UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D. C. 20549

FORM 10-K

 

 

☒		ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the Fiscal Year Ended December 31, 2023

or

 

☐		Transition Report Pursuant to Section 13 or 15 (d) of the Securities Exchange Act of 1934

 

For the transition period from to

Commission File Number 1-8472

Hexcel Corporation

(Exact name of registrant as specified in its charter)

Delaware		94-1109521
(State or Other Jurisdiction of Incorporation or Organization)		(I.R.S. Employer Identification No.)

Two Stamford Plaza

281 Tresser Boulevard, 16th Floor

Stamford, Connecticut 06901

(Address of principal executive offices and zip code)

Registrant’s telephone number, including area code: (203) 969-0666

Securities registered pursuant to Section 12(b) of the Act:

Title of each class		Trading Symbol(s)		Name of each exchange on which registered
COMMON STOCK, par value $0.01		HXL		NEW YORK STOCK EXCHANGE

 

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☒ No ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company”, and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer		☒	Accelerated filer		☐
Non-accelerated filer		☐	Smaller reporting company		☐
			Emerging growth company		☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any or new revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. 

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

The aggregate market value of the registrant’s common stock held by non-affiliates was $6,418,079,952 based on the reported last sale price of common stock on June 30, 2023, which is the last business day of the registrant’s most recently completed second fiscal quarter.

The number of shares outstanding of each of the registrant’s classes of common stock, as of the latest practicable date.

Class		Outstanding as of January 31, 2024
COMMON STOCK		84,388,010

Portions of Part III will be incorporated by reference to the registrant’s definitive proxy statement, in accordance with Instruction G(3) to Form 10-K, to be filed with the Securities and Exchange Commission no later than 120 days after the end of the registrant’s fiscal year.

Auditor Firm Id: Auditor Name: Auditor Location:

00042 Ernst & Young LLP Stamford, Connecticut

 

---

 

HEXCEL CORPORATION AND SUBSIDIARIES

ANNUAL REPORT ON FORM 10-K

For the fiscal year ended December 31, 2023

TABLE OF CONTENTS

			Page
Part I
Item 1:	Business		3
Item 1A:	Risk Factors		14
Item 1B:	Unresolved Staff Comments		22
Item 1C:	Cybersecurity		22
Item 2:	Properties		24
Item 3:	Legal Proceedings		24
Item 4:	Mine Safety Disclosures		24
Part II
Item 5:	Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities		25
Item 6:	[Reserved]		25
Item 7:	Management’s Discussion and Analysis of Financial Condition and Results of Operations		25
Item 7A:	Quantitative and Qualitative Disclosures About Market Risk		25
Item 8:	Financial Statements and Supplementary Data		25
Item 9:	Changes in and Disagreements with Accountants on Accounting and Financial Disclosure		25
Item 9A:	Controls and Procedures		25
Item 9B:	Other Information		25
Item 9C:	Disclosure Regarding Foreign Jurisdictions that Prevent Inspections		26
Part III
Item 10:	Directors, Executive Officers and Corporate Governance		26
Item 11:	Executive Compensation		26
Item 12:	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters		26
Item 13:	Certain Relationships and Related Transactions and Director Independence		26
Item 14:	Principal Accountant Fees and Services		26
Part IV
Item 15:	Exhibits and Financial Statement Schedules		27
Item 16:	10-K Summary		30
Signatures			31

 

2

---

 

PART I

ITEM 1. Business.

General

Hexcel Corporation and its subsidiaries (herein referred to as “Hexcel”, “the Company”, “we”, “us”, or “our”), is a global leader in advanced lightweight composites technology. We propel the future of flight, energy generation, transportation, and recreation through excellence in providing innovative high-performance material solutions that are lighter, stronger and tougher, helping to create a better world for us all. Our broad product range includes carbon fiber, specialty reinforcements, prepregs and other fiber-reinforced matrix materials, honeycomb, resins, engineered core and composite structures for use in commercial aerospace, space and defense, and industrial applications.

We serve international markets through manufacturing facilities, sales offices and representatives located in the Americas, Europe, Asia Pacific, India, and Africa. We also had a presence in Malaysia where we were a partner in a joint venture which manufactures composite structures for Commercial Aerospace applications. In December 2023, we sold our interest in the joint venture.

We are a manufacturer of products within a single industry: Advanced Composites. We have two reportable segments: Composite Materials and Engineered Products. The Composite Materials segment is comprised of our carbon fiber, specialty reinforcements, resin systems, prepregs and other fiber-reinforced matrix materials, and honeycomb core product lines and pultruded profiles. The Engineered Products segment is comprised of lightweight high strength composite structures, radio frequency/electromagnetic interference (“RF/EMI”) and microwave absorbing materials, engineered core and specialty machined honeycomb products with added functionality and thermoplastic additive manufacturing.

 

We continue to monitor developments in ongoing geopolitical issues and conflicts globally. Although we are not experiencing direct material adverse effects upon our business, the global implications of geopolitical issues and conflicts which include increased inflation, volatile energy costs, constrained raw material availability and transportation, and thus increasing costs, as well as aircraft flight restrictions are impacting the global economy and the aerospace industry in particular.

The following summaries describe the ongoing activities related to the Composite Materials and Engineered Products segments as of December 31, 2023.

Composite Materials

The Composite Materials segment manufactures and markets carbon fibers, fabrics, and specialty reinforcements, prepregs and other fiber-reinforced matrix materials, structural adhesives, honeycomb, molding compounds, tooling materials, polyurethane systems and laminates that are incorporated into many applications, including commercial and military aircraft, transportation (including automotive, marine and rail), wind turbine blades, recreational products, and other industrial applications.

 

 

 

3

---

 

The following table identifies the principal products and examples of the primary end-uses from the Composite Materials segment:

 

SEGMENT		PRODUCTS		PRIMARY END-USES
COMPOSITE MATERIALS		Carbon Fibers		       Raw materials for prepregs, fabrics and specialty reinforcements        Filament winding for various aerospace, defense and industrial applications
		Fabrics, Multi-axials and Specialty Reinforcements		       Raw materials for prepregs        Composites and components used in aerospace, defense, automotive, wind energy, recreation, marine and other industrial applications
		Prepregs, Other Fiber-Reinforced Matrix Materials and Resins		        Epoxy resin systems         Composite structures         Commercial and military aircraft         Aero-engines         Rotorcraft         Satellites and launchers         Automotive, marine and rail         Wind Turbine blades         Skis, snowboards, bicycles and hockey sticks
		Structural Adhesives		       Bonding of metals, honeycomb and composite materials
		Honeycomb		 Composite structures and interiors  Impact and shock absorption systems  Rotorcraft blades  Acousti-Cap®
		Pultruded Profiles		 Tubes, rods, robotics and medical applications

 

Carbon Fibers: HexTow® carbon fibers are used in certain reinforcements and composite materials. Carbon fibers are also woven into carbon fabrics, used as reinforcement in conjunction with a resin matrix to produce pre-impregnated composite materials (referred to as “prepregs”). Carbon fiber is also used in filament winding to produce finished composite components. Key product applications include structural components for commercial and military aircraft and rotorcraft, jet engine fan blades and fan casings, space launch vehicles, and certain other applications such as recreational and industrial equipment.

Fabrics, Multi-axials and Specialty Reinforcements: HexForce® fabrics, multi-axials and specialty reinforcements are made from a variety of fibers, including carbon, glass, aramid and other high strength polymers, quartz, ceramic and other specialty fibers. These reinforcements are used in the production of prepregs and other matrix materials for aerospace and select industrial markets including automotive components, wind energy blades, oil exploration and production equipment, boats, surfboards, skis and other sporting goods equipment.

Prepregs: HexPly® prepregs are used in manufacturing composite laminates and monolithic structures. Prepregs are used in primary and secondary structural aerospace applications such as wing components, horizontal and vertical stabilizer components, fairings, radomes, engine fan blades and cases, engine nacelles as well as overhead storage bins and other interior components. They are also used in many of the industrial and recreational products noted above. Prepregs are manufactured by combining high-performance reinforcement fabrics or unidirectional fibers with a resin matrix to form a composite material that, when cured, has exceptional structural properties not present in either of the constituent materials individually. Prepregs are applied via hand layup, automatic tape layup and advanced fiber placement to produce finished composite components. Prepreg reinforcements include glass, carbon, aramid, quartz, ceramic and other specialty fibers. Resin matrices include bismaleimide, cyanate ester, epoxy, phenolic, polyimide and other specialty resins.

4

---

 

Other Fiber-Reinforced Matrix Materials: Fiber reinforced matrix developments include HexTool®, a specialized form of quasi-isotropic carbon fiber prepreg for use in the cost-effective construction of high temperature resistant composite tooling. HexFIT® film infusion material is a product that combines resin films and dry fiber reinforcements to save lay-up time in production and enables the manufacture of large contoured composite structures, such as wind turbine blades.

Resins: HexFlow® polymer matrix materials are sold in liquid and film form for use in direct process manufacturing of composite parts. Resins can be combined with fiber reinforcements in manufacturing processes such as resin transfer molding, resin film infusion or vacuum assisted resin transfer molding to support high volume production of composite components for both aerospace and industrial applications, without the need for customer investment in autoclaves.

Structural Adhesives: We manufacture and market a comprehensive range of HexBond® film and paste adhesives. These structural adhesives, which bond metal to metal and composites and honeycomb structures, are used in the aerospace industry and for many industrial applications.

Honeycomb: HexWeb® honeycomb is a lightweight, cellular structure generally composed of a sheet of nested hexagonal cells. It can also be manufactured in over-expanded and asymmetric cell configurations to meet special design requirements such as contours or complex curvatures. Honeycomb is primarily used as a lightweight core material and acts as a highly efficient energy absorber. When sandwiched between composite or metallic facing skins, honeycomb significantly increases the stiffness of the structure, while adding very little weight.

We produce honeycomb primarily from non-metallic materials though some honeycomb is produced from metallic materials. Non-metallic materials used in the manufacture of honeycomb include fiberglass, carbon fiber, thermoplastics, non-flammable aramid papers, aramid fiber and other specialty materials. Most metallic honeycomb is made from aluminum and is available in a selection of alloys, cell sizes and dimensions. We sell honeycomb as standard blocks and in slices cut from a block. Aerospace is the largest market for honeycomb products.

Our HexWeb® Acousti-Cap® sound attenuating honeycomb used in aircraft engines and nacelles provides dramatic noise reduction during takeoff and landing without a structural weight penalty. Acousti-Cap® incorporates a non-metallic, permeable cap material that is embedded into honeycomb core. In addition, we produce honeycomb for our Engineered Products segment for use in manufacturing finished parts for airframe original equipment manufacturers.

Polyspeed® Pultruded Profiles: Hexcel manufactures a wide range of pultruded sections including rods, flat sections, tubes and specific profiles that are usually made from carbon fiber but can also be made from glass, quartz, basalt or other fibers. The profile matrix is a Hexcel formulation of thermoset resin (epoxy or polyurethane). Hexcel pultruded profiles are used in a wide range of industrial applications.

The following tables identify the key customers and the major manufacturing facilities of the Composite Materials segment:

	COMPOSITE MATERIALS
	KEY CUSTOMERS
Aernnova	Daher	Nordam
Airbus	Dassault	Northrop Grumman
Bell (1)	Embraer	Pratt & Whitney (2)
Blizzard	FACC	Safran
BMW	General Electric	Sikorsky (4)
The Boeing Company	GKN	Syensqo
Bombardier	Gulfstream (3)	Spirit Aerosystems
CFAN	Leonardo	Toray
Collins Aerospace (2)	Lockheed Martin	RTX
CTRM Aero Composites	Mubea	Vestas

 

(1) A Textron Company

(2) A RTX Company

(3) A General Dynamics Company

(4) A Lockheed Martin Company Net sales for the Composite Materials segment to third-party customers were $1,474.2 million in 2023, $1,279.7 million in 2022, and $1,019.4 million in 2021, which represented about 80% of our net sales each year.

 

 

 

5

---

 

MANUFACTURING FACILITIES
Casa Grande, Arizona	Neumarkt, Austria
Dagneux, France	Parla, Spain
Decatur, Alabama	Roussillon, France
Duxford, England	Salt Lake City, Utah
Illescas, Spain	Seguin, Texas
Leicester, England	Stade, Germany
Les Avenières, France	Vert-le-Petit, France

 

Net sales for composite materials are highly dependent upon the number of commercial aircraft produced as further discussed under the captions “Significant Customers”, “Markets” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations”.

Engineered Products

The Engineered Products segment manufactures and markets composite structures and precision machined honeycomb parts primarily for use in the aerospace industry. Composite structures are manufactured from a variety of composite and other materials, including prepregs, honeycomb, and structural adhesives, using such manufacturing processes as autoclave processing, multi-axis numerically controlled machining, heat forming, infusion or resin transfer molding and other composite manufacturing techniques. Composite structures include HexAM® 3D printed parts, which offer significant weight cost and time-to-market reductions compared to incumbent metal or traditional composite technologies. This segment also provides advanced interference control materials, structural composites, and services; dielectric absorber foams and honeycomb; magnetic absorbers; and thermoplastics for commercial and defense applications.

The following table identifies the principal products and examples of the primary end-uses from the Engineered Products segment:

SEGMENT		PRODUCTS		PRIMARY END-USES
ENGINEERED PRODUCTS		Composite Structures		        Aircraft structures and finished aircraft components, including wing to body fairings, wing panels, flight deck panels, door liners, rotorcraft blades, spars and tip caps
		Engineered Honeycomb		        Aircraft structural sub-components and semi-finished components used in rotorcraft blades, engine nacelles, and aircraft surfaces (flaps, wings, elevators and fairings)
		RF Interference Control		        Military and aerospace applications

 

Net sales for the Engineered Products segment to third-party customers were $314.8 million in 2023, $298.0 million in 2022, and $305.3 million in 2021, which represented approximately 20% of our net sales each year.

The Engineered Products segment has historically included a 50% ownership interest in a Malaysian joint venture, Aerospace Composites Malaysia Sdn. Bhd. (“ACM”) with Boeing Worldwide Operations Limited. Hexcel historically purchased certain semi-finished composite components from the joint venture and performed inspection and additional assembly work prior to direct delivery to Boeing production lines. As part of Boeing's supply chain optimization, this assembly work was transferred overseas in stages in 2020 and 2021 to other parts of the Boeing supply chain, including ACM. Effective January 1, 2022, all of this work was transferred, and Hexcel no longer purchases semi-finished components from ACM. Under the ACM joint venture structure, 50% of ACM net income accrued to Hexcel. In December 2023, Hexcel sold its 50% interest in ACM to Boeing and received net proceeds of $44.7 million.

The following table identifies the key customers and the major manufacturing facilities of the Engineered Products segment:

6

---

 

ENGINEERED PRODUCTS
KEY CUSTOMERS		MANUFACTURING FACILITIES
The Boeing Company		Amesbury, Massachusetts
Bell (1)		Burlington, Washington
CTRM Aero Composites		Casablanca, Morocco
General Dynamics		Kent, Washington
General Electric		Pottsville, Pennsylvania
GKN		South Windsor, Connecticut
Lockheed Martin		Welkenraedt, Belgium
Sikorsky (2)
Spirit Aerosystems
RTX

(1) A Textron Company

(2) A Lockheed Martin Company

Significant Customers

Approximately 39%, 38% and 33% of our 2023, 2022 and 2021 net sales, respectively, were to Airbus and its subcontractors. Of the 39% of overall sales to Airbus and its subcontractors in 2023, 35% related to Commercial Aerospace market applications and 4% related to Space & Defense market applications. Approximately 15%, 14% and 16% of our 2023, 2022 and 2021 net sales, respectively, were to Boeing and its subcontractors. Of the 15% of overall sales to Boeing and its subcontractors in 2023, 12% related to Commercial Aerospace market applications and 3% related to Space & Defense market applications.

Markets

Our products are sold for a broad range of end-uses where durability, strength and weight are important factors to our customers. We sell to three different markets: Commercial Aerospace, Space & Defense and Industrial.

Commercial Aerospace

The Commercial Aerospace industry is our largest user of advanced composites. Commercial Aerospace represented 60% of our 2023 net sales. Approximately 79% of these revenues can be identified as sales to Airbus, Boeing, and their subcontractors for the production of commercial aircraft. Approximately 21% of these revenues were for business jets and regional and other commercial aircraft. The economic benefits to airlines from weight savings in both fuel economy and aircraft range, combined with the design enhancement that comes from the advantages of advanced composites over traditional materials, have resulted in the aerospace industry becoming the leader in the adoption and use of these materials. While military aircraft and spacecraft have led the development and adoption of these materials, Commercial Aerospace has greater production volumes and has commercialized the use of these products. Accordingly, the demand for advanced composites structural material products is closely correlated to the demand for new commercial aircraft.

The use of advanced composites in Commercial Aerospace is primarily in the manufacture of new commercial aircraft and jet engines. These composite materials are designed to last the life of the aircraft and engine so as a result, the aftermarket for these products is minimal. The demand for new commercial aircraft is driven by two principal factors, the first of which is airline passenger traffic (the number of revenue passenger miles flown by the airlines) which affects the required size of airline fleets. Growth in passenger traffic requires growth in the size of the fleet of commercial aircraft operated by airlines worldwide.

A second factor, which is less sensitive to the general economy, is the replacement rates for existing aircraft. The rates of retirement of passenger and freight aircraft, resulting mainly from obsolescence, are determined in part by the regulatory requirements established by various civil aviation authorities worldwide as well as public concern regarding aircraft age, safety, noise, and emissions. These rates may also be affected by the desire of the various airlines to improve operating costs with higher payloads and more fuel-efficient aircraft (which in turn is influenced by the price of fuel) and by reducing maintenance expense. In addition, pressure is increasing on airlines to replace their aging fleet with more fuel efficient and quieter aircraft to be more environmentally responsible. For example, aircraft operators subject to the European Union Emissions Trading Scheme (EU-ETS) are facing significantly higher costs to purchase carbon credits for compliance compared to the cost a few years ago, which may influence fleet replacement plans to purchase lightweight new aircraft. Additionally, the International Civil Aviation Organization (ICAO) Carbon Offsetting and Reduction Scheme for International Aviation (CORSIA) emission reduction mandates for international aviation become mandatory later this decade, which may influence fleet renewal in the coming years. When aircraft are retired from commercial airline fleets, they may be converted to cargo freight aircraft, used for parts, or scrapped.

7

---

 

An additional factor that may cause airlines to defer or cancel orders is their ability to obtain financing, including leasing, for new aircraft orders. This will be dependent both upon the financial health of the airline operators, as well as the overall availability of financing in the marketplace.

Each new generation of commercial aircraft has used increasing quantities of advanced composites, replacing metals and other materials. This follows the trend previously witnessed in military applications where composites now comprise the majority of the airframe of latest generation aircraft to enhance performance, range and payload, including the F-35 Lightning and the CH-53K heavy lift transport helicopter. Early versions of commercial jet aircraft, such as the Boeing 707, which was developed in the early 1950s, contained almost no composite materials. One of the first commercial aircraft to use a meaningful amount of composite materials, the Boeing 767 entered into service in 1983, and contains approximately 6% composite materials, primarily comprised of interior secondary composite structures. Boeing’s legacy 777 aircraft, which entered service in 1995, is approximately 11% composite including composite flaps/ailerons and landing gear doors. The Airbus A380, which was first delivered in 2007, has approximately 23% composite content by weight as the tail structure was built of composites. The Boeing 777X was redesigned with composite wings and a new composite-rich engine and is more than 30% composites. Boeing’s 787, which entered into service in 2011, has a content of more than 50% composite materials by weight including composite wings and fuselage. The Airbus A350 XWB (“A350”) which has a composite content of 53% by weight was first delivered in December 2014.

Engines and nacelles are also an attractive market for both Hexcel Composite Materials and Engineered Products, including composite fan blades, cowlings, and nacelles. Both Airbus and Boeing introduced updated versions of their narrow body aircraft which utilize composite-rich engines and nacelles but continue to incorporate metal wings and fuselages that were designed decades ago. The Airbus A320neo had its first customer delivery in 2016 and the Boeing 737 MAX entered into service in 2017. The LEAP engines and nacelles on both the A320neo and 737 MAX are composite-rich as is the GE9X engine on the Boeing 777X.

It is expected that future aircraft platforms will offer more opportunities for composite materials than their predecessors, as the Commercial Aerospace industry continues to utilize a greater proportion of advanced composite materials with each new generation of aircraft and each new generation of engines and nacelles. We refer to this steady expansion of the use of composites in aircraft as the “secular penetration of composites” as it potentially increases our average sales per airplane over time.

The impact on Hexcel of Airbus and Boeing production rate changes is typically influenced by two factors: the mix of aircraft produced and the inventory supply chain effects of increases or reductions in aircraft production. We have products on all Airbus and Boeing planes. The shipset or dollar value of our materials varies by aircraft type and aircraft platform. Newer designed aircraft use more of our materials than older generations, and as a materials provider, larger aircraft use more composites by weight than smaller aircraft. On average, for established programs, we deliver products into the supply chain about four to six months prior to aircraft delivery, with a range between one and eighteen months depending on the product and specific aircraft platform. For aircraft that are in the development or ramp-up stage we will have sales as much as several years in advance of the aircraft entry-into-service.

 

Airbus and Boeing combined backlog at December 31, 2023 was 14,814 aircraft, or a 16.9% increase compared to December 31, 2022. Airbus and Boeing began increasing production rates in 2022 for select aircraft platforms as air travel recovers and demand for latest-generation fuel efficient aircraft increases. As supply chains recover, disruptions with obtaining and training labor and constraints on receiving raw materials across the aerospace supply chain have tempered the near-term growth in aircraft production rates, leading to higher backlogs. The balance of our Other Commercial Aerospace sales is related to business jets and regional aircraft manufacture, and other commercial aircraft applications. These applications also exhibit increasing utilization of composite materials with each new generation of aircraft, such as the composite wing on the large-cabin Falcon 10X business jet that Dassault announced in 2022.

Space & Defense

The Space & Defense market represented 30% of our 2023 net sales. The Space & Defense market has historically been an innovator in the use of, and source of significant demand for, advanced composites. The aggregate demand by Space & Defense customers is primarily a function of procurement of military aircraft that utilize advanced composites, primarily by the United States and certain Western European governments, including both commercial and military rotorcraft. We are qualified to supply materials to a broad range of military aircraft, commercial helicopter and space programs, including the Lockheed Martin F-35 (Lightning), Sikorsky CH-53K (King Stallion), Bell-Boeing V-22 (Osprey) tilt rotor aircraft, Sikorsky UH-60 Black Hawk, Dassault Rafale and Airbus A400M military transport. The F-35, which is our largest program, represents less than 25% of revenues in this market. No other program accounts for more than 10% of our revenues in this market. The sales from these programs are dependent upon government funding. Space applications for advanced composites include solid rocket booster cases, fairings and payload doors for both government funded and commercial launch vehicles, and satellite buss and solar arrays for military and commercial satellites.

8

---

 

Another growth generating trend for Hexcel is the further penetration of composites in rotorcraft blades, including both new and replacement blades. The UH-60 wide chord blade program and blades for the V-22 were the two largest blade programs in 2023 and 2022. CH-53K is a future growth program, including the composite helicopter blades and new helicopter programs in development which use Hexcel composites in prototypes. The blades include Composite Materials products such as carbon fiber, prepregs, and honeycomb core to improve blade performance. In addition, our Engineered Products segment provides specialty value added services such as machining, sub-assembly, and even full blade manufacturing for rotorcraft.

Industrial

The Industrial market represented 10% of our 2023 net sales. The revenue from this market includes automotive, a wide variety of recreational products, consumer electronics, marine, wind turbine blades and other industrial applications. A number of these applications represent emerging opportunities for our products. In developing new applications, we seek those opportunities where advanced composites technology offers significant benefits to the end user, often applications that demand high engineering performance. This includes carbon fiber and resin formulations that we produce as well as glass fiber we purchase from third parties that we then combine with our resin formulations and weaving expertise. Within the Industrial market, automotive is the largest submarket with sales to high-end performance vehicles. The Industrial market also includes sales to major end user sub-markets, in order of size based on our 2023 sales: general industrial applications (including those sold through distributors), transportation (e.g., automobiles, mass transit and high-speed rail, and marine applications) and consumer electronics, wind energy, and recreational equipment (e.g., skis and snowboards, bicycles and hockey sticks). Historically, wind energy comprised the largest submarket within industrial as we purchase third-party glass fiber and add value with our weaving expertise and resin formulations. The financial returns on new wind energy business became unattractive to the Company as the global wind industry works through a period of turmoil in terms of inflationary cost impacts, logistics challenges, permitting delays, and stiff competition amongst multiple wind turbine manufacturers globally. We continue to produce material for wind blades at our European facility under existing contracts for a number of legacy turbines. Our participation in Industrial applications complements our commercial and military aerospace businesses, and in many instances, technology or products now used in aerospace were started in Industrial. In response to changing market dynamics, we are committed to pursuing the utilization of advanced structural material technology and introducing new innovations to support our customers where it can generate significant value and we can maintain a sustainable competitive advantage.

Further discussion of our markets, including certain risks, uncertainties, and other factors with respect to “forward-looking statements” about those markets, is contained under the captions “Management’s Discussion and Analysis of Financial Condition and Results of Operations, “Forward Looking Statements” and “Risk Factors.”

Backlog

In recent years, our customers have demanded shorter order lead times and “just-in-time” delivery performance. While we have many multi-year contracts with our major aerospace customers and our largest Industrial customer, most of these contracts specify the proportion of the customers’ requirements that will be supplied by us and the terms under which the sales will occur, not the specific quantities to be procured or the specific dates for delivery. Our Industrial customers have always desired to order their requirements on as short a lead-time as possible. As a result, twelve-month order backlog is not a meaningful trend indicator for us.

Raw Materials and Production Activities

Our manufacturing operations are in many cases vertically integrated. One example of the benefits of our vertical integration is that it enables us to control both the carbon fiber surface structure and resin formulations to optimize their interaction and ensure excellent interfacial adhesion or bonding. We produce and internally use carbon fibers, industrial fabrics, composite materials, and composite structures as well as sell these materials to third-party customers for their use in the manufacture of their products.

We manufacture high performance carbon fiber from polyacrylonitrile precursor (“PAN”). The primary raw material for PAN is acrylonitrile. All of the PAN we produce is for internal carbon fiber production. We utilized between 60% and 65% by value of the carbon fiber we produced in 2023 and between 65% and 70% in 2022 with the remainder of our output sold to third-party customers. However, as one of the world’s largest consumers of high-performance carbon fiber, we also purchase significant quantities of carbon fiber from external sources for our own use. The sources of carbon fiber we can use in any product or application are generally dictated by customer qualifications or certifications. Otherwise, we select a carbon fiber based on performance, price, and availability. With the increasing demand for carbon fiber, particularly in aerospace applications, in recent years we increased our PAN and carbon fiber capacity to serve the growing needs of our customers and our own downstream products. After a new production line starts operating, it can take up to a year to be certified for aerospace applications. However, these lines can start supplying carbon fiber for many industrial applications within a shorter time period.

 

9

---

 

In early 2023, we announced that we resumed construction of a new carbon fiber line in Decatur, AL. We had previously paused construction on this line in early 2020. This carbon fiber line is expected to be qualified to produce carbon fiber for aerospace markets in late 2025 or early 2026. Additionally, we completed the expansion of our Engineered Products facility in Casablanca, Morocco as we doubled the size of the facility to meet growing demand.

We formulate a variety of resin systems that are tailored to specific applications and support the process for manufacturing composite parts. The type of epoxy and curative used in the resin systems vary depending on the application being considered, including the required service temperature, mechanical performance, and rate of cure. We continually focus on innovation that will help our customers reduce their cycle time and increase their production through-put, including lower curing temperatures, faster curing times, and enhancing the flow characteristics of the resin formulations, particularly for infusion manufacturing processes.

We purchase glass yarn for our aerospace and industrial markets from a number of suppliers in the United States, Europe and Asia. We also purchase aramid and high strength fibers which are produced by only a few companies, and during periods of high demand, can be in short supply. In addition, epoxy and other specialty resins, aramid paper and aluminum specialty foils are used in the manufacture of composite products. A number of these products have only one or two sources qualified for use, so an interruption in their supply could disrupt our ability to meet our customer requirements. When entering into multi-year contracts with aerospace customers, we attempt to get back-to-back commitments from key raw material suppliers. While we are not dependent on any one supplier for the majority of our raw materials, we are highly dependent on our suppliers in order to meet commitments to our customers. We continue to work closely with our key suppliers to ensure that we are able to meet our customer commitments. While we have not experienced materially significant issues in the purchase of key raw materials, we continue to monitor the availability (including transportation) and price of raw materials on a regular basis, as well as any potential impact on our operations.

Our manufacturing activities are primarily based on “make-to-order”, or “demand pull” based on customer schedules, and to a lesser extent, “make-to-forecast” production requirements. We coordinate closely with key suppliers in an effort to avoid raw material shortages and excess inventories. However, many of the key raw materials we consume are available from relatively few sources, and in many cases the cost of product qualification makes it impractical to develop multiple sources of supply. The lack of availability of these materials could under certain circumstances have a material adverse effect on our consolidated results of operations.

Research and Technology: Patents and Know-How

We maintain seven Research and Technology (“R&T”) Centers of Excellence to support our businesses worldwide, including in the U.S., France and the United Kingdom. Through R&T activities, we maintain expertise in precursor and carbon fiber, chemical and polymer formulation and curatives, fabric forming and textile architectures, advanced composite structures, process engineering, application development, analysis and testing of composite materials, computational design, and other scientific disciplines related to our worldwide business base.

In early 2023, we completed the construction of our newest and largest R&T Center of Excellence in Salt Lake City, Utah which supports next-generation composite technology development across our business including applications for the Commercial Aerospace, Space & Defense and Industrial markets. The 100,000 square foot facility is adjacent to our existing carbon fiber and prepreg manufacturing operations in Salt Lake City.

Our products rely primarily on our expertise in materials science, textiles, process engineering and polymer chemistry. Consistent with market demand, we have been placing more emphasis on higher performing products and cost-effective production processes while seeking continually to improve the consistency of our products and our capital efficiency. Towards this end, we have entered into formal and informal alliances, as well as licensing and teaming arrangements, with several customers, suppliers, external agencies, universities and laboratories. We believe that we possess unique capabilities to design, develop, manufacture, and qualify composite materials and structures, including trade secrets and extensive internal knowledge gained from decades of experience. It is our policy to actively enforce our proprietary rights. We believe that the patents and know-how rights currently owned or licensed by Hexcel are adequate for the conduct of our business. We do not believe that our business would be materially affected by the expiration of any single patent or series of related patents, or by the termination of any single license agreement or series of related license agreements.

Environmental Matters

We view climate change as an important social issue that presents some level of risk to our business while also creating opportunities for greater adoption of lightweight advanced composites. Our strategic and operational decision making is influenced by our commitment to reduce the environmental impact of our operations, including our carbon footprint, air and water emissions and waste reduction. We continue to pursue initiatives to improve our emissions profile through operational efficiency improvements that reduce our reliance on fossil fuels and increase our use of renewable power.

10

---

 

We have implemented sustainable energy sourcing within certain sites, as we work with our energy suppliers to increase sources of renewable power and install on-site solar panels at our manufacturing sites in Neumarkt, Austria, Casa Grande, Arizona, and Casablanca, Morocco. The generation of solar power reduces our demand for fossil-fuel powered electricity, which supports our carbon and greenhouse gas emission reduction goals. We also procure renewable power through our energy suppliers and at several sites, through power purchase agreements (PPA). We have applied this same approach to our product life cycle, implementing circular economic principles to reduce waste – both in our manufacturing and product packaging. At this time, we are not subject to carbon emission trading programs at any of our facilities, though we are actively monitoring country and region-specific regulations and trends to ensure pricing and capital expenditures are incorporated into our future product portfolio planning.

 

Governments and agencies worldwide are increasingly proposing and/or implementing legislation, regulations and other requirements resulting in more restrictive air emission limits globally, which could impact our operations. Changes in environmental and climate change laws or regulations, including laws relating to greenhouse gas emissions, could lead to new or additional investment in manufacturing processes or product designs and could increase environmental compliance expenditures, including increased energy, controls and raw materials costs. The increasing global emphasis on emissions reduction supports the adoption of our advanced composite light weighting solutions for transportation applications. We also market composite solutions that reduce aircraft engine noise, which benefits local communities near airports, supports aircraft operators in geographies that are subject to local noise abatement programs, and enables more direct routes for aircraft that save fuel rather than having to fly longer routes to avoid noise-sensitive areas.

We are subject to various International and U.S. federal, state, and local environmental and health and safety laws and regulations. We are also potentially subject to liabilities arising under the Comprehensive Environmental Response, Compensation and Liability Act (“CERCLA” or “Superfund”), the Clean Air Act, the Clean Water Act, the Resource Conservation and Recovery Act, and similar state local and international laws and regulations that impose responsibility for the control, remediation and abatement of air, water and soil pollutants and the manufacturing, storage, handling and disposal of hazardous substances and waste. We believe that our policies, practices, and procedures are properly designed to prevent unreasonable risk of environmental damage and associated financial liability. To date, environmental control regulations have not had a significant adverse effect on our overall operations and nearly 90% of our sites as of December 31, 2023 are ISO14001:2015 certified.

A discussion of environmental matters is contained in Note 16 to the accompanying consolidated financial statements included in this Annual Report on Form 10-K. For further discussion of risks related to environmental and climate matters and other government regulations, see Item 1A, “Risk Factors” in this Annual Report on Form 10-K.

Other Regulatory Matters

As a materials supplier for U.S. prime contractors, and, in some cases, directly to the U.S. government, we are subject to certain U.S. government Federal Acquisition Regulations, the Department of Defense Federal Acquisition Regulations Supplement, and associated procurement regulations. Specifically, we must comply with certain laws and regulations relating to the formation, administration, and performance of U.S. government contracts, including the U.S. government security requirements, such as the National Industrial Security Program Operating Manual and any other applicable U.S. government industrial security regulations, as well as additional government export control laws and regulations. In complying with these laws and regulations, we may be required to make additional capital expenditures and incur other costs. Furthermore, failure to comply may result in the imposition of fines and penalties, including contractual damages, civil penalties, criminal penalties, administrative sanctions, suspension or debarment from contracting with the U.S. government or termination of any applicable facility security clearance, which in turn would preclude us from being awarded classified contracts or, under certain circumstances, performing on our existing classified contracts. The U.S. Government also has the ability to unilaterally terminate existing contracts with us and our U.S. prime customers, reduce the value of such contracts, audit contract-related costs and fees, including allocated indirect costs, and control and potentially prohibit the export of our products, among other things. If a contract supporting the U.S. government was terminated for convenience, we could only seek to recover the costs we have incurred or committed, settlement expenses, and profit on the work completed prior to termination.

As a company with significant international operations, we are also subject to numerous laws and regulations, including export controls and sanctions laws, customs regulations, international treaties and local trade rules around the world. These laws, rules and regulations may impose significant costs of compliance on the Company and may impact our competitiveness through restricting our ability to do business in certain places or with certain entities and individuals. Any failure to comply with trade regulations could limit our ability to conduct business internationally.

11

---

 

Sales and Marketing

A staff of salaried marketing managers, product managers and sales personnel sell and market our products directly to customers worldwide. We also use independent authorized distributors for certain products, markets, and regions. In addition, we operate various sales representation offices globally.

Competition

In the production and sale of advanced composites, we compete with a number of U.S. and international companies on a worldwide basis. The broad markets for composites are highly competitive, and we have focused on both specific sub-markets and specialty products within markets. In addition to competing directly with companies offering similar products, we compete with producers of substitutes for composites such as metal, structural foam, and wood. Depending upon the material and markets, relevant competitive factors include technology, product performance, historical database of usage, delivery, service, price, customer preference for sole sourcing and customer preferred processes.

 

We believe that new competitors face significant barriers to entry into many of our markets. These barriers include the intellectual property and unique skills and expertise to design and manufacture carbon fiber and to formulate resin systems for aerospace applications, an extensive database of qualification and performance measurements of our products, the advantages of scale derived from significant global manufacturing capacity for aerospace-grade carbon fiber, and long-term customer relationships developed over decades of designing, manufacturing and working closely with our customers on composite applications. Further, the aerospace industry has rigorous product certification requirements and quality programs including one hundred percent traceability of all raw material and finished goods, and high expectations for consistent on-time delivery, which all act as barriers to entry.

Human Capital

We believe our success depends on the skills, experience, and industry knowledge of our key talent. As such, our management team places significant focus and attention on the attraction, development, and retention of employees, as well as ensuring our corporate culture reflects our values, and our board of directors provides oversight for various employee initiatives. Our Hexcel values guide our actions, reflect our culture, and drive our performance, as explained in our Code of Business Conduct posted on our website at www.hexcel.com. We have made and continue to make significant investments in training and professional development, and we have well-established performance management and talent development processes that encourage employees to aspire to different career opportunities and for our managers to provide regular feedback and coaching to develop employees.

The health and safety of our employees is a continual focus and a top priority. Our initiatives and actions to reduce injuries and illnesses have led to significant improvements to our safety performance over time. We have attained these improvements by fostering a global safety culture supported with regular training and education that includes robust systems and philosophies centered on personal responsibility and accountability. There is a high-level of leadership engagement, ensuring risks are assessed, robust procedures and guidance are available with worker training, mitigation is managed through the hierarchy of management controls, and appropriate safety equipment is installed and operational at all of our manufacturing sites worldwide. We also have leading indicators in place to prevent safety events, and rigorous reviews of root causation and systemic corrective actions when safety incidents do occur. Hexcel achieved corporate umbrella certification for both ISO14001:2015 and ISO 45001:2018 in 2019. Attaining both certifications against world renowned management system standards reflects the commitment of senior Hexcel leadership to drive continuous improvement in our environmental, health and safety processes, by focusing on the reduction of injuries and illnesses and the impact of our operations on the environment, ensuring conformance to our numerous compliance obligations, and demonstrating sustainability as a valued supplier.

An engaged, innovative, skilled, and collaborative workforce is critical to our continued leadership in the advanced composites industry. We operate globally under policies and programs that provide competitive wages, benefits, and terms of employment. We are committed to efforts to increase diversity and foster an inclusive work environment that supports our global workforce through recruiting efforts, equitable compensation policies, and educational workshops to promote a positive and collaborative culture. Our diversity recruitment efforts include targeted university recruitment and attendance at conferences promoting racial and gender diversity in engineering, which have historically been a major source of candidates for our summer internship program and Early Career Program for new hires.

Employee levels are managed to align with business demand and, while we have experienced and continue to expect tight labor markets, management believes it currently has sufficient human capital to operate our business successfully. As of December 31, 2023, we employed 5,590 full-time employees and contract workers: 2,936 in the United States and 2,654 in other countries. We employ a minimal number of contract workers. Approximately 30% of employees in the United States and the majority of those in Europe are represented by unions or works’ councils. We believe that our relations with employees, unions and works’ councils are good.

12

---

 

The total number of full-time employees and contract workers as of December 31, 2022 and 2021 was 5,328 and 4,863, respectively.

Other Information

Our internet website is www.hexcel.com. Information contained on or accessible through, including any reports available on, our website is not a part of, and is not incorporated by reference into, this Annual Report on Form 10-K or any other report or document we file with the Securities and Exchange Commission (“SEC”). Any reference to our website in this Annual Report on Form 10-K is intended to be an inactive textual reference only. We make available, free of charge through our website, our Form 10-Ks, 10-Qs and 8-Ks, and any amendments to these forms, as soon as reasonably practicable after filing with, or furnishing to, the SEC.

Forward-Looking Statements

This report contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. These statements relate to analyses and other information that are based on forecasts of future results and estimates of amounts not yet determinable. These statements also relate to future prospects, developments and business strategies. These forward-looking statements are identified by their use of terms and phrases such as “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “intend,” “may,” “plan,” “potential,” “predict,” “project,” “should,” “seek,” “target,” “would,” “will” and similar terms and phrases, including references to assumptions. Such statements are based on current expectations, are inherently uncertain and are subject to changing assumptions. No assurance can be given that any commitment, plan, initiative, projection, goal, expectation, or prospect set forth in this Annual Report on Form 10-K can or will be achieved. Inclusion of information in this Annual Report on Form 10-K is not an indication that the subject or information is material to our business or operating results

 

Such forward-looking statements include, but are not limited to: (a) the estimates and expectations based on aircraft production rates provided by Airbus, Boeing and others and the revenues we may generate from an aircraft model or program; (b) expectations with regard to the impact of regulatory activity related to the Boeing 737 MAX or Boeing 787 on our revenues; (c) expectations with regard to raw material cost and availability; (d) expectations of composite content on new commercial aircraft programs and our share of those requirements; (e) expectations regarding revenues from space and defense applications, including whether certain programs might be curtailed or discontinued; (f) expectations regarding sales for industrial applications; (g) expectations regarding cash generation, working capital trends, and inventory levels; (h) expectations as to the level of capital expenditures, capacity, including the timing of completion of capacity expansions, and qualification of new products; (i) expectations regarding our ability to improve or maintain margins; (j) expectations regarding our ability to attract, motivate, and retain the workforce necessary to execute our business strategy; (k) projections regarding our tax rate; (l) expectations with regard to the continued impact of macroeconomic factors or geopolitical issues or conflicts; (m) expectations regarding our strategic initiatives, including our sustainability goals; (n) expectations with regard to the effectiveness of cybersecurity measures; (o) expectations regarding the outcome of legal matters or the impact of changes in laws or regulations; and (p) our expectations of financial results for 2024 and beyond.

 

Such forward-looking statements involve known and unknown risks, uncertainties and other factors, some of which are beyond our control, that may cause actual results to be materially different. Such factors include, but are not limited to, the following: the extent of the impact of macroeconomic factors or geopolitical issues or conflicts; reductions in sales to any significant customers, particularly Airbus or Boeing, including related to regulatory activity or public scrutiny impacting the Boeing 737 MAX or the Boeing 787; our ability to effectively adjust production and inventory levels to align with customer demand; our ability to effectively motivate, retain and hire the necessary workforce; the availability and cost of raw materials, including the impact of supply shortages and disruptions and inflation; our ability to successfully implement or realize our strategic initiatives, including our sustainability goals and any restructuring or alignment activities in which we may engage; changes in sales mix; changes in current pricing due to cost levels; changes in aerospace delivery rates; changes in government defense procurement budgets; timely new product development or introduction; our ability to install, staff and qualify necessary capacity or complete capacity expansions to meet customer demand; cybersecurity-related risks, including the potential impact of breaches or intrusions; currency exchange rate fluctuations; changes in political, social and economic conditions, including the effect of change in global trade policies, such as sanctions; work stoppages or other labor disruptions; our ability to successfully complete any strategic acquisitions, investments or dispositions; compliance with environmental, health, safety and other related laws and regulations, including those related to climate change; the effects of natural disasters or other severe weather events, which may be worsened by the impact of climate change, and other severe catastrophic events, including any public health crisis; and the unexpected outcome of legal matters or impact of changes in laws or regulations.

 

Although we believe that these forward-looking statements are based on reasonable assumptions, you should be aware that many factors could affect our actual results of operations and could cause actual results to differ materially from those expressed in the forward-looking statements. As a result, the foregoing factors should not be construed as exhaustive and should be read together with other cautionary statements included in this and other reports we file with the SEC. For additional information regarding certain factors that may cause our actual results to differ from those expected or anticipated, see the information under the caption “Risk Factors,” which is located in Item 1A of Part I of this report.

13

---

 

We do not undertake any obligation to update our forward-looking statements or risk factors to reflect future events or circumstances, except as otherwise required by law.

 

ITEM 1A. Risk Factors

You should carefully consider the following risk factors and all other information contained in this Annual Report on Form 10-K and the documents we incorporate by reference in this Annual Report on Form 10-K. Any of the following risks could materially and adversely affect our business, financial condition, results of operations and cash flows. While we believe we have identified and discussed below the material risks affecting our business, there may be additional risks and uncertainties that we do not presently know or that we do not currently believe to be material that may adversely affect our business, financial condition, results of operations or cash flows in the future, and may require significant management time and attention. You should not interpret the disclosure of any risk factor to imply that the risk has not already materialized.

Risks Related to Our Strategy

The markets in which we operate can be cyclical, and downturns in them may adversely affect the results of our operations.

Some of the markets in which we operate have been, to varying degrees, cyclical and have experienced downturns. A downturn in these markets could occur at any time as a result of events that are industry specific, such as aircraft production slowdown resulting from the impact of a public health crisis on air travel, the grounding, regulatory scrutiny and/or suspension or discontinuation of aircraft in which our products are used, or other macroeconomic events, such as geopolitical conditions, global conflict, political unrest or terrorist attacks, or an economic downturn or recession. Any deterioration in any of the cyclical markets we serve could adversely affect our financial performance and operating results.

During both 2020 and 2021, due to the impact of the COVID-19 pandemic on Commercial Aerospace, we experienced a material decrease in demand, resulting in order cancellations and deferrals from our Commercial Aerospace customers, which resulted in decreased sales for our Commercial Aerospace products and reduced operating income for the years ended December 31, 2021 and 2020. To the extent there are significant deferrals, cancellations, or reductions in demand that result in decreased aircraft build rates, it would have a negative impact on sales for our Commercial Aerospace products and as a result reduce our operating income. Approximately 60% of our sales for 2023 were derived from sales to the Commercial Aerospace industry. Reductions in demand for commercial aircraft or a delay in deliveries could result from many factors, including delays in the startup or ramp-up of new programs, suspension or discontinuation of current commercial aircraft programs, changes in the propensity for the general public to travel by air (including as a result of terrorist events and any subsequent military response, a public health crisis or a global conflict), a significant change in the cost of aviation fuel, a change in technology resulting in the use of alternative materials, environmental concerns (including climate change), consolidation and liquidation of airlines, availability of funding for new aircraft purchases or leases, inventory corrections or disruptions throughout the supply chain and slower macroeconomic growth.

At different times, both Airbus and Boeing have experienced various delays in the start and ramp up of several aircraft programs. In the past, these have delayed our expected growth, or our effective utilization of capacity installed for such growth. Future delays, or production cuts arising from the impact of macroeconomic events, geopolitical conditions, global conflict or supply chain and labor disruptions, in these or other major new customer programs could similarly impact our results.

In addition, our customers continue to emphasize the need for cost reduction or other improvements in contract terms throughout the supply chain. In response to these pressures, we may be required to accept increased risk or face the prospects of margin compression on some products in the future. Where possible, we seek to offset or mitigate the impact of such pressures through productivity and performance improvements, cost index contractual provisions, hedging and other actions, which may not be successful.

A significant decline in business with Airbus, Boeing, or other significant customers could materially impact our business, operating results, prospects, and financial condition.

We have concentrated customers in the Commercial Aerospace and the Space & Defense markets. In the Commercial Aerospace market, approximately 79%, and in the Space & Defense market, approximately 20%, of our 2023 sales were made to Airbus and Boeing and their related subcontractors. For the years ended December 31, 2023 and December 31, 2022, approximately 39% and 38% of our total consolidated sales, respectively, were to Airbus, and its related subcontractors and approximately 15% and 14% of our total consolidated sales, respectively, were to Boeing and its related subcontractors. Significant changes in the demand for our customers’ end products, program delays, the share of their requirements that is awarded to us or changes in the design or materials used to construct their products could result in a significant loss of business with these customers. The loss of, or significant reduction in, purchases by Airbus or Boeing or any of our other significant customers could materially impair our business, operating results, prospects and financial condition.

14

---

 

The level of purchases and product mix demanded by our customers is often affected by events beyond their control, including general economic conditions, demand for their products, conditions in the airline industry, regulatory scrutiny and/or suspension or discontinuation of aircraft, disruptions in deliveries, business disruptions, strikes and other factors, which could have a material adverse effect on our business, financial condition, results of operations, and cash flows.

Reductions in space and defense spending could result in a decline in our sales.

Space and defense production that has occurred in recent years may not be sustained, individual programs important to Hexcel may be cancelled, production may not continue to grow or may decrease and the increased demand for composite-intensive programs may not continue. In addition, the production of military aircraft depends upon defense budgets and the related demand for defense and related equipment. Approximately 30% of our sales in 2023 were to the Space & Defense market, of which approximately 80% were related to military programs in the United States and other countries. In addition to normal business risks, our indirect supply of products to the U.S. government is subject to unique risks largely beyond our control. The level of U.S. defense spending is hard to predict, and U.S. Department of Defense budgets could be negatively impacted by several factors, including, but not limited to, a change in defense spending policy as a result of the current political environment or otherwise, military aid to countries experiencing global conflict, the U.S. government’s budget deficits or breach of the debt ceiling, other spending priorities, increased defense regulatory requirements resulting in additional expenses, the cost of sustaining the U.S. military presence internationally, potential political pressure to reduce military spending and future potential government shutdowns, each of which could cause the U.S. Department of Defense budget to remain unchanged or to decline.

If we fail to comply with government procurement laws and regulations, including those related to information security, we could lose business and be liable for various penalties or sanctions.

We must comply with laws and regulations relating to the formation, administration, and performance of U.S. government contracts, including government security requirements and additional government export control laws and regulations, as well as certain cybersecurity certifications and other cybersecurity requirements. These regulations and other requirements regularly evolve, and new laws, regulations or procurement requirements or changes to current ones (including, for example, regulations related to cybersecurity, privacy, information classification and protection, greenhouse gas emissions and climate risk, cost accounting, recovery of employee compensation costs, counterfeit parts, pensions, anti-human trafficking, specialty metals, conflict minerals and use of certain non-U.S. equipment and materials) could significantly increase our costs and risks and reduce our profitability. In complying with these laws and regulations, we may incur significant costs, and non-compliance may result in the imposition of fines and penalties, including contractual damages. If we fail to comply with these laws and regulations or if a government audit, review, or investigation uncovers improper or illegal activities, we may be subject to civil penalties, criminal penalties, or administrative sanctions or suspension or debarment from contracting with the U.S. government. In addition, failure to follow the requirements of the National Industrial Security Program Operating Manual or any other applicable U.S. government industrial security regulations could, among other things, result in termination of any facility security clearance, which in turn would preclude us from being awarded classified contracts or, under certain circumstances, performing on our existing classified contracts.

 

If we are unable to develop new products on a timely basis, it could adversely affect our business and prospects.

We believe that our future success depends, in part, on our ability to develop, on a timely basis, technologically advanced products that meet or exceed current industry standards, including developing products with an improved environmental footprint that continue to contribute to the environmental sustainability goals of our customers. Although we believe we have certain technological and other advantages over our competitors, maintaining such advantages will require us to continue investing in research and development and sales and marketing. There can be no assurance that we will be able to make the technological advances necessary to maintain such competitive advantages or that we can recover major research and development expenses.

Acquisitions, divestitures, mergers, business combinations or joint ventures may entail certain operational and financial risks.

Over the past several years, we have completed strategic acquisitions of complementary manufacturing companies, as well as strategic investments in companies and divestitures of certain interests. We expect to continue to explore complementary mergers, acquisitions, investments and joint ventures and may also pursue additional divestures or closures of business lines or investments that do not fit with our core strategy. We may also engage in further vertical integration and business restructuring. We may face competition for attractive targets and may not be able to acquire potential targets on terms or at prices acceptable to us, if at all. In addition, these types of transactions may require significant liquidity, which may not be available on terms favorable to us, or at all.

We cannot provide any assurance that we will realize the intended benefits from any such transactions. The process of integrating acquired businesses into our existing operations may result in unforeseen operating difficulties and may require additional financial resources and attention from management that would otherwise be available for the ongoing development or expansion of our existing operations. Even if successfully integrated, the acquired business may not achieve the results we expect or produce expected benefits in the time frame planned. In addition, we may not be able to successfully complete any strategic divestures in a timely manner, or at all.

15

---

 

Risks Related to Our Operations

The global macroeconomic environment could negatively impact our business and our financial position, results of operations and/or cash flows could be materially adversely affected.

Our business, financial position, results of operations and cash flows have been and may continue to be adversely impacted by the global macroeconomic environment, which has experienced, and continues to experience, extraordinary challenges, including high rates of inflation; increasing interest rates; widespread disruptions in supply chains; workforce challenges, including labor shortages; and market volatility. These challenges have, among other things, led to increased costs, labor and supply shortages, and transportation and performance delays and disruptions and have adversely affected us, our industry, our customers and suppliers and others with whom we do business. We (including our suppliers and other partners) have and may continue to experience inflationary pressures, supply chain disruption and labor, material and transportation cost increases at a rate higher than anticipated. Given the nature of our business and our contracts (many of which are fixed price and of long duration), we may be unable to recover some of these increased costs or to offset such costs with greater than expected efficiencies. While some aspects of the macroeconomic environment appear to be improving, and we have been able to mitigate some of the challenges, other challenges persist. We cannot predict how long these challenges will persist or how they will change over time, or how the macroeconomic environment will evolve and continue to impact us. While we continue to work proactively to mitigate these challenges, if we are unable to do so successfully, our financial position, results of operations and/or cash flows could be materially adversely affected.

 

Our results of operations would be adversely affected by a shortage of trained personnel or work stoppages, and may be adversely affected by increasing labor costs.

 

Our business has historically been dependent on a highly trained workforce because of the complex nature of our products. As of December 31, 2023, approximately 30% of employees in the United States were unionized and the majority in Europe were represented by a works council. We periodically need to renegotiate our collective bargaining and works council agreements, and any failure to negotiate new agreements or extensions in a timely manner could result in work stoppages or slowdowns. Our ability to hire, train, assimilate and retain a qualified workforce has also been impacted by the ongoing labor market disruptions. If we are unable to hire and retain a sufficient number of trained personnel, or we experience a significant or prolonged work stoppage in such an environment, including due to salary negotiation challenges with employees covered by collective bargaining or works council agreements, our ability to secure new business and our results of operations and financial condition could be adversely affected. In 2022 and 2023, in addition to labor shortages, we also experienced increases in labor costs in the countries in which we operate due to rising inflation rates and localized labor market disruptions. Further increases in labor costs could significantly reduce our profit margins if we are unable to flow such costs through to our customers.

Our ability to attract, retain and motivate key employees is vital to our success.

Our success, competitiveness and ability to execute on our global strategies and maintain a culture of innovation depend in large part on our ability to attract, retain and motivate qualified employees and leaders with expertise and capabilities, representing diverse backgrounds and experiences. Achieving this objective may be difficult due to many factors, including fluctuations in global economic and industry conditions, such as the impact of inflation, management changes, increasing local and global competition for talent, particularly due to the increase in remote working opportunities, the availability of qualified employees, restructuring and alignment activities (including workforce reductions), and the attractiveness of our compensation and benefit programs. If we are unable to attract, retain and motivate qualified employees and leaders, we may be unable to fully capitalize on current and new market opportunities, which could adversely impact our business and results of operations. The loss or retirement of employees presents particular challenges to the extent they involve the departure of knowledgeable and experienced employees and the resulting need to identify and train existing or new candidates to perform necessary functions, and ineffective succession planning could result in unexpected costs, reduced productivity, and/or difficulties with respect to internal processes and controls. There is also the risk that we are unable to achieve our diversity, equity and inclusion objectives or, more broadly, to meet diversity or other sustainability goals increasingly required by our stockholders, customers, employees and other stakeholders. If we are unable to attract and retain a qualified and diverse workforce, we may be unable to maintain our competitive position and our future success could be materially adversely affected.

We have engaged in restructuring and alignment activities from time to time and there can be no assurance that our efforts will have the intended effects.

From time to time, we have responded to changes in our industry and the markets we serve, or other changes in our business, by restructuring or aligning our operations, including the closure of our Windsor, Colorado and Tianjin, China wind energy prepreg production facilities in 2020 and 2022, respectively, and the movement of our Research and Technology Center from Dublin, California to Salt Lake City, Utah. Due to necessary cost reduction measures or changes in the industry and markets in which we compete, we may decide to implement additional restructuring or alignment activities in the future, such as closing plants, idling certain equipment or operations, or making additions, reductions or other changes to our management or workforce.

16

---

 

These restructuring and/or alignment activities generally result in charges and expenditures that may adversely affect our financial results for one or more periods. Restructuring and/or alignment activities can also create unanticipated consequences, such as instability or distraction among our workforce, and we cannot provide any assurance that any restructuring or alignment efforts that we undertake will result in the intended benefits. A variety of risks could cause us not to realize expected cost savings, including, among others: (a) higher than expected severance costs related to headcount reductions; (b) higher than expected costs of closing plants; (c) incurring costs to hire new employees or delays or difficulty hiring the employees needed; and (d) delays in the anticipated timing of activities related to our cost-saving plan. If we are unable to align our operations in light of evolving market conditions, it could have an adverse effect on our business, financial condition, results of operations, and cash flows.

A decrease in supply, interruptions at key facilities or an increase in cost of raw materials could result in a material decline in our profitability.

Our profitability depends largely on the price and continuity of the supply of raw materials, which may be supplied through a sole source or a limited number of sources. We purchase large volumes of raw materials, such as epoxy and phenolic resins, acrylonitrile, carbon fiber, fiberglass yarn, aramid paper and, to a lesser extent, aluminum foil. Any restrictions on supply resulting from geopolitical conditions, extreme weather events, availability of global logistics, increase in the cost of our raw materials including increases resulting from inflation or tariffs, or other unforeseen disruptions in the supply chain could significantly reduce our profit margins. Efforts to mitigate restrictions on the supply or price increases of these raw materials through long-term purchase agreements, productivity improvements, multi-source qualifications, use of alternative materials, hedging or flowing through cost increases to our customers may not be successful. In addition, increasing prices of our products could put such products at a competitive disadvantage. During recent years, as a result of the challenges created by global supply and transportation constraints, ongoing global conflict, the COVID-19 pandemic and market volatility, we experienced supply disruptions and cost increases and anticipate that the risk of supply disruptions and material shortages, as well as cost increases, may continue. While we have not experienced materially significant issues in the purchase of key raw materials, we continue to monitor the availability (including transportation) and price of raw materials on a regular basis, as well as any potential impact on our operations.

The occurrence of material operational problems or interruptions, including, but not limited to, as a result of the failure of key equipment, a quality or financial failure of a sole source or major supplier, the effects of natural disasters or climate change-related events, the impact of any public health crises, ongoing supply chain disruptions and supply shortages, energy disruption caused by ongoing global conflict, the inability to install, staff and/or qualify necessary capacity, political or social unrest, the failure to achieve planned manufacturing improvements or other causes, or any other inability to meet customer requirements, may have a material adverse effect on the productivity and profitability of a particular manufacturing facility, and could have a material effect on the Company as a whole.

We have substantial international operations subject to uncertainties that could affect our operating results.

We believe that revenue from sales outside the U.S. will continue to account for a material portion of our total revenue for the foreseeable future. In 2023, 50% of our production and 59% of our customer sales occurred outside of the United States. Additionally, we have invested significant resources in our international operations, and we intend to continue to make such investments in the future. Our business and results of operations are subject to numerous risks of doing business internationally including: (a) general economic, political, legal, social and health conditions unfavorable to our growth strategy, including the impact of rising inflation and other global economic conditions on labor and supply costs and availability, changes in currency exchange rates, geopolitical conditions and global conflicts; (b) longer payment cycles of foreign customers or challenges in enforcing agreements and collecting receivables through certain foreign legal systems; (c) the cost of compliance with international trade laws of all of the countries in which we do business, including export control laws, relating to sales and purchases of goods and equipment and transfers of technology; (d) government actions having a direct or indirect adverse impact on our international business and market opportunities, including, but not limited to, tariffs and other trade restrictions imposed by the United States, China and other jurisdictions; (e) adverse tax consequences, such as fluctuating tax rates, withholding requirements on foreign earnings or limitations on repatriations of earnings; and (f) the potential difficulty in enforcing our intellectual property rights in certain foreign countries, and the potential for the intellectual property rights of others to affect our ability to sell products in certain markets. Any one of these could adversely affect our financial condition and results of operations. With respect to tariffs, implementation of new tariff schemes by various governments, such as those implemented by the United States and China in recent years, could potentially increase the costs of our materials, increase our cost of production, and ultimately increase the landed cost of our products sold from one country into another country. In addition, although we are not experiencing direct material adverse effects on our business resulting from ongoing global conflicts, the global implications, including increased inflation, escalating energy costs, and constrained raw material availability, and thus increasing costs, as well as embargos on flights from certain countries, are impacting the global economy and the aerospace industry in particular.

17

---

 

Fluctuations in currency exchange rates may influence the profitability and cash flows of our business. For example, most of our European operations sell a majority of the products they produce in U.S. dollars, yet the labor and overhead costs and portions of raw material costs incurred in the manufacture of those products are primarily denominated in Euros, British pound sterling or U.S. dollars. As a result, the local currency margins of goods manufactured with costs denominated in local currency, yet sold in U.S. dollars, will vary with fluctuations in currency exchange rates, reducing when the U.S. dollar weakens against the Euro and British pound sterling. In addition, the reported U.S. dollar value of the local currency financial statements of our foreign subsidiaries will vary with fluctuations in currency exchange rates. While we enter into currency hedge agreements in an attempt to mitigate these types of fluctuations, we cannot remove all fluctuations or hedge all exposures, or we may not be successful in hedging our exposure, and our earnings are impacted by changes in currency exchange rates.

We currently do not have political risk insurance in the countries in which we conduct business. While we carefully consider these risks when evaluating our international operations, we cannot provide assurance that we will not be materially adversely affected as a result of such risks.

We could be adversely affected by environmental and safety requirements, as well as legal, regulatory or market measures to address climate change.

Our operations require the handling, use, storage, transport and disposal of certain regulated materials and wastes. As a result, we are subject to various laws and regulations pertaining to pollution and protection of the environment, health, and safety. These requirements govern, among other things, emissions to air, discharge to waters, the generation, handling, storage, transport, treatment and disposal of regulated materials and waste, and remediation of contaminated sites. We have made, and will continue to make, capital and other expenditures in order to comply with these laws and regulations. These laws and regulations are complex, change frequently and could become more stringent in the future.

In some cases, regulatory bodies have decided and may decide in the future to limit or ban certain materials we use in our manufacturing process due to potentially significant health and safety risks to people or the environment. Such limitations or bans have resulted in, and may in the future require us to consider, the use of alternative raw materials or changes to our method of operations. Such alternatives often require customer approval and may result in additional costs, including higher raw material expenses, changes in operational methods, and additional customer qualifications. The formulation changes could also impact the utility of our products.

We have been named as a “potentially responsible party” under Superfund or similar state laws at certain former and current sites requiring clean up. These laws generally impose liability for costs to investigate and remediate contamination without regard to fault. Under certain circumstances, liability may be joint and several, resulting in one responsible party being held responsible for the entire cleanup obligation. Liability may also include damages to natural resources. We have incurred and likely will continue to incur expenses to investigate and clean up certain of our existing and former facilities, for which we believe we have adequate reserves. The ongoing operation of our manufacturing plants also entails environmental risks, and we may incur material costs or liabilities in the future that could adversely affect us. Although most of our properties have been the subject of environmental site assessments, there can be no assurance that all potential instances of soil and groundwater contamination have been identified, even at those sites where assessments have been conducted. Accordingly, we may discover previously unknown environmental conditions and the cost of remediating such conditions may be material. See Note 16 to the consolidated financial statements included elsewhere in this Annual Report on Form 10-K.

We may also be required to comply with evolving environmental, health and safety laws, regulations or requirements that may be adopted or imposed in the future or to address newly discovered information or conditions that require a response. As our business expands to meet customer and market demands, and community growth impacts local ambient air and water limits, additional controls are anticipated to be required.

In addition, concerns about the relationship between greenhouse gases and global climate change, and an increased focus on carbon neutrality, has resulted, and may continue to result, in additional regulations at the national and international level to monitor, regulate, control and tax emissions of carbon dioxide and other greenhouse gases. A number of governmental bodies have introduced or are contemplating legislative or regulatory changes in response to climate change, including regulating greenhouse gas emissions. The continued lack of consistent climate legislation creates economic and regulatory uncertainty. The outcome of new legislation or regulation in the U.S. and other jurisdictions in which we operate has resulted in, and may in the future result in, new or additional requirements, including mandatory disclosure requirements, and fees or restrictions on certain activities. Our manufacturing plants use energy, including electricity and natural gas, and some of our plants emit amounts of greenhouse gases that may in the future be affected by these legislative and regulatory efforts. Compliance with greenhouse gas and climate change initiatives has resulted, and may in the future result in, additional costs to us, including increased energy, transportation and raw material costs, additional taxes, reduced emission allowances or additional restrictions on production or operations.

18

---

 

We expect we will be required to make additional investments in our facilities and equipment, change our manufacturing processes, obtain substitute materials, which may cost more or be less available or harder to source, fund offset projects, or undertake other costly activities. In addition, failure to comply with applicable regulations could result in fines or government investigations or actions, which could affect our business, financial condition, results of operations and cash flows. We could also face increased costs related to defending and resolving legal claims and other litigation related to climate change and the alleged impact of our operations on climate change.

In addition to compliance obligations related to climate change, growing customer environmental and sustainability requirements, including procurement policies that include social and emissions reduction or other environmental standards and requirements that suppliers are required comply with, as well as sustainability goals and targets that we have adopted, could cause us to alter our manufacturing, operations or equipment processes, and incur substantial expense to meet these requirements. We are actively reviewing and implementing projects to reduce our energy intensity and greenhouse gas emissions, but there is no guarantee that such options or projects will be technologically and/or environmentally feasible, or that we will be able to implement any such projects on a timely or cost-effective basis. The failure to comply with customer environmental or sustainability requirements, or similar types of requests, could adversely affect our relationships with such customers, which in turn could adversely affect our business, financial condition, results of operations and cash flows. Furthermore, our reputation could be damaged if we or others in our industry do not act, or are perceived not to act, responsibly with respect to our impact on the environment, or if we fail to achieve our sustainability goals or targets, which could limit our ability to grow and otherwise adversely affect our results of operations.

 

Our business and operations may be adversely affected by cybersecurity breaches or other information technology system or network intrusions.

 

We depend heavily on information technology and computerized systems to communicate and operate effectively. We store sensitive data, including proprietary business information, intellectual property, regulated data (U.S. government and other), customer data and confidential employee or other personal data, in our systems. In addition to internal information technology systems, we leverage cloud-based systems, where data is stored and exchanged with external third-party vendors. From time to time, we experience attempted cyberattacks on our information technology systems, either directly or indirectly via our supply chain or third-party vendors, which are becoming more sophisticated and could have a material impact on us. These cyberattacks, which could be related to industrial or foreign government espionage, activism, or financial motivations, continue to evolve and become more sophisticated and include attempting to covertly introduce malware to our systems, performing reconnaissance, phishing and other means of social engineering, impersonating authorized users, and stealing, corrupting, restricting our access to data or otherwise compromising the integrity, confidentiality, and/or availability of our systems hardware and networks and the information on them, among other activities. To the extent artificial intelligence capabilities improve and are increasingly adopted, they may be used to identify vulnerabilities and craft increasingly sophisticated cybersecurity attacks, and vulnerabilities may be introduced from the use of artificial intelligence by us, our customers, suppliers and other business partners and third-party providers.

We continue to update our infrastructure, security tools, planning, employee training and processes to protect against cybersecurity incidents, including both external and internal threats, and to prevent their occurrence or recurrence. We have implemented various measures, including technical security controls, employee training, comprehensive monitoring of our networks and systems, maintenance of backup systems and the use of disaster recovery capability. While Company personnel have been tasked to detect and investigate any security incidents, we cannot guarantee that such measures will be effective or sufficient to prevent a cyberattack, and future cyberattacks could still occur and could go undetected and persist for an extended period of time. Such cyberattacks could lead to data corruption or loss of data and exposure of proprietary and confidential information, disruptions in or damage to critical systems, production downtimes or operational delays, and theft of data, funds, or intellectual property, and we may be unable to mitigate potential consequences of these attacks. In addition, we face information technology security and fraud risks due to increased remote work, which may create additional information security vulnerabilities and/or magnify the impact of any disruption in our information technology systems. The unauthorized use of our confidential or proprietary business information could harm our competitive position and reputation, reduce the value of our investment in research and development and other strategic initiatives, cause us to breach contractual commitments to our customers or other third parties, or otherwise adversely affect our business.

 

Our customers, partners, suppliers and subcontractors and others to whom we entrust confidential data, and on whom we rely to provide products and services, face similar threats and growing requirements, including ones for which others may seek to hold us responsible. We depend on such parties to implement adequate controls and safeguards to protect against and report cyber incidents. If such parties fail to deter, detect or report cyber incidents in a timely manner, we may suffer from financial and other harm, including to our information, operations, financial results, performance, employees and reputation.

 

19

---

 

An intrusion may also result in fines, penalties, litigation or governmental investigations and proceedings, increased mitigation and remediation expenses, diminished competitive advantages through reputational damages and increased operational costs. Further, cybersecurity and data protection laws and regulations continue to evolve, and are increasingly demanding, both in the U.S. and globally, which adds compliance complexity and may increase our costs of compliance and expose us to litigation, monetary damages, regulatory enforcement actions or fines in one or more jurisdictions. Additionally, we have incurred, and expect to continue to incur, costs to comply with increased cybersecurity protections and standards of our customers, including the U.S. government. While we carry cybersecurity insurance, we cannot be certain that our coverage will be adequate for liabilities actually incurred, that insurance will continue to be available to us on economically reasonable terms, or at all, or that any insurer will not deny coverage as to any future claim.

 

We operate our business in regions subject to natural disasters and other severe weather events and any disruption to our business resulting from such events could adversely affect our revenue and results of operations.

We operate, and rely on suppliers who operate, in regions subject to natural disasters and other severe weather events. Extreme weather events and changing weather patterns present physical risks on existing infrastructure that may become more frequent or more severe as a result of factors related to climate change. In addition, the impacts of climate change on global water resources may result in water scarcity, which could in the future impact our ability to access sufficient quantities of water in certain locations and result in increased costs. We have in the past and will continue in the future to assess potential manufacturing and operational risks related to climate change, including risk of exposure to rising sea levels and significant rainfall, flooding, wildfire, drought, earthquake, hurricane or tornado events within our supply chain. We previously determined that a small percentage of our suppliers manufacture in vulnerable locations, which may impact distribution of raw materials to our operations, although we have taken actions to mitigate the potential impact where possible. We also have two sites in the southeast United States, a region vulnerable to severe weather events (i.e., hurricanes, tornadoes and floods), that are associated with excess warming. Although preventative measures may help to mitigate damage, such measures could be costly, and any disaster could adversely affect our ability to conduct business, including disrupting our supply of raw materials, damaging our manufacturing facilities or otherwise affecting production, transportation and delivery of our products, or affect demand for our products, and the insurance we maintain may not be adequate to cover our losses resulting from any business interruption resulting from a natural disaster or other severe weather events. Further, recurring extreme weather events could reduce the availability or increase the cost of insurance. Any future disruptions to our operations as a result of a natural disaster or severe weather event could have a material adverse impact on our liquidity, financial condition and results of operations.

 

Our business could be negatively impacted by sustainability/environmental, social and governance (“ESG”) matters and/or our reporting of such matters.

 

There is an increasing focus from certain investors, customers, employees, and other stakeholders concerning sustainability/ESG matters, and an increasing number of investors are requiring companies to disclose sustainability/ESG policies, practices and metrics. Our customers may require us to implement sustainability/ESG responsibility procedures or standards before they continue to do business with us. In addition, some investors use ESG criteria to guide their investment strategies, and may not invest in us, or divest their holdings of us, if they believe our policies relating to ESG matters are inadequate or, on the other hand, have a negative response to such policies as a result of anti-ESG sentiment. Additionally, we may face reputational challenges in the event that our sustainability/ESG policies, practices and metrics do not meet the standards set by certain constituencies, which are often inconsistent in approach.

 

In addition, from time to time, we communicate certain initiatives, targets or goals regarding sustainability/ESG matters. Although we intend to meet these commitments, we may be required to expend significant resources to do so, which could increase our operational costs. Further, there can be no assurance of the extent to which any of our commitments will be achieved, if at all; we could fail, or be perceived to fail, in our achievement of such initiatives, targets or goals, or we could fail in fully and accurately reporting our progress on such initiatives, targets and goals. In addition, we could be criticized for the scope of such initiatives, targets or goals or perceived as not acting responsibly in connection with these matters. Any such matters could have a material adverse effect on our business.

Risks Related to Our Common Stock

We cannot make any guarantees with respect to payment of dividends on, or repurchases of, our common stock.

 

We currently pay quarterly dividends; however, our board of directors regularly evaluates our capital allocation strategy and dividend policy, and any future determination to pay, maintain or increase cash dividends will be at the discretion of our board of directors and will depend upon, among other factors, our results of operations, financial condition, capital requirements and contractual or legal restrictions, including the requirements of our revolving credit facility and other financing agreements to which we may be a party.

20

---

 

No assurance can be given that cash dividends will continue to be declared and paid at historical levels or at all.

 

Our share repurchase program does not have an expiration date, and we are not obligated to repurchase a specified number or dollar value of shares, on any particular timetable or at all. There can be no assurance that we will repurchase stock at favorable prices. We resumed repurchases under our share repurchase program in the third quarter of 2023, following suspension of repurchases in April 2020; however, the repurchase program may be suspended or terminated at any time and, even if fully implemented, may not enhance long-term stockholder value.

 

Our amended and restated bylaws (the “bylaws”) provide that the Court of Chancery of the State of Delaware will be the exclusive forum for certain legal actions between us and our stockholders, which could discourage lawsuits against the Company and our directors and officers.

 

Our bylaws provide to the fullest extent permitted by law that, unless we consent in writing to the selection of an alternative forum, the Court of Chancery of the State of Delaware will be the sole and exclusive forum for any derivative action or proceeding brought on our behalf, any action asserting a claim of breach of a fiduciary duty owed by any of our directors, officers, employees or agents to us or our stockholders, any action asserting a claim arising pursuant to any provision of the Delaware General Corporation Law (the “DGCL”) or our restated certificate of incorporation, as amended (the “certificate of incorporation”), or bylaws, or any action asserting a claim governed by the internal affairs doctrine of the State of Delaware.

 

To the fullest extent permitted by law, this exclusive forum provision applies to state and federal law claims, including claims under the Securities Act of 1933, as amended, and the Securities Exchange Act of 1934, as amended (the "Exchange Act"), although the Company will not be deemed to have waived its compliance with the federal securities laws and the rules and regulations thereunder. The enforceability of similar choice of forum provisions in other companies’ organizational documents has been challenged in legal proceedings, and it is possible that, in connection with claims arising under federal securities laws or otherwise, a court could find the exclusive forum provision contained in the bylaws to be inapplicable or unenforceable.

 

This exclusive forum provision may limit the ability of our stockholders to bring a claim in a judicial forum that such stockholders find favorable for disputes with the Company or our directors or officers, which may discourage such lawsuits against the Company and our directors and officers. Alternatively, if a court were to find this exclusive forum provision inapplicable to, or unenforceable in respect of, one or more of the specified types of actions or proceedings described above, we may incur additional costs associated with resolving such matters in other jurisdictions, which could negatively affect our business, results of operations and financial condition.

 

Certain provisions of our certificate of incorporation, bylaws, and the DGCL have anti-takeover effects and could delay, discourage, defer or prevent a tender offer or takeover attempt that a stockholder might consider to be in the stockholders’ best interests.

 

Certain provisions of our certificate of incorporation and bylaws and the DGCL may have the effect of delaying or preventing changes in control if our board of directors determines that such changes in control are not in the best interests of the Company and its stockholders. Such provisions include, among other things, those that:

 

21

---

 

 

These provisions may delay or discourage transactions involving an actual or potential change in the Company’s control or change in the board of directors or management, including transactions in which stockholders might otherwise receive a premium for their shares of common stock or transactions that our stockholders might otherwise deem to be in their best interests. Accordingly, these provisions could adversely affect the price of our common stock.

 

ITEM 1B. Unresolved Staff Comments

None.

 

 

 

Item 1C. Cybersecurity

 

At Hexcel, we are committed to the security of our products and services, the protection of employee, customer and Company data, and the safeguarding of our manufacturing capability. Our cybersecurity program is led by our Chief Information Officer (“CIO”), who has over 20 years of experience in information technology leadership and 10 years of experience directly overseeing our information security program and holds a Master of Business Administration in technology management. As a part of our cybersecurity program, we have engaged, and in the future may continue to engage, third-party consultants and advisors, including a third-party consultant with extensive experience designing, leading, and maintaining the implementation and assurance frameworks for organizational information, to provide virtual chief information security officer services, including establishing a security architecture, policies, practices, and response capabilities.

Our CIO regularly updates senior management on our cybersecurity risk governance and management and the status of ongoing efforts to strengthen cybersecurity effectiveness. Our board of directors views cybersecurity as a strategic priority and therefore maintains oversight of management’s actions in implementing our overall cybersecurity program, with our CIO regularly reporting directly to our board of directors. The audit committee of the board of directors also periodically reviews the cybersecurity program as part of its oversight of the Company’s internal audit function and insurance program.

 

As part of our cybersecurity program, we maintain various protections designed to safeguard against cyberattacks, including firewalls, anti-malware, intrusion prevention and detection systems, access controls and other encryption configurations and cybertechnologies, and continuously monitor and audit our information technology and data assets to detect any anomalies and to respond quickly to threats that may arise. We periodically conduct intrusion and penetration testing through third parties to evaluate our cybersecurity response capability. We also regularly conduct employee awareness training on email management (phishing), safe internet browsing, malware, and other cybersecurity risks and routinely communicate with employees about the potential for cybersecurity threats, including the latest adversary trends and social engineering techniques, and how to avoid them through our established communications channels.

 

We have adopted and implemented an approach to identify and mitigate cybersecurity risks within our overall enterprise risk management program that is based on a recognized framework established by the National Institute of Standards and Technology. The board of directors is responsible for overseeing management’s enterprise risk management program, and receives regular reports on cybersecurity risk identification, monitoring and mitigation from our Chief Financial Officer as part of its review of that program, in addition to the regular reports received from the CIO as part of the board’s overall cybersecurity program review.

As part of our cybersecurity risk management, we have established controls and procedures to guide the Company through an active threat or incident to the recovery of normal business, following industry-standard data protection standards. The controls and procedures provide for the identification, notification, escalation, communication, and remediation of cybersecurity incidents to management, including where appropriate the board of directors, so that decisions regarding the public disclosure and reporting of such incidents can be made in a timely manner. We maintain an Executive Cyber Response Team composed of senior leaders across various functions, including our CIO, General Counsel and Chief Accounting Officer. The Executive Cyber Response Team is trained and experienced in managing cybersecurity incidents and meets regularly to practice and refine our processes for incident response, management and escalation through tabletop exercises simulating cyberattacks administered by a legal advisor with extensive experience in cyber investigations, cyber threats and cyber-enabled frauds. The results of such exercises are then reported to management and our board of directors. The third-party legal advisor also assesses and advises on our overall cybersecurity program, reports to our board of directors on a periodic basis and is engaged to provide support in the event an attack or other intrusion were to be successful.

22

---

 

 

The Company maintains disaster recovery plans for key applications and site-specific incident response plans, as well as a cybersecurity and related insurance policies as a measure of added protection.

 

As of the date of this report, the Company is not aware of any risks from cybersecurity threats that have materially affected or are reasonably likely to materially affect the Company, including its business strategy, results of operations, or financial condition.

23

---

 

ITEM 2. Properties

We own and lease manufacturing facilities and sales offices located throughout the United States and in other countries, as noted below. The corporate offices and principal corporate support activities are located in leased facilities in Stamford, Connecticut. Our research and technology administration and principal laboratories are located in Duxford, England; Les Avenières, France; Salt Lake City, Utah and Decatur, Alabama.

The following table lists our manufacturing facilities by geographic location, related segment, and principal products manufactured and total square footage.

 

Manufacturing Facilities
Facility Location	Segment	Principal Products	Total Square Footage
United States:
Amesbury, Massachusetts	Engineered Products	Microwave and RF Absorbing Composite Materials	202,100
Burlington, Washington	Engineered Products	Engineered Honeycomb Parts	252,124
Casa Grande, Arizona	Composite Materials	Honeycomb and Honeycomb Parts	443,123
Decatur, Alabama	Composite Materials	PAN Precursor (used to produce Carbon Fibers)	819,863
Kent, Washington	Engineered Products	Composite structures	486,400
Pottsville, Pennsylvania	Engineered Products	Engineered Honeycomb Parts	180,305
Salt Lake City, Utah	Composite Materials	Carbon Fibers; Prepregs	1,194,070
Seguin, Texas	Composite Materials	Fabrics; Specialty Reinforcements	228,815
South Windsor, Connecticut	Engineered Products	3D printed parts	32,600
International:
Casablanca, Morocco	Engineered Products	Engineered Honeycomb Parts	260,875
Dagneux, France	Composite Materials	Prepregs	213,698
Duxford, England	Composite Materials	Prepregs; Adhesives; Honeycomb and Honeycomb Parts	417,109
Illescas, Spain	Composite Materials	Carbon Fibers	58,986
Leicester, England	Composite Materials	Lightweight Multiaxials Fabrics	134,657
Les Avenières, France	Composite Materials	Fabrics; Specialty Reinforcements	490,000
Neumarkt, Austria	Composite Materials	Prepregs	159,791
Parla, Spain	Composite Materials	Prepregs	147,186
Roussillon, France	Composite Materials	PAN Precursor and Carbon Fibers	222,170
Stade, Germany	Composite Materials	Prepregs	154,268
Vert-le-Petit, France	Composite Materials	Pultruded profiles; Prepregs and Adhesives	70,944
Welkenraedt, Belgium	Engineered Products	Engineered Honeycomb Parts	235,326

 

 

We lease the land and buildings in South Windsor, Connecticut, and the land on which the Burlington, Washington and Roussillon, France facilities are located. We lease portions of the facilities located in Casa Grande, Arizona; Pottsville, Pennsylvania; Parla, Spain; and Leicester, England. In addition to the facility in Amesbury, Massachusetts we purchased in 2023, we also lease land and a building at another location in Amesbury. We own all other remaining manufacturing facilities. For further information, refer to “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and to Note 7 to the accompanying Consolidated Financial Statements of this Annual Report on Form 10-K.

ITEM 3. Legal Proceedings

The information required by Item 3 is contained within Note 16 on page 71 of this Annual Report on Form 10-K and is incorporated herein by reference.

ITEM 4. Mine Safety Disclosure ITEM 5.

Not applicable.

 

 

24

---

 

PART II

 

 

Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Hexcel common stock is traded on the New York Stock Exchange under the symbol HXL.

During 2023 the Company repurchased 423,292 shares of common stock on the open market under our share repurchase plan approved by our Board in 2018 (the “2018 Share Repurchase Plan”), at an average price of $71.17 per share for a total cost of $30.1 million, leaving approximately $187 million available for additional repurchases under the 2018 Repurchase Plan. .

On January 31, 2024, there were 390 holders of record of our common stock.

 

ITEM 6. [Reserved]

 

ITEM 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The information required by Item 7 is contained on pages 32 to 38 of this Annual Report on Form 10-K under “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and is incorporated herein by reference.

ITEM 7A. Quantitative and Qualitative Disclosures about Market Risk

The information required by Item 7A is contained under the heading “Market Risks” on pages 38 to 39 of this Annual Report on Form 10-K and is incorporated herein by reference.

 

ITEM 8. Financial Statements and Supplementary Data

The information required by Item 8 is contained on pages 40 to 77 of this Annual Report on Form 10-K under “Consolidated Financial Statements and Supplementary Data” and is incorporated herein by reference. The Reports of Independent Registered Public Accounting Firm are contained on page 42 to 44 of this Annual Report on Form 10-K under the captions “Reports of Independent Registered Public Accounting Firm” and are incorporated herein by reference.

ITEM 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

None.

 

ITEM 9A. Controls and Procedures

Our Chief Executive Officer and Chief Financial Officer have evaluated our disclosure controls and procedures as of December 31, 2023 and have concluded that these disclosure controls and procedures were effective to ensure that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized, and reported within the time periods specified in the SEC’s rules and forms. These disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by us in the reports we file or submit is accumulated and communicated to management, including the Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

Our Chief Executive Officer and Chief Financial Officer have concluded that there have not been any changes in our internal control over financial reporting during the fourth quarter ended December 31, 2023 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Management’s report on our internal control over financial reporting is contained on page 41 of this Annual Report on Form 10-K and is incorporated herein by reference.

 

ITEM 9B. Other Information

 

Certificate of Elimination

 

On February 7, 2024, the Company filed a Certificate of Elimination to its Restated Certificate of Incorporation (as amended, the “Certificate of Incorporation”) with the Secretary of State of the State of Delaware, which, effective upon filing, eliminated all matters set forth in the Certificate of Designations with respect to the Company’s Series A Junior Participating Preferred Stock from the Certificate of Incorporation. No shares of the Series A Junior Participating Preferred Stock were outstanding as of February 7, 2024. All shares that were designated as Series A Junior Participating Preferred Stock have been returned to the status of authorized but unissued shares of preferred stock of the Company, without designation as to series.

25

---

 

A copy of the Certificate of Elimination is filed as Exhibit 3.5 hereto and is incorporated herein by reference.

Rule 10b5-1 Trading Arrangements

 

No other directors or officers, as defined in Rule 16a-1(f) of the Exchange Act, adopted, modified or terminated a “Rule 10b5-1 trading arrangement,” or a “non-Rule 10b5-1 trading arrangement,” each as defined in Regulation S-K Item 408, during the fourth quarter of 2023.

ITEM 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections

Not applicable.

PART III

ITEM 10. Directors, Executive Officers and Corporate Governance

The information required by Item 10 will be incorporated by reference to the Company’s definitive proxy statement, in accordance with Instruction G(3) to Form 10-K, to be filed with the SEC no later than 120 days after the end of the Company’s fiscal year.

 

ITEM 11. Executive Compensation

The information required by Item 11 will be incorporated by reference to the Company’s definitive proxy statement, in accordance with Instruction G(3) to Form 10-K, to be filed with the SEC no later than 120 days after the end of the Company’s fiscal year.

 

ITEM 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

The information required by Item 12 will be incorporated by reference to the Company’s definitive proxy statement, in accordance with Instruction G(3) to Form 10-K, to be filed with the SEC no later than 120 days after the end of the Company’s fiscal year.

 

ITEM 13. Certain Relationships and Related Transactions, and Director Independence

The information required by Item 13 will be incorporated by reference to the Company’s definitive proxy statement, in accordance with Instruction G(3) to Form 10-K, to be filed with the SEC no later than 120 days after the end of the Company’s fiscal year.

 

ITEM 14. Principal Accountant Fees and Services

The information required by Item 14 will be incorporated by reference to the Company’s definitive proxy statement, in accordance with Instruction G(3) to Form 10-K, to be filed with the SEC no later than 120 days after the end of the Company’s fiscal year.

 

26

---

 

PART IV

 

 

ITEM 15. Exhibits, Financial Statement Schedules

(a) Financial Statements, Financial Statement Schedules and Exhibits

 

(1)		Financial Statements:
		Reports of Independent Registered Public Accounting Firm
		Consolidated Balance Sheets as of December 31, 2023 and 2022
		Consolidated Statements of Operations for each of the three years ended December 31, 2023, 2022 and 2021
		Consolidated Statements of Comprehensive Income (Loss) for each of the three years ended December 31, 2023, 2022 and 2021
		Consolidated Statements of Stockholders’ Equity for each of the three years ended December 31, 2023, 2022 and 2021
		Consolidated Statements of Cash Flows for each of the three years ended December 31, 2023, 2022 and 2021
		Notes to the Consolidated Financial Statements

 

(2) Consolidated Financial Statement Schedules:

 

All financial statement schedules are omitted as they are inapplicable, or the required information has been included in the consolidated financial statements or notes thereto.

 

(3) Exhibits:

The following list of exhibits includes exhibits submitted with this Annual Report on Form 10-K as filed with the SEC and those incorporated by reference to other filings.

 

Exhibit No.		Description
3.1		Restated Certificate of Incorporation of Hexcel Corporation (incorporated herein by reference to Exhibit 1 to the Company’s Registration Statement on Form 8-A dated July 9, 1996, Registration No. 1-08472).
3.2		Certificate of Amendment of the Restated Certificate of Incorporation of Hexcel Corporation (incorporated herein by reference to Exhibit 3.2 to the Company’s Annual Report on Form 10-K/A for the fiscal year ended December 31, 2002, filed on March 31, 2003).
3.3		Amended and Restated Bylaws of Hexcel Corporation (as of September 12, 2023) (incorporated herein by reference to Exhibit 3.1 to the Company’s Current Report on Form 8-K dated September 15, 2023)
3.4		Certificate of Designations of Series A Junior Participating Preferred Stock of Hexcel Corporation, as filed with the Secretary of the State of Delaware on April 6, 2020 (incorporated herein by reference to Exhibit 3.1 to the Company’s Current Report on Form 8-K dated April 6, 2020).
3.5		Certificate of Elimination of Series A Junior Participating Preferred Stock of Hexcel Corporation, as filed with the Secretary of State of Delaware on February 7, 2024.
4.1		Indenture, dated as of August 3, 2015, between Hexcel Corporation and U.S. Bank National Association, as Trustee (incorporated herein by reference to Exhibit 4.1 to the Company’s Current Report on Form 8-K dated August 3, 2015).
4.2		First Supplemental Indenture, dated as of August 3, 2015, between Hexcel Corporation and U.S. Bank National Association, as Trustee (incorporated herein by reference to Exhibit 4.2 to the Company’s Current Report on Form 8-K dated August 3, 2015).
4.3		Second Supplemental Indenture, dated as of February 16, 2017, between Hexcel Corporation and U.S. Bank National Association, as Trustee (incorporated herein by reference to Exhibit 4.1 to the Company’s Current Report on Form 8-K dated February 16, 2017).
4.4		Form of Note for 4.700% Senior Notes due 2025 (incorporated herein by reference to Exhibit A of Exhibit 4.2 to the Company’s Current Report on Form 8-K dated August 3, 2015).
4.5		Form of Note for 3.950% Senior Notes due 2027 (incorporated herein by reference to Exhibit A of Exhibit 4.1 to the Company’s Current Report on Form 8-K dated February 16, 2017).

27

---

 

4.6		Description of Hexcel Corporation’s Securities Registered Pursuant to Section 12 of the Securities Exchange Act of 1934.
10.1**		Credit Agreement, dated as of April 25, 2023, by and among Hexcel Corporation, as borrower, the lenders party thereto, Citizens Bank N.A., as agent for the lenders, and the other institutions party thereto (incorporated herein by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K dated April 28, 2023).
10.2*		Hexcel Corporation 2013 Incentive Stock Plan, as amended (incorporated herein by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K dated May 10, 2019).
10.3*		Hexcel Corporation 2003 Incentive Stock Plan, as amended and restated as of May 7, 2009 (incorporated herein by reference to Exhibit 10.4(d) to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2009).
10.4*		Hexcel Corporation Management Incentive Compensation Plan, as Amended and Restated on December 8, 2016 (incorporated herein by reference to Exhibit 10.6 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2016).
10.5*		Form of Employee Option Agreement (2014 - 2017) (incorporated herein by reference to Exhibit 10.8 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2016).
10.6*		Form of Option Agreement for Executive Officers (2020) (incorporated herein by reference to Exhibit 10.10 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2019).
10.7*		Form of Option Agreement for Non-U.S. Executive Officers (2020) (incorporated herein by reference to Exhibit 10.13 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2019).
10.8*		Form of Restricted Stock Unit Agreement for Executive Officers (2021) (incorporated herein by reference to Exhibit 10.16 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2020).
10.9*		Form of Performance Based Award Agreement for Executive Officers (2021) (incorporated herein by reference to Exhibit 10.17 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2020).
10.10*		Form of Option Agreement for Executive Officers (2021) (incorporated herein by reference to Exhibit 10.18 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2020).
10.11*		Form of Restricted Stock Unit Agreement for Non-U.S. Executive Officers (2021) (incorporated herein by reference to Exhibit 10.19 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2020).
10.12*		Form of Performance Based Award Agreement for Non-U.S. Executive Officers (2021) (incorporated herein by reference to Exhibit 10.20 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2020).
10.13*		Form of Option Agreement for Non-U.S. Executive Officers (2021) (incorporated herein by reference to Exhibit 10.21 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2020).
10.14*		Form of Performance Based Award Agreement for Executive Officers (2022) (incorporated herein by reference to Exhibit 10.1 to the Company’s Quarterly Report on Form 10-Q for the quarter ended March 31, 2022).
10.15*		Form of Performance Based Award Agreement for Non-U.S. Executive Officers (2022) (incorporated herein by reference to Exhibit 10.2 to the Company’s Quarterly Report on Form 10-Q for the quarter ended March 31, 2022).
10.16*		Form of Performance Based Award Agreement for Executive Officers (2023) (incorporated herein by reference to Exhibit 10.23 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2022).
10.17*		Form of Performance Based Award Agreement for Non-U.S. Executive Officers (2023) (incorporated herein by reference to Exhibit 10.24 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2022).
10.18*		Form of Option Agreement for Executive Officers (2024).
10.19*		Form of Option Agreement for Non-U.S. Executive Officers (2024).
10.20*		Restricted Stock Unit Agreement between Hexcel Corporation and Thierry Merlot (incorporated herein by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K dated October 25, 2019).
10.21*		Hexcel Corporation Nonqualified Deferred Compensation Plan, effective as of January 1, 2005, Amended and Restated as of January 1, 2023 (incorporated herein by reference to Exhibit 10.1 to the Company’s Quarterly Report on Form 10-Q for the quarter ended March 31, 2023).

28

---

 

10.22*		Offer of Employment between Hexcel Corporation and Nick L. Stanage dated July 22, 2013 (incorporated herein by reference to Exhibit 10.2 to the Company’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2013).
10.23*		Amendment to the Offer of Employment Letter dated July 22, 2013 between Hexcel Corporation and Nick L. Stanage, dated June 1, 2018 (incorporated herein by reference to Exhibit 10.1 to the Company’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2018).
10.24*		Supplemental Executive Retirement Agreement dated October 28, 2009, between Nick L. Stanage and Hexcel Corporation (incorporated herein by reference to Exhibit 99.1 to the Company’s Current Report on Form 8-K dated October 28, 2009).
10.25*		Amendment No. 1 to the Supplemental Executive Retirement Agreement dated October 28, 2009, between Nick L. Stanage and Hexcel Corporation, effective December 31, 2020 (incorporated herein by reference to Exhibit 10.30 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2020).
10.26*		Amendment No. 2 to the Supplemental Executive Retirement Agreement dated October 28, 2009, between Nick L. Stanage and Hexcel Corporation, effective July 26, 2021 (incorporated herein by reference to Exhibit 10.2 to the Company’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2021).
10.27*		Hexcel Corporation Executive Severance Policy (incorporated herein by reference to Exhibit 10.3 to the Company’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2013).
10.28*		Form of Officer Severance Agreement entered into between Hexcel Corporation and each of Patrick Winterlich and Gail Lehman, dated October 2, 2017 (incorporated herein by reference to Exhibit 99.1 to the Company’s Current Report on Form 8-K dated October 6, 2017).
10.29*		Amendment to the Officer Severance Agreement, dated October 2, 2017, between Hexcel Corporation and Patrick Winterlich, dated June 1, 2018 (incorporated herein by reference to Exhibit 10.2 to the Company’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2018).
10.30*		Amendment to the Officer Severance Agreement, dated October 2, 2017, between Hexcel Corporation and Gail E. Lehman, dated June 1, 2018 (incorporated herein by reference to Exhibit 10.3 to the Company’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2018).
10.31*		Form of Officer Severance Agreement entered into between Hexcel Corporation and Gina Fitzsimons, dated October 6, 2023.
10.32*		Director Compensation Program, effective December 7, 2023 (incorporated herein by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K dated January 5, 2024).
10.33*		Form of Restricted Stock Unit Agreement for Non-Employee Directors (incorporated herein by reference to Exhibit 10.21 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2017).
10.34*		Form of Restricted Stock Unit Agreement for Non-Employee Directors (Annual Grant - 2020) (incorporated herein by reference to Exhibit 10.31 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2019).
10.35*		Form of Restricted Stock Unit Agreement for Non-Employee Directors (Retainer - 2020) (incorporated herein by reference to Exhibit 10.32 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2019).
10.36*		Form of Restricted Stock Unit Agreement for Non-Employee Directors (2021 Deferred Annual Grant) (incorporated herein by reference to Exhibit 10.46 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2020).
10.37*		Form of Restricted Stock Unit Agreement for Non-Employee Directors (2021 Deferred Retainer Grant) (incorporated herein by reference to Exhibit 10.48 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2020).
10.38*		Form of Restricted Stock Unit Agreement for Non-Employee Directors (2024 Non-Deferred Annual Grant).
10.39*		Form of Restricted Stock Unit Agreement for Non-Employee Directors (2024 Deferred Annual Grant).
10.40*		Form of Restricted Stock Unit Agreement for Non-Employee Directors (2024 Deferred Retainer Grant).
10.41*		Hexcel Corporation 2016 Employee Stock Purchase Plan (as amended and restated effective February 3, 2021) (incorporated herein by reference to Exhibit 99.1 to the Company’s Registration Statement on Form S-8, Registration Statement No. 333-256928, filed on June 9, 2021).

29

---

 

10.42*		Form of Indemnification Agreement for Directors and Officers (incorporated herein by reference to Exhibit 10.53 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2022).
21		Subsidiaries of the Company.
23.1		Consent of Ernst & Young LLP.
24		Power of Attorney (included on signature page).
31.1		Certification of Chief Executive Officer, Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
31.2		Certification of Chief Financial Officer, Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
32		Certification of Chief Executive Officer and Chief Financial Officer Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 (furnished herewith).
97		Hexcel Corporation Mandatory Clawback Policy.
101		The following financial statements from the Company’s Annual Report on Form 10-K for the year ended December 31, 2023, formatted in Inline XBRL: (i) Consolidated Balance Sheets, (ii) Consolidated Statements of Operations, (iii) Consolidated Statements of Comprehensive Income (Loss), (iv) Consolidated Statements of Stockholders’ Equity, (v) Consolidated Statements of Cash Flows, and (vi) Notes to Consolidated Financial Statements.
104		Cover Page Interactive Data File: the cover page XBRL tags are embedded within the Inline XBRL document and are contained within Exhibit 101.

* Indicates management contract or compensatory plan or arrangement.

** Schedules and exhibits have been omitted pursuant to Regulation S-K, Item 601(a)(5). The Company will provide a copy of any omitted schedule or exhibit to the Securities and Exchange Commission or its staff upon request.

ITEM 16. Form 10-K Summary

None.

30

---

 

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

		Hexcel Corporation
February 7, 2024		/s/ NICK L. STANAGE
(Date)		Nick L. Stanage
		Chairman of the Board of Directors, Chief Executive Officer and President

 

KNOWN TO ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints each of Nick L. Stanage, Patrick Winterlich and Gail Lehman, individually, his or her attorney-in-fact, with the power of substitution, for him or her in any and all capacities, to sign any amendments to this report, and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that each said attorney-in-fact, or his or her substitute or substitutes, may do or cause to be done by virtue hereof.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.

 

Signature		Title		Date
/s/ NICK L. STANAGE		Chairman of the Board of Directors,		February 7, 2024
(Nick L. Stanage)		Chief Executive Officer and President
		(Principal Executive Officer)
/s/ PATRICK WINTERLICH		Executive Vice President and		February 7, 2024
(Patrick Winterlich)		Chief Financial Officer
		(Principal Financial Officer)
/s/ AMY S. EVANS		Senior Vice President,		February 7, 2024
(Amy S. Evans)		Chief Accounting Officer
		(Principal Accounting Officer)
/s/ JEFFREY C. CAMPBELL		Director		February 7, 2024
(Jeffrey C. Campbell)
/s/ JAMES J. CANNON		Director		February 7, 2024
(James J. Cannon)
/s/ CYNTHIA M. EGNOTOVICH		Director		February 7, 2024
(Cynthia M. Egnotovich)
/s/ THOMAS A. GENDRON		Director		February 7, 2024
(Thomas A. Gendron)
/s/ JEFFREY A. GRAVES		Director		February 7, 2024
(Dr. Jeffrey A. Graves)
/s/ GUY C. HACHEY		Director		February 7, 2024
(Guy C. Hachey)
/s/ PATRICIA A. HUBBARD		Director		February 7, 2024
(Dr. Patricia A. Hubbard)
/s/ MARILYN L. MINUS		Director		February 7, 2024

(Dr. Marilyn L. Minus)

/s/ CATHERINE A. SUEVER		Director		February 7, 2024
(Catherine A. Suever)

 

31

---

 

MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

 

Management’s discussion and analysis of the Company’s financial condition and results of operations for the year ended December 31, 2023, and comparison to the year ended December 31, 2022 should be read in conjunction with the consolidated financial statements and notes of this Annual Report on Form 10-K.

 

For discussion and analysis of financial condition and results of operations for 2022 compared to 2021 refer to Part II, Item 7, Management's Discussion and Analysis of Financial Condition and Results of Operations in our 2022 Annual Report on Form 10-K, filed with the SEC on February 8, 2023, which is incorporated by reference into this Management’s Discussion and Analysis of Financial Condition and Results of Operations.

 

Business Overview

		For the Years Ended December 31,
(In millions)		2023				2022
Net sales		$	1,789.0			$	1,577.7
Gross margin %			24.2	%			22.6	%
Other operating (income) expense		$	1.4			$	(11.9	)
Operating income		$	215.3			$	175.2
Operating income %			12.0	%			11.1	%
Interest expense, net		$	34.0			$	36.2
Income tax expense		$	12.1			$	31.6
Equity in earnings from affiliated companies		$	8.1			$	8.1
Net income		$	105.7			$	126.3

 

Business Trends

The Commercial Aerospace market and our business began to see signs of recovery from the economic impacts of the COVID-19 pandemic in the second half of 2021. During 2023, growth continued in air travel along with an increase in aircraft build rates. Despite this improvement, global logistics, supply chains, inflationary pressures and the effects of geopolitical issues and conflicts still remained a challenge. These challenges have had and may continue to have further negative impacts on our operations, supply chain, transportation networks and customers, all of which have and may continue to compress our financial results.

In 2023, our Commercial Aerospace sales increased 17.2% compared to 2022. The 2023 increase in sales was primarily driven by the Airbus A350 and the Boeing 787 programs. Other Commercial Aerospace, which includes business jets and regional aircraft saw an increase in sales as well, driven by increasing composite adoption on large-cabin business jets. The demand for new commercial aircraft is principally driven by two factors. The first is airline passenger traffic (measured by revenue passenger miles) and the second is the replacement rate for existing aircraft. The Commercial Aerospace industry continues to utilize a greater proportion of advanced composite materials with each new generation of aircraft.

Space & Defense sales in 2023 increased 17.1% compared to 2022. Growth was across numerous programs including fixed-wing and space programs globally and helicopters internationally. New or retrofit rotorcraft programs have an increased reliance on composite materials. Our products are included on a wide range of rotorcraft, military aircraft, and space programs. In addition, our Engineered Products segment provides specialty value added services such as machining, sub-assembly, and even full blade manufacturing for rotorcraft.

Industrial sales decreased 12.3% in 2023. Industrial sales include automotive, recreation, wind energy and general industrial applications. In 2023, industrial sub-markets softened, more than offsetting the double-digit sales growth in automotive.

Results of Operations

We have two reportable segments: Composite Materials and Engineered Products. Although these segments provide customers with different products and services, they often overlap within our three end business markets: Commercial Aerospace, Space & Defense and Industrial. Therefore, we also find it meaningful to evaluate the sales of our segments through these business markets. Further discussion and additional financial information about our segments may be found in Note 18 to the accompanying consolidated financial statements of this Annual Report on Form 10-K.

Net Sales: Consolidated net sales of $1,789.0 million for 2023 increased by 13.4% (12.9% in constant currency) compared to 2022. The sales increase in 2023 reflects higher Commercial Aerospace and Space & Defense sales, partially offset by a decline in Industrial sales.

32

---

 

The following table summarizes net sales to third-party customers by segment and end market in 2023 and 2022:

 

(In millions)		Commercial Aerospace				Space & Defense				Industrial				Total
2023 Net Sales
Composite Materials		$	912.6			$	389.2			$	172.4			$	1,474.2
Engineered Products			155.6				155.6				3.6				314.8
Total		$	1,068.2			$	544.8			$	176.0			$	1,789.0
			60	%			30	%			10	%			100	%
2022 Net Sales
Composite Materials		$	775.0			$	308.3			$	196.4			$	1,279.7
Engineered Products			136.8				156.9				4.3				298.0
Total		$	911.8			$	465.2			$	200.7			$	1,577.7
			58	%			29	%			13	%			100	%

Sales by Segment

Composite Materials: Net sales of $1,474.2 million for 2023 increased 15.2% from 2022. Commercial Aerospace sales increased 17.8% in 2023 as compared to 2022 primarily driven growth in the Airbus A350 and Boeing 787 programs as well as business jet growth. Space & Defense sales increased 26.2% led by growth in military aircraft. Industrial sales in 2023 decreased 12.2% from 2022 primarily due to the decline in certain industrial sub-markets which offset growth in automotive.

Engineered Products: Net sales of $314.8 million for 2023 increased 5.6% from 2022, driven by a 13.7% increase in Commercial Aerospace sales. Space & Defense sales were relatively flat year over year while Industrial sales were $0.7 million lower in 2023.

 

Sales by Market

 

Commercial Aerospace: Net sales of $1,068.2 million increased 17.2% (17.0% in constant currency) for the year ended December 31, 2023 as compared to the year ended December 31, 2022. Strong growth came from increasing widebody sales for the Airbus A350 and Boeing 787, supported by moderate growth from the Airbus A320neo and Boeing 737 MAX. The sub-category, Other Commercial Aerospace increased 14.1% for 2023 compared to 2022 driven by increasing composite adoption on large-cabin business jets.

Space & Defense: Net sales of $544.8 million increased 17.1% (16.6% in constant currency) for 2023 as compared to 2022. Growth was across numerous programs including fixed-wing and space programs globally and European helicopters.

Industrial: Net sales of $176.0 million decreased 12.3% (13.6% in constant currency) compared to 2022 as a number of industrial sub-markets softened, more than offsetting the double-digit sales growth in automotive.

2023 Consolidated Results Compared to 2022

Gross Margin: Gross margin for 2023 was $433.2 million or 24.2% of net sales as compared to $357.1 million or 22.6% of net sales in 2022. The improvement in 2023 was due to the higher sales and improved operating leverage.

Selling, General and Administrative (“SG&A”) Expenses: SG&A expenses for 2023 were $163.8 million or 9.2% of net sales as compared to $148.0 million or 9.4% of net sales for 2022. The higher SG&A expenses in 2023 were primarily due to an increase in employee-related costs as headcount increased approximately 8% year over year.

Research and Technology (“R&T”) Expenses: R&T expenses for 2023 were $52.7 million or 2.9% of net sales and in 2022 were $45.8 million or 2.9% of net sales. The year-over-year increase in expenses was attributable to higher employee-related costs and materials and supplies expense resulting from an increase in the number of development projects.

Other operating expense (income): Other operating expense for 2023 of $1.4 million included restructuring costs as well as the net gain of $0.8 million from the sale of the Windsor, Colorado facility. Other operating income for 2022 of $11.9 million included the gain on the sale of our Dublin, California facility of $19.4 million which was partially offset by restructuring expenses.

33

---

 

Operating income: Operating income for 2023 was $215.3 million compared with operating income in 2022 of $175.2 million. Operating income as a percent of sales was 12.0% and 11.1% in 2023 and 2022, respectively. The increase in operating income in 2023 compared to 2022 was primarily driven by the higher sales.

Depreciation and amortization expense of 124.8 million for 2023 decreased $1.4 million from 2022.

Other expense (income): Other expense for 2023 included a non-cash charge of $70.5 million related to the completion of the buy-out of the UK pension plan and a gain of $1.9 million related to excess assets from the UK pension plan that reverted back to the Company. Amounts for 2023 also included a charge of $3.0 million (including the write-off of approximately $9 million in currency translation amounts) on the sale of our 50% interest in the joint venture in Malaysia. Other income for 2022 included the receipt of $10.5 million related to the Aviation Manufacturing Jobs Protection program.

Interest expense: Interest expense was $34.0 million for 2023 and $36.2 million for 2022 with the decrease due to lower average debt levels, partially offset by higher interest rates.

 

Income tax expense: For the years ended December 31, 2023 and 2022, we had a tax provision of $12.1 million and $31.6 million, respectively.

Equity in earnings from affiliated companies: Earnings represent our portion of the earnings or losses from our joint venture in Malaysia. In December 2023, we sold our 50% interest in the joint venture and received net proceeds of $44.7 million.

Net income: Net income was $105.7 million or $1.24 per diluted share for the year ended December 31, 2023 compared to net income of $126.3 million or $1.49 per diluted share for the year ended December 31, 2022.The decline in 2023 was due to the non-cash charge related to the buy-out of the UK pension plan discussed above.

Financial Condition

In 2023, we ended the year with total debt, net of cash, of $472.5 million and generated $257.1 million of operating cash resulting in $148.9 million of free cash flow (cash provided by operating activities less cash paid for capital expenditures). We expect our cash flow needs for fiscal year 2024 will be funded by cash generated from our operations as well as available borrowings under our Senior Unsecured Revolving Credit Facility (the “Facility”) as needed.

We have a portfolio of derivatives related to currencies, interest rates and commodities. We monitor our counterparties, and we only use those rated investment grade.

Liquidity

Our cash on hand at December 31, 2023 was $227.0 million, as compared to $112.0 million at December 31, 2022. Of the total cash on hand at December 31, 2023, $55.8 million was held by our foreign locations. As of December 31, 2023 total debt was $699.5 million, as compared to $723.5 million at December 31, 2022. As of December 31, 2023, we were in compliance with all debt covenants.

 

On April 25, 2023, we entered into a new credit agreement (the “Credit Agreement”) to refinance the “Facility. Under the terms of the Credit Agreement the borrowing capacity is $750 million. The Facility matures in April 2028.

 

As of December 31, 2023, there were no outstanding borrowings under the Facility. The Credit Agreement permits us to issue letters of credit up to an aggregate amount of $50 million. Outstanding letters of credit reduce the amount available for borrowing under the Facility. As of December 31, 2023, there were no issued letters of credit under the Facility, resulting in undrawn availability under the Facility of $750 million.

For more information regarding the Facility, see Note 6, Debt, to the accompanying consolidated financial statements of this Annual Report on Form 10-K.

 

Short-term liquidity requirements consist primarily of normal recurring operating expenses and working capital needs, capital expenditures, dividend payments and debt service requirements. We expect to meet our short-term liquidity requirements through net cash from operating activities, cash on hand and the Facility. As of December 31, 2023, long-term liquidity requirements consist primarily of obligations under our long-term debt obligations. We do not have any significant required debt repayments until August 2025 when our 4.7% Senior Unsecured Notes are due.

34

---

 

 

The remaining authorization under the share repurchase program at December 31, 2023 was $187 million. On January 24, 2024, our Board of Directors declared a quarterly dividend of $0.15 per share payable to stockholders of record as of February 9, 2023, with a payment date of February 16, 2024.

Operating Activities: We generated $257.1 million in cash from operating activities during 2023, an increase of $84.0 million from 2022. The increase in the current year was due to a lower use of working capital as well as higher non-cash adjustments driven by the UK pension settlement. The lower use of working capital for the year ended December 31, 2023 was primarily due to lower inventory and accounts receivable, partially offset by a decline in payables and accruals.

Investing Activities: Net cash used for investing activities was $50.7 million in 2023 compared to $54.6 million in 2022. Capital expenditures for 2023 were $108.2 million and included $38.0 million for the acquisition of the land and building at our Amesbury, Massachusetts facility to support future growth. Capital expenditures for 2022 were $76.3 million. 2023 included net proceeds of $44.7 million from the sale of our 50% interest in the joint venture in Malaysia and $10.3 million from the sale of the Windsor, Colorado facility. 2022 included net proceeds of $21.2 million from the sale of the Dublin, California facility.

Financing Activities: Net cash used for financing activities was $92.6 million in 2023 as compared to $130.0 million in 2022. Borrowings under the Facility during 2023 were $103 million, while repayments were $128 million. In 2022, borrowings were $50 million and repayments were $150 million. Dividend payments to shareholders were $42.2 million and $33.7 million in the years ended December 31, 2023 and 2022, respectively. During 2023, repurchases of common stock totaled $30.1 million.

Financial Obligations and Commitments: We had $0.1 million of current debt maturities as of December 31, 2023. The next significant scheduled debt maturity will not occur until August 2025 when our 4.7% Senior Unsecured Notes are due. In addition, certain sales and administrative offices, data processing equipment, vehicles and manufacturing equipment, land and facilities are leased under operating leases.

The following table summarizes the scheduled maturities as of December 31, 2023 of financial obligations and expiration dates of commitments for the years ended 2024 through 2028 and thereafter.

(In millions)		2024					2025					2026					2027					2028					Thereafter					Total
Senior unsecured credit facility due 2028		$		—			$		—			$		—			$		—			$		—			$	—				$		—
4.7% senior notes due 2025				—					300.0					—					—					—					—					300.0
3.95% senior notes due 2027				—					—					—					400.0					—					—					400.0
Purchase obligations				13.2					8.9					3.5					2.9					2.0					11.0					41.5
Finance lease and other				0.1					0.1					—					—					—					—					0.2
Subtotal		$		13.3			$		309.0			$		3.5			$		402.9			$		2.0			$		11.0			$		741.7
Operating leases				8.1					5.8					5.0					4.1					3.7					6.0					32.7
Total financial obligations		$		21.4			$		314.8			$		8.5			$		407.0			$		5.7			$		17.0			$		774.4
Interest payments				32.8					27.3					18.0					3.3					0.4					—					81.8
Estimated benefit plan contributions				2.5					9.3					9.7					2.6					2.7					9.2					35.9
Total commitments		$		56.7			$		351.4			$		36.2			$		412.9			$		8.8			$		26.2			$		892.1

 

As of December 31, 2023, we had $2.4 million of unrecognized tax benefits. This represents tax benefits associated with various tax positions taken, or expected to be taken, on domestic tax returns that have not been recognized in our financial statements due to uncertainty regarding their resolution. The resolution or settlement of these tax positions with the taxing authorities is at various stages.

For further information regarding our financial obligations and commitments, see Notes 6, 7, 8 and 16 to the accompanying consolidated financial statements of this Annual Report on Form 10-K.

 

Non-GAAP Financial Measures

 

The Company uses non-GAAP financial measures, including sales and expenses measured in constant dollars (prior year sales and expenses measured at current year exchange rates); operating income, net income and diluted earnings per share adjusted for items included in operating expense and non-operating expenses; and free cash flow. Management believes these non-GAAP measures are meaningful to investors because they provide a view of Hexcel with respect to ongoing operating results and comparisons to prior periods. These adjustments can represent significant charges or credits that we believe are important to an understanding of Hexcel’s overall operating results in the periods presented. Such non-GAAP measures are not determined in accordance with generally accepted accounting principles and should not be viewed in isolation or as an alternative to or substitutes for GAAP measures of performance.

35

---

 

Our calculation of these measures may not be comparable to similarly titled measures used by other companies, and the measures exclude financial information that some may consider important in evaluating our performance. Reconciliations to adjusted operating income, adjusted net income, adjusted diluted net income per share and free cash flow are provided below.

		Year Ended December 31,
(In millions)		2023				2022
GAAP operating income		$	215.3			$	175.2
Other operating expense (income) (1)			1.4				(11.9	)
Adjusted operating income (Non-GAAP)		$	216.7			$	163.3

 

		Year Ended December 31,
		2023									2022
(In millions, except per diluted share data)		Net Income				EPS					Net Income				EPS
GAAP net income		$	105.7			$	1.24				$	126.3			$	1.49
Other operating expense (income), net of tax (1)			1.0				0.01					(10.1	)			(0.12	)
Other expense (income), net of tax (2)			57.4				0.67					(8.4	)			(0.10	)
Tax (benefit) expense (3)			(9.3	)			(0.11	)				1.0				0.01
Adjusted net income (Non-GAAP)		$	154.8			$	1.81				$	108.8			$	1.28

 

		Year Ended December 31,
(In millions)		2023				2022
Net cash provided by operating activities		$	257.1			$	173.1
Less: Capital expenditures			(108.2	)			(76.3	)
Free cash flow (Non-GAAP)		$	148.9			$	96.8

 

Critical Accounting Policies and Estimates

Our consolidated financial statements are prepared based upon the selection and application of accounting principles generally accepted in the United States of America, which require us to make estimates and assumptions about future events that affect amounts reported in our financial statements and accompanying notes. Future events and their effects cannot be determined with absolute certainty. Therefore, the determination of estimates requires the exercise of judgment. Actual results could differ from those estimates, and any such differences may be significant to the financial statements. The accounting policies below are those we believe are the most critical to the preparation of our financial statements and require the most difficult, subjective, and complex judgments. Our other accounting policies are described in the accompanying Notes to the consolidated financial statements of this Annual Report on Form 10-K.

36

---

 

Income Taxes

We have operations in several countries throughout the world where we are subject to income and similar taxes. The estimation of income tax amounts often involves the interpretation of complex regulations and tax laws. In addition, estimations also must consider the impact foreign taxes may have on domestic taxes, as well as the analysis of the realizability of deferred tax assets, tax audit findings and uncertain tax positions. Although we believe our tax accruals are adequate, differences may occur in the future, depending on the resolution of pending and new tax matters.

Deferred tax assets and liabilities are determined based on temporary differences between the financial reporting and tax bases of assets and liabilities using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. A valuation allowance is provided against a deferred tax asset when it is more likely than not that all or some portion of the deferred tax asset will not be realized. The determination of the required valuation allowance and the amount, if any, of deferred tax assets to be recognized involves significant estimates regarding the timing and amount of reversal of taxable temporary differences, future taxable income, and the implementation of tax planning strategies. In particular, ASC 740, Income Taxes, requires that all available positive and negative evidence be weighed to determine whether a valuation allowance should be recorded.

We are subject to taxation in the U.S. and various states and foreign jurisdictions. The amount of income taxes we pay are subject to ongoing audits by federal, state and foreign tax authorities, which may result in proposed assessments. Our estimate for the potential outcome for any uncertain tax issue is judgmental. We assess our income tax positions, and record tax benefits for all years subject to examination based upon our evaluation of the facts, circumstances and information available at the reporting date. We recognize interest accrued related to unrecognized tax benefits as a component of interest expense and penalties as a component of income tax expense in the consolidated statements of operations. If we do not believe that it is more likely than not that a tax benefit will be sustained, no tax benefit is recognized. As of December 31, 2023, we had uncertain tax positions for which it is reasonably possible that amounts of unrecognized tax benefits could significantly change over the next year. These uncertain tax positions relate to our tax returns from 2014 onward.

For further discussion, see Note 9, Income taxes, to the accompanying consolidated financial statements of this Annual Report on Form 10-K.

Retirement and Other Postretirement Benefit Plans

We maintain qualified defined benefit retirement plans covering certain current and former European employees, as well as nonqualified defined benefit retirement plans, and retirement savings plans covering certain eligible U.S. and European employees and participate in a union sponsored multi-employer pension plan covering certain U.S. employees with union affiliations. In addition, we provide certain postretirement health care and life insurance benefits to eligible U.S. retirees. We have defined benefit retirement plans in Belgium, France, and Austria covering certain employees of our subsidiaries in those countries. During the fourth quarter of 2023, we finalized the buy-out of the UK plan and we no longer have any obligations relative to the plan.

Under the retirement savings plans, eligible U.S. employees can contribute up to 75% of their compensation to an individual 401(k) retirement savings account. We make matching contributions equal to 50% of employee contributions, not to exceed 3% of employee compensation.

We use actuarial models to account for our pension and postretirement plans, which require the use of certain assumptions, such as the expected long-term rate of return, discount rate, rate of compensation increase, healthcare cost trend rates, and retirement and mortality rates, to determine the net periodic costs of such plans. These assumptions are reviewed and set annually at the beginning of each year. In addition, these models use an “attribution approach” that generally spreads individual events, such as plan amendments and changes in actuarial assumptions, over the service lives of the employees in the plan.

We use our actual return experience, future expectations of long-term investment returns, and our actual and targeted asset allocations to develop our expected rate of return assumptions used in the net periodic cost calculations of our funded European defined benefit retirement plans. Due to the difficulty involved in predicting the market performance of certain assets, there will almost always be a difference in any given year between our expected return on plan assets and the actual return. Following the attribution approach, each year’s difference is amortized over a number of future years. Over time, the expected long-term returns are designed to approximate the actual long-term returns and therefore result in a pattern of income and expense recognition that more closely matches the pattern of the services provided by the employees.

We annually set our discount rate assumption for retirement-related benefits accounting to reflect the rates available on high-quality, fixed-income debt instruments. The rate of compensation increase, which is another significant assumption used in the actuarial model for pension accounting, is determined by us based upon our long-term plans for such increases and assumed inflation. For the postretirement health care and life insurance benefits plan, we review external data and its historical trends for health care costs to determine the health care cost trend rates. Retirement and mortality rates are based primarily on actual plan experience.

37

---

 

Actual results that differ from our assumptions are accumulated and amortized over future periods and therefore, generally affect the net periodic costs and recorded obligations in such future periods. While we believe that the assumptions used are appropriate, significant changes in economic or other conditions, employee demographics, retirement and mortality rates, and investment performance may materially impact such costs and obligations.

For more information regarding our pension and other postretirement benefit plans, see Note 8, Retirement and Other Postretirement Benefit Plans, to the accompanying consolidated financial statements of this Annual Report on Form 10-K.

Long-Lived Assets and Goodwill

We have significant long-lived assets. We review these assets for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. The assessment of possible impairment is based upon our ability to recover the carrying value of the assets from the estimated undiscounted future net cash flows, before interest and taxes, of the related operations. If these cash flows are less than the carrying value of such assets, an impairment loss is recognized for the difference between estimated fair value and carrying value. The measurement of impairment requires estimates of these cash flows and fair value. The calculation of fair value is determined based on discounted cash flows. In determining fair value, a considerable amount of judgment is required to determine discount rates, market premiums, financial forecasts, and asset lives.

In addition, we review goodwill for impairment at the reporting unit level at least annually, and whenever events or changes in circumstances indicate that goodwill might be impaired. We have four reporting units within the Composite Materials segment, each of which are components that constitute a business for which discrete financial information is available and for which appropriate management regularly reviews the operating results. Within the Engineered Products segment, the reporting unit is the segment as it comprises only a single component.

Commitments and Contingencies

We are involved in litigation, investigations and claims arising out of the normal conduct of our business, including those relating to commercial transactions, environmental, employment and health and safety matters. We estimate and accrue our liabilities resulting from such matters based upon a variety of factors, including the stage of the proceeding; potential settlement value; assessments by internal and external counsel; and assessments by environmental engineers and consultants of potential environmental liabilities and remediation costs. We believe we have adequately accrued for these potential liabilities; however, facts and circumstances may change, such as new developments, or a change in approach, including a change in settlement strategy or in an environmental remediation plan, or in our existing insurance coverage, that could cause the actual liability to exceed the estimates, or may require adjustments to the recorded liability balances in the future. For further discussion, see Note 16, Commitments and Contingencies, to the accompanying consolidated financial statements of this Annual Report on Form 10-K.

 

Market Risks

As a result of our global operating and financing activities, we are exposed to various market risks that may affect our consolidated results of operations and financial position. These market risks include, but are not limited to, fluctuations in currency exchange rates, which impact the U.S. dollar value of transactions, assets and liabilities denominated in foreign currencies and fluctuations in interest rates, which impact the amount of interest we must pay on certain debt instruments. Our primary currency exposures are in Europe, where we have significant business activities. To a lesser extent, we are also exposed to fluctuations in the prices of certain commodities, such as electricity, natural gas, acrylonitrile, aluminum, and certain chemicals. In addition, we have several contracts with both suppliers and customers that contain pricing adjustments based on the price of oil outside of a specified band.

We attempt to net individual exposures, when feasible, taking advantage of natural offsets. In addition, we employ or may employ interest rate, commodity and foreign currency financial instruments for the purpose of hedging certain specifically identified interest rate, commodity, and currency exposures. The use of these financial instruments is intended to mitigate some of the risks associated with fluctuations in interest rates, commodities and currency exchange rates but does not eliminate such risks. We do not use financial instruments for trading or speculative purposes.

Interest Rate Risks

Outstanding balances that exist under our Facility are included in our long-term debt bears interest at variable rates. From time to time we have entered into interest rate swap agreements to change the underlying mix of variable and fixed interest rate debt. These interest rate swap agreements have modified the percentage of total debt that is exposed to changes in market interest rates.

38

---

 

Assuming a 10% favorable and a 10% unfavorable change in the underlying weighted average interest rates of our variable rate debt and swap agreements, interest expense for 2023 of $34.0 million would not be materially impacted.

Foreign Currency Exchange Risks

We operated twelve manufacturing facilities in Europe, Asia and Africa which generated approximately 50% of our 2023 consolidated net sales. Our European business activities primarily involve three major currencies — the U.S. dollar, the British pound sterling, and the Euro. We also conduct business and sell products to customers throughout the world. Most of the sales in these countries are denominated in U.S. dollars and they have local currency expenses. Currency risk for the Asia and Africa locations is not considered material.

In 2023, our European subsidiaries had third-party sales of $0.9 billion of which approximately 67% were denominated in U.S. dollars, 32% were denominated in Euros and 1% were denominated in British pounds sterling. While we seek to reduce the exposure of our European subsidiaries to their sales in non-functional currencies through the purchase of raw materials in the same currency as that of the product sale, the net contribution of these sales to cover the costs of the subsidiary in its functional currency will vary with changes in foreign exchange rates, and as a result, so will vary the European subsidiaries’ percentage margins and profitability. For revenues denominated in the functional currency of the subsidiary, changes in foreign currency exchange rates increase or decrease the value of these revenues in U.S. dollars, but do not affect the profitability of the subsidiary in its functional currency. The value of our investments in these countries could be impacted by changes in currency exchange rates over time and could impact our ability to profitably compete in international markets.

We attempt to net individual functional currency positions of our various European subsidiaries, to take advantage of natural offsets and reduce the need to employ foreign currency forward exchange contracts. We attempt to hedge some, but not necessarily all, of the net exposures of our European subsidiaries resulting from sales they make in non-functional currencies. The benefit of such hedges varies with time and the foreign exchange rates at which the hedges are set. For example, when the Euro strengthened against the U.S. dollar, the benefit of new hedges placed was much less than the value of hedges they replaced that were entered into when the U.S. dollar was stronger. We may place additional foreign currency hedges when the dollar strengthens against the Euro or British pound. We do not seek to hedge the value of our European subsidiaries’ functional currency sales and profitability in U.S. dollars. We also enter into short-term foreign currency forward exchange contracts, usually with a term of ninety days or less, to hedge net currency exposures resulting from specifically identified transactions. Any unrealized gain or loss on these foreign currency forward exchange contracts would be offset by corresponding decreases or increases, respectively, of the underlying transaction being hedged.

We have performed a sensitivity analysis as of December 31, 2023 using a modeling technique that measures the changes in the fair values arising from a hypothetical 10% adverse movement in the levels of foreign currency exchange rates relative to the U.S. dollar with all other variables held constant. The analysis includes all of our foreign currency hedge contracts. The sensitivity analysis indicated that a hypothetical 10% adverse movement in foreign currency exchange rates would have an approximately $0.9 million impact on our 2023 operating income. However, it should be noted that over time as the adverse movement (in our case a weaker dollar as compared to the Euro or the British pound sterling) continues and new hedges are layered in at the adverse rate, the impact would be more significant. For example, had we not had any hedges in place for 2023, a 10% adverse movement would have reduced our operating income by approximately $26.1 million.

Foreign Currency Forward Exchange Contracts

A number of our European subsidiaries are exposed to the impact of exchange rate volatility between the U.S. dollar and the subsidiaries’ functional currencies, being either the Euro or the British pound sterling. We entered into contracts to exchange U.S. dollars for Euros and British pound sterling through June 2026. The aggregate notional amount of these contracts was $393.3 million at December 31, 2023. The purpose of these contracts is to hedge a portion of the forecasted transactions of European subsidiaries under long-term sales contracts with certain customers. These contracts are expected to provide us with a more balanced matching of future cash receipts and expenditures by currency, thereby reducing our exposure to fluctuations in currency exchange rates. For the three years ended December 31, 2023, hedge ineffectiveness was immaterial. Cash flows associated with these contracts are classified within net cash provided by operating activities of continuing operations.

For further discussion, see Note 15, Derivative Financial Instruments, to the accompanying consolidated financial statements of this Annual Report on Form 10-K.

 

39

---

 

Consolidated Financial Statements and Supplementary Data

Description		Page
Management’s Responsibility for Consolidated Financial Statements		41
Management’s Report on Internal Control Over Financial Reporting		41
Reports of Independent Registered Public Accounting Firm		42
Consolidated Financial Statements of Hexcel Corporation and Subsidiaries:
Consolidated Balance Sheets as of December 31, 2023 and 2022		45
Consolidated Statements of Operations for each of the three years ended December 31, 2023, 2022 and 2021		46
Consolidated Statements of Comprehensive (Loss) Income for each of the three years ended December 31, 2023, 2022 and 2021		46
Consolidated Statements of Stockholders’ Equity for each of the three years ended December 31, 2023, 2022 and 2021		47
Consolidated Statements of Cash Flows for each of the three years ended December 31, 2023, 2022, and 2021		48
Notes to the Consolidated Financial Statements		49

 

 

 

40

---

 

Management’s Responsibility for Consolidated Financial Statements

Hexcel management has prepared and is responsible for the consolidated financial statements and the related financial data contained in this report. These financial statements, which include estimates, were prepared in accordance with accounting principles generally accepted in the United States of America. Management uses its best judgment to ensure that such statements reflect fairly the consolidated financial position, results of operations and cash flows of the Company.

The Audit Committee of the Board of Directors reviews and monitors the consolidated financial statements and accounting policies of Hexcel. These financial statements and policies are reviewed regularly by management and such financial statements are audited by our independent registered public accounting firm, Ernst & Young LLP. The Audit Committee, composed solely of outside directors, meets periodically, separately, and jointly, with management and the independent registered public accounting firm.

Management’s Report on Internal Control Over Financial Reporting

Hexcel management is responsible for establishing and maintaining adequate internal control over financial reporting. Internal control over financial reporting is defined in Rule 13a-15(f) under the Securities Exchange Act of 1934, as amended, as a process designed by, or under the supervision of, the company’s principal executive and principal financial officers and effected by the company’s board of directors, management and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles and includes those policies and procedures that:

Hexcel management has assessed the effectiveness of our internal control over financial reporting as of December 31, 2023. In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control-Integrated Framework (2013). Based on our assessment, management concluded that, as of December 31, 2023, our internal control over financial reporting was effective.

The effectiveness of Hexcel’s internal control over financial reporting, as of December 31, 2023, has been audited by Ernst & Young LLP, an independent registered public accounting firm, as stated in its report that appears on page 43.

 

 

41

---

 

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

To the Stockholders and Board of Directors of Hexcel Corporation

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of Hexcel Corporation and subsidiaries (the Company) as of December 31, 2023 and 2022, the related consolidated statements of operations, comprehensive income (loss), stockholders' equity and cash flows for each of the three years in the period ended December 31, 2023, and the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company at December 31, 2023 and 2022, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2023, in conformity with U.S. generally accepted accounting principles.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company's internal control over financial reporting as of December 31, 2023, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework), and our report dated February 7, 2024 expressed an unqualified opinion thereon

Basis for Opinion

These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB

 

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current period audit of the financial statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective or complex judgments. The communication of the critical audit matter does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

 

		Revenue Recognition
Description of the Matter		The Company’s revenue was $1,789 million for the year ended December 31, 2023. As explained in Notes 1 and 11 to the consolidated financial statements, revenue is predominately derived from a single performance obligation under long-term agreements with customers and pricing is fixed and determinable. The majority of revenue is recognized at a point in time when the customer has obtained control of the product. The principal consideration for our determination that performing procedures relating to revenue recognition is a critical audit matter is the extensive audit effort in performing procedures related to the Company’s revenue recognition.

42

---

 

How We Addressed the Matter in Our Audit		We obtained an understanding, evaluated the design, and tested the operating effectiveness of controls that address the risks of material misstatement relating to revenue recognition. Our procedures included, among others, (i) assessing the completeness, accuracy, and existence of revenue recognized by testing the correlation of revenue to accounts receivable and cash, (ii) testing a sample of revenue transactions by obtaining and inspecting source documents, including purchase orders, invoices, proof of shipment and cash receipts and (iii) confirming a sample of outstanding customer invoice balances, and for confirmations not returned, obtaining and inspecting source documents, including invoices, proof of shipment, and subsequent cash receipts, where applicable. We also evaluated the Company’s revenue recognition disclosures included in Notes 1 and 11.

/s/ Ernst & Young LLP

 

We have served as the Company’s auditor since 2016.

 

Stamford, Connecticut

February 7, 2024

 

43

---

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Stockholders and Board of Directors of Hexcel Corporation

Opinion on Internal Control over Financial Reporting

We have audited Hexcel Corporation and subsidiaries internal control over financial reporting as of December 31, 2023, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) (the COSO criteria). In our opinion, Hexcel Corporation and subsidiaries (the Company) maintained, in all material respects, effective internal control over financial reporting as of December 31, 2023, based on the COSO criteria.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated balance sheets of the Company as of December 31, 2023 and 2022, the related consolidated statements of operations, comprehensive income (loss), stockholders' equity and cash flows for each of the three years in the period ended December 31, 2023, and the related notes and our report dated February 7, 2024 expressed an unqualified opinion thereon.

Basis for Opinion

The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

 

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects.

 

Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

Definition and Limitations of Internal Control Over Financial Reporting

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

/s/ Ernst & Young LLP

 

Stamford, Connecticut

February 7, 2024

 

44

---

 

Hexcel Corporation and Subsidiaries

Consolidated Balance Sheets

As of December 31,

(In millions)		2023			2022
Assets
Current assets:
Cash and cash equivalents		$	227.0		$	112.0
Accounts receivable, net			234.7			222.7
Inventories			334.4			319.3
Contract assets			25.1			32.0
Prepaid expenses and other current assets			43.0			38.9
Assets held for sale			-			9.5
Total current assets			864.2			734.4
Property, plant and equipment			3,195.5			3,087.9
Less accumulated depreciation			(1,516.8	)		(1,430.1	)
Property, plant and equipment, net			1,678.7			1,657.8
Goodwill and other intangible assets			251.3			256.0
Investments in affiliated companies			5.0			47.6
Other assets			119.3			141.5
Total assets		$	2,918.5		$	2,837.3
Liabilities and Stockholders' Equity
Current liabilities:
Short-term borrowings		$	0.1		$	0.2
Accounts payable			159.1			155.5
Accrued compensation and benefits			75.7			69.6
Financial instruments			6.0			22.0
Accrued liabilities			75.0			82.5
Total current liabilities			315.9			329.8
Long-term debt			699.4			723.3
Retirement obligations			42.6			42.7
Deferred income taxes			110.6			126.4
Other non-current liabilities			33.5			60.9
Total liabilities			1,202.0			1,283.1
Stockholders' equity:
Common stock, $0.01 par value, 200.0 shares authorized, 110.8 shares and 110.4 shares    issued at December 31, 2023 and 2022, respectively			1.1			1.1
Additional paid-in capital			936.8			905.0
Retained earnings			2,168.7			2,104.9
Accumulated other comprehensive loss			(74.1	)		(174.4	)
			3,032.5			2,836.6
Less – Treasury stock, at cost, 26.7 shares at December 31, 2023 and 26.2 shares    at December 31, 2022			(1,316.0	)		(1,282.4	)
Total stockholders' equity			1,716.5			1,554.2
Total liabilities and stockholders' equity		$	2,918.5		$	2,837.3

 

The accompanying notes are an integral part of these consolidated financial statements.

 

 

45

---

 

Hexcel Corporation and Subsidiaries

Consolidated Statements of Operations

For the Years Ended December 31,

 

(In millions, except per share data)		2023				2022				2021
Net sales		$	1,789.0			$	1,577.7			$	1,324.7
Cost of sales			1,355.8				1,220.6				1,074.6
Gross margin			433.2				357.1				250.1
Selling, general and administrative expenses			163.8				148.0				135.0
Research and technology expenses			52.7				45.8				45.1
Other operating expense (income)			1.4				(11.9	)			18.2
Operating income			215.3				175.2				51.8
Interest expense, net			34.0				36.2				38.3
Other expense (income)			71.6				(10.8	)			(8.5	)
Income before income taxes, and equity in earnings from affiliated companies			109.7				149.8				22.0
Income tax expense			12.1				31.6				5.9
Income before equity in earnings			97.6				118.2				16.1
Equity in earnings from affiliated companies			8.1				8.1				-
Net income		$	105.7			$	126.3			$	16.1
Basic net income per common share:		$	1.25			$	1.50			$	0.19
Diluted net income per common share:		$	1.24			$	1.49			$	0.19
Weighted-average common shares:
Basic			84.6				84.4				84.1
Diluted			85.5				85.0				84.6
Hexcel Corporation and Subsidiaries
Consolidated Statements of Comprehensive Income (Loss)
For the Years Ended December 31,
(In millions)		2023				2022				2021
Net Income		$	105.7			$	126.3			$	16.1
Currency translation adjustments			29.1				(48.2	)			(26.9	)
Net unrealized pension and other benefit actuarial    loss and prior service credits (net of tax)			50.1				12.6				(21.3	)
Net unrealized gain (loss) on financial instruments (net of tax)			21.1				(12.3	)			(18.7	)
Total other comprehensive (loss) income			100.3				(47.9	)			(66.9	)
Comprehensive income (loss)		$	206.0			$	78.4			$	(50.8	)

 

The accompanying notes are an integral part of these consolidated financial statements.

 

 

46

---

 

Hexcel Corporation and Subsidiaries

Consolidated Statements of Stockholders’ Equity

For the Years Ended December 31, 2023, 2022 and 2021

 

		Common Stock												Accumulated
						Additional								Other								Total
						Paid-In				Retained				Comprehensive				Treasury				Stockholders'
(In millions)		Par				Capital				Earnings				Loss				Stock				Equity
Balance, December 31, 2020		$	1.1			$	849.7			$	1,996.4			$	(59.6	)		$	(1,277.4	)		$	1,510.2
Net income			—				—				16.1				—				—				16.1
Change in other comprehensive income – net of tax			—				—				—				(66.9	)			—				(66.9	)
Stock-based activity			—				28.9				—				—				(2.8	)			26.1
Balance, December 31, 2021		$	1.1			$	878.6			$	2,012.5			$	(126.5	)		$	(1,280.2	)		$	1,485.5
Net income			—				—				126.3				—				—				126.3
Dividends on common stock ($0.40 per share)			—				—				(33.9	)			—				—				(33.9	)
Change in other comprehensive (loss) – net of tax			—				—				—				(47.9	)			—				(47.9	)
Stock-based activity			—				26.4				—				—				(2.2	)			24.2
Balance, December 31, 2022		$	1.1			$	905.0			$	2,104.9			$	(174.4	)		$	(1,282.4	)		$	1,554.2
Net income			—				—				105.7				—				—				105.7
Dividends on common stock ($0.50 per share)			—				—				(41.9	)			—				—				(41.9	)
Repurchases of common stock			—				—				—				—				(30.1	)			(30.1	)
Change in other comprehensive income – net of tax			—				—				—				100.3				—				100.3
Stock-based activity			—				31.8				—				—				(3.5	)			28.3
Year Ended December 31, 2023		$	1.1			$	936.8			$	2,168.7			$	(74.1	)		$	(1,316.0	)		$	1,716.5

 

The accompanying notes are an integral part of these consolidated financial statements.

 

 

47

---

 

Hexcel Corporation and Subsidiaries

Consolidated Statements of Cash Flows

For the Years Ended December 31,

 

(In millions)		2023				2022				2021
Cash flows from operating activities
Net income		$	105.7			$	126.3			$	16.1
Reconciliation to net cash provided by operating activities:
Depreciation and amortization			124.8				126.2				138.0
Amortization of deferred financing costs and debt discount			0.6				0.7				3.1
Deferred income taxes			(32.7	)			(3.1	)			(2.6	)
Equity in earnings from affiliated companies			(8.1	)			(8.1	)			—
Stock-based compensation			20.9				20.0				19.0
Restructuring expenses, net of payments			(4.4	)			(0.7	)			(5.6	)
Pension settlement			70.5				—				—
Gain on sale of assets			(0.8	)			(19.4	)			—
Impairment of assets			3.1				1.6				—
Loss (gain) on sale of investments			3.0				(0.3	)			—
Changes in assets and liabilities:
Increase in accounts receivable			(8.9	)			(62.8	)			(40.7	)
Increase in inventories			(8.9	)			(82.4	)			(40.4	)
Decrease (increase) in prepaid expenses and other current assets			2.6				(8.3	)			13.0
(Decrease) increase in accounts payable/accrued liabilities			(12.2	)			80.8				49.8
Other – net			1.9				2.6				2.0
Net cash provided by operating activities			257.1				173.1				151.7
Cash flows from investing activities
Capital expenditures			(108.2	)			(76.3	)			(27.9	)
Proceeds from sale of assets			10.3				21.2				—
Proceeds from sale of investments			47.2				0.5				—
Net cash used for investing activities			(50.7	)			(54.6	)			(27.9	)
Cash flows from financing activities
Borrowing from senior unsecured credit facility - 2028			98.0				—				—
Repayment of senior unsecured credit facility - 2028			(98.0	)			—				—
Borrowing from senior unsecured credit facility - 2024			65.0				50.0				—
Repayment of senior unsecured credit facility - 2024			(90.0	)			(150.0	)			(103.0	)
Repayment of finance lease obligation and other debt, net			(0.2	)			(0.6	)			(0.9	)
Issuance costs related to senior credit facility			(2.5	)			—				—
Dividends paid			(42.2	)			(33.7	)			—
Repurchase of stock			(30.1	)			—				—
Activity under stock plans			7.4				4.3				7.1
Net cash used for financing activities			(92.6	)			(130.0	)			(96.8	)
Effect of exchange rate changes on cash and cash equivalents			1.2				(4.2	)			(2.6	)
Net increase (decrease) in cash and cash equivalents			115.0				(15.7	)			24.4
Cash and cash equivalents at beginning of period			112.0				127.7				103.3
Cash and cash equivalents at end of period		$	227.0			$	112.0			$	127.7
Supplemental data:
Cash paid during the year for:
Interest, net of capitalized interest		$	34.6			$	35.4			$	36.1
Income Taxes		$	59.1			$	35.9			$	1.2
Accrual basis additions to property, plant and equipment		$	121.6			$	69.8			$	41.4

 

The accompanying notes are an integral part of these consolidated financial statements.

48

---

 

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS

 

 

In December 2023, the FASB issued ASU No. 2023-09, Income Taxes (Topic 240), which modifies the rules on income tax disclosures to require entities to disclose (1) specific categories in the rate reconciliation, (2) the income or loss from continuing operations before income tax expense or benefit disaggregated between domestic and foreign and (3) income tax expense or benefit from continuing operations disaggregated by Federal, state, and foreign. The update also requires entities to disclose their income tax payments to various jurisdictions. This standard is effective for fiscal years beginning after December 15, 2024, and interim periods within fiscal years beginning after December 15, 2025. We do not expect this new standard to have a significant impact to our disclosures.

 

 

 

 

 

 

Note 6– Debt

 

 

 

The annual rate of increase in the per capita cost of covered health care benefits is assumed to be 6.75% for medical rates and are assumed to gradually decline to 4.75% by 2031.

 

 

 

Contract assets as of December 31, 2023, will be billed and reclassified to accounts receivable during 2024. Accounts receivable, net, includes amounts billed to customers where the right to payment is unconditional.

 

 

69

---

 

 

 

 

 

76

---

 

77

---