp.’s Queensway Gold Project in Newfoundland and Labrador, Canada: 2024 Property Expansion and Exploration Update with an effective date of 1 November 2024 (the “Technical Report”). My most recent site inspection at the Queensway Property was conducted on October 19, 2023.
7. To the best of my knowledge, information and belief, the Technical Report contains all relevant scientific and technical information that is required to be disclosed, to make the Technical Report not misleading.
8. I have read NI 43-101 and Form 43-101F1, and the Technical Report has been prepared in compliance with that instrument and form.
9. I am independent of New Found Gold Corp., applying to all tests in section 1.5 of Companion Policy 43-101CP.
10. I prepared Item 13 for New Found Gold Corp.’s previous NI 43-101 technical report effectively dated April 18, 2024; this report is now superseded and replaced by this current technical report. I have had no other previous involvement with the Queensway Gold Project that is the subject of the Technical Report.

 

Effective Date: 1 November 2024

Signing Date: 15 November 2024

 

(signed and sealed) “Gary Simmons”

 

Gary Simmons, QP Metallurgy

 

 

 

1 November 2024   338